DBUA is throwing below error in step 1

Hi,
I am trying to upgrade 9.2.0.7 to 10.2.0.
DBUA is throwing below error in step 1:
There is an error in creating the following process: C:\oracle\ora92\bin\sqlplus -s/nolog
The error is: createprocess:C:\oracle\ora92\bin\sqlplus -s/nolog
error:193
I can login as sysdba ,using C:\oracle\ora92\bin\sqlplu for both 9i as well as 10g home
i did set oracle_home to C:\oracle\ora92, using command prompt.
Please suggest what needs to be done. Thanks
Ron

What you have written does not compute.
How many Oracle homes do you have?
If more than 1 ... explain how you can log into 9i and 10g using a single home?
Please explain in detail what document you are following (post a link) and what steps you have taken based on the document.
And why are you upgrading to software that will begin desupport in four weeks? If you are going to put in the effort why not at least get a system that will be fully supported when you are done?

Similar Messages

  • Doing VF01 Invoice third party  system is throwing below error message.

    Hi All,
    After creating Standard PO for third party.
    Doing VF01 Invoice system is throwing below error message.
    Error Log
               5005000511 000010 No open billing quantity has been determined
              Technical data
                  Tech. data details
                   Client                                 200
                   Group Number
                   Sales Document Number                  5005000511
                   Item Number of the SD Document         000010
                   Schedule Line Number                   0147
                   Counter in Control Tables              00
                   Message Identification                 VF
                   System Message Number                  147
                   Output Type                            I
                   Message Variable 01
                   Message Variable 02
                   Message Variable 03
                   Message Variable 04
                   Group Type                             F
    Aditya.

    Hello,
    Please, I have the same issue but in my case it's a Purchase Requisition. First I created a Purchasing info-record for Vendor, Material, Purchasing organization and Plant.
    After I set a Source List Master Data for Material, Plant, Vendor and Purchasing Organization.
    Like this I have the Purchase Requisition created automatically when I create the Sales Order. I am testing a Third Party Handling scenario in Brazil...
    But now I can not create the Billing Document.
    The following error happens:
    "No open billing quantity has been determined"
    Tech. data details
    Client                                 210
    Group Number
    Sales Document Number                  0000000179
    Item Number of the SD Document         000010
    Schedule Line Number                   0147
    Counter in Control Tables              00
    Message Identification                 VF
    System Message Number                  147
    Output Type                            I
    Message Variable 01
    Message Variable 02
    Message Variable 03
    Message Variable 04
    Group Type                             F
    I tried what you suggested but they didn't work. I don't know if I have to create a MIRO for my Purchase Requisition. I tried to release it but it didn't work as well.
    Please, can you help me?
    Thank you,

  • Endeca : multi invoice pay throwing correct error for internal user but it is failing to throw the same error for external user

    Hi,
    1) Internal User expected exception:
    Exception: Payments,apply credits,disputes and print are not supported when multiple customer/currency transactions are selected
    2) External User is throwing below error instead of throwing above exception.
    Error
      You are trying to access a page that is no longer active.
      The referring page may have come from a previous session. Please select Home
       to proceed.
    found this MACCHECK from fnd logs of external user payment.
    MACCHECK: . Parameter failing validation is :mode. The parameter mode with value MultiPay could not be recognized as part of Server's response on the previous request.  Incoming URL is : /OA_HTML/OA.jsp?page=/oracle/apps/ar/irec/endeca/webui/EndecaDummyPG . Current URL is : /OA_HTML/OA.jsp?page=/oracle/apps/ar/irec/endeca/webui/OIREndecaCustHomePG&akRegionApplicationId=222&_ti=1125493452&oapc=10&retainAM=Y&addBreadCrumb=N&oas=6-LL4ndIUFLX-2zjQAQD6A.. . Referer URL is : https://<hostname>:4443/endeca/web/ar/customer?doAsUserLanguageId=en_US&languageId=en_US . HTTP Request Method is : POST
    can someone please help.
    Thanks,
    RRS

    Well, I compared my classpath between my windows batch file and the
    makefile (that comes with the samples installation) on Solaris and realized
    that I am using different sets of jars.
    So, I removed the extra jars from the makefile to narrow down the
    problem. If I remove the /opt/SUNWam/lib/servlet.jar from the makefile,
    I can reproduce this problem on the Solaris box as well.
    When I include this servlet.jar on my windows machine the program works!
    Only jars I have in my classpath are amclientsdk.jar and servlet.jar which
    I have copied from my installation (/opt/SUNWam/lib) on the Solaris box.
    Just the same way, by copying the am_services.jar, saaj-api.jar, and jaxm-api.jar,
    from the Solarix box to the windows machine,
    I am also able to pull the assertions from the Access Manager.
    I installed Sun Java Enterprise System 2005Q1 on a Solaris 10 machine.
    During the installation, I configured to install the Access Manager
    in Sun Application Server.
    Why do I need to have different set of jars on the windows machine
    for the Access Manager client SDK ?
    Could you please point me to a download link where I could download
    the correct Windows Access Manager Client SDK for
    Sun Java System Access Manager 6.0 (Sun JES 2005Q1)?
    Thanks.

  • Optional Parameter - Oracle Package Throws an Error

    Hi there,
    I have an Oracle Package & it has a stored procedure with optional parameter. The calling code is in ColdFusion.
    When I run my webpage the Oracle throws below error.
    " [Macromedia][Oracle JDBC Driver][Oracle]ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'GET_CONTRACT_BY_DYN_SQL' ORA-06550: line 1, column 7: PL/SQL: Statement ignored "
    Calling Code (ColdFusion)
    <cfstoredproc procedure="CONTRACTS_PKG.GET_CONTRACT_BY_DYN_SQL" datasource="#REQUEST.dsn#">
         <cfprocparam cfsqltype="CF_SQL_INTEGER" type="in" value="1" variable="P_CONTRACTID">     
         <cfprocresult name="qDataDynSQL" resultset="1">
    </cfstoredproc>
    <br>Dynamic SQL Query:
    <cfdump var="#qDataDynSQL#" label="Dynamic SQL Query">
    Oracle Package
    create or replace
    PACKAGE CONTRACTS_PKG AS
    TYPE T_CURSOR IS REF CURSOR;
    PROCEDURE GET_CONTRACT_BY_DYN_SQL(P_CONTRACTID IN NUMBER, P_COLS IN VARCHAR2 DEFAULT '*', IO_CURSOR IN OUT T_CURSOR);
    END CONTRACTS_PKG;
    create or replace
    PACKAGE BODY CONTRACTS_PKG AS
    -- Get Contract Using Dynamic SQL
    PROCEDURE GET_CONTRACT_BY_DYN_SQL(P_CONTRACTID IN NUMBER, P_COLS IN VARCHAR2 DEFAULT '*', IO_CURSOR IN OUT T_CURSOR)
    IS
    V_CURSOR T_CURSOR;
    V_SQL VARCHAR2(200);
    BEGIN
    IF p_contractid > 0 THEN
    V_SQL := 'SELECT '|| P_COLS || ' FROM CONTRACTS WHERE contract_id = ' || P_CONTRACTID ;
    ELSE
    V_SQL := 'SELECT '|| P_COLS || ' FROM CONTRACTS';
    END IF;
    OPEN V_CURSOR FOR V_SQL;
    IO_CURSOR := V_CURSOR;
    END GET_CONTRACT_BY_DYN_SQL;
    END CONTRACTS_PKG;
    Does anyone knows why it throws an error? As you can see in the package header & body the parameter P_COLS has the default value as '*'.
    Looking forward to hear from someone.
    Thanks,
    Hitesh Patel

    931198 wrote:
    I have an Oracle Package & it has a stored procedure with optional parameter. The calling code is in ColdFusion.
    When I run my webpage the Oracle throws below error.Never mind the error - your approach is most definitely a candidate for Oracle WTF.
    Nothing sane about this approach. Especially the decision not to use bind variables and slowing down cursor processing significantly by burning a lot more CPU cycles on hard parsing and fragmenting the SQL Shared Pool in the process.
    Why not used MS Access instead? It is far more suited as a mickey mouse database for a goofy application?
    Why am I badmouthing your approach to Oracle? Because that is exactly the primary cause, the #1 reason, for poor Oracle performance and run-time problems dealing with Shared Pool fragmentation. It is something that many Oracle experts blog about, talk about, write about. It is addressed in numerous books, Oracle documentation, and even Oracle Support Notes.
    And despite the amount of information available on how to get the basics rights in using Oracle... this approach you are pursuing still refuses to die. So it deserves to be beaten with a lead pipe when it rears its ugly head here in this forum..

  • Bcp doesnt throw an error when the data length exceeds size of the column

    Hi,
    We are using bcp in SQL 2008 R2 to import the data from flat file. When the data length exceeds the size of the column, it doesn't throw any error instead it has ignored the row.
    Please suggest me how to truncate and load the data into table.
    Thanks,
    Pasha

    Hi Pasha,
    According to your description, you want to import the data from flat file to SQL Server table with truncated data in SQL Server 2008 R2. To achieve your requirement, we can use Import and Export wizard. For more details, please refer to the following steps:
    Launch SSMS by clicking SQL Server Management Studio from the Microsoft SQL Server program group.
    Right click on the destination database in the Object Explorer, select Tasks, then Import Data from the context menu to launch the Import Wizard.
    Choose Flat File Source as Data Source, then browser to the flat file.
    Choose SQL Server Native Client 10.0 as Destination, then select the destination database.
    Click Edit Mappings button to change column size or other properties.
    Finish the processing.
    For the example about how to use Import and Export wizard, please refer to the blog below:
    http://www.mssqltips.com/sqlservertutorial/203/simple-way-to-import-data-into-sql-server/
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Throws validation errors to NWPM

    Hi All,
    I am working on a proxy to jdbc scenario in which we have to throw validation errors to NWPM(Net Weaver Process Monitor Tool)
    I am following the below steps,
    step 1 - In message mapping a UDF is created to catch errors and store them in a variable using dynamic configuration
    step 2 - writing abap mapping for handling this thrown exception and im reading the dynamic configuration in the abap class and raising exception. The exception format expected is
    SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    <SAP:Category>XIServer</SAP:Category>
    <SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
    <SAP:P1>ZPI_THROW_EXCEPTION</SAP:P1>
    <SAP:P2>001</SAP:P2/>
    <SAP:P3>Mandatory field is missingBUKRS </SAP:P3>
    <SAP:AdditionalText />
    <SAP:Stack>No receiver could be determined</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    but while i am trying to  test the data in message mapping it will show one error.
    and with out using abap code it works successfully but while i am adding Abap code in interface mapping it will show the following error.
    "Runtime exception when processing target-field mapping /ns0:MT_DB2_SourcePlant/Record/SourcePlant; root message: Exception:[java.lang.NullPointerException: while trying to invoke the method com.sap.aii.mapping.api.DynamicConfiguration.put(com.sap.aii.mapping.api.DynamicConfigurationKey, java.lang.String) of an object loaded from local variable '<9>'] in class CHRYSLER_com_test_scenario.ErrorHandling method testingError[, 4, , com.sap.aii.mappingtool.tf7.rt.Context@749119e6]"
    I have written the following ABAP code to achieve this:
    method IF_MAPPING~EXECUTE.
    DATA l_record type mpp_dynamic.
    DATA error type String.
    getting dynamic configuration value
    filled in by any previous mapping
    CALL METHOD DYNAMIC_CONFIGURATION->GET_RECORD
    EXPORTING
    NAMESPACE = 'http://sap.com/xi/XI/System/ERROR'
    NAME = 'ERROR'
    RECEIVING
    RECORD = l_record.
    error = l_record-value.
    *raising exception with our message
    RAISE EXCEPTION TYPE CX_MAPPING_FAULT
    EXPORTING
    TEXTID =
    PREVIOUS =
    ERROR_CODE = '001'
    ERROR_TEXT = error .
    RAISE EXCEPTION TYPE CX_MAPPING_FAULT
    EXPORTING
    TEXTID =
    PREVIOUS =
    ERROR_CODE = '003'
    ERROR_TEXT = error .
    endmethod.
    I am gettign the following message for our code:
    SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    <SAP:Category>XIServer</SAP:Category>
    <SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
    <SAP:P1 />
    <SAP:P2 />
    <SAP:P3 />
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:Stack>No receiver could be determined</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    Could you please help in finding the solution for getting currect error message from ABAP class?

    Hello,
    The ABAP code looks ok except the missing if error != null statement.
    Please check the similar code for raising exception provided in the below blog:
    /people/ravi.gupta4/blog/2010/02/04/automating-cancellation-of-a-failed-message-in-xi
    Also, Can you check whether exception is raised using Dynamic config UDF and a call to abap mapping is made.
    Check the other approach of raising an exception:
    /people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
    -Rahul

  • Query throws an error while drilldowning a particular column in production

    Hello Gurus,
    There is an issue in a query when I run it on portal and when I try to drill down one particular column, it throws an error. I am pasting the error message below for your reference. This query works fine when I run in Bex. It also works fine when I run it on Quality portal. It only throws an error when I run it on production portal. I have got the patches and PI checked with BASIS team, everything seems to be fine.
    Please help me out with this issue.
    Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    com.sap.ip.bi.base.application.exceptions
    ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    ABEND: System error in program SAPLRRK0 and form LRECH_01-01- (see long text)
    Regards,

    Hi,
    There are a couple of threads on the same issue.
    Refer to these, just might be handy.
    Re: Uncaught_exception in Report Designer
    Program error in class SAPMSSY1 method  : UNCAUGHT_EXCEPTION in Report
    Good Luck!
    Sandeep Tudumu

  • Editable ALV - how to throw an error message for a specific line & field

    Hi all,
    I've implemented an editable ALV and also the ON_DATA_CHECK event to check the values, entered in the ALV. So this works fine and I can check the values.
    But now, I want to throw an error message corresponding to the field in the ALV, where the error occured.
    How can I throw this error message corresponding to a specific line/field in the ALV?
    I was using REPORT_ATTRIBUTE_ERROR_MESSAGE and REPORT_ELEMENT_ERROR_MESSAGE but without success.
    I'm also using a loop over the "CHANGES" in the ALV and within this loop, I use
    elem_alv = node_alv->get_element( index = <change>-element_index ) 
    to get the element for the message.
    CALL METHOD lo_message_manager->REPORT_ELEMENT_ERROR_MESSAGE
      EXPORTING
        MESSAGE_TEXT              = 'my message'
        ELEMENT                   = elem_alv
    *    ATTRIBUTES                =
    *    PARAMS                    =
    *    MSG_USER_DATA             =
    *    IS_PERMANENT              = ABAP_FALSE
    *    SCOPE_PERMANENT_MSG       = CO_MSG_SCOPE_CTXT_ELEMENT
    *    MSG_INDEX                 =
    *    CANCEL_NAVIGATION         =
    *    IS_VALIDATION_INDEPENDENT = ABAP_FALSE.
    2.) is it right, that for an editable ALV, I can't use the WDDOBEFOREACTION to do the checks?
    If I try to use this, I can't get the values of my ALV table to check it.
    Thanks,
    Andreas

    Hi Andreas,
    I have tried to replicate your problem and I am getting the desired output. I have a row by name TEMP_NEW in my ALV and I want to throw an error message whenever the user enters a value of 4 for that particular field. Please find my coding as below. The important thing is where we perform the actual comparison between the r_value and 4. r_value is defined in SALV_WD_S_TABLE_MOD_CELL as reference to type DATA. So suppose the user enters a value of say 3 in the TEMP_NEW field of the ALV then r_value would contain 3 but if you observe its type in debugging mode it would be as TYPE REF TO I and not TYPE I. So you cannot directly say something like:
    "if ls_modified_cells-r_value = 3" as this would lead to a syntax error. Define a field-symbol say <temp> and then use it to get the actual value into it by saying like:
    ASSIGN ls_modified_cells-r_value->* TO <temp>.
    Then you can use this <temp> for comparison in your IF statement like:
    IF  <temp> = 3.
    Find the entire coding as below:
    METHOD check_data.
      DATA: lr_node TYPE REF TO if_wd_context_node,
            lr_element TYPE REF TO if_wd_context_element,
            ls_modified_cells TYPE salv_wd_s_table_mod_cell.
      FIELD-SYMBOLS <temp> TYPE data.
    " get message manager
      DATA lo_api_controller     TYPE REF TO if_wd_controller.
      DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
      lo_api_controller ?= wd_this->wd_get_api( ).
      CALL METHOD lo_api_controller->get_message_manager
        RECEIVING
          message_manager = lo_message_manager.
      lr_node = wd_context->get_child_node( name = 'NODE' ).
      LOOP AT r_param->t_modified_cells INTO ls_modified_cells.
        lr_element = lr_node->get_element( index = ls_modified_cells-index ).
        IF ls_modified_cells-attribute = 'TEMP_NEW'.
    " Get the value extracted into the field symbol from the reference variable
          ASSIGN ls_modified_cells-r_value->* TO <temp>.
    " Use the value present in this field-symbol for your comparison
          IF  <temp> = 4.
    " report message
            CALL METHOD lo_message_manager->report_attribute_error_message
              EXPORTING
                message_text   = 'Sample message text'
                element        = lr_element
                attribute_name = ls_modified_cells-attribute.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDMETHOD.
    Hope this helps resolve your problem.
    Regards,
    Uday

  • Need help in resolving the below error - SQL statement to execute cannot be

    Here is my CO as below , which creates a callable statement.
    try {
    OAApplicationModule oaapplicationmodule = pageContext.getApplicationModule(webBean);
    OADBTransactionImpl t = (OADBTransactionImpl)oaapplicationmodule.getOADBTransaction();
    OracleCallableStatement proc = (OracleCallableStatement)t.createCallableStatement(lquery, -1);
    proc.execute();
    t.commit();
    catch(SQLException sqlexception)
    throw OAException.wrapperException(sqlexception);
    After running the page , getting the below error ... ( Please find the below error stack )
    I reffered the developement guide but did not get helpful things.
    Please provide me any clues on the same.
    Regards Raghu
    -- Error Stack ---------------------------------------------------------
    Error Page
    Exception Details.
    oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27123: SQL error during call statement preparation. Statement: null
         at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1145)
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1408)
         at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2637)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1659)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at OA.jspService(OA.jsp:40)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
         at java.lang.Thread.run(Thread.java:534)
    ## Detail 0 ##
    java.sql.SQLException: SQL statement to execute cannot be empty or null
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
         at oracle.jdbc.driver.OracleConnection.privatePrepareCall(OracleConnection.java:1138)
         at oracle.jdbc.driver.OracleConnection.prepareCall(OracleConnection.java:1054)
         at oracle.jbo.server.DBTransactionImpl.createCallableStatement(DBTransactionImpl.java:3033)
         at cisco.oracle.apps.xxchr.element.server.webui.XXCHRElementSetSearchCO.processFormRequest(XXCHRElementSetSearchCO.java:343)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:799)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(OAPageLayoutHelper.java:1118)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(OAPageLayoutBean.java:1579)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:995)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:961)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:816)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:995)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:961)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:816)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363)
         at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2633)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1659)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at OA.jspService(OA.jsp:40)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
         at java.lang.Thread.run(Thread.java:534)
    java.sql.SQLException: SQL statement to execute cannot be empty or null
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
         at oracle.jdbc.driver.OracleConnection.privatePrepareCall(OracleConnection.java:1138)
         at oracle.jdbc.driver.OracleConnection.prepareCall(OracleConnection.java:1054)
         at oracle.jbo.server.DBTransactionImpl.createCallableStatement(DBTransactionImpl.java:3033)
         at cisco.oracle.apps.xxchr.element.server.webui.XXCHRElementSetSearchCO.processFormRequest(XXCHRElementSetSearchCO.java:343)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:799)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(OAPageLayoutHelper.java:1118)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(OAPageLayoutBean.java:1579)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:995)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:961)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:816)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:995)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:961)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:816)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363)
         at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2633)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1659)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at OA.jspService(OA.jsp:40)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
         at java.lang.Thread.run(Thread.java:534)
    Edited by: Raghu on Sep 14, 2010 2:58 AM

    check the code pasted by me again
    Connection conn = pageContext.getApplicationModule(webBean).getOADBTransaction().getJdbcConnection();
    Connection conn = oaapplicationmodule.getOADBTransaction().getJdbcConnection(); //Right oneThanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • SUM throws an error at 5.5 Preprocessing MAIN_SHDRUN/ACT_UPG

    Hello everyone,
    While running SUM it throws an error as below:-
    Below are content of ACTUPG.ELG file
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-74009INSAPUI.HCR
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1EEDO519X"DDL Source" "M_V_M2S_PD_ITM" could not be activated
    1EEDO519 "DDL Source" "M_V_M2S_PD_I_C" could not be activated
    1EEDO519 "DDL Source" "M_V_POH_AGGR" could not be activated
    1EEDO519 "DDL Source" "M_V_POH_VAL" could not be activated
    1EEDO519 "DDL Source" "M_V_POH_VAL0" could not be activated
    1EEDO519 "DDL Source" "SADL_V_CDS_ASSOCIATION_COND" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_BUSINESSPARTNER" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_BUSINESSPARTNER_JOIN" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_COMPANY" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_CONTACT" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_DEPTS" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_EMPLOYEES" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_GOODS_ISSUE_HEADER" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_GOODS_ISSUE_ITEM" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_GOODS_RECEIPT_HEADER" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_GOODS_RECEIPT_ITEM" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_LEAVE_REQUEST_HEADER" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_LEAVE_REQUEST_ITEM" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_PO_INVOICE_HEADER" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_PO_INVOICE_ITEM" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_PRODUCT" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_PURCHASEORDER_HEADER" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_PURCHASEORDER_ITEM" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_SALESORDER_HD_JOIN" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_SALESORDER_HEAD" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_SALESORDER_ITEM" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_SALESORDER_JOI" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_SALESORDER_JOIN" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_SO_INVOICE_HEADER" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_SO_INVOICE_ITEM" could not be activated
    1EEDO519 "DDL Source" "SEPM_SDDL_TEXT_ORIGINAL_LANGU" could not be activated
    1 ETP111 exit code : "8"
    I read in thread MAIN_SHRUN/ACT_UPG error
    Followed the suggestion but still the same error occured.
    Checked also http://service.sap.com/sap/support/notes/1976887, http://service.sap.com/sap/support/notes/1298878
    no luck.
    1st run:-
    SUM Version 1.0.12.0
    Kernel 7.42 Patch 28
    OS AIX 7.1
    DB DB2V10.5
    ECC6 EHP7 SPS2 Update to SPS5 [current task using SUM]
    (Same error; restore DB and start from scratch again)
    2nd run:-
    SUM Version 1.0.11.6
    Kernel 7.41 Patch 114
    OS AIX 7.1
    DB DB2V10.5
    ECC6 EHP7 SPS2 Update to SPS5 [current task using SUM]
    (Still same error)
    Message already created to SAP Support, pending their reply.
    Have anyone facing the same issue like me and got the fixes?

    Hello Azra,
    just download the latest tp from service market place and place into sum directory exe folder & continue...
    Regards
    K.Sandeep

  • Good day!   On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09  When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Una

    Good day!
    On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
    When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"

    This happens with any file .
    Send a file with the screen errors and system data . Also send a couple of files PDF.
    Translates only txt format.
    Acrobat установлен: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:43:46
    Браузер по умолчанию:
    Версия BIOS: _ASUS_ - 1072009
    Версия ОС: 6.2.9200 
    Всего виртуальной памяти: 4194176 KB
    Всего физической памяти: 4077252 KB
    Графическая плата: Intel(R) HD Graphics 4000
        Версия: 10.18.10.3412
        Отметить: Не поддерживается
    Доступная виртуальная память: 3638168 KB
    Доступная физическая память: 1689940 KB
    Имя пользователя: Vazgen
    Имя системы: VAZGENTAICHI
    Монитор:
        Название: Intel(R) HD Graphics 4000
        Разрешение: 1920 x 1080 x 60
        Бит на пиксел: 32
    Название ОС: Microsoft Windows Vista
    Папка Windows: C:\WINDOWS
    Папка для временных файлов: C:\Users\Vazgen\AppData\Local\Temp\
    Почтовая программа по умолчанию: Microsoft Outlook
        mapi32.dll
        Версия: 1.0.2536.0 (winblue_rtm.130821-1623)
    Производитель ОС: Microsoft Corporation
    Процессор: Intel64 Family 6 Model 58 Stepping 9 GenuineIntel  ~1696  Mhz
    Сведения о Windows:
       Планшетный ПК: Да
       Начальная версия: Нет
       Media Center Edition: Нет
       Медленный компьютер: Нет
    Сведения о сеансе:
       Тип загрузки: Обычный
       Завершение работы: Нет
       Сеть: Доступно
       Внутри Citrix: Нет
       Внутри VMWare: Нет
       Удаленный сеанс: Нет
       Удаленное управление: Нет
       Использование JAWS: Нет
       Использование Windows-Eyes: Нет
       Использование NVDA: Нет
    Сведения об Acrobat:
       Изолирование программной среды: Отключить
       Связанная программа для чтения: Нет
       Multi-Reader с поддержкой Desktop: Отключить
    Сведения об отображении:
       Ширина экрана: 1920
       Высота экрана: 1080
       Число мониторов: 2
       Число кнопок мыши: 2
       Мышь с колесом прокрутки: Нет
       С маркером Windows: Нет
       Двухбайтовая кодировка: Нет
       С редактором метода ввода: Да
       В программе для чтения с экрана: Нет
    Сведения об учетной записи:
       Права пользователя: Администратор
       Управление учетной записью пользователя: Ограниченное
       Целостность процесса: Не определено
       Тип профиля: Отсутствует
    Установленные приложения:
       Версия Office: Office 2013 32-bit
    Файл подкачки: 4194303 KB
    Часовой пояс: Московское время (зима)
    Язык: Русский (Россия)
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Accessibility.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:44:20
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Annots.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:44:22
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\IA32.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:44:18
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\PaperCapture.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:43:36
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SaveAsRTF.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:44:20
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:44:20
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Updater.api
        Версия: 11.0.9.29
      Дата создания: 2014/09/12
        Время создания: 13:44:22

  • CF 8 CFPDF "Merged" document throws 131 Error when opened in Acrobat

    We are using CF 8 on Windows Server 2003 platform.
    Any CFPDF "Merged" documents are throwing 131 Errors when opened in Acrobat
    Tried re-saving the documents on local machine and still same problem. Tried opening in multiple versions of Acrobat, same problem.
    Individual documents created are opening without issue. It is Only when these documents are merged that this error occurs.
    We do not experience this behavior in our CF 10 environment.
    We are a Big, Slow moving enterprise here so not much chance of getting our CF 10 environments promoted to meaningful production use soon.
    Found virtually nothing in HelpX and nothing online of any value regarding this issue.
    Has anyone else experienced the issue noted in the title of this discussion?
    Has anyone a work around or solution?

    I am getting the same error even in Acrobat version 8.1.3.
    Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking  ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
    Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
    Code 4002: PDF content contains erros.
    However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
    Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
    Awaiting reply!
    Regards.

  • DBMS_LOB.ISOPEN throws the error ora-22275 invalid lob locator

    DBMS_LOB.ISOPEN throws the error below error.
    ora-22275 invalid lob locator
    The below assume that i am getting the v_lob_length as empty. But i am getting error when it comes to DBMS_LOB.ISOPEN.
    Please correct me if i am wrong.
    here is my code:
    DBMS_LOB.createtemporary(v_xml_clob, TRUE);
    DBMS_LOB.open(v_xml_clob, DBMS_LOB.lob_readwrite);
    SELECT  DBMS_XMLGEN.getxml ('SELECT object_name, object_type from dba_objects where rownum <= 5')
    INTO    v_xml_clob
    FROM    DUAL;
    v_lob_length    := NVL(DBMS_LOB.getlength(v_xml_clob),0);
    v_index       := 1;
    fnd_file.put_line(fnd_file.log,'v_lob_length : '||v_lob_length);
    WHILE v_index <= v_lob_length
    LOOP
        v_read_cnt   := 32767;
        DBMS_LOB.read (
              v_xml_clob,
              v_read_cnt,
              v_index,
              v_chunk
        fnd_file.put(fnd_file.output,v_chunk);
        v_index := v_index + v_read_cnt;
    END LOOP;
    IF DBMS_LOB.ISOPEN(v_xml_clob) = 1
    THEN
        DBMS_LOB.close(v_xml_clob);
        DBMS_LOB.freetemporary(v_xml_clob);
    END IF;

    Most likely v_xml_clob is NULL so you'd rather check IF v_xml_clob IS NOT NULL AND DBMS_LOB.ISOPEN(v_xml_clob) = 1
    THENbye
    TPD

  • Error at Step 9 of 32 while Installing CE7.11 Trail Version.

    Hi All,
    i am getting the following error while installing CE 7.1 SP1 Downloaded from sdn.. download area...
    I am using Windows 64 Bit.. I also tried with Windows 7 64bit OS..AStill the same....
    Running msiexec failed with return code 1603: undefined
    Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
    If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
    I reinstalled the OS again but still the same error.. Windows Installer is up and running in Services....
    Hence I found one thread where to install MMC Snapshot then Install CE 7.1... I am able to pass through Step 4 of 32 installation... But got an error at step 9 of 32 Data base server Installtion error:
    An error occurred while processing option SAP NetWeaver CE Developer Edition > Install SAP NetWeaver CE Developer Edition( Last error reported by the step :The database installer reported an error. DIAGNOSIS: Some database applications might still be running. SOLUTION: Check the log file sdbinst.log and C:\sapdb\data\wrk\MaxDB...>install _ .log.). You can now:
    Choose Retry to repeat the current step.
    Choose View Log to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:\Program Files (x86)/sapinst_instdir/CE71_DEV_ADA/INSTALL
    Log is as below:
    Installation of MaxDB
    starting installation Fr, Feb 19, 2010 at 22:55:11
    operating system: Windows AMD64 NT 6.1
    callers working directory: C:/Program Files (x86)/sapinst_instdir/CE71_DEV_ADA/INSTALL
    installer directory: D:/Softwares/CE711SP1_SDN-Preview/CompEnv/MAXDB_WINDOWS_I386
    archive directory: D:/Softwares/CE711SP1_SDN-Preview/CompEnv/MAXDB_WINDOWS_I386
    software in package Fastload API is not runnable on your system
    FILE MAGIC: MS Windows 32-bit i386 executable dll
    YOUR SYSTEM: architecture = AMD64
    YOUR SYSTEM: subversion =
    YOUR SYSTEM: system = Windows
    YOUR SYSTEM: version = NT 6.1
    installation exited abnormally at Fr, Feb 19, 2010 at 22:55:11
    Any Solution for this?
    Thanks
    Rajeev

    Hi Russ,
    I did not resolve that problem
    Regards.
    hari

  • Query is throwing an error like missing right paranthesis.,

    Hi,
    The below query is throwing an error like missing right paranthesis.,
    and Is there any way to write the same query in a simpler way ?
    SELECT AVALABLEBALANCE
    FROM (
    ( SELECT SUM(TH1.TRANSACTIONAMOUNT)
    FROM TRANSACTIONHISTORY TH1,
    TRANSACTIONTYPE TT,
    CARDDETAIL CD,
    P2P_CARDDETAIL P2P
    WHERE TH1.TRANSACTIONTYPEID = TT.TRANSACTIONTYPEID
    AND TH1.CARDID = CD.CARDID
    AND CD.CARDID = P2P.CARDID
    AND TH1.CARDID = 6013
    AND TT.TRANSACTIONTYPECODE IN ('WITHDRAWAL_CHECK_FEE')
    AND TRUNC(TH1.TRANSACTIONDATETIME) = TRUNC(TH3.TRANSACTIONDATETIME)
    GROUP BY TH1.TRANSACTIONTYPEID,TH1.CARDID,TRUNC(TH1.TRANSACTIONAMOUNT)) -
    ( SELECT SUM(TH2.TRANSACTIONAMOUNT)
    FROM TRANSACTIONHISTORY TH2,
    TRANSACTIONTYPE TT,
    CARDDETAIL CD,
    P2P_CARDDETAIL P2P
    WHERE TH2.TRANSACTIONTYPEID = TT.TRANSACTIONTYPEID
    AND TH2.CARDID = CD.CARDID
    AND CD.CARDID = P2P.CARDID
    AND TH2.CARDID = 6013
    AND TT.TRANSACTIONTYPECODE IN ('FUND_TRANSFER_RECEIVED')
    AND TRUNC(TH2.TRANSACTIONDATETIME) = TRUNC(TH3.TRANSACTIONDATETIME)
    GROUP BY TH2.TRANSACTIONTYPEID,TH2.CARDID,TRUNC(TH2.TRANSACTIONAMOUNT))
    ) T , TRANSACTIONHISTORY TH3
    WHERE TH3.CARDID = 6013

    Hi Sekar,
    Here is your formatted code:
    /* Formatted on 2007/11/16 16:42 (Formatter Plus v4.8.0) */
    SELECT avalablebalance
    FROM ((SELECT SUM (th1.transactionamount)
    FROM transactionhistory th1,
    transactiontype tt,
    carddetail cd,
    p2p_carddetail p2p
    WHERE th1.transactiontypeid = tt.transactiontypeid
    AND th1.cardid = cd.cardid
    AND cd.cardid = p2p.cardid
    AND th1.cardid = 6013
    AND tt.transactiontypecode IN ('WITHDRAWAL_CHECK_FEE')
    AND TRUNC (th1.transactiondatetime) =
    TRUNC (th3.transactiondatetime)
    GROUP BY th1.transactiontypeid,
    th1.cardid,
    TRUNC (th1.transactionamount))
    MINUS
    (SELECT SUM (th2.transactionamount)
    FROM transactionhistory th2,
    transactiontype tt,
    carddetail cd,
    p2p_carddetail p2p
    WHERE th2.transactiontypeid = tt.transactiontypeid
    AND th2.cardid = cd.cardid
    AND cd.cardid = p2p.cardid
    AND th2.cardid = 6013
    AND tt.transactiontypecode IN ('FUND_TRANSFER_RECEIVED')
    AND TRUNC (th2.transactiondatetime) =
    TRUNC (th3.transactiondatetime)
    GROUP BY th2.transactiontypeid,
    th2.cardid,
    TRUNC (th2.transactionamount))) t,
    transactionhistory th3
    WHERE th3.cardid = 6013
    -Edit: Lol this forum's text box does not have a proper formatter to show our codes perfectly :(.. Very sorry about the expected format here.. Lol !!
    ***Lol Poor Format***
    Message was edited by:
    user599090
    I replaced the '-' with MINUS Keyword. That was the mistake you made i guess.

Maybe you are looking for

  • I USE TO BRAG THAT I WAS A VERIZON CUSTOMER...

    48 hours passed by with no call from a Verizon manager AGAIN. I am REALLY REALLY upset that no one wants to even talk to me about my issue. This is the WORST customer service I have ever experienced. I am really unhappy with Verizon . They have made

  • Unresponsive iTunes under Vista

    Have used iTunes with 3 iPods in the house on XP for years. No issues -- worked flawlessly. Purchased a brand new primary machine for the main floor of our home, running Windows Vista Home Premium. Everything on this thing runs stinking fast, but iTu

  • Powerbook cannot detect Airport Extreme base station

    I bought a new Airport extreme and cannot connect to it wirelessly. I called and tried to do everything to fix the problem but ended up having to have a replacement Airport sent to me. The new one arrives and same problem. I can see other wireless ne

  • AMD Drivers in macbook pro?

    Hello to all, I have macbook pro (Late 2011) AMD 6770m graphics. I installed Windows 8 via BootCamp. My question is if I install Catalyst Software (Latest 13.1) from AMD site then: Will it cause the crashing of Windows 8?.I am asking this because las

  • Timestamp in minutes on case condition

    Hi Gurus, I wanted to find the diff between two timestamp in minutes on case condition when type=1 then min(col2) and type=2 then max(col2) type-(datatype-numeric) col2-(datatype-timestamp) how can i do this Thanks