DC's and Configuration Models
I wish to define a configuration model with an associated model class within a Distributed Component (DC). However, when I go to reuse the model in another DC, the behaviour of a configuration model is different than an Adpative RFC or web service model.
ie. When I make an Adaptive RFC Model a public part, the associated classes beneath this are made available and everything works fine. But when I do the same with a configuration model, the model class does not come with the model.
I can get the model class to appear by manually adding the .wdmodelclass file to the public parts, but that of course doesn't work as the generated java class does not come across with it.
Has anyone exposed configuration models in DC's before and know how to get around this apparent bug?
note - I posted this on an old post, but thought it better to raise as a new question.
Hi Matt,
i've seen this after my posting to the other thread you mentioned, so forget about my question there.
Well as i understand (from my own observations, since they are not really documented yet), configuration models are something special and obviously dedicated to be "private" for a component, therefore the implementation classes are not exposed, i guess.
Since you are also familiar with the ABAP world, as i know from previous postings, you know the possibility to configure the application behaviour for reports for example by creating Variants (i hope this is correct, it's "Varianten" in German). The configuration models seem to be the corresponding part of Web Dynpro components.
If you list the applications of the WD-tools in the WD content admin, you see an "Editor" entry. If you start this application and select an arbitrary component, you'll see, that only the configuration models are exposed for editing (i didn't get it to work, the Editor seems not to be completely implemented so far).
Back to your question, if it's possible to expose the Java package tree of the generated common model implementation in the "Entries" editor of your PP definition, does it work then?
Regards
Stefan
Similar Messages
-
Hi,
Could someone help me in the setup and configuration of NI OPC server to OMRON PLC (CJ2H model) using FINS Ethernet communication protocol? I already read some materials available in the web but it uses a different PLC and communication protocol. The OPC server is installed in my laptop and I'm using Windows 8 as my OS. I used a cross over RJ45 LAN cable and connected to the ETN21 module of the PLC. I was able to confirmed the communication of my laptop and PLC by pinging the ip address of the ETN21. I also tried to configure the OPC server based on the documents I just read online. I created a channel, device and tag to the OPC server. By the way, I just need to read the data from the tag I created. Can someone also tell me how to monitor the data on the tag? I hope that you could help me. Thank you in advance.Good day,
Try following the instructions on the driver’s help, take a look at the attach picture. It should be a good starting point. After the PLC is configured you can use this tutorial (Connect LabVIEW to Any PLC Using OPC » http://www.ni.com/white-paper/7450/en/) for a guide on how to monitor the tags.
I hope this helps
Alejandro | Academic Program Engineer | National Instruments
Attachments:
OPC Server Help.JPG 237 KB -
Model no, ios version and configuration
Hi frienz.
i juz received used apple laptop. i wan to knw Model no, ios version and configuration kind of things. can anyone help me ? share me if any interested things too. thank you frienz
Regards
Karthick abu
IndiaTry to force it into recovery mode to restore it, as explained here: http://support.apple.com/kb/ht1808.
-
Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
Below are details of my pc.
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name ...........-HP
System Manufacturer Hewlett-Packard
System Model HP ProBook 4530s
System Type x64-based PC
Processor Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
SMBIOS Version 2.6
Windows Directory C:\windows
System Directory C:\windows\system32
Boot Device \Device\HarddiskVolume1
Locale United Kingdom
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name ...........-HP\................
Time Zone South Africa Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.94 GB
Available Physical Memory 1.00 GB
Total Virtual Memory 7.87 GB
Available Virtual Memory 1.25 GB
Page File Space 3.94 GB
Page File C:\pagefile.sysTo clarify further.... It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine. In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows. If you are using a 64bit OS, you must install the 64bit software. Again, this would include Forms/Reports, WLS, and JDK
-
To create and configure a community in a customized UI
Hi,
We are currently working on a customized UI where the client can create and configure a community in WCI.
Is there any possibility to call several special APIs like 'Get, Create and Modify Experience Definition', 'Get, Create and Modify Community Template', 'Create Rule Manager' and so on.
If there is, please give me an example or correlative API docs.
Thanks for any help in advance.Yes this is all possible.
The only api you could use to perform these functions is the server api. But you will find there is very little documentation on this api. Your best bet is to use something like the .net reflector to "take a peek" at how the server api is used within the portal views and models or just download the UICI Portal source code.
If you are feeling a bit crazy, go to google and type "iptsession" and hit I'm Feeling Lucky :-)
you should get through to the server api reference documentation. Most people struggle with first initialising the api and creating a session. I believe there is a blog post about this online. Use the method described above and I am sure you will find what you are looking for. -
CONCURRENT MANAGER SETUP AND CONFIGURATION REQUIREMENTS IN AN 11I RAC ENVIR
제품 : AOL
작성날짜 : 2004-05-13
PURPOSE
RAC-PCP 구성에 대한 Setup 사항을 기술한 문서입니다.
PCP 구현은 CM의 workload 분산, Failover등을 목적으로 합니다.
Explanation
Failure sceniro 는 다음 3가지로 구분해 볼수 있습니다.
1. The database instance that supports the CP, Applications, and Middle-Tier
processes such as Forms, or iAS can fail.
2. The Database node server that supports the CP, Applications, and Middle-
Tier processes such as Forms, or iAS can fail.
3. The Applications/Middle-Tier server that supports the CP (and Applications)
base can fail.
아래부분은 CM,AP 구성과
CM과 GSM(Global Service Management)과의 관계를 설명하고 있습니다.
The concurrent processing tier can reside on either the Applications, Middle-
Tier, or Database Tier nodes. In a single tier configuration, non PCP
environment, a node failure will impact Concurrent Processing operations do to
any of these failure conditions. In a multi-node configuration the impact of
any these types of failures will be dependent upon what type of failure is
experienced, and how concurrent processing is distributed among the nodes in
the configuration. Parallel Concurrent Processing provides seamless failover
for a Concurrent Processing environment in the event that any of these types of
failures takes place.
In an Applications environment where the database tier utilizes Listener (
server) load balancing is implemented, and in a non-load balanced environment,
there are changes that must be made to the default configuration generated by
Autoconfig so that CP initialization, processing, and PCP functionality are
initiated properly on their respective/assigned nodes. These changes are
described in the next section - Concurrent Manager Setup and Configuration
Requirements in an 11i RAC Environment.
The current Concurrent Processing architecture with Global Service Management
consists of the following processes and communication model, where each process
is responsible for performing a specific set of routines and communicating with
parent and dependent processes.
아래 내용은 PCP환경에서 ICM, FNDSM, IM, Standard Manager의 역활을 설명하고
있습니다.
Internal Concurrent Manager (FNDLIBR process) - Communicates with the Service
Manager.
The Internal Concurrent Manager (ICM) starts, sets the number of active
processes, monitors, and terminates all other concurrent processes through
requests made to the Service Manager, including restarting any failed processes.
The ICM also starts and stops, and restarts the Service Manager for each node.
The ICM will perform process migration during an instance or node failure.
The ICM will be
active on a single node. This is also true in a PCP environment, where the ICM
will be active on at least one node at all times.
Service Manager (FNDSM process) - Communicates with the Internal Concurrent
Manager, Concurrent Manager, and non-Manager Service processes.
The Service Manager (SM) spawns, and terminates manager and service processes (
these could be Forms, or Apache Listeners, Metrics or Reports Server, and any
other process controlled through Generic Service Management). When the ICM
terminates the SM that
resides on the same node with the ICM will also terminate. The SM is ?hained?
to the ICM. The SM will only reinitialize after termination when there is a
function it needs to perform (start, or stop a process), so there may be
periods of time when the SM is not active, and this would be normal. All
processes initialized by the SM
inherit the same environment as the SM. The SM environment is set by APPSORA.
env file, and the gsmstart.sh script. The TWO_TASK used by the SM to connect
to a RAC instance must match the instance_name from GV$INSTANCE. The apps_<sid>
listener must be active on each CP node to support the SM connection to the
local instance. There
should be a Service Manager active on each node where a Concurrent or non-
Manager service process will reside.
Internal Monitor (FNDIMON process) - Communicates with the Internal Concurrent
Manager.
The Internal Monitor (IM) monitors the Internal Concurrent Manager, and
restarts any failed ICM on the local node. During a node failure in a PCP
environment the IM will restart the ICM on a surviving node (multiple ICM's may
be started on multiple nodes, but only the first ICM started will eventually
remain active, all others will gracefully terminate). There should be an
Internal Monitor defined on each node
where the ICM may migrate.
Standard Manager (FNDLIBR process) - Communicates with the Service Manager and
any client application process.
The Standard Manager is a worker process, that initiates, and executes client
requests on behalf of Applications batch, and OLTP clients.
Transaction Manager - Communicates with the Service Manager, and any user
process initiated on behalf of a Forms, or Standard Manager request. See Note:
240818.1 regarding Transaction Manager communication and setup requirements for
RAC.
Concurrent Manager Setup and Configuration Requirements in an 11i RAC
Environment
PCP를 사용하기위한 기본적인 Setup 절차를 설명하고 있습니다.
In order to set up Setup Parallel Concurrent Processing Using AutoConfig with
GSM,
follow the instructions in the 11.5.8 Oracle Applications System Administrators
Guide
under Implementing Parallel Concurrent Processing using the following steps:
1. Applications 11.5.8 and higher is configured to use GSM. Verify the
configuration on each node (see WebIV Note:165041.1).
2. On each cluster node edit the Applications Context file (<SID>.xml), that
resides in APPL_TOP/admin, to set the variable <APPLDCP oa_var="s_appldcp">
ON </APPLDCP>. It is normally set to OFF. This change should be performed
using the Context Editor.
3. Prior to regenerating the configuration, copy the existing tnsnames.ora,
listener.ora and sqlnet.ora files, where they exist, under the 8.0.6 and iAS
ORACLE_HOME locations on the each node to preserve the files (i.e./<some_
directory>/<SID>ora/$ORACLE_HOME/network/admin/<SID>/tnsnames.ora). If any of
the Applications startup scripts that reside in COMMON_TOP/admin/scripts/<SID>
have been modified also copy these to preserve the files.
4. Regenerate the configuration by running adautocfg.sh on each cluster node as
outlined in Note:165195.1.
5. After regenerating the configuration merge any changes back into the
tnsnames.ora, listener.ora and sqlnet.ora files in the network directories,
and the startup scripts in the COMMON_TOP/admin/scripts/<SID> directory.
Each nodes tnsnames.ora file must contain the aliases that exist on all
other nodes in the cluster. When merging tnsnames.ora files ensure that each
node contains all other nodes tnsnames.ora entries. This includes tns
entries for any Applications tier nodes where a concurrent request could be
initiated, or request output to be viewed.
6. In the tnsnames.ora file of each Concurrent Processing node ensure that
there is an alias that matches the instance name from GV$INSTANCE of each
Oracle instance on each RAC node in the cluster. This is required in order
for the SM to establish connectivity to the local node during startup. The
entry for the local node will be the entry that is used for the TWO_TASK in
APPSORA.env (also in the APPS<SID>_<HOSTNAME>.env file referenced in the
Applications Listener [APPS_<SID>] listener.ora file entry "envs='MYAPPSORA=<
some directory>/APPS<SID>_<HOSTNAME>.env)
on each node in the cluster (this is modified in step 12).
7. Verify that the FNDSM_<SID> entry has been added to the listener.ora file
under the 8.0.6 ORACLE_HOME/network/admin/<SID> directory. See WebiV Note:
165041.1 for instructions regarding configuring this entry. NOTE: With the
implementation of GSM the 8.0.6 Applications, and 9.2.0 Database listeners
must be active on all PCP nodes in the cluster during normal operations.
8. AutoConfig will update the database profiles and reset them for the node
from which it was last run. If necessary reset the database profiles back to
their original settings.
9. Ensure that the Applications Listener is active on each node in the cluster
where Concurrent, or Service processes will execute. On each node start the
database and Forms Server processes as required by the configuration that
has been implemented.
10. Navigate to Install > Nodes and ensure that each node is registered. Use
the node name as it appears when executing a nodename?from the Unix prompt on
the server. GSM will add the appropriate services for each node at startup.
11. Navigate to Concurrent > Manager > Define, and set up the primary and
secondary node names for all the concurrent managers according to the
desired configuration for each node workload. The Internal Concurrent
Manager should be defined on the primary PCP node only. When defining the
Internal Monitor for the secondary (target) node(s), make the primary node (
local node) assignment, and assign a secondary node designation to the
Internal Monitor, also assign a standard work shift with one process.
12. Prior to starting the Manager processes it is necessary to edit the APPSORA.
env file on each node in order to specify a TWO_TASK entry that contains
the INSTANCE_NAME parameter for the local nodes Oracle instance, in order
to bind each Manager to the local instance. This should be done regardless
of whether Listener load balancing is configured, as it will ensure the
configuration conforms to the required standards of having the TWO_TASK set
to the instance name of each node as specified in GV$INSTANCE. Start the
Concurrent Processes on their primary node(s). This is the environment
that the Service Manager passes on to each process that it initializes on
behalf of the Internal Concurrent Manager. Also make the same update to
the file referenced by the Applications Listener APPS_<SID> in the
listener.ora entry "envs='MYAPPSORA= <some directory>/APPS<SID>_<HOSTNAME>.
env" on each node.
13. Navigate to Concurrent > Manager > Administer and verify that the Service
Manager and Internal Monitor are activated on the secondary node, and any
other addititional nodes in the cluster. The Internal Monitor should not be
active on the primary cluster node.
14. Stop and restart the Concurrent Manager processes on their primary node(s),
and verify that the managers are starting on their appropriate nodes. On
the target (secondary) node in addition to any defined managers you will
see an FNDSM process (the Service Manager), along with the FNDIMON process (
Internal Monitor).
Reference Documents
Note 241370.1What is your database version? OS?
We are using VCP suite for Planning Purpose. We are using VCP environment (12.1.3) in Decentralized structure connecting to 3 differect source environment ( consisting 11i and R12). As per the Oracle Note {RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156]} we have implemented RAC in our test environment to get better performance.
But after doing all the setups and concurrent programs assignment to different nodes, we are seeing huge performance issue. The Complete Collection which takes generally on an avg 180 mins in Production, is taking more than 6 hours to complete in RAC.
So I would like to get suggestion from this forum, if anyone has implemented RAC in pure VCP (decentralized) environment ? Will there be any improvement if we make our VCP Instance in RAC ?Do you PCP enabled? Can you reproduce the issue when you stop the CM?
Have you reviewed these docs?
Value Chain Planning - VCP - Implementation Notes & White Papers [ID 280052.1]
Concurrent Processing - How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration [ID 762024.1]
How to Setup and Run Data Collections [ID 145419.1]
12.x - Latest Patches and Installation Requirements for Value Chain Planning (aka APS Advanced Planning & Scheduling) [ID 746824.1]
APSCHECK.sql Provides Information Needed for Diagnosing VCP and GOP Applications Issues [ID 246150.1]
Thanks,
Hussein -
HT4061 what is the diffarent iPad 4g and iPad model number md523ty ?
what is the diffarent iPad 4g and iPad model number md523ty ?
The MD523TY iPad is one of the configurations of the fourth generation models. Click here for more information.
(81265) -
Problem in populating configuration model
Hi,
We are trying to populate a BOM model in oracle configurator, for this we have performed following steps:
1. Created Items in Item Master
2. Created BOM structure in Bills of Materials
3. Exploded the BOM structure from sales order screen as we have different environment for configurator.
4. Submitted concurrent program: Populate Configuration Models for top model (TEST_CONTAINER, we have set it as container model).
Now the problem is, only the container item (TEST_CONTAINER) is visible in Oracle configurator Developer and its structure is missing.
BOM SETUP:
TEST_CONTAINER
XX_TEST_INSTALLATION
XX_TEST_A
XX_TEST_B
XX_TEST_C
Appreciate if anyone provide valuable inputs in this regards.
Thanks,
AnupamThat is a little bit odd. EBS installations typically need at least 2 orgs. One org is the master org and then at least one child org where most of the transactions are performed.
What is the org (warehouse) on the sales order line? Is it the same as master?
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant -
Disabling shipping details for configurator model item in istore.
Hi all,
I am working in istore implementation process in R12. I got some Issues while using using Configurator ATO model item in istore. If we disable the"Shippable" flag for single item means, it was "NON-Shippable" item, And we never get any shipping information in istore.
This process is working fine in istore , for using single items.
But the same process is not working for configurable model in istore.
For this process i disabled all configurator model sub-items "shippable" flag, And all are non_shippable
But when i configure ATO model in istore i got all shipping details. +(Like shipping page, shipping address, etc).+
Could you please help me on this, how to avoid shipping details for configurator item in istore.
Please help..
Thanks,
Prab.Please check the table ASO_SHIPMENTS
It stores shipping information for a quote at header level or line level. At header level means the shipping information is the same for all the quote lines, therefore the quote_line_id is null. At line level means each line has its own shipping information. At line level, it can further break down at line quantity level if the quantity in ASO_SHIPMENTS is different than in ASO_QUOTE_LINES_ALL.
Please check the above table and see which live is having the details in it. This way u can narrow down the issue,
Thanks
Pradeep -
How to install and configure nwportal7.3
HI
Can any one guide me how to install and configure nwportal, main objective of the configuration is i want to install ess and mss components,
for this what components i have to install in portal. can any one guide how to find the nwportal installation guide
regards
vredddyI reported this to the moderators since clearly you didn't spend 5 minutes trying to search for the guides yourself. However, for some reason the moderators didn't agree with my report. Anyway, what operating system and database would the portal be running on? See the this link for a list of installation guides. When installing portal select at least AS, EP, EPC, BASIC and NW-MODEL usage types. After portal has been installed, you can start installing and configuring ESS and MSS. The next steps depend on your ERP release. Which is what? Include EHP level whether MSS Add-On or HR Renewal is installed (assuming pre EHP7). You might have to deploy business packages on your portal and you might have to activate business functions in your ERP system. Since there are so many variables, you won't find one guide that gives all the instructions. You will have to read the application help and blogs/documents/discussion threads on SCN for instructions.
-
How to install and configure visual composer
hai experts,
any one help me to install and configure the visual composer. and also tell me the procedure for installation and configuration.plz help me.
regards,
puagzh.Hi raj,
Installing Visual Composer.
Enterprise Portal 6.0
EP 6.0 SP2 (on Web AS 6.20): patch4 or higher
EP 6.0 on Web AS 6.40: SP Stack 05
Add-ons (integrated in EP 6.0 SP2 Patch 5 and higher and in EP 6.0 on Web AS 6.40 SP Stack 05 and higher)
2 Portal Add-ons for design time portal
2 Portal Add-ons for BI Kit (only in EP 6.0 on Web AS 6.40 SP Stack 05)
Runtime Add-on for run time portal
For VC BI Kit: Deploy BI UDI SP Stack 05 to the J2EE Engine of the Portal
Visual Composer Server (can be on same server as portal)
Windows 2000 Server
MS SQL Server 2000 SP3 as Data Persistence
MS IIS 5.0
Microsoft XML Parser 4.0
Visual Composer Client (design time)
Microsoft Internet Explorer 6.0 SP1 or higher
Microsoft XML Parser 4.0
Adobe SVG Viewer 3.0
Visual Composer Client (run time)
Content created by VC 6.0 runs on any clients supported by portal version it is running on (see PAM for Details)
The SAP NetWeaver Visual Composer for the EP 6.0 is installed in two steps:
SAP NetWeaver Visual Composer Storyboard Install for SAP EP 6.0
SAP NetWeaver Visual Composer Add-ons for SAP EP 6.0
Install the story Board
Assign IIS virtual Directories
You can install addins
The SAP NetWeaver Visual Composer Add-on for SAP EP 6.0 is installed on the Portal Server.
Main activities performed during the install are:
Installing a rar file (Resource Adaptor Archive) using EISConnector (Enterprise Information System Connector) in SAP J2EE
Installing a NetWeaver kit for SAP EP 6.0
Open the browser with the following url
http://<machine_name>.<domain>:<port>/VCServer
For more information How to eork check these links.
What is Visual Composer? User Guide
http://help.sap.com/saphelp_nw04/helpdata/en/01/4b7e40417c6d1de10000000a1550b0/frameset.htm
SAP NetWeaver Visual Composer - How to Guides
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
Creating Applications Using SAP NetWeaver Visual Composer
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2456bf8a-0a01-0010-709a-ffc91ade9f42
How to Model Portal Content Using SAP Visual Composer No Programming Required!
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff65b5a2-0a01-0010-5b97-e747192a1d49
Troubleshooting VC:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8ee70a47-0a01-0010-d198-f94c2d7d320c
VC e-Learning:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5a35194b-0a01-0010-7598-a4bb10e0c5c9
For installation, u have to download from service market place only.
Check this thread,
Visual Composer 7.0 installation
I hope it will help you in understanding VC and its installation and How to work
Regards,
Rudradev Devulapalli. -
Integration Services 2012 - Parameters and configuration management
Our organization has implemented the project deployment model and it works great! It helps has helped us standardize deployment and configuration management. The big plus for us is the fact that we can now run reports on all SSIS
package configurations. There is one challenge though that we have come across. We haven’t found a good way to reuse the same ssis package while passing different parameters from different jobs and still be able to keep the configured parameter
values for each job documented in SSIDB; if you configure each job to pass different parameter values to the same package, the parameters are actually saved under the the job step’s command. The challenge is that there isn’t a clean way to retrieve
those parameters from msdb, unless someone out there has been able to? We need to retrieve the configured values to be able to build a report on all jobs and packages which contain all configured values. This makes our jobs easier when troubleshooting
a problem.
The only work around we have found is to simply create two different packages, one for each job. I have a problem with not being able to reuse a package from a conceptual stand point. I am sure there is someone out there that has come up with a
good solution. Can you please share it?
thank you,
Juan.If I understand you correctly, you may be able to get what you want from catalog.execution_parameter_values catalog view
http://technet.microsoft.com/en-us/library/ff878152.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Re: BulletinBoard and configuration for Touchpad
Win7 x64
L505-10M
There ware all sorts of problems after a windows security update a few months ago for this system.
I have to put a backup of C:\ back, but various functions did not work .
I have most of them work again now. I installed Flashcard again but Bulletin Board and configuration for Touch pad are missing yet.
Mouse drivers are HID-mouse and PS/2 version: 6.1.7600.16385 of Microsoft.
I downloaded Touch Path Driver-20091202155841.zip but this cannot be installed.
C: \Program Line\TOSHIBA\Bulletin Board is present but probable damaged and not present in Windows Start-menu\Toshiba.
How can I repair this?
arnold12I understand you that recovery installation is your last step and possibility.
What kind of backup do you have? How have you created this backup?
Obviously you have problems with typical Toshiba stuff so I dont understand what kind of backup do you use. Was your preinstalled OS screwed up and you try to install back up.
Anyway, bulletin board try to check Toshiba download page and install ReelTime for your notebook model, if it is offered.
What is wrong with touch pad driver? Why you cannot install it? Can you see some error message?
Have you tried to install both offered touchpad drivers? Which one cannot be installed? -
Accessing "Configuration Model"-classes
hi,
i've created a "Configuration Model" and added some classes to store my data during runtime of a webdynpro-application.
but how can i access these classes? the wizard created the objects as interfaces (even if i hadn't selected the option "Interface" during creation).
how can i achieve to instatiate these classes?
kr, achim
or is there another way for creating Model-classes from self-defined dictionary structures?<i>Still not sure you are following right direction...
</i>
(first, i think it's time to tell you, how i appreciate your extraordinary help
of course i read the docs you've mentioned.
ok, let's put it all together - what i've done so far, what i know and what i want to do:
i'm receiving a table of strings from abap via rfc-model that look like
"HAUCK ACHIM STREET1 MYCITY STREET2 MYCITY "
out of these strings, i have to build objects (javabeans) that i have to deal with within my webdynpro application.
the structure of theses strings, i've defined in the localdirectory:
ZDebtor
String[10] lastname;
String[10] firstname;
List ZAddress;
ZAddress
String[10] Street;
String[10] City;
and NOW....
i need a model for storing the javabeans where i can manipulate them (i don't care <i>how</i> it is created: via xmi-files, manually, configuration model, etc.)
after manipulating the objects, i have to build the abap-table out of strings from the model-to-be-created and put it back to abap.
at the moment, i'm cutting the strings manually in the controller context-nodes that were created with the structure-definitions. but, as i already mentioned, a model should be the better place to put the data used here.
all attempts to create a model failed, so far.
i've got no external uml-modeler and it shouldn't be necessary for these few classes.
i can live with the "manually controller context solution", but i've got that feeling that's it could be done better...
kr, achim -
Product Modelling Environment - Variant Configuration- modelling configura
Hello all,
I have a very important question for which I am trying to find answers. I ahve been researching for the last 2 days continuously
and now I kind of confused.
I need an answer tot his at the earliest possible
And I am struggling to differentiate between PME and product modelling in crm , is it the same?
When Ilook in this link ,it says;
http://help.sap.com/saphelp_crm70/helpdata/en/ed/bfb2ce6a6a46af92172c4ff901f125/frameset.htm
NOTE
This function in the WebClient user interface (UI) replaces the Product Modeling Environment (PME) application, which had to be installed separately.
What does this mean?? does this mean that modelling configurable products is different from PME?
can Product modelling be done in crm as well as ERP?
Could u please let me know
Thank you
BR
RiyaHi Vinod,
Please find below a brief:-
A product model contains the configuration model data relevant for one product which is a server based Architecture.
-A knowledge base is a container for data and can contain many PMEs
-PME is available in Product page
-Need to insert and create a new product model and select the model and enter product related data.
-Create KB's
-Will have to define the characterstics and values and assign to class
-Product model hierarchy shows the model in tree structure.
-After you created the hierarchy with all details you can simulate the configuration as a result titile simulator pops up where you can see the status and Variants and your current selection.
Regds...
Arup
Maybe you are looking for
-
Reg: Not Able to Create EO
Hi all, I have applied a patch 7523554 for JDeveloper. I am using Jdeveloper 10.1.3.3.0 for R12 OAF development. Trying to learn OAF through given Tutorials in the patch. I have completed Hello Word Tutorial Successfully. However facing problem in Se
-
Network confirmation cancell. thru CN29,when past posting period isnot open
Hi Gurus, I have one query regarding netowrk confirmation. In our scnario, we are confirming network activity/element directly through CN27. Now after confirmation, due to some mistake we are trying to cancel that confimration through CN29 but system
-
Are *.MPEG2TS files somthing a software Blu-ray player should recognise?
Purchased Product = WinDVD 9 plus Blu-ray as a retail boxed product from PC World in the UK. Problem = Above product does not appear to support reading Blu-ray files created in Adobe Encore CS3. Adobe Encore CS3 user manual states = Building the fini
-
How to set Max size of InternalFrame should be size of JFrame?
Hi, I added the toolbar on the BorderLayout North, JDesktopPane on the BorderLayout Center and the statusBar on the BorderLayout South. Whenever the toolbar gets clicked,the JInternalFrame is added into the JDesktopPane. I want like, If is click the
-
I've got a multi page form that carries values across multiple pages with the use of Hidden Fields and then on last page inserts the record into a MySQL database (for this I used the built in Insert Record function of dreamweaver). My problem is that