Debug Stored procedure or database trigger by 10g Forms

Hi,
I want to debug my table level trigger (On update for each row), I am updating this table by forms. When I debug this form I am unable to watch the database debug.
Please help me regarding database trigger/function/procedures by debugging forms.

not possible via forms
you can debug it on SQL Developer by using manual INSERT Updates commands

Similar Messages

How to see the output of stored procedure in database express edition 10g

Hi All,
I have done the workout query in database express edition
create or replace procedure emp_ra (did in number) is
commission real;
no_comm exception;
begin
select commission_pct into commission from employees where department_id = did;
if commission is null THEN
raise no_comm;
else
DBMS_output.put_line(commission);
end if;
EXCEPTION
WHEN no_comm THEN
DBMS_OUTPUT.PUT_LINE ('This employee does not receive a commission.');
WHEN OTHERS THEN
NULL;
end;
the procedure compiled successfully with out any error.
After this i executed the below
set serveroutput on
Begin
emp_ra (90);
end;
it says
Statement processed.
0.00 seconds
But i unable to see the result,could anyone please help me on this.
Thanks
Edited by: thelakbe on May 7, 2012 11:17 PM
Edited by: thelakbe on May 7, 2012 11:17 PM
Edited by: thelakbe on May 7, 2012 11:18 PM

i exectued the same procedure in XE Database and have errors:
SQL> create or replace procedure emp_ra (did in number) is
2 commission real;
3 no_comm exception;
4 begin
5 select commission_pct into commission from employees where department_id =
did;
6 if commission is null THEN
7 raise no_comm;
8 else
9 DBMS_output.put_line(commission);
10 end if;
11 EXCEPTION
12 WHEN no_comm THEN
13 DBMS_OUTPUT.PUT_LINE ('This employee does not receive a commission.');
14 WHEN OTHERS THEN
15 NULL;
16 end;
17 /
Advertencia: Procedimiento creado con errores de compilaci¾n.I am not a expert of SQL but i think your variables are wrong and you must initialize
commission real;
no_comm exception;For better information open a new thread at SQL Forum.

Can we call a stored procedure from a Trigger

Hello Everyone,
I need some help in writing the triggers in Oracle 10g Database.
Can we call a stored procedure from a trigger?

Can we call a stored procedure from a trigger? Yes. Why did you think we couldn't?
Cheers, APC

Getting result set from stored procedures in database controls in weblogic

I am calling a stored procedure from database control which actually returns a result set
when i call the stored procedure like
* @jc:sql statement="call PROC4()"
ResultSet sampleProc() throws SQLException;
it gives me exception saying
"weblogic.jws.control.ControlException: Method sampleProc is DML but does not return void or int"
I would appreciate any help
Thanks,
Uma

Thanks for you reply!
1) The stored procedure has head
CREATE OR REPLACE PROCEDURE X_OWNER.DISPLAY_ADDRESS
cv_1 IN OUT SYS_REFCURSOR
AS
err_msg VARCHAR2(100);
BEGIN
--Adaptive Server has expanded all '*' elements in the following statement
OPEN cv_1 FOR
Select ...
commit;
EXCEPTION
WHEN OTHERS THEN
err_msg := SQLERRM;
dbms_output.put_line (err_msg);
ROLLBACK;
END;
If I only run select .. in DBArtisan, it display all 2030,000 rows in 3:44 minutes
2) But when call stored procedure, it will take 80-100 minutes .
3) The stored procedure is translated from sybase using migration tools, it's very simple, in sybase it just
CREATE PROCEDURE X_OWNER.DISPLAY_ADDRESS
AS
BEGIN
select ..
The select part is exact same.
4) The perl code is almost exact same, except the query sql:
sybase verson: my $sql ="exec DISPLAY_ADDRESS";
and no need bind the cursor parameter.
This is batch job, we create a file with all information, and ftp to clients everynight.
Thanks!
Rulin

Debugging stored procedure in SQL Server 2012

Hi,
Please I need your help.
I used to debug stored procedures in SQL server 2008, 2008 R2. I'm debugging the stored procedure using SQL Server management studio. I just create a break point then I click on the debug button
and start debugging without any problems.
I'm talking about my local machine which I have administrator privileges on the machine. My account in the administrators group and I'm assigned in the sysadmin role in SQL server but I couldn't
debug the stored procedure. When I create a break point and try to debug the stored procedure I'm getting a popup screen saying "To continue debugging, the firewall needs to be configured. Configuring the firewall requires privileges."
I tried to figure out the issue but unfortunately until now I'm not able to resolve it.
Thanks.

The problem resolved with help of Microsoft support but it was really strange situation.
First, the following is my environment.
OS is Windows 8 Pro
SQL Server 2012
I did try everything firewall, Anti-Virus and other thing as well. I usually type (local) on the server name TextBox. I did close my Anti-Virus program, turn off windows firewall and run SQL server as administrator but I’m still
unable to debug.
I just do one thing and one thing only, changed the (local) on the server name TextBox to the actual server name and everything work fine. I did try that with everything close/open my Anti-Virus program, turn
off/one windows firewall and still work fine, and I was able to debug any T-SQL in SQL server 2012 but run it as administrator.
Anyway, I’m happy to back on the road again.
Thank you every single one of you who try his best to help.
Cheers.

How to call a stored procedure from a trigger

Hi,
Can anyone please send me sample SQL code to invoke a stored procedure inside a trigger?
Thanks and Regards,
Prince

The user should have execution privilege of that procedure.Correct. The execute privilege needs to granted to the user directly, rather than through a role.
Cheers, APC

How to debug Stored Procedures on Runtime?

Is there any way or any tool available using which I could debug stored procedures on runtime ? Please also pass the links if you know any.

Check out the PL/SQL Developer tool:
http://www.allroundautomations.nl/plsqldev.html
You can download a fully functional version for a 30 day trial. Much less expensive than TOAD, and better yet, it actually works (the TOAD PL/SQL debugger in version 8 is so buggy as to render it useless)

CALLING STORED PROCEDURE IN DATABASE FROM FORMS4.5

Is there any body know how to call stored procedure from Forms 4.5 ?
I am writing a when-button-pressed trigger.
Put the stored procedure name on there. But
it said "stored procedure name is not declared on this scope".
Thanks a lot
null

Try logging in to SQL*Plus and running the procedure, e.g....
SQL> begin
database_procedure_name(update_web);
end;
If it runs OK there, then it should run from within your form (provided that you are logged in as the same user as the test with SQL*Plus.

How to invoke a stored procedure in database adapter

Hi All,
i have created a database adapter which contains a stored procedure, the procedure is merge process,which bring data from another database,
i have made sure that checking for new records and updating any changes from the source database everything has been taken care in the procedure.
my question is how to invoke this process, what all process activities need to be associated with the database adapter, to invoke it
assuming i want to run it every 5 hours,
any reply would be of great help.
Regards
Ananth

Hi,
V thanks for you reply, i am v much new to this bpel environment, i tried using invoke but got errors like
Error(61):
[Error ORABPEL-10107]: Invalid initial activities
[Description]: in line 61 of "C:\jdevstudio10134\jdev\mywork\Incremental_refresh\data_incr_refresh\bpel\data_incr_refresh.bpel", Initial activity is invalid. An initial activity must be of a receive or pick activity..
[Potential fix]: Please re-arrange the BPEL process definition to make sure its initial activity is of a receive or pick activity. (e.g. by adding new receive activity or removing invalid initial activities..
Error:
[Error ORABPEL-10063]: missing initial receive activity
[Description]: in "C:\jdevstudio10134\jdev\mywork\Incremental_refresh\data_incr_refresh\bpel\data_incr_refresh.bpel", there is no receive activity that starts the process.
[Potential fix]: make sure one of "pick" and "receive" activities have attribute "createInstance" set to be "yes".
later i used the service pick, so from pick i am heading to ivoke and later to finally database adapter, but still getting below error
Error(59):
[Error ORABPEL-10900]: xml parser error
[Description]: in line 59 of "file:/C:/jdevstudio10134/jdev/mywork/Incremental_refresh/data_incr_refresh/bpel/data_incr_refresh.bpel", XML parsing failed because file:/C:/jdevstudio10134/jdev/mywork/Incremental_refresh/data_incr_refresh/bpel/data_incr_refresh.bpel<Line 59, Column 19>: XML-24536: (Error) Missing Attribute 'partnerLink'.
[Potential fix]: Fix the invalid XML.
Error(59):
[Error ORABPEL-10900]: xml parser error
[Description]: in line 59 of "file:/C:/jdevstudio10134/jdev/mywork/Incremental_refresh/data_incr_refresh/bpel/data_incr_refresh.bpel", XML parsing failed because file:/C:/jdevstudio10134/jdev/mywork/Incremental_refresh/data_incr_refresh/bpel/data_incr_refresh.bpel<Line 59, Column 19>: XML-24536: (Error) Missing Attribute 'portType'.
[Potential fix]: Fix the invalid XML.
Error(59):
[Error ORABPEL-10900]: xml parser error
[Description]: in line 59 of "file:/C:/jdevstudio10134/jdev/mywork/Incremental_refresh/data_incr_refresh/bpel/data_incr_refresh.bpel", XML parsing failed because file:/C:/jdevstudio10134/jdev/mywork/Incremental_refresh/data_incr_refresh/bpel/data_incr_refresh.bpel<Line 59, Column 19>: XML-24536: (Error) Missing Attribute 'operation'.
[Potential fix]: Fix the invalid XML.

Multiple stored procedure in Database Adapter

Can I manually create the wsdl for database adapter, which can have multiple operations for different stored procedures?
I tried creating a wsdl as -
<definitions
name="CustomAdapter"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/CustomAdapter/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/db/CustomAdapter/"
xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/xsd/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/db/"
>
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/" location="DBAdapterOutboundHeader.wsdl"/>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/xsd/"
schemaLocation="myadapter.xsd" />
</schema>
</types>
<message name="args_in_msg_tscp1">
<part name="InputParameters" element="db:InputParametersTSCP1"/>
</message>
<message name="args_in_msg_sample">
<part name="InputParameters" element="db:InputParametersSAMPLE"/>
</message>
<message name="args_out_msg_sample">
<part name="OutputParameters" element="db:OutputParametersSAMPLE"/>
</message>
<portType name="Proc1_ptt">
<operation name="Proc1">
<input message="tns:args_in_msg_tscp1"/>
</operation>
<operation name="Proc2">
<input message="tns:args_in_msg_sample"/>
<output message="tns:args_out_msg_sample"/>
</operation>
</portType>
<binding name="Proc1_binding" type="tns:Proc1_ptt">
<jca:binding />
<operation name="Proc1">
<jca:operation
InteractionSpec="oracle.tip.adapter.db.DBStoredProcedureInteractionSpec"
SchemaName="SYSTEM"
ProcedureName="TSCP1"
>
</jca:operation>
<input>
<jca:header message="hdr:OutboundHeader_msg" part="outboundHeader"/>
</input>
</operation>
<operation name="Proc2">
<jca:operation
InteractionSpec="oracle.tip.adapter.db.DBStoredProcedureInteractionSpec"
SchemaName="SYSTEM"
ProcedureName="MYSAMPLEPROC"
>
</jca:operation>
<input>
<jca:header message="hdr:OutboundHeader_msg" part="outboundHeader"/>
</input>
<output/>
</operation>
</binding>
<service name="Proc1">
<port name="Proc1_pt" binding="tns:Proc1_binding">

<jca:address location="eis/DB/DBConn25" UIConnectionName="System25"
/>
</port>
</service>
<plt:partnerLinkType name="Proc1_plt" >
<plt:role name="Proc1_role" >
<plt:portType name="tns:Proc1_ptt" />
</plt:role>
</plt:partnerLinkType>
</definitions>
Then I copied this wsdl and corresponding xsd to my BPEL process and created a partnerlink for this wsdl.
I added two invoke activities, one for Proc1 operation and other for Proc2 operation.
When I tried testing this BPEL process, the BPEL process manager was invoking only Proc1 operation for both invoke activities and giving me error as-
<Faulthttp://schemas.oracle.com/bpel/extensionhttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>null:bindingFault</faultcode>
<faultstring>business exception</faultstring>
<faultactor>cx-fault-actor</faultactor>
<detail>
<code>1400</code>
<summary>file:/D:/Morrisons/OracleProducts/product/Oracle_SOA/bpel/domains/TestPOC/tmp/.bpel_MyAdapterTest_1.0_c564165702d743346cadb68bc5bbb594.tmp/CustomAdapter.wsdl [ Proc1_ptt::Proc1(InputParameters) ] - WSIF JCA Execute of operation 'Proc2' failed due to: Error while trying to prepare and execute an API. An error occurred while preparing and executing the SYSTEM.TSCP1 API. Cause: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 [Caused by: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 ] ; nested exception is: ORABPEL-11811 Error while trying to prepare and execute an API. An error occurred while preparing and executing the SYSTEM.TSCP1 API. Cause: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 [Caused by: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 ] Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable. </summary>
<detail> Internal Exception: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 Error Code: 1400</detail>
</detail>
</Fault>
I want to create only one wsdl for all the strored procedures.

Can I manually create the wsdl for database adapter, which can have multiple operations for different stored procedures?
I tried creating a wsdl as -
<definitions
name="CustomAdapter"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/CustomAdapter/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/db/CustomAdapter/"
xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/xsd/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/db/"
>
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/" location="DBAdapterOutboundHeader.wsdl"/>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/xsd/"
schemaLocation="myadapter.xsd" />
</schema>
</types>
<message name="args_in_msg_tscp1">
<part name="InputParameters" element="db:InputParametersTSCP1"/>
</message>
<message name="args_in_msg_sample">
<part name="InputParameters" element="db:InputParametersSAMPLE"/>
</message>
<message name="args_out_msg_sample">
<part name="OutputParameters" element="db:OutputParametersSAMPLE"/>
</message>
<portType name="Proc1_ptt">
<operation name="Proc1">
<input message="tns:args_in_msg_tscp1"/>
</operation>
<operation name="Proc2">
<input message="tns:args_in_msg_sample"/>
<output message="tns:args_out_msg_sample"/>
</operation>
</portType>
<binding name="Proc1_binding" type="tns:Proc1_ptt">
<jca:binding />
<operation name="Proc1">
<jca:operation
InteractionSpec="oracle.tip.adapter.db.DBStoredProcedureInteractionSpec"
SchemaName="SYSTEM"
ProcedureName="TSCP1"
>
</jca:operation>
<input>
<jca:header message="hdr:OutboundHeader_msg" part="outboundHeader"/>
</input>
</operation>
<operation name="Proc2">
<jca:operation
InteractionSpec="oracle.tip.adapter.db.DBStoredProcedureInteractionSpec"
SchemaName="SYSTEM"
ProcedureName="MYSAMPLEPROC"
>
</jca:operation>
<input>
<jca:header message="hdr:OutboundHeader_msg" part="outboundHeader"/>
</input>
<output/>
</operation>
</binding>
<service name="Proc1">
<port name="Proc1_pt" binding="tns:Proc1_binding">

<jca:address location="eis/DB/DBConn25" UIConnectionName="System25"
/>
</port>
</service>
<plt:partnerLinkType name="Proc1_plt" >
<plt:role name="Proc1_role" >
<plt:portType name="tns:Proc1_ptt" />
</plt:role>
</plt:partnerLinkType>
</definitions>
Then I copied this wsdl and corresponding xsd to my BPEL process and created a partnerlink for this wsdl.
I added two invoke activities, one for Proc1 operation and other for Proc2 operation.
When I tried testing this BPEL process, the BPEL process manager was invoking only Proc1 operation for both invoke activities and giving me error as-
<Faulthttp://schemas.oracle.com/bpel/extensionhttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>null:bindingFault</faultcode>
<faultstring>business exception</faultstring>
<faultactor>cx-fault-actor</faultactor>
<detail>
<code>1400</code>
<summary>file:/D:/Morrisons/OracleProducts/product/Oracle_SOA/bpel/domains/TestPOC/tmp/.bpel_MyAdapterTest_1.0_c564165702d743346cadb68bc5bbb594.tmp/CustomAdapter.wsdl [ Proc1_ptt::Proc1(InputParameters) ] - WSIF JCA Execute of operation 'Proc2' failed due to: Error while trying to prepare and execute an API. An error occurred while preparing and executing the SYSTEM.TSCP1 API. Cause: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 [Caused by: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 ] ; nested exception is: ORABPEL-11811 Error while trying to prepare and execute an API. An error occurred while preparing and executing the SYSTEM.TSCP1 API. Cause: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 [Caused by: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 ] Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable. </summary>
<detail> Internal Exception: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 Error Code: 1400</detail>
</detail>
</Fault>
I want to create only one wsdl for all the strored procedures.

Error Stored Procedure Upgrading database from SBO 2007A PL42 to SBO 8.8

Hi,
When executing the SBO 8.8 PL00 upgrade procedure for databases for an "old" database 2007A PL 42, upgrtade stops whith an error concerning a missing stored procedure "_TmSp_CorrectWrongDocLineNumberInOINMForIPF which is not found".
The error details says that it occurs on "Stock Updates" step (just after Checks for Payment) and log file gives the following message here after.
Does anybody have an idea how to upgrade the 2007A database ?
Thanks
Error message in log :
Upgrade Error Technical Failed to call Stored Procedure TmSpCorrectWrongDocLineNumberInOINMForIPF
Edited by: Michel Diepart on Oct 24, 2009 10:55 PM

Hi Paul,
Thanks for your prompt response on a saturday and so late in the evening
Concerning the Stored Procedure, I would like to delete it but ... it doesn't exist and that's the problem...
No such procedure in my database (programmability / Stored procedurefolder in SQL).
When searching on the forum about this stored procedure, no result.
Does this stored procedure have a link with something regarding adjustment in stock ?
"Stock updates" : what table is it in SAP B1 ? If necessary I could save the table, create a sql query to re-create it after delete and try to restart the upgrade procedure but I don't know what is the related table...
I will also try with another 2007A PL 42 database to see if it works.
Do you know if anybody has already try to upgrade a 2007 PL42 dabase to SBO 8.8 ?
Best regards

Can't see stored procedure in database explorer

I'm using mysql 5.0. When I expan the database in database explorer, I can see only tables. Stored procedure folder is shown there but when i try to expand it..nothing inside it.
Anyone knew the solution, Could u please help??!
Thanks in advance.

You'll need to publish the site to your remote server and post a URL here to get any help. It could be you're testing locally and IE browser security is getting in the way. Or it may be due to a missing file on server, etc...
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Stored Procedure : Verify Database message

Hi,
I'm new to Crystal Reports and am using the latest Trial version.
I'm using this against SQL Server stored procedure - which is working fine on SQL Server side. Running it in SQL Server, returns ~9000 rows, using 58 columns, in about 9secs.
When I try to run this in Crystal Reports, grouping, filtering and designing the report with about 10 fields I get the message:
"One or more fields could not be found in the result set. Use Verify Database to update the report."
I've verified the database and everything is up to date.
I've tried only putting individual fields into the report and this is working fine.
I've used the Set Database Location and it's pointing to the right location, but I've tried updating this just in case.
Are there any limits that need to be adjusted within Crystal Reports?
Any help would be appreciated.
Thanks,
Amrit

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
You may have to check for null values.

Stored procedure with database link with "from table(...)"

Hi guys,
I've been told I can't create views on a database by the design team and so have to use this stored procedure to obtain the values.
select HAN_ID, HAN_DS, GLOBAL_IN, LOCAL_IN
from table(cast(ODADMIN.ODP00002_QUERY.Execute001@DBLINK(11312,'EN') as
ODADMIN.ODP00002_001_Array@DBLINK)) WHERE LOCAL_IN = 'Y';I've been told that it works when you remove the database links (so on the actual database) when you remove the cast part. I've tried it with my link and with/without the cast part but it doesn't work. With the example above I get the error: ORA-00907: missing right parenthesis.
When I remove the CAST-AS and the additional parenthesis it brings i get the error: ORA-00904: "ODADMIN"."ODP00002_QUERY"."EXECUTE001": invalid identifier
When I do table( *"* ODADMIN.ODP00002_QUERY.Execute001@MWW_DEV(11312,'EN') *"* )... -- wrapping the call in speech marks I get: ORA-00972: identifier is too long
Anyone see what's wrong? Thanks for any help.
Mike

Hi Ben,
Asking now. By a view I mean one local to the database; I could create one on APEX but then I use the database link twice instead of just 1.
His reasoning Ben:
Firstly, Maintenance. We will have to maintain additional views (at additional code). Secondly, if the view has a JOIN, then you can't update through it (without complexities). If we have to get the View to pass the data to a Procedure (that's a pain). Also, standards..
All update occur via either a Procedure, or a Base view, across over 1000 tables
That's the standard, and doing things differently is costly long term
People will not know how it works, it will have to be explained, maintained..etc.
If the Application has the Business Rules, then updates via Base Views, that's a more standard way of developing. Also, if you update via this view, you'll update multiple rows in one call, which is in-effficient if only ONE row needs to change. Therefore, single row updates from the Application is more efficient
The procedure is as follows:
--SET SERVEROUTPUT ON
DECLARE
nPBusLoc       NUMBER(5):=11312;
sPHanId        VARCHAR2(3):='SB1';
sPLngId        VARCHAR2(2):='EN';
sPDesc         VARCHAR2(30);
sPAllowAlloc   VARCHAR2(1);
sPShowEnq      VARCHAR2(1);
sPAllowDel     VARCHAR2(1);
sPShowScan     VARCHAR2(1);
sPGlobalLocal VARCHAR2(1);
sPReturnCd     VARCHAR2(2);
sPReturnTx     VARCHAR2(100);
BEGIN
ODADMIN.ODP00001.getHandlingCodes
                       (nPBusLoc    -- IN   NUMBER
                      ,sPHanId      -- IN   VARCHAR2
                      ,sPLngId      -- IN   VARCHAR2
                      ,sPDesc       -- OUT VARCHAR2
                      ,sPAllowAlloc -- OUT VARCHAR2
                      ,sPShowEnq    -- OUT VARCHAR2
                      ,sPAllowDel   -- OUT VARCHAR2
                      ,sPShowScan   -- OUT VARCHAR2
                      ,sPGlobalLocal-- OUT VARCHAR2
                      ,sPReturnCd   -- OUT VARCHAR2
                      ,sPReturnTx   -- OUT VARCHAR2
DBMS_OUTPUT.PUT_LINE('nPBusLoc                 = '||nPBusLoc              );
DBMS_OUTPUT.PUT_LINE('sPHanId                  = '||sPHanId               );
DBMS_OUTPUT.PUT_LINE('sPLngId                  = '||sPLngId               );
DBMS_OUTPUT.PUT_LINE('sPDesc                   = '||sPDesc                );
DBMS_OUTPUT.PUT_LINE('sPAllowAlloc             = '||sPAllowAlloc          );
DBMS_OUTPUT.PUT_LINE('sPShowEnq                = '||sPShowEnq             );
DBMS_OUTPUT.PUT_LINE('sPAllowDel               = '||sPAllowDel            );
DBMS_OUTPUT.PUT_LINE('sPShowScan               = '||sPShowScan            );
DBMS_OUTPUT.PUT_LINE('sPGlobalLocal            = '||sPGlobalLocal         );
DBMS_OUTPUT.PUT_LINE('sPReturnCd               = '||sPReturnCd            );
DBMS_OUTPUT.PUT_LINE('sPReturnTx               = '||sPReturnTx            );
END;
/Mike
Edited by: Dird on 27-Aug-2009 01:50

UTL_FILE in a trigger or calling a stored procedure within a trigger

Hello,
We are using Oracle 8i version where I need to either call a SP within a trigger or use UTL_FILE within a trigger.
1. SP runs fine by itself to write to a file but when I try calling SP within a trigger-> I get INVALID Path - is there some kind of restriction with DB triggers and UTL_FILE options
create or replace trigger testtrig
after insert on test_table
for each row when (new.stat_code = '99')
BEGIN
utl_file_test_write;
EXCEPTION
WHEN others THEN
raise_application_error(-20000, sqlerrm);
END;
2. use UTL_FILE with a trigger
create or replace trigger testtrig
after insert on test_table
for each row when (new.stat_code <> '99')
DECLARE
v_line varchar2(32767);
v_location varchar2(80) :='/u01/oraadmin/udump';
v_filename varchar2(80) := 'KC11.txt';
v_handle utl_file.file_type;
BEGIN
dbms_output.put_line('Location is'||v_location);
dbms_output.put_line('Location is'||v_filename);
v_filename := :new.emp_id;
v_handle := utl_file.fopen(v_location, v_filename,'W',32767);
v_line := :new.emp_id;
utl_file.put_line(v_handle,v_line);
utl_file.fclose(v_handle);
EXCEPTION
WHEN TOO_MANY_ROWS THEN
dbms_output.PUT_LINE('Too Many Rows');
WHEN NO_DATA_FOUND THEN
dbms_output.PUT_LINE('No Data Found');
--WHEN utl_file.invalid_path THEN
-- RAISE_APPLICATION_ERROR(-20000, 'utl_file.invalid_path');
WHEN utl_file.invalid_mode THEN
RAISE_APPLICATION_ERROR(-20000, 'utl_file.invalid_mode');
WHEN utl_file.invalid_filehandle THEN
RAISE_APPLICATION_ERROR(-20000, 'utl_file.invalid_filehandle');
WHEN utl_file.invalid_operation THEN
RAISE_APPLICATION_ERROR(-20000, 'utl_file.invalid_operation');
WHEN utl_file.read_error THEN
RAISE_APPLICATION_ERROR(-20001, 'utl_file.read_error');
WHEN utl_file.write_error THEN
RAISE_APPLICATION_ERROR(-20001, 'utl_file.write_error');
WHEN utl_file.internal_error THEN
RAISE_APPLICATION_ERROR(-20001, 'utl_file.internal_error');
End;
I still get INVALID_PATH. What am I missing?
Any help is greatly appreciated.
Thanks.

Hi,
from docs on UTL_FIL.FOPEN:
location:
Directory location of file. This string is a directory object name and is case sensitive. The default is uppercase. Read privileges must be granted on this directory object for the UTL_FILE user to run FOPEN.This, '/u01/oraadmin/udump' does not look like the name of a DIRECTORY object.
Besides, the whole idea of having UTL_FILE commands directly in a trigger body sucks. At the least stay with a stored procedure.
And have you considered what should happen with that file in case the transaction is rolled back?
Regards
Peter

Debug Stored procedure or database trigger by 10g Forms

Similar Messages

Maybe you are looking for