Debugging client proxy

Hi
How to debug the client proxy ?? this particular question is available on forum. But for that everybody replied with procedure for server proxy. All of them suggested the below links which are for server proxy. But atleast this time plz somebody explain me how we do debugging of client proxy ??
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3dfac358-0d01-0010-5598-d4900e81a30c
thanks
kumar

Hi,
1. is it an SAP proxy or customer dev ?
- if customer dev you just need to put a break point in your report
(or FM ) from which you invoke it... that's all
so it doesn't make sense to describe it
- if SAP proxy than you need to find the place
where SAP program calls send_asynchnous method
and put a break point before it and that's all
no special things to do just put a break point and you have client
proxy debugging
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Similar Messages

Missing WS_HEADER protocol in client proxy

Hi!
I generated a client proxy to consume services from 3rd party application, wanted to use standard SAP WS security with user and timestamp, logical port with security profile didn't work, used proxy's header protocol to create my own security header and it worked fine.
Then I generated the new proxy with different set of services from the same application and wanted to do the same thing. To my surprise, there was no header protocol. I debugged the GET_PROTOCOL method and saw that the proxy's attribute table PROTOCOLS does not contain the WS_HEADER protocol (class CL_WSPROTOCOL_WS_HEADER), but instead of it XI_HEADER (CL_WSPROTOCOL_XI_HEADER). I can't use XI protocol (or at least don't know how) - it's completely different and has no SET_REQUEST_HEADER method.
Why in the world would 3rd party application use XI? Can I find this somewhere in WSDL? I have no idea - please give me some hints.
Thanks in advance!
Igor

Hi Igor,
Can you tell me how do you have called your external WebService that uses standard WS Security with user and password, using the proxy's header protocol?
I'm trying to do it but I keep getting the following error: "SoapFaultCode:1 WSDoAllReceiver: Request does not contain required Security header".
Can you give me a example how did I do it?
I've tried also with the logical port's security profile but with no success.
Thanks in advance!
Alexandre

Error in CRM box after executing client proxy

Hi ,
I am executing client proxy program from CRM box.
It is getting the following error in CRM sxmb_moni
I checked the sm59 in CRM box. the RFC connection ( type 3) is configured for XI box (XI1CLNT100_RFC).
In SXMB_ADM of CRM box the correspoinding integration server is 'dest://XI1CLNT100_RFC'.
I am not able to debug this.. any help please..
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">DESTINATION_NOT_FOUND</SAP:Code>
<SAP:P1>XI1CLNT100_RFC</SAP:P1>
<SAP:P2>CR1</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP destination XI1CLNT100_RFC missing (system , transaction SM59)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi Ashok,
> I checked the sm59 in CRM box. the RFC connection ( type 3) is configured for XI box (XI1CLNT100_RFC).
> In SXMB_ADM of CRM box the correspoinding integration server is 'dest://XI1CLNT100_RFC'.
XI adapter uses HTTP connection.So create RFC destination with Connection type H and following parameters
1 Connection Type: H
2 Target Host: System name
3 Service Number: HTTP Port name
4 Path Prefix: /sap/XI/engine/?type=entry
On the Logon/Security tab page, enter the following logon data:
1 User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
2 Password: the password you have specified for this user
3 Client: SAP XI Integration server
4 Language: Language required
and use this HTTP destination in TA - SXMB_ADM configuration.
Cheers,
Jag

How does ABAP client proxy determine the sender business system

When we use ABAP client proxy to send a message in XI-SOAP format to the integration engine, how does the client proxy determine what is the sender business system, i.e. how does it know what value it should insert in the sender service field in the SOAP envelop.
For example, at first, the business system X8A_105 corresponds to the technical system X8A_105, so when the client proxy sends out a message, the sender service is X8A_105. Then I delete the business system X8A_105 in the SLD, and create a new business system that is associated with the technical system X8A_105.when the client proxy sends out a message, the sender_service is still X8A_105, why?

Hi Annie,
Execute the following function module in your business system and see what name it returns..
LCR_GET_OWN_BUSINESS_SYSTEM.
You can always debug the code inside the above FM to find out how it gets the business system name...
I think the issue should be related to cache. I would also suggest you to logoff from your business system and then login again.
Regards,
Sumit
Message was edited by:
Sumit Khetawat

How ABAP Client Proxy works

Hello,
I have one scenario
File Sender Adapter sends file to IDOC Adapter for posting of measurement documents. After posting I need to send back status (success/failure) of measurement documents back to SAP XI.
How can it be done.
Can it be done through ABAP Client Proxy (but how we can trigger report for Abap Proxy for this) . Is there any other solution for it.
regards

Hi Henry
client proxy is used by an application to send messages outside of the system it resides in (normally to the IS in this context).
Client Proxies talks about the implementation of Client Proxy (For the Outbound Interface created during Design time). It also discusses the sending out of Data using Proxies
For more details have alook on these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3dfac358-0d01-0010-5598-d4900e81a30c
To test a connection - /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Client Proxy - /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm

ABAP Proxies:
/people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
ON SDN TV
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=abap%20proxy%20xi&cat=sdn_all&start=11#
Check this document on how to do this (section 3.4):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3dfac358-0d01-0010-5598-d4900e81a30c
Check the blog by Stefan Grube for reference,
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
Thanks !!

Debugging ABAP proxy

Hi all,
Can anyone please tell me how to debug abap proxy.
In my scenario i chnaged the code in proxy.(file to r/3)
I want to debug the code which i have changed..According to me it should be debugged in sm50 (testing client), which i couldnt do?
Any Ideas greatly appreciated..
Regards,
smith

Hi Paul,
Checkout these links..
http://help.sap.com/saphelp_nw2004s/helpdata/en/3b/6f5c3c3806af06e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/81/845f3c31727d59e10000000a114084/frameset.htm
Transaction Code SPROXY
Hope they help you!
cheers,
Prashanth
P.S : Please mark all helpful answers

Client Proxy - asynchronous

HI Guys,
     While doing ABAP report as a client proxy.
CALL METHOD PRXY->EXECUTE_ASYNCHRONOUS
EXPORTING
OUTPUT = FS_EMPLOYEE_MT.
COMMIT WORK
I am getting following error message. I have done XI data structures and activated in SPROXY in ECC. Please reply back ...AM i need to activate any more things on this error.
Error >>>>>>>>>>>>>>>
Method u201CEXECUTED_ASYNCHRONOUSu201D is unknown or PROTECTED or PRIVATE.

HI Guys,
     Now i am working on ECC6.0 & XI 7.0.   SP = 16 using
so i have done like this ...
    create object prxy.
try.
   CALL METHOD prxy->MI_WB_PRXY_SEND            ( instead of asynchronous???????????)
     exporting
        output = xi_data
   catch cx_ai_system_fault.
endtry.
Data is coming while debugging also.and executed. While checking in SXMB_MONI, no messages found in either ECC & XI . So May i know what could be the reason fore that.Thanks ....
waiting for your reply.

Abap client proxy scenario

i am getting an exception in my code(in function i am calling inside my report) while executing my abap report for calling client proxy .
is there any thing by which i can find out where the actual problem is?or any debugging system available or any logging available ?

Hello Rohit,
We faced the similar problem and found a feasible solution to debug.
1. Write a code for an infinite loop in start of your proxy. For ex:
debug = true.
while debug = true.
endwhile.
2. go to sm51 and find your process in all the list of process.
3. select it and from menu, choose debug.
"Reward Point if useful"
Thanks,
Kulwant

Troubleshooting SOAP Call with ABAP Client Proxy

Hello,
we want to make a synchronous call to a web service from ABAP via HTTP / SOAP. The third party system provides a WSDL which we have used to create a client proxy in ABAP.
The request call works fine, but we do not get any SOAP response.
The question now is which monitoring / debugging capabilties are recommended on the SAP system to track down the problem? Which transactions and monitoring functionalities should I use?
Thank you very much for your advise!
Edited by: Florian G. on Jun 6, 2010 2:47 PM

Hi Prasad,
Here is an example of each one... notice the difference between the Username elements in each of the requests:
qualified -
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ver="http://somenamespace">
 <soapenv:Header/>
 <soapenv:Body>
 <ver:GetUserRequest>
 <ver:IdmRequestContext>
 <ver:UserName></ver:UserName>
 </ver:IdmRequestContext>
 </ver:GetUserRequest>
 </soapenv:Body>
</soapenv:Envelope>
unqualified -
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ver="http://somenamespace">
 <soapenv:Header/>
 <soapenv:Body>
 <ver:GetUserRequest>
 <ver:IdmRequestContext>
 <UserName></UserName>
 </ver:IdmRequestContext>
 </ver:GetUserRequest>
 </soapenv:Body>
</soapenv:Envelope>
If you have the option of the WSDL definition changing that attribute to unqualified then it should start working immediately. If that is not an option then your ABAP mapping needs to handle the namespace insertion into the XML. I achieved this in my requirement by using a graphical mapping instead because I imported the WSDL as an external definition and mapped my proxy 1:1 to each element in the external definition.
Regards,
Ryan Crosby

Problem Developing Abap program to use Enterprise Service Client Proxy

Hi I am new to using Webservices but I have successfully created a Client Proxy to consume a web service. In the Abap Development Workbench and have created a Logical Port for it. The proxy works fine when I test it using F8.
However I do not seem to be calling it correctly from my program. When I run the program in debug no exception is generated but the return structure is empty.
The method call does not require any data in the input structure.
The code is as follows :
REPORT zweb_test_wsclient.
DATA: object_ref TYPE REF TO zwebco_bcepsoap,
      input TYPE   zwebget_bceplist_soap_in,
      output TYPE   zwebget_bceplist_soap_out,
      exception TYPE REF TO cx_ai_system_fault.
START-OF-SELECTION.
TRY.
      CREATE OBJECT object_ref.
          EXPORTING LOGICAL_PORT_NAME = 'LP1'.
    CATCH cx_ai_system_fault INTO exception.
ENDTRY.
TRY.
      CALL METHOD object_ref->get_bceplist
        EXPORTING
          input = input
        IMPORTING
          output = output.
    CATCH cx_ai_system_fault INTO exception.
ENDTRY.
END-OF-SELECTION.
Can tell me what I am missing or what steps I can take to identify the problem ?
thanks

Hello Peter,
I have the same problem as You. Do you remember the solution?
A lot of thanks,
jordi

ABAP client proxy create error

Hi,
When I try to create a client proxy web service (se80), I get the error "Error when creating HTTP client: URL: Error:Connection Parameters (Host or Service) Not Availa Message no. SPRX137"
I want to consume a web service (by reading a wsdl from an url) from my own network. the ICM seems to work fine.
Any ideas?
thanks,
Raymond Does

Hi Praveen,
Actualy I am not using XI. I would like to connect to the web service by creating a client proxy and then calling the web service with an ABAP program.
I that case, do I have to do the SPROXY settings as well?
While debugging the creation of the client proxy I saw that the urls to the wsdl and xsd files (my wsdl is refering to them) did not have the complete http://..etc.. text but only the last part (like 'SystemGetInfo.wsdl'). It seems that the client proxy generation program cannot handle this url data.
Please let me know what to do.
Regards,
Raymond

Client proxy code

Hi All,
from where we can find out that data is passed to proxy??
Regards

Gangadhar ,
For Server Proxy :
1. you need to set the external breakpoint in ECC ABAP code .
For client Proxy
1. You can check by setting normal breakpoints and can then on debugging till passing the values to method of Object created by Interface class.
2. Set Parameters for Integration engine of ECC using SXMB_ADM and check there it self at SXMB_MONI of ECC.
Regards ,

SAP XI CLIENT PROXY ERROR

Hi All,
Can u help me out with this:
When I execute my client proxy i get this error
<?xml version="1.0" encoding="utf-8" ?>
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<SYSTEMFAULT href="#o129" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_AI_SYSTEM_FAULT id="o129">
- <CX_ROOT>
<TEXTID>F63AFF63DBE4BB4786A7F52CC4167145</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>96</PROGID>
<CONTID>3447</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_STATIC_CHECK />
- <CX_AI_SYSTEM_FAULT>
<CODECONTEXT />
<CODE>INTERNAL.PROXY_NOT_ALLOWED_ON_IS</CODE>
<ERRORTEXT>Proxy calls are not permitted on sender or receiver side on the IS (client)</ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
</asx:heap>
</asx:abap>
Thanks in advance
Ravijeet

Hi All,
Thanks for ur response, I was able to figure out the error...It was the port in exchange profile...it was mentioned as 50000, which I had to change to 8000.
Now once I execute the proxy in Proxy --> test interface I am getting this success message
<?xml version="1.0" encoding="utf-8" ?>
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<SUCCESS>Services Processed Without Error</SUCCESS>
</asx:values>
</asx:abap>
But my message is not appearing in SXMB_MONI in XI side.
What could be the problem ? Is it any queses I need to register for asynchronous client proxy ?? How do I debug ?

Error in creation of client proxy.

Hello all,
I try to consume a webservice in SAP ABAP. When i create the service consumer proxy it is giving an error message llike
"Incorrect value: Unknown QName http://wholesale...........................sendeWholesaleMeldungRequest"
Have anyone come across this error scenario.
I m using SAP ECC 6.0.
Regards
Sandep.

Hi Sandeep,
--->While creating client Proxy object to consume the webservice a pop will raise with 4 radio buttons options,i think you had selected any one of that depending upon your requirement,rite,If not do that and try.
-->If you have the WSDL file in your local system select the Radio Button WSDL and import it into your Client Proxy.
-->Also create the Logical Port.
Thanks

** Logical Port in Client Proxy

Hi Friends,
I am doing proxy to web service scenario. My proxy is client proxy. After I created proxy, I checked that. There is no standard method 'EXECUTE_ASYNCHRONUS'. I read the Michal's blog /people/michal.krawczyk2/blog/2009/06/20/pixi-abap-proxies-say-goodbye-to-executeasynchronous-method and understand that this method is not created. The reason is that SAP_BASIS support package level is 15. (Release 700) in our R/3 ECC 6.0 system.
Now, I am not able to test my proxy from SPROXY tcode. It asks Logical Port.
1. Can you tell me, what is logical port ? How do I create this in LPCONFIG tcode ?
2. Once this is done, can I call the class with the method like in older version ?
3. Currently I am getting the information 'No vendor specified' while test proxy withe empty logical port.
Expecting your reply.
Kind regards,
Jegathees P.

Hi Rene,
If a logical port is not configured, the X/PI Runtime will be used instead.
In Jegathees' case, this is probably what happened. If you want to route your message through PI then you need to make sure that you are pointing to your Integration Server (i.e. PI), on ECC use transaction code SXMB_ADM --> Integration Engine Configuration. Role of Business System should be "Application System" and "Corresp. Integration Server" should be your PI server.
You will see when you test your client proxy (using TCode SPROXY) you have the option of choosing XI Runtime - or - Logical port too.
Regards, Trevor

Debugging client proxy

Similar Messages

Maybe you are looking for