Debugging MEDRUCK print program

Hi All,
How can I debug SAPFM06P (print program for MEDRUCK) ???
Thanks
Message was edited by:
sapsudha rao

Hi Sudheer,
I've tried what you said...but while saving PO changes or while generating print view ..... control is not stopping at break-point... do I need to make any further settings???
Thanks in advance..

Similar Messages

Debug PO print program

Hi friends.
I am trying to debug PO print program, even after putting an endless loop.. it's not going to debug mode. Please help
Thanks
Lakhbir

Lakhbir,
There are several ways to keep breakpoints.
1. Get the Layout name. Go in SE71, give layout/form name and enter in display mode. Use menu path Form Check --> Texts. It will display all associated driver programs. If you know your driver program name, place a breakpoint from SE38. Usually there should be a FORM ENTRY routine call.
2. Go to program RSNAST00 -search for
    PERFORM (TNAPR-RONAM) IN PROGRAM (TNAPR-PGNAM) USING RETURNCODE
                                                         US_SCREEN
                                                         IF FOUND.
PGNAM is program name, RONAM is Name of routine to be called up in the processing program.
Keep a break point. When you print from ME23N, control will come to this place in debugging mode.
Check form name, program name. Go to program and associated form and keep breakpoint.
Hope this will help you.

Medruck print program

hi all,
in table tnapr the print program name of form medruck is given
sapfm06p but in table ttxfp it is saplmedruck. why so?
regards
pankaj

Hi Pankaj,
table ttxfp provides PRINT_NAME:Program/transaction in SQL trace analys is saplmedruck
and TNAPR provides actual Program name
PGNAM :"Program name i.e. sapfm06p
so the names are different.

Medruck print program customizing

Hi,
I have a requirement from client.
In purchase order form is MEDRUCK presently is not displaying material conditions if any existing, my requirement is if any conditions existing to material in purchase order should display in script.
in print program or form where i have to change and what changes i have to do
it is very urgent plz. any body give sol.
Ganesh

hi ganesh,
u saythat ur looking at write_form, thre is no logic in that i think u should first find where the material conditions exists and look at the form whreethese conditions are printed and make modifications aremade.
remember ur manipulations are done at form level and not at program level.
ur program is to hold all thedeclarations and control of nast and protocol updates only.
hope u understand this.

Print program debugging

Hi all,
I've copied standard MEDRUCK (form ) & SAPFM06P (print program) to ZMEDRUCK & ZSAPFM06P and I've made changes to settings in NACE as well.
If I made any changes in ZMEDRUCK , I'm getting changed output.. everything is fine
Finally my problem is how can I debug print program.. some body (SDN forms ) suggested me to set break points in include ZM06PF02 ..but control is not at all stopping..
Could any one suggest me how can I debug print program..please!!!!!

hi
good
SCRIPT
There are 2 separate kinds of debugging available when you try to debug scripts.
1. Debugging the print program : This is the normal debugging we do for our report programs.
2. Debugging the script itself : You Can debug a SAP Script by activating debugger in two ways:
a .In SE71->Menu->Utilities->Activate Debugger, then debugger will be get activated and when your print program is executing Script Debugger will be in active and you can proceed with your debugging.
b. Goto se38-> RSTXDBUG ->Execute this same as going thru in se71-> Menu, now debugger will be activated.
refer to the link below
http://www.howforge.com/how-to-debugging-sapscript-form
reward point if helpful.
thanks
mrutyun^

Debug print program

Hi,
I have created a output type for the packing list inside vl02n i.e.
vl02n->pack->Extra->Output. Then, i also tried to debug my print program by placing a break point in it. But, the system did not stop in the breakpoint during the execution. Is there any alternative to debug it??
Regards,
Kit

Hi
Keep a Break point in the driver program and debug it.
It's similar to the debugging of a ordinary report.
Keep some break points in the program code and execute the SF output using MB02 then it will stop at the break point.
SCRIPT
There are 2 separate kinds of debugging available when you try to debug scripts.
1. Debugging the print program : This is the normal debugging we do for our report programs.
2. Debugging the script itself : You Can debug a SAP Script by activating debugger in two ways:
a .In SE71->Menu->Utilities->Activate Debugger, then debugger will be get activated and when your print program is executing Script Debugger will be in active and you can proceed with your debugging.
b. Goto se38-> RSTXDBUG ->Execute this same as going thru in se71-> Menu, now debugger will be activated.
refer to the link below
http://www.howforge.com/how-to-debugging-sapscript-form

Finding Program for triggering Print Program (MIGO - Goods Receipt)

Hi all,
Currently, I have developed customized print program and SMARTFORMS for Goods Receipt via MIGO, with output type ZZGR.
Typically, this is a inter-plant transfer, where Plant A will issue a Delivery Order to Plant B, and Plant B will post goods receipt via MIGO (Movement Type 101), using Delivery Order number. As soon as the Material Document is posted, the SMARTFORMS shall be triggered by customized print program, in order to print out the goods receipt document upon material doc posted.
The config for output determination (via TCODE NACE) for goods receipt is configured. I have tested post a goods receipt using Delivery Order, and Material Document is posted successfully. However, I got a message from SAP Inbox (Businees Area), saying that my Material Document having an update error, and the root cause is specifically from calling Function Module to trigger Smartforms in the print program. From tcode ST22, I realized that the error is due to empty parameter being passed to the function module (where the parameter is required field for further processing in Smartform).
In order to rectify why empty parameter is bieng passed, I will have to debug the print program, after GR posted from MIGO. Therefore, can someone shed some lights on how to perform a debugging process, or any standard sap program involved, as I understand that the print program is triggered (in background) after GR posted?
Also, can I know why the Material Document will not be committed to MKPF table after GR posted, is it due to the update error from the above mentioned?
Many thanks.
Best regards,
Patrick
P/S: I'm using SAP ECC6.

Actually, this print program is being triggered in the update processing.
Put a breakpoint in your driver program.
In MIGO, before pressing the SAVE button start debugging.
Press the SAVE button.
Start the update debugging by Settings > Update Debugging.
As soon as you continue in debugging, it would open another debugging session for the Update debugging. You can press continue and it would stop at your breakpoint.
Regards,
Naimesh Patel

Picking output not hitting breakpoint in print program

Hi Guys,
I have an o/p type ZK00, I need to debug the print program and the script for it. I have placed a breakpoint in the print program at the designated routine in TNAPR (Entry). Now when I try to save the delivery I expect it to hit the code but it isnt. It creates another line in the Extras --> Picking o/p and created a spool as well! Wonder how is it doing that when its not going through the program or the script.
Breakpoints on the form and the driver are in the same client.
Thanks for reading
Regards
Sameer

You need to activate the Update Debugging in order to stop it to your break point.
Before saving Delivery, start debugging and Settings > Update Debugging.
Regards,
Naimesh Patel

How to debug BDC , Dialog program and Script

Hi all,
Please let me know, how to debug BDC , Dialog program and Script
Thanks&Regards
Devi

SCRIPT DEBUGGING
When we want to debug the SAPSCRIPT, we need to first activate the debugger, we have 2 ways to activate the Debugger.
1) Execute the program RSTXDBUG
2) Go to SE71, from the initial screen enter the form name and press Utilities --> Activate Debugger
When we are in the Debug screen,
3.1) F5 will be debug filed by field, that means if a single line is having 5 fields, if we press the F5 this will do field by field,
3.2) F6 will be line by line, that means when we press the F6, it will debug the line and it will go to the next line. F7 also do the same way
3.3) F8 will be very useful when we have any include statement in the SCRIPT, if any include is there and we press the F5 or F6 then this will go that Include (normally SO10 or any transaction text), then if we want line by line debugging then we can press the F5 or F6, or if you want to execute that in a single shot then press the F8, then the debugger will be executed that include and come back to the Script debugging.
Some times in the script, we may right lengthy lines, if we want to debug that whole line, we have an option called Left/Right, this we will find the Debug screen of the script, there is a Push button, we can make use this button to debug.
We can put the breakpoints in the SCRIPT DEBUGGER also, just press the BREAKPOINT Pushbutton from the debugging screen or press EDIT --> Breakpoint
If we want to debug the print program from the SCRIPT DEBUGGER, just press SHIFT+F7 or EDIT --> ABAP Debugging
If we want to see the Windows which are defined in the forms, just press the Go to --> Form --> Windows .if we want to see the pages go to --> Form --> pages. Here we have an option to see the page wise window also go to --> Form --> page Windows
If we want to see the paragraphs which are defined in that script, press go to --> Styles --> paragraphs.
If we want to see the Character formats which are defined in that script, press go to --> Styles --> Character Strings.
If we want to see the Page formats which are defined in that script, press go to --> OTF --> Page.
If we want to see the Elements which are used in the Script, then press go to --> Text Elements --> Form Elements.
If we want to see the commands which are used in the script, press go to --> Commands --> List
Finally, if we want to exit from the SCRIPT DEBUGING, simply press Debugger --> Exit
DEBUG BDC
ust go into debugging mode and do the BDC step by step, when it comes to the Call Transaction line, check the mode which will be 'N'....Now, overwrite this with 'A' and execute the BDC...It will run in All Screens Mode....
As suggested above the MODE 'A' will do the trick as it takes you to all screens.
Normally MODE N will be defaulted as it will be used for background processing,
Here is a simple tip,
This will be the call transaction part of the program,
CALL TRANSACTION 'IW32' USING BDCDATA MODE 'N'
MESSAGES INTO MESSTAB.
I would suggest you to make it like this,
DATA: V_MODE TYPE C VALUE 'N'.
*<In debug mode set V_MODE = 'A' for debugging>
CALL TRANSACTION 'IW32' USING BDCDATA MODE V_MODE
MESSAGES INTO MESSTAB.
This will be very useful because you just need to change the value of the V_MODE at runtime as A for debugging besides it has N which is the default to be used. (i.e. you need not change the code again and again).
This will be very useful when you have to debug some program in QA or PRD servers.
regards,
srinivas
*reward for useful answers*

Wats d in-built print PROGRAM name for layout MEDRUCK???

wats d in-built print PROGRAM name for layout MEDRUCK??? and can we change it??
wat shud we do if we want2 change it??
i mean...assume we got a scenario in which we need ta use MEDRUCK layout n print progrm n change some text in it.. and d address and header in it..
how cud we do dis??

Hi ,
The print program name for 'MEDRUCK' is SAPFM06P, it is not advisable to change the print program instead if you want to do any changes use Subroutines in the layout. Eg : PERFORM <Subroutine name> in PROGRAM <pname> USING <in_variables>
CHANGING <out_var>
ENDPERFORM.
Srini

Is medruck form available in smartform including print program

Can any one tell me a standard form name & print program name in smartforms for medruck in sap scripts.

Hi
For Purchase Order
PUCHASE ORDER
Output type         : NEU
ScriptForm Name     : MEDRUCK
Driver Program Name : SAPMF06P
smartform name      : /SMB40/MMPO_L
copy the std form or smartform and use it after attaching the same in NACE tcode
Reward points if useful
Regards
Anji

How to get the PO no in the smart form and in the print program from ME23N

hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.

Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa

Error when exexuting a smart form from print program

Hi,
I have created a Print Program & Layout Set [Smart Form].
Now when i executed Print program it is throwing following error.
As internal table that we are passing to F.M is not having any data i have appended some data in debug mode.
After htting Print Immediaely Button Following EXIT Error is coming.
No table is currently processed, switching lines is not possible.
Message no. SSFCOMPOSER 183
Diagnosis
You tried to switch to the next table line, but currently no table is open for output.
System Response
The system issues an error message.
Procedure
This is probably an internal error. Please contact the SAP hotline and report the problem.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.

Make sure that you have proper definations of internal table in program and smartform.
Regards,
Amey

Problems with Print Program of Production Order (CO03) !!

Hi all,
I have a question about Print program of Production Order. I created a new Order in CO01. Then, in CO03, I call Print Program ( menu Functions >> Print). At the first time, it printed a so-called original version. Later, when i printed it again, it informed me that just was a copy. Now, that's ok.
I made some modification of Print Program by copying and changing the code (let's call it Z_PSFCOBJL) and SAPScript form. However, When I call Print function in CO03 for that Order, it didn't show any changes which I made. What's wrong? I checked in the code by debug mode, the variable that I transfered to the form was correct with its value.
I think that because SAP just make a print copy so that it will not reflect any changes that I made to the program, right? Is there any way to overcome this because I don't want to create new Orders just for testing every modification?
Thank you in advance.

Hi MURUGESAN THANGATHURAI ,
Yes, I did assign the new program and new form for this before printing. But I wanna know if there is any way that allows me to view those changes I made?
When I change the code in Print Program, print-out includes this update (although it still informs me that is a copy version). But when I make changes in the SAPScript form (for example, adding a variable for display), it will not update this?
What's problem?
Thank you guys.

Print program for PO

Hi..
I'm trying to find the print program for MEDRUCK(Purchase Order). In NACE I found a program called 'SAPFM06P' for print output medium.. But it is a subroutine pool.. How to execute this program?
Regards,
Nithy

Yes, the printing program is called by the form
ENTRY_NEU in 'SAPFM06P'

Debugging MEDRUCK print program

Similar Messages

Maybe you are looking for