Decimal in sapscript

i have value 182000
i want to get 18.2
what the comma
&num(t2.1)& dont work

Hi liat,
1. just give

&NUM(.2)&
regards,
amit m.

Similar Messages

Using a variable to set decimal place in SAPScript

Hi Freinds,
is it possible to use variable as decimal indicator anf if yes please how.
&symbol(E.2)& = two decimal
my intension:
&symbol(E.2)& = to replace 2 with variable e. g. &QAMV-STELLEN&
Thanks,
Blacky

Hi Uma,
For Example
If the output of &EDIDC-DOCNUM& = 50000.231
Then:
&EDIDC-DOCNUM(.2)& = 50000.23
Now my intension:
&EDIDC-DOCNUM(.<variable>)& where <variable> = 2
&EDIDC-DOCNUM(.<variable>)& = 50000.23

Box in Long text of sapscript

Hi All,
I have created a script.....in that i have to print only long text in the main window.
Now my problem is...the LONG text is breaking and going to next page...
means a part on 1 page and remaining on subsequent pages..
And the problem is the box which i have put arround the main window is coming only in first page and last page . In between pages the box arround the main window is not coming .
How to get the box around those pages also.
help me out...
Thanks,
Guru

Hi
The property of MAIN window is like that, If the Data is more than a Page it automatically goes to next pages.
So better decide where I mean in which you wants to print ? In MAin window , then it automatcially goes to other pages. use a new paragraph format and mention PAGE PROTECTION for that such that it prints in the Same page.
For the boxes see the seetings of the main window in all pages, especially in NEXT page.. so that the box is coming properly
see the box related commands
SAPScripts
POSITION WINDOW
SIZE WIDTH '160' MM HEIGHT '140' MM
BOX FRAME 10 TW
Box
BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35
linessssssss
BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
Reward points for useful Answers
Regards
Anji

Dynamic BOX in sapscript

Hi,
I am using the BOX control command in SapScript.
Is it possible to assign the values of Xpos and Ypos
dynamicalliy.
In BOX XPOS 16 CH WIDTH 0 MM HEIGHT 18 MM FRAME 10 TW,
i want to assign the values at runtime, instead of
xpos 16 , something like Xpos Var, where var contain the value of xposition.
or any other method to print dynamic box in sap script

Hi
yes it is possible
see this
SAPScripts
POSITION WINDOW
SIZE WIDTH '160' MM HEIGHT '140' MM
BOX FRAME 10 TW
Box
BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35
linessssssss
BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
Reward points for useful Answers
Regards
Anji

Box and Size stmt in sapscript

Hi all
a very basic question
can anybody plz tell me whatz the difference between box and size stmt in sapscript
Thanks in advance

hi,
Check this Out.....
BOX, POSITION, SIZE: Boxes, lines, shading
The BOX, POSITION and SIZE commands are for drawing boxes, lines and shadows. These commands can be used to specify that within any particular layout set, window or passage of window text can be output in a frame or with shadowing.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet PCL-5 driver HPLJ4, the
Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when creating output. Line printers and non-supported page-oriented printers ignore these commands. The resulting output may be viewed in the SAPscript print previewer.
Syntax:
1. /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
2. /: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
3. /: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each parameter (XPOS, YPOS, WIDTH, HEIGHT and FRAME), both a measurement and a unit of measure must be specified. The INTENSITY parameter should be entered as a percentage between 0 and 100.
XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH: Width of the box.
Default: WIDTH value of the SIZE command.
HEIGHT: Height of the box.
Default: HEIGHT value of the SIZE command.
FRAME: Thickness of frame.
Default: 0 (no frame).
INTENSITY: Grayscale of box contents as %.
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP/4 numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measure: The following units of measure may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
Examples:
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION
Syntax:
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words as a value which specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN: Origin of the coordinate system.
WINDOW: Sets the values for the left and upper edges to be the same of those of the current window (default setting).
PAGE: Sets the values for the left and upper edges to be the same as those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
Examples:
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE
Syntax:
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT: Dimensions of the rectangle or line.
WINDOW: Sets the values for the width and height to the values of the current window (default setting).
PAGE: Sets the values for the width and height to the values of the current output page.
Examples:
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
Regards,
Santosh

Draw tables in sapscript

How to draw the tables in sapscript?
Is there any other way then draw box for vetical and horizontal line.

Hi
See this and draw the boxes in Script
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
POSITION WINDOW
SIZE WIDTH '160' MM HEIGHT '140' MM
BOX FRAME 10 TW
Box
BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35
linessssssss
BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
Reward points if useful
Regards
Anji

Decimal values not showing in PO output

In PO qty is created with decimal values ( 30.500 M)
when print the output it is coming as 31 m ( values is getting rounded off)
PO is created with ref to sales order , where as qty is EA
in SO . ( Qty EA is not affecting PO / PR)
Please advise on the PO configuration part to get the PO output with decimal values.
Thanks & regards
Ray

if PO has the correct quantity with decimal places, then check the sapscript form.
Muralidhar

How to Draw table in SAPscript ???

Hi all Guru of SAPScript!
I want to draw a table with column and row in SAPscript. Who can help me step by step?
Thanks!
Edited by: kathy a on May 6, 2008 11:53 AM

Hi,
Use BOx Syantax How to Draw table in SAPscript ??? Pls Read the description
Syntax:
1. /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
2. /: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
3. /: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each parameter (XPOS, YPOS, WIDTH, HEIGHT and FRAME), both a measurement and a unit of measure must be specified. The INTENSITY parameter should be entered as a percentage between 0 and 100.
XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH: Width of the box.
Default: WIDTH value of the SIZE command.
HEIGHT: Height of the box.
Default: HEIGHT value of the SIZE command.
FRAME: Thickness of frame.
Default: 0 (no frame).
INTENSITY: Grayscale of box contents as %.
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP/4 numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measure: The following units of measure may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
Examples:
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION
Syntax:
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words as a value which specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN: Origin of the coordinate system.
WINDOW: Sets the values for the left and upper edges to be the same of those of the current window (default setting).
PAGE: Sets the values for the left and upper edges to be the same as those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
Examples:
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE
Syntax:
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT: Dimensions of the rectangle or line.
WINDOW: Sets the values for the width and height to the values of the current window (default setting).
PAGE: Sets the values for the width and height to the values of the current output page.
Examples:
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
Reward Helpfull Answers
Regards
Fareedas

How to enforce position after decimal point

Hi,
i need to enforce a position after the decimal point in an SAPScript Form.
The Form is MEDRUCK_RV and the field ist RM06P-PRMG1.
I tried to enforce it with RM06P-PRMG1(Z9.1) but it doesn't work.
I need to cut the left-hand zeros and display one position after the decimal point.
Can someone help?

Hi,
Try this.
DATA : DFORMAT TYPE XUDCPFM,
L TYPE I.
SHIFT RM06P-PRMG1 LEFT DELETING LEADING '0'.
SELECT SINGLE DCPFM FROM USR01
INTO DFORMAT WHERE BNAME = SY-UNAME.
IF SY-SUBRC EQ 0.
IF DFORMAT EQ 'X'.
SEARCH RM06P-PRMG1 FOR '...'.
ELSE.
SEARCH RM06P-PRMG1 FOR ','.
ENDIF.
ENDIF.
IF SY-FDPOS NE 0.
L = SY-FDPOS + 2.
RM06P-PRMG1 = RM06P-PRMG1+0(L).
ENDIF.
Thank You,
Saritha

SAPScript output doesn't match the variable's value

Hello Expert,
In my script, I defined as below:
/: IF &VBDKR-VKORG& = 'WCAO'
= ,,&KOMVD-KAWRT(I11.4<)&,,&KOMVD-AWEIN&
/: ENDIF
Then I run the report which will trigger the script. In the debug mode, I find the values are as below
VBDKR-VKORG: WCAO
KOMVD-KAWRT: 97.74
KOMVD-AWEIN: STN
In my expection, the output should be 97.7400 STN, but actuall the output displays 9.7740 STN. It's off by one decimal point conversion. This is quite confusing.
CAn any expert help on this and tell how to fix the issue?
Thanks in advacne,
Regards, Yongbo
Moderator message: please choose more descriptive subject lines for your posts.
Edited by: Thomas Zloch on Jul 8, 2011 9:38 AM
Edited by: Yongbo Wu on Jul 8, 2011 10:31 AM

Hello,
SAPSCRIPT isn`t able to interpret more than 2 decimal places.
I have the problem also and uses a workaround.
I have defined a text attribute in my print program, where I move the value and print the value as text
Regards,
Christian

Amount in words in F110 (sapscript -indian format)

Hi Experts.
I have changed the F110_PRENUM_CHCK to Z110_PRENUM_CHCK .
I want the amount to be in word in indian format.
say Ten Lakh ninty thousand and fifty
But i am getting the output in "One millon .. " format
Pls give me the coding and also suggest me how to incorporate in sapscript .
Window CHECKSPL
545
Amount in words -
&'*** 'SPELL-WORD& &' and 'SPELL-DECWORD&***
Example for amount and decimal places in words
&'*** 'SPELL-WORD& &REGUD-WAERS&&' and 'SPELL-DECWORD' Cents'& ***
Example for numbers in words
&SPELL-DIG06(6)&&SPELL-DIG05(6)&&SPELL-DIG04(6)&&SPELL-DIG03(6)&&SPELL-DIG02(6)&&SPELL-DIG01(7)&
Pls revert back its urgent
Thanks
Pravesh Deshbhratar

same code i used in smartform:
DATA : l_spell_a TYPE pc207-betrg,
l_local   TYPE string,
w_len     TYPE i.
* Internal Table Declaration
DATA : BEGIN OF t_char OCCURS 0,
char(80) TYPE c,
END OF t_char.
l_spell_a = l_amtsum.
CALL FUNCTION 'HR_IN_CHG_INR_WRDS'
EXPORTING
amt_in_num         = l_spell_a
IMPORTING
amt_in_words       = l_spell
EXCEPTIONS
data_type_mismatch = 1
OTHERS             = 2.
IF sy-subrc = 0.

Columns in SApScripts

Hi All,
Please tell me how can i put columns & rows in SAPScripts?
Is there any way where i can hide the columns wherever they are not needed?
Please answer my question asap.
Thanks & Regards,
Bhavika

Hi
By drawing the peoper boxes you can put the rows and Colum,ns in a table like structure
see the commands for drawing them
SAPScripts
POSITION WINDOW
SIZE WIDTH '160' MM HEIGHT '140' MM
BOX FRAME 10 TW
Box
BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35
linessssssss
BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
Regards
Anji

SAPSCRIPTS - BOX COMMAND.

Hi ,
I hava script in which i am supposed to print an internal table.
now. the script is designed in such a way that on first page the main window starts at line 17 of the page and on second page the main window starts at line no 7.
i ma printing my internal table in the main window. i am ussing box command to get a tabular look n feel . on first page the y pos of the box is set to 18 LN. n its gettin printed properly.
till first 15 records the data gets printed on first page but if the records in the internal table are more than 15 then then the output continues to second screen.
now while setting the ypos how should set the value? how exatly i am supposed to count the value to set for the y pos? when we say BOX ypos 7 LN dose it mean set ypos at line 7 from upword direction? n line of the window or line 7 of the page?

Hi
See this and use accordingly
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
POSITION WINDOW
SIZE WIDTH '160' MM HEIGHT '140' MM
BOX FRAME 10 TW
Box
BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35
linessssssss
BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
<REMOVED BY MODERATOR>
Regards
Anji
Edited by: Alvaro Tejada Galindo on Jul 8, 2008 10:59 AM

Remove decimals when equal to 0 SAPSCRIPT

Hello all,
When printing a quantity field in a sapscript form, I would like to remove the decimals if they are all 0, but retain them if at least one is non zero. For example:
Quantity    -   Value to print
1000.000   - 1000
1000.020   - 1000.020
1000.200   - 1000.200
1000.002   - 1000.002
I have tried many different things including formatting options C and Z (i.e. kwmeng(C)) but neither provide the correct result. Also, kwmeng(.3) will not work because sometimes I want kwmeng(.0). I want to avoid ABAP code in the print program and I know that it is possible because a different form in our system performs exactly this way without parsing the value into mantissa and decimal (though I cannot determine how).
Please post any thoughts or ideas. Thanks!

Hi,
I think that if the quantity field is linked in the DDic structure/table to a unit of measure field, which content at runtime refers to a unit with 0 decimals, then it should work exactly as you expect.
Sandra

How to cut the zeros after the decimal point ?

Hello everybody,
does anyone know a solution how to cut the zeros after the decimal point at at CHAR data field?
For example the field
&RM06P-PRMG1&
This is a char field in the database, so that the command
&RM06P-PRMG1(.0C)&
doesn't work.
At the moment the output on the form is like that
124,000
It shoud be like that
124
It would be great if anyone could help me!
TIA!
Strobbel

Hi Strobbel,
If you are working on standard sapscript, first make a zcopy of it, do the modifications in that and assign the new form to the output types in tcode NACE.
First you need to create a program to write the logic, so go to tcode SE38 , create a new program (say zremove_zero) with Program type Executable.
Now you will see ABAP Editor with statement;
Report zremove_zero.
Add the following lines below the report statement.
*& Form remove_zero
* text
* <--lv_AMT text
FORM remove_zero CHANGING lv_amt.
DATA p_amt TYPE p.
MOVE lv_amt TO p_amt.
MOVE p_amt TO lv_amt.
Condense lv_amt.
ENDFORM.
Now save and activate the program.
Now open the zcopy of your script and Just above the statement &RM06P-PRMG1& write the following lines;
/: perform remove_zero in program zremove_zero
/: changing &RM06P-PRMG1&
/: endperform.
Now you can see your amount printing without decimals.
Try and let me know, hope i have guided you clearly.
Regards
Karthik D
P.S.: I advice you to take help from an ABAPER.

Decimal in sapscript

Similar Messages

Maybe you are looking for