Declare func on Query Generator

Hi,
I am Using SAP B1 for hana ver 9.0 PL10
I have a difficulty to use Declare function as variable reference in Query Generator, Any tips for this matter ?
Thanks

You can do this using the SAP Business One Query Manager. The code below calls a stored procedure with one parameter of the DateTime type, which the user is prompted to enter:
      declare @tmp as nvarchar(100)
      select @tmp = T0.Name from [@ADV] T0
      WHERE T0.U_Date = '[%0]'
      EXEC myReport '[%0]'
The table @ADV is used just to let SBO know that the actual type of the [%0] parameter is Date.

Similar Messages

Declarations in SAP QUERY generated ABAP Programs

hi,
i had created a ABAP Program through ABAP Query (SQ01,SQ02,SQ03) but i have a issue that when i transport it to the PRD server i got the run time error. The Z program which i had created is the copy of the SQ01 generated program and i had done all the includes declarations in this program. but there is a problem that it is consist of the declarations of the structures,quries .
I want to know is it necessary to always transport the Infoset and user group and the structure which is present in the program generated .
Please provide me guidelines for this problem .
Edited by: ricx .s on Jul 6, 2009 5:31 AM
Edited by: ricx .s on Jul 6, 2009 8:07 AM

hi,
i had copied the program bcoz i want to chekc that it is really necessary to transport the user group and infoset so that it can achieve functionality similar to the SAP QUERY.
is there any other way without whichi can ahieve the functionality of SAP QUERY generated program and take it into the ABAP Porgram?

How to do this in Query Generator?

Dear Experts,
Please check my following query I've written in Query Generator.
/* select from dbo.OCRD t0 */
declare @BP nvarchar(20)
set @BP=/* t0.CardName */ '[%0]'
declare @Dt1 datetime
declare @Dt2 datetime
set @Dt1=/* Start Date */ [%1]
set Dt2=[%2]
select distinct t1.po, Max(t1.supplier) Supplier,Max(t1.process) Process, Max(t1.OrderNo) OrderNo,Max(t1.Date) Date,
isnull((select sum(t2.Quantity) from dbo.ir t2 where t2.po=t1.po and t2.TType<0),0) Issued,
isnull((select sum(t3.Quantity) from dbo.ir t3 where t3.po=t1.po and t3.TType>0),0) Received,
isnull((select sum(t2.Quantity) from dbo.ir t2 where t2.po=t1.po and t2.TType<0),0)-isnull((select sum(t3.Quantity) from dbo.ir t3 where t3.po=t1.po and t3.TType>0),0) Balance
from dbo.ir t1 where t1.Supplier=@BP and (t1.Date>=@Dt1 and t1.Date<=@Dt2) group by t1.po
The Query works well. But for the the lines
set @Dt1=/* Start Date */ [%1]
set Dt2=[%2]
it displays BP Code as the prompt next the text boxes meant for inputting dates. I would like to display 'Start Date' and 'End Date' respectively for Dt1 and Dt2.
Please explain me how to go about it.
Thanks in advance.
Regards
Anand

declare @Dt1 datetime
set @Dt1=/* Start Date */ [%0]
declare @Dt2 datetime
set @Dt2=/* End Date */ [%1]
/* select from dbo.OCRD t0 */
declare @BP nvarchar(20)
set @BP=/* t0.CardName */ '[%2]'
I've changed. When I run the query the input box does not appear, the query shows only a blank table.
Thanks
Anand

Error in Query generator

Dear all,
I face an issue in Query generator.
When i execute the query in query generator, the error is like this
1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
'Service Contracts' (OCTR)
My query is like this
Declare @StartYear as char(4)
Declare @EndYear as char(4)
Declare @Dept as char(3)
Declare @UnitBusiness as char(3)
Begin
set @StartYear = (Select   YEAR(T0.[RefDate]) from JDT1 T0 where T0.[RefDate] = [%0] )
set @EndYear = (Select YEAR(T1.[RefDate]) from JDT1 T1 where T1.[RefDate] = [%1])
set @Dept = (Select T2.[Name] from OASC T2 where T2.[Name] = [%2])
set @UnitBusiness = (Select   distinct SUBSTRING(T3.[Segment_0],10,2) from OACT T3 where ( T3.[Segment_0] = [%3] OR ( 1 = (CASE WHEN [%3] = 'All' THEN 1 ELSE 2 END) ) ))
Exec NEC_RPT_FinanceReport @StartYear,@EndYear,@Dept,@UnitBusiness
End
The problem is i can not show the input screen after i execute the query generator.
If i remove the the Variable @Dept and replace with the value it runs well.
Does any one know where is the problem ?
Thanks in advance
Regards
Bodhi86

HI Neetu, i have change the query without using store procedure
my query is like this
Declare @StartYear as char(4)
Declare @EndYear as char(4)
Declare @Dept as char(3)
Declare @UnitBusiness as char(3)
Begin
set @StartYear = (Select   YEAR(T0.[RefDate]) from JDT1 T0 where T0.[RefDate] = [%0] )
set @EndYear = (Select YEAR(T1.[RefDate]) from JDT1 T1 where T1.[RefDate] = [%1])
set @Dept = (Select T2.[Name] from OASC T2 where T2.[Name] = [%2])
set @UnitBusiness = (Select   distinct SUBSTRING(T3.[Segment_0],10,2) from OACT T3 where ( T3.[Segment_0] = [%3] OR ( 1 = (CASE WHEN [%3] = 'All' THEN 1 ELSE 2 END) ) ))
Select @StartYear,@EndYear,@Dept,@UnitBusiness
The error is like this
1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Must specify table to select from.
2). [Microsoft][SQL Server Native Client 10.0][SQL Server]Statement 'User-Defined Values' (CSHS) (s) could not be prepared.
Can you help me
Thanks in advance

RUN Time error while use filter table in query generator

Hai..
               I have 2 Functions under "Scalar valued functions" in SQL Server,i try to call this functions in Query generator its working fine,result also display correctly, but i click filter table system showing Error Message " Run Time Error,Abnormal program termination" then SAP is get closed,i tested this scenario in 3 Database am getting same error , Is this BUG in SAP B1?There is no error number in error message

This is my function
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- =============================================
-- Author:          <Author,,Name>
-- Create date: <Create Date, ,>
-- Description:     <Description, ,>
-- =============================================
ALTER function [dbo].[Get_TransObjName](@Obj_type NUMERIC(20,5))
returns varchar(500) as
BEGIN
DECLARE @Obj_type_Name varchar(100)
select @Obj_type_Name =
case @Obj_type
when     -2     then     'Opening Balance'
when     -3     then     'Closing Balance'
when     1     then     'oChartOfAccounts'
when     2     then     'oBusinessPartners'
when     3     then     'oBanks'
when     4     then     'oItems'
when     5     then     'oVatGroups'
when     6     then     'oPriceLists'
when     7     then     'oSpecialPrices'
when     8     then     'oItemProperties'
when     12     then     'oUsers'
when     13     then     'A/R Invoices'
when     14     then     'A/R Credit Memo'
when     15     then     'A/R DeliveryNotes'
when     16     then     'A/R Returns'
when     17     then     'oOrders'
when     18     then     'A/P Invoice'
when     19     then     'A/P Credit Memo'
when     20     then     'Goods Receipt PO'
when     21     then     'Goods Returns'
when     22     then     'PurchaseOrders'
when     23     then     'Quotations'
when     24     then     'IncomingPayments'
when     25     then     'Deposit'
when     28     then     'oJournalVouchers'
when     30     then     'JournalEntries'
when     31     then     'oStockTakings'
when     33     then     'oContacts'
when     36     then     'oCreditCards'
when     37     then     'oCurrencyCodes'
when     40     then     'oPaymentTermsTypes'
when     42     then     'oBankPages'
when     43     then     'oManufacturers'
when     46     then     'VendorPayments'
when     48     then     'oLandedCostsCodes'
when     49     then     'oShippingTypes'
when     50     then     'oLengthMeasures'
when     51     then     'oWeightMeasures'
when     52     then     'oItemGroups'
when     53     then     'oSalesPersons'
when     56     then     'oCustomsGroups'
when     57     then     'ChecksforPayment'
when     58     then     'Stock List'
when     59     then     'Goods Receipt'
when     60     then     'Goods Issue'
when     64     then     'oWarehouses'
when     65     then     'oCommissionGroups'
when     66     then     'oProductTrees'
when     67     then     'Inventory Transfers'
when     68     then     'oWorkOrders'
when     69     then     'Landed Costs'
when     70     then     'oCreditPaymentMethods'
when     71     then     'oCreditCardPayments'
when     73     then     'oAlternateCatNum'
when     76     then     'Postdated Deposit'
when     77     then     'oBudget'
when     78     then     'oBudgetDistribution'
when     81     then     'oMessages'
when     91     then     'oBudgetScenarios'
when     97     then     'oSalesOpportunities'
when     93     then     'oUserDefaultGroups'
when     101     then     'oSalesStages'
when     103     then     'oActivityTypes'
when     104     then     'oActivityLocations'
when     112     then     'oDrafts'
when     116     then     'oDeductionTaxHierarchies'
when     117     then     'oDeductionTaxGroups'
when     125     then     'oAdditionalExpenses'
when     126     then     'oSalesTaxAuthorities'
when     127     then     'oSalesTaxAuthoritiesTypes'
when     128     then     'oSalesTaxCodes'
when     134     then     'oQueryCategories'
when     138     then     'oFactoringIndicators'
when     140     then     'oPaymentsDrafts'
when     142     then     'oAccountSegmentations'
when     143     then     'oAccountSegmentationCategories'
when     144     then     'oWarehouseLocations'
when     145     then     'oForms1099'
when     146     then     'oInventoryCycles'
when     147     then     'oWizardPaymentMethods'
when     150     then     'oBPPriorities'
when     151     then     'oDunningLetters'
when     152     then     'oUserFields'
when     153     then     'oUserTables'
when     156     then     'oPickLists'
when     158     then     'oPaymentRunExport'
when     160     then     'oUserQueries'
when     162     then     'Inventory Valuation'
when     163     then     'oCorrectionPurchaseInvoice'
when     164     then     'oCorrectionPurchaseInvoiceReversal'
when     165     then     'oCorrectionInvoice'
when     166     then     'oCorrectionInvoiceReversal'
when     170     then     'oContractTemplates'
when     171     then     'oEmployeesInfo'
when     176     then     'oCustomerEquipmentCards'
when     178     then     'oWithholdingTaxCodes'
when     182     then     'oBillOfExchangeTransactions'
when     189     then     'oKnowledgeBaseSolutions'
when     190     then     'oServiceContracts'
when     191     then     'oServiceCalls'
when     193     then     'oUserKeys'
when     194     then     'oQueue'
when     198     then     'oSalesForecast'
when     200     then     'oTerritories'
when     201     then     'oIndustries'
when     202     then     'oProductionOrders'
when     203     then    'A/R Down Payment'
when     204     then    'A/P Down Payment'
when     205     then     'oPackagesTypes'
when     206     then     'oUserObjectsMD'
when     211     then     'oTeams'
when     212     then     'oRelationships'
when     214     then     'oUserPermissionTree'
when     217     then     'oActivityStatus'
when     218     then     'oChooseFromList'
when     219     then     'oFormattedSearches'
when     221     then     'oAttachments2'
when     223     then     'oUserLanguages'
when     224     then     'oMultiLanguageTranslations'
when     229     then     'oDynamicSystemStrings'
when     231     then     'oHouseBankAccounts'
when     247     then     'oBusinessPlaces'
when     250     then     'oLocalEra'
when     280     then     'oSalesTaxInvoice'
when     281     then     'oPurchaseTaxInvoice'
when     300     then     'BoRecordset'
when     305     then     'BoBridge'
when     260     then     'oNotaFiscalUsage'
when     258     then     'oNotaFiscalCFOP'
when     259     then     'oNotaFiscalCST'
when     261     then     'oClosingDateProcedure'
when     10     then     'oBusinessPartnerGroups'
when     278     then     'oBPFiscalRegistryID'
else cast(@Obj_type as char(20)) end
return @Obj_type_Name
END

Using Variables in Query generator

I'm using the following query to pull a report together later to be used in a query print layout. When i specify the specific part number and customer code it returns what i expect but as soon as i add a variable it says "Must specify table"!
SELECT T0.U_ACI_CAPT, T0.U_ACI_VDS1, T0.U_ACI_VDE1, T0.U_ACI_VSS1, T0.U_ACI_VSE1, T0.U_ACI_VDS2, T0.U_ACI_VDE2, T0.U_ACI_VSS2, T0.U_ACI_VSE2, T0.U_ACI_KWT1, T0.U_ACI_KWT2, T0.U_ACI_SPD1, T0.U_ACI_SPD2, T0.U_ACI_RNC1, T0.U_ACI_RNC2, T0.U_ACI_RNC3, T0.U_ACI_RNC4, T1.ItemCode, T1.Substitute, T0.U_ACI_VDS3, T0.U_ACI_VDE3, T0.U_ACI_VSS3, T0.U_ACI_VSE3, T0.U_ACI_KWT3, T0.U_ACI_SPD3, T0.U_ACI_RNC5, T0.U_ACI_RNC6, T0.U_ACI_ACDC, T0.U_ACI_PHSE, T0.U_ACI_50HZ, T0.U_ACI_60HZ, T0.U_ACI_OFRQ
FROM ((OSCN T1 INNER JOIN ITT1 T2 ON T1.ItemCode = T2.Father) INNER JOIN ITT1 T3 ON T2.Code = T3.Father) INNER JOIN "@ACI_MRBK" T0 ON T3.Code = T0.U_ItemCode
WHERE T1.ItemCode = '[%0]' AND T1.CardCode = '[%1]'
Anyone know how to get these things working?

Hi,
if your problem is similar with this symptom :
Using SAP Business One Survey Variables (parameters) in a 'Set' SQL Statement can give an error in the Query Generator.
here the solution I've got from SAP notes:
In such cases you need to put in an SQL remark statement a reference field in the DB for the Survey Variable (any field).
For Example: (to make the above query work)
Declare @Num as numeric(2)
Set @Num = /* T0.DocNum */ [%0]
Select T0.DocNum
From ORDR T0
Where docnum = @Num
Good luck
Rgds,,

Must specift the table to select from error in query generator.

SELECT OPCH.CardCode,OPCH.CardName, DateName(month,OPCH.TaxDate) + '-' + DateName(year,OPCH.TaxDate) As [Year],OPCH.TransId as [JE Ref],'IN' As [DocType]
,OPCH.DocEntry As [Base DocEntry],OPCH.WTSUM As [Recieved Amount],((OPCH.WTSUM/110.3) * 100 ) As [Invoice Amount],((OPCH.WTSUM/110.3) * 100 * 0.1) As [Service Tax]
,((OPCH.WTSUM/110.3) * 100 * 0.002) As [Edu.Cess],((OPCH.WTSUM/110.3) * 100 * 0.001) As [S.H.Cess]
,((OPCH.WTSUM/110.3) * 100 * 0.1) + ((OPCH.WTSUM/110.3) * 100 * 0.002) + ((OPCH.WTSUM/110.3) * 100 * 0.001) As [Total Service Tax]
FROM OPCH,PCH1
WHERE OPCH.DocEntry = PCH1.DocEntry
AND OPCH.WTSUM > 0
And PCH1.TargetType <> '19'
AND OPCH.DocDate >= [%0]
AND OPCH.DocDate <= [%1]
When i try to run this query in query generator system gives me error msg as "Must specify table to select from" if i remove the last two lines
" AND OPCH.DocDate >= [%0]
AND OPCH.DocDate <= [%1] "
it works fine in the query generator.
can any one help in this regards,
thanks,
praveen

Hai Praveen!
This problem is because of [%0] in query.
Declare @FromDate as datetime
Declare @ToDate as datetime
set @FromDate = (select min(opch.docdate) from opch where opch.docdate >= '[%0]')
set @ToDate = (select max(opch.docdate) from opch where opch.docdate <= '[%1]')
Use this query in first lines of ur query and write your query.
SELECT OPCH.CardCode,OPCH.CardName, DateName(month,OPCH.TaxDate) + '-' + DateName(year,OPCH.TaxDate) As Year,OPCH.TransId as JE Ref,'IN' As DocType
,OPCH.DocEntry As Base DocEntry,OPCH.WTSUM As Recieved Amount,((OPCH.WTSUM/110.3) * 100 ) As Invoice Amount,((OPCH.WTSUM/110.3) * 100 * 0.1) As Service Tax
,((OPCH.WTSUM/110.3) * 100 * 0.002) As http://Edu.Cess,((OPCH.WTSUM/110.3) * 100 * 0.001) As http://S.H.Cess
,((OPCH.WTSUM/110.3) * 100 * 0.1) + ((OPCH.WTSUM/110.3) * 100 * 0.002) + ((OPCH.WTSUM/110.3) * 100 * 0.001) As Total Service Tax
FROM OPCH,PCH1
WHERE OPCH.DocEntry = PCH1.DocEntry
AND OPCH.WTSUM > 0
And PCH1.TargetType '19'
AND OPCH.DocDate >= @FromDate
AND OPCH.DocDate <= @ToDate
Regards,
Thanga Raj.K

User defined query parameter in query generator

Hi All,
i am using query generator in SAP to print some records of user defined query. precisely, the details about sales employees are to be printed. now the columns which exist in the database (ie. sales employee code, name, cardcode) etc can be given as a parameter like [%0] and [%1]. but some user defined parameter such as sales commission does not show as such parameter. i want one column as
select T0.doctotal, (T0.doctotal * [%0]) / 100 as brokerage from OINV T0
--where [%0] is some commission percentage that the user will give while running this query
This query gives correct results but it gives the parameter name as 'doctotal' while showing. any idea as to how to handle it properly in SAP?
thanks in advance,
Binita
Edited by: Binita Joshi on Sep 8, 2009 3:35 PM

I sometimes defined a UDT only for getting the appropriate parameter entering window. The table has no data; I used it only for its field names in this window.
(The parameter request can be placed inside a comment and the entered value is used setting an SQL variable like this:
declare @d datetime
/*select t.createdate from ordr t where t.createdate=[%0]*/
set @d=[%0]
This SQL variable can be used later in the real query.)

About query generator.

SAP B1 2007 A PL46
Hi All,
I have many questions about query generator :
1. It is possible to use or to call a stored procedure ? If yes, how can we implement this ?
2. I try to use this query :
declare @commercial integer
set @commercial = [%0]
declare @prjbegin nvarchar(20)
set @prjbegin = '[%1]'
declare @prjend nvarchar(20)
set @prjend = '[%2]'
SELECT T2.[DocNum], T2.[DocDate], T2.[CardCode], T2.[CardName], T3.[ItemCode], T3.[Dscription], T3.[Quantity] FROM [dbo].[OINV] T2 INNER JOIN [dbo].[INV1] T3 ON T2.DocEntry = T3.DocEntry WHERE T2.[SlpCode] =@commercial AND T3.[Project] >=@prjbegin AND T3.[Project] <=@prjend
but it don't work. How can we do to use this ?
Thanks for your help.
Best regards.
Michael

Hi,
I try this but it's not working :
declare @commercial integer
set @commercial = (SELECT SlpCode FROM OSLP WHERE SlpCode=[%0])
declare @prjbegin nvarchar(20)
set @prjbegin = 'N000001'
declare @prjend nvarchar(20)
set @prjend = 'R000003'
SELECT T2.[DocNum], T2.[DocDate], T2.[CardCode], T2.[CardName], T3.[ItemCode], T3.[Dscription], T3.[Project] FROM [dbo].[OINV] T2 INNER JOIN [dbo].[INV1] T3 ON T2.DocEntry = T3.DocEntry WHERE T2.[SlpCode] =@commercial AND T3.[Project] >=@prjbegin AND T3.[Project] <=@prjend
I have an error that is : you must specify a table name where execute the selection ...
I think we can't use %0 and the statement DECLARE.
Thanks
Michael

Query Generator Funny error message

Hello Experts, Not sure if you ever seen something like this, but be great if anyone can offer me some insight...
on a normal query with parameter I have something like thsi
/*select from ORDR t0*/
declare @begandate as datetime
/* where */
set @begandate = /* t0.docdate*/ '[%0]'
and it runs fine with just about any table, view...etc.. But as soon as you have a UDT in SBO... put in like
/*select from ORDR t0*/
declare @begandate as datetime
/* where */
set @begandate = /* t0.docdate*/ '[%0]'
select * from dbo.[@bos_del_pri] a inner join ordr b on b.u_prioritycode = a.code
where b.docdate = @begandate
it give me funny error messages, "Only one epxression can be specifed in the select list when the subquery is not intrudoced with Exist"
This is ran at a SBO 2005B PL35... when I ran a similar query in SBO 2005A PL45 I get soemthing like
"must specify table to select from".. I know this error message doesn't make sense, but not sure if anyone has encounter the same problem, and if yes possible solutions?
Thank You

Hello Friends,
This is in accordance to provide the information that Query Generator does not work with parameters and User defined tables together. As per my experience in SQL UDT tables start with "@" and variables declared in SQL are also prefixed with "@" so SQL does not make any difference between UDT of SAP and variable of SQL. Thus we are not able to use ([%0] parameters and UDT tables) together.
Please correct me if I am wrong.
Please forgive me if i have posted wrong information
I look forward to your reply.
Regards,
Murtaza

How to add parameters to a stored procedure in B1 Query generator

Dear All,
I made a stored procedure in sql. I'd like to call it from B1. It's working fine when I call like this (I created an empty query in Query generator and paste this) :
exec stproc @projectFrom = '',
                   @projectTo = 'PRJ03',
                   @profitCodeFrom = '',
                   @profitCodeTo = 'uj',
The problem is, Could I call this procedure with parameters like normal queries (select ... where .. = [%0])? Can I pass parameters to it somehow?
Thanks a lot
Jani

Inside B1 :
DECLARE @return_value int
Declare @Fromdate datetime
declare @Todate datetime
declare @supp nvarchar(15)
SELECT * FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry where
T0.cardcode = '%Supp' and T0.DocDate <=%FromDate
and T0.DocDate >=%ToDate
EXEC @return_value=SQL2XMLforINV
@Fromdate= %FromDate,
@ToDate= %ToDate,
@Supp = '%Supp'
SELECT 'Return Value' = @return_value
And in SQL I have a stored procedure :
Starting like this :
PROCEDURE [dbo].[SQL2XMLforINV]
@Fromdate datetime,
@Todate datetime,
@supp nvarchar(15)
AS
DECLARE @bcpCommand AS varchar(3000)
declare @base nvarchar(50)
BEGIN
     SET NOCOUNT ON;
And my error message is in B1 ....
Thanks in advance for your help ....

CAN WE HAVE IF CONDITION IN QUERY GENERATOR

Hi friends,
am, trying to make use of if condition to obtain a set of values in query generator. Its possible to retrieve the required result set using query analyser but not in query generator. am trying to execute the following query
if exists (select owor.u_reactor from owor,oitt where oitt.code=owor.itemcode and owor.u_reactor = 1 and owor.itemcode = '100-100')
begin
                select itt1.u_reactor1 from oitt,itt1 where itt1.father = oitt.code and itt1.father = '100-100'
end
else
if exists (select owor.u_reactor from owor,oitt where oitt.code=owor.itemcode and owor.u_reactor = 2 and owor.itemcode = '100-100')
begin
     select itt1.u_reac_23 from oitt,itt1 where itt1.father = oitt.code and itt1.father = '100-100'
end
else
if exists (select owor.u_reactor from owor,oitt where oitt.code=owor.itemcode and owor.u_reactor = 3 and owor.itemcode = '100-100')
begin
     select itt1.u_reactor4 from oitt,itt1 where itt1.father = oitt.code and itt1.father = '100-100'
end
if it is not possible to write such query in query generator can someone help me with a workaround solution.
Thank u
Vaitheeswaran

Hi,
I dont think Nested IF Statements are allowed in PLD. The reason that u get the result in Query analyser and not in Query Generator is that SAP supports Transact SQL and many SQL Server 2000 functions are not supported.
However there is a work around in Print Layout Designer for using IF condition by having Linked Objects. Kindly see some tutorials regarding Linked fields available on SDN site and think of some other way of implementing this nested IF query.
Regards
Rizwan Hafeez
Team Lead
SAP Addon Development Section
Abacus Consulting - Pakistan

Difference in Query generated by OBIEE for same report

Hi,
I am using a a report(X) in a filter condition.
I am seeing a peculiar issue with OBIEE server. When i am running a report(X) alone, the query generated is different. But when i am using the same report in filter condition of other report(Y), the same report is generating some other query. The first report(X) is running fine but the second(Y) is not running at all.
Case 1(Report X) Query: The report is breaking into 3 parts for different fact tables and combining the data to give result.
Case 2(Report Y): A single query is being formed and within it is fecthing the data from different fact tables using subqueries.
Case2 is creating a lot of problem as the performance is totally poor.
Any suggesstions??
Thanks
Tataji

Hi, we haven't debugged the application or traced the query against the production server (it's in our customer's office) buy I think there's no difference since the query itself has been tested using sqldeveloper against both servers (XE 11.2 and Enterprise 11.1) and the behavior is consistent. By consistent I mean:
- The query executed via sqldeveloper against Oracle XE 11.2 runs ok and so does the application.
- The query executed via sqldeveloper against Oracle Enterprise 11.1 fails with an ORA-01790 error, and so does the application (exceptions are being logged in the Event Log).
To sum up: the same query runs ok in Oracle XE 11.2 and fails in Oracle Enterprise 11.1.
Additional information: we have tried explicit casting the NULL literals to the corresponding data types (in the UNION ALLs) and the query works fine in both versions. ¿Is there an option in ODAC to tell the query generator to write this explicit castings?
Regarding the DB schema and the LINQ query, I'll be sending them asap.
Regards,
Ernesto.

How to define the PLD of a Query generator report

Hi All,
I want to define the PLD of a Query Report. Currently I am Convertning it to Excel format. But my client wants it in PLD format. so please tell me the process of defining the PLD for a Query generator Report.
Thanks & Regards
Pankaj Sharma.

Hi,
When u wrote yr query at that time save yr query
Now yr query is save in "Query Manager"
Open Query Manager > select yr query
There is a button "Create Report"
Create USer Report Window is display "define yr name" and select "Base Temple"
once u save it double click and edit yr PLD....
Hope it a best way to create uer PLD
Thanks
Kevin

Decimal places in Query generator

Hi All,
I am observing a weird behavior in Query generator's execution of a simple sql query. the query is :
Select 0.002834
now, in the general settings - display - amounts , I put the decimal value as 4 or 6, then only it prints 0.0028 or 0.002834.
else it prints 0.00 (if the decimal place is 2). it should ideally have nothing to do with the display of amount. any idea?
(the effect is shown only after you change the decimal display, update it and close and reopen the SAP application.
Thanks,
Binita
Edited by: Binita Joshi on Apr 12, 2010 4:03 PM

Hello Binita,
>I have tried converting it to numeric(19,4) and numeric(19,6) but still the result was same.
Check your decimal places settings in
\Administration\System Initialization\General Settings\Display tab
Check the following values:
- Units (For meaurement)
- Decimals in Query
Now let' s say,
- Unit set to 6 decimal places
- Decimals in Query set to 2
run the following query in query generator:
select cast(0.000245 as decimal(19,6))
result will be
0.00
run the same query as FMS on item master data in any measurement field (lenght)
select cast(0.000245 as decimal(19,6))
result will be
0.000245
Now set the - Decimals in Query set to 6 on \Administration\System Initialization\General Settings\Display tab
run the following query in query generator:
select cast(0.000245 as decimal(19,6))
result will be
0.000245
This is a normal habit of SAP B1 rounding engine / displaying engine.
Regards
J.

Declare func on Query Generator

Similar Messages

Maybe you are looking for