Declaring properties for classes

Hello all,
I need to declare a property for an entire class in a Flash
Actionscript 2.0 file (.as).
Regularly, I would use the line "falling = false", but it
says that that can't be used to define a class or as part of a
function. How can I declare "falling" as a property?
Any help appreciated.

PS - class properties should always be private as well:
class someClass
private var falling:Boolean = false;
function someClass()
Dave -
www.offroadfire.com
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Similar Messages

Error editing task sequence: Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" From XML into WMI

I've started getting an intermittent error editing my Windows 7 OSD task sequence. Sometimes I can open the TS to edit, but when I try to apply changes I get the error. Other times I get the error when trying to open the TS. If I try again
right away, I still get the error, but if I wait a few minutes and try again sometimes it will open the TS.
The error reads:
ConfigMgr Error Object:instance of SMS_Extended Status{Description = "Failed to load dynamic properties for class \"SMS_TaskSequence_ApplyWindowsSettingsAction\" from XML into WMI";Error Code = 2147943746;File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\ssptspackage.cpp";Line = 3454;Operation = "ExecMethod";ParameterInfo = "SMS_TaskSequencePackage";ProviderName = "WinMgmt";StatusCode = 2147749889;}
Coinciding with this error, I show the following entries in the TaskSequenceProvider.log file:
[PID: 7608] Invoking method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Failed to protect memory buffer, hr=0x80070542
TaskSequenceProvider
Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load node Apply Windows Settings from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "PostInstall" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "Execute Task Sequence" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load XML for the task sequence into WMI 0x80070542 (2147943746)
TaskSequenceProvider
[PID: 7608] Done with method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Setting status complete: status code = 0x80070542; Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI
TaskSequenceProvider
I exported the task sequence and checked in "object.xml" for the "ApplyWindowsSettingsAction", to see if there was something odd in the xml, but I don't find anything that jumps out as being wrong. Here's the section of XML for
that step. I've removed identifying info, and replaced it with a generic term in bold.
<step type="SMS_TaskSequence_ApplyWindowsSettingsAction" name="Apply Windows Settings" description="" runIn="WinPE" successCodeList="0" runFromNet="false"><action>osdwinsettings.exe /config</action><defaultVarList><variable name="OSDLocalAdminPassword" property="AdminPassword"></variable><variable name="OSDComputerName" property="ComputerName">%_SMSTSMachineName%</variable><variable name="OSDProductKey" property="ProductKey"></variable><variable name="OSDRandomAdminPassword" property="RandomAdminPassword">false</variable><variable name="OSDRegisteredOrgName" property="RegisteredOrgName">COMPANY NAME</variable><variable name="OSDRegisteredUserName" property="RegisteredUserName">COMPANY NAME</variable><variable name="OSDServerLicenseConnectionLimit" property="ServerLicenseConnectionLimit">5</variable><variable name="OSDTimeZone" property="TimeZone">Central Standard Time</variable></defaultVarList></step><step type="SMS_TaskSequence_ApplyNetworkSettingsAction" name="Apply Network Settings" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>osdnetsettings.exe configure</action><defaultVarList><variable name="OSDDomainName" property="DomainName">DOMAIN.COM</variable><variable name="OSDJoinPassword" property="DomainPassword"></variable><variable name="OSDJoinAccount" property="DomainUsername">DOMAIN ACCOUNT</variable><variable name="OSDEnableTCPIPFiltering" property="EnableTCPIPFiltering" hidden="true">false</variable><variable name="OSDNetworkJoinType" property="NetworkJoinType">0</variable><variable name="OSDAdapterCount" property="NumAdapters" hidden="true">0</variable></defaultVarList></step>
Is there any other log I should check for a clue on this issue? What could be causing this error?

Thanks for sharing that! I tend to save contacting MS support until after I've exhausted other options. I'm always afraid that I'll spend the $500 to open a case and then it turns out to be something simple that I would have found if I had just
kept working on it myself a little longer.
It looks like that link is for an update released in February as KB3023562. I downloaded and installed it. I'll try opening/editing/saving the task sequence a few times today to see if the issue is resolved.
After I had already installed it, I thought to look up that update in configmgr. The update is listed as superseded by 2 other updates. The newest of those is KB3046049, which just installed last night with the other March patches, so it's possible
that I didn't need to install KB3023562 after all.

Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002

Following situation. In SCCM we have one Standalone Primray Site Server and two Site Server. The two site server are also SMS Provider. MDT 2012 was installed on all three Servers and the Config Manager Integration was run. When starting the Console
on any of this server and editing an MDT Task Sequence, it occasionally pops up an error "An error occured when loading the task sequence". TaskSequenceProvider.log File throws a lot of errors:
[PID: 2824] Invoking method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load node Use Toolkit Package from XML into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load children steps for node "Applikation" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load children steps for node "" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load XML for the task sequence into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
[PID: 2824] Done with method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Tried removing the integration on all SMS Provider Machines and readded them. It does not make a differenence. Does anyone know if MDT supports the use of multiple SMS Providers? When I only use one Provider and deinstall the other two, it works ok.

Some more info from the log files:
TaskSequenceProvider.log
[1680680 PID:5228] Initializing provider for namespace root\sms\site_P01 TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[1680680 PID:5228] Initialization of provider for namespace root\sms\site_P01 succeeded TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[PID: 5228] Invoking method SMS_TaskSequence.ExportXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to export task sequence to XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[PID: 5228] Done with method SMS_TaskSequence.ExportXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Setting status complete: status code = 0x80041002; Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[PID: 5228] Invoking method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load node Use Toolkit Package from XML into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load children steps for node "Applikation" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load children steps for node "" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load XML for the task sequence into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[PID: 5228] Done with method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Setting status complete: status code = 0x80041002; Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
SMS Provider logs the following:
CExtUserContext::EnterThread : User=A2\trth1 Sid=0x0105000000000005150000001BB949E9D7F6AADBC3309AA56BAB0000 Caching IWbemContextPtr=0000000005777900 in Process 0x9f8 (2552) SMS Provider 20.06.2012 10:51:47 3008
(0x0BC0)
Context: SMSAppName=SMS Administrator Console SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: MachineName=vswlieca2146.A2.loc SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: UserName=A2\trth1 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: ObjectLockContext=fdf8ab87-cf50-43bd-a48a-d5bb99c8034f SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: ApplicationName=Microsoft.ConfigurationManagement.exe SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: ApplicationVersion=5.0.0.0 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: LocaleID=MS\0x409 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __ProviderArchitecture=32 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __RequiredArchitecture=0 (Bool) SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __ClientPreferredLanguages=en-US,en SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __GroupOperationId=590802 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __WBEM_CLIENT_AUTHENTICATION_LEVEL=6 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CExtUserContext : Set ThreadLocaleID OK to: 1033 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CSspClassManager::PreCallAction, dbname=CM_P01 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
ExecMethodAsync : SMS_ObjectLock::ReleaseLocks SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Requested class =SMS_ObjectLock SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Requested num keys =0 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CExtProviderClassObject::DoExecuteMethod ReleaseLocks SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CSspSEDO::ReleaseLocks: ********** Releasing SEDO Lock for object SMS_TaskSequencePackage.PackageID="P010013A" for user A2\trth1. ********** SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CExtUserContext::LeaveThread : Releasing IWbemContextPtr=91715840 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)

How to access variables declared in java class file from jsp

i have a java package which reads values from property file. i have imported the package.classname in jsp file and also i have created an object for the class file like
classname object=new classname();
now iam able to access only the methods defined in the class but not the variables. i have defined connection properties in class file.
in jsp i need to use
statement=con.createstatement(); but it shows variable not declared.
con is declared in java class file.
how to access the variables?
thanks

here is the code
* testbean.java
* Created on October 31, 2006, 12:14 PM
package property;
import java.beans.*;
import java.io.Serializable;
public class testbean extends Object implements Serializable {
public String sampleProperty="test2";
public String getSampleProperty() {
return sampleProperty;
}jsp file
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ page import="java.sql.*,java.util.*"%>
<html>
<head>
<title>Schedule Details</title>
</head>
<jsp:useBean id="ConProp" class="property.testbean"/>
<body>
Messge is : <jsp:getProperty name="msg" property="sampleProperty"/>
<%
out.println(ConProp.sampleProperty);
%>
</body>
</html>out.println(ConProp.sampleProperty) prints null value.
is this the right procedure to access bean variables
thanks

Declaring Argument as Class of Enum That Implements Interface

I'm trying to declare a method parameter that is the class of an enum which implements a specified interface. I can't figure out the required syntax, or if this is even possible.
Here is the interface:
public interface Describer { String describe(); }_________________________________________________
Here' s an enum that implements the interface:
public enum DeviceProperty implements Describer {
TYPE("Device Type"),
USE("Device Use");
private String description;
private DeviceProperty(final String description) { this.description = description; }
@Override public String describe() { return description; }
Here's my unsuccessful attempt to declare the method parameter:
public <E extends Enum<E extends Describer>> void addChanges(final Class<E> properties) {
     final EnumSet<E> set = EnumSet.allOf(properties);
     for (final Enum<E> property : set) {
          // Do something with the property
The problem, of course, is that addChanges() doesn't compile. If I remove "extends Describer" it compiles, but then I can't detect compile time errors (i.e., an enum which doesn't implement Describer).
Is what I'm attempting even possible in Java? If so, I'd be very grateful if someone could explain the correct syntax.

doremifasollatido wrote:
TPD Opitz-Consulting com wrote:
aksarben wrote:
[...]Here's my unsuccessful attempt to declare the method parameter:
public <E extends Enum<E extends Describer>> void addChanges(final Class<E> properties)
Nothing is being returned at all. The method return type is "void".OK.
Then I understand that <tt><E extends Enum<E extends> & Describer></tt> is a more detailed definition for the parameter type <tt>Class<E></tt>, right?
And your method iterates over all the constants defined in the passes enum type.
Meight be usefull sometiems.. thanks!
bye
TPD

Declaring top level classes instead of subclasses

I seem to have misunderstood something very basic.
It's always better, where possible, to declare the top-level class instead of the sub-class, right?
Ok, then why do I have the following problem?
I declare, from the JavaMail API the following:
Message theMessage = new MimeMessage(session);instead of declaring directly the subclass like this:
MimeMessage theMessage = new MimeMessage(session);but when I use a method which is only found in the MimeMessage class I get a compile error.
[javac] 189. theMessage.setSubject(subject, "iso8859_1");
[javac] <-------------------------------->
[javac] *** Error: No match was found for method "setSubject(java.lang.String, java.lang.String)".
Have I really misunderstood something so basic?? Surely the compiler knows that theMessage is an instance of MimeMessage??
Any clear explanation to explain why I get this compile error would be gratefully received. I have been faithfully declaring top-level classes instead of subclasses in my code, but if the compiler doesn't let you do so, then what's the point?

Ok, my confusion was started by an article on the
Collection classes which stated that:
Map theMap = new HashMap(); was better
programming practice.
Yep.
But the Map class is an Interface, right? - Whereas
Message is a normal class with subclass MimeMessage.
I think that's where my confusion started.Well, this isn't really a class vs. interface difference. It goes to which class (or interface) is the "highest" (closest to Object) and still has all the public interface you need.
There are cases where you'll declare a variable to be of a base class type like Message.
You just need to get into the habit of separating the left side of the = from the right side. On the left, you put the bare minimum that completely meets your needs. You say, "I need a List" or "I need a Map" or "I need a SortedMap" (a subinterface of Map) or "I need a Message" or "I need a MimeMesage".
Then, on the RHS =, you decide which particular class best implements the public interface that you said you need (by declaring it on the LHS). "For my Map, I'll use a HashMap." "For my Message, I'll use a MimeMessage." "For my MimeMessage, I'll use a MimeMessage".

How to set up display properties for a crosstab is CSS?

I am woundring how to setup css class and code like in this tutorial.
myalerting.css ?
Set up display properties for a crosstab: Design Studio 1.2 - YouTube.
Design Studio 1.2: Set up display properties for a crosstab
if you have sample file please share I am sure other can be befits from as well.
I would like to use color display on numbers or icons in seperate column if the value in certain range or a value is below or avove business needs.
Thanks.

Kevin,
I could not get this to work on my installation; perhaps you can review and "run with it" or someone better with CSS can assist.
The gist of it is there is a class .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background to define the status symbol for the alerts
Based on your Exceptions in the BEx query, Good 1 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
Good 2 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
etc... Bad 3 (red symbol) is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9Background
I tried the following custom CSS on the crosstab, note using IE (which now we can no longer use until Microsoft patches)
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlternating{
background-color:#F9F9F9 !important;
myAlerting.sapzencrosstab-DataCellDefault{
background-color:#FFFFFF !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_1.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert2Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_2.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
color:rgba(0,0,0,0.0);
background-image:url('green.png');
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9StatusSymbol
color:rgba(0,0,0,0.0);
background-image: url('aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_9.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
I didn't want to hold you up and for sure I hope there is someone in the community who could help. I'll try again when we can use IE

Sun ONE Studio 4 aka Forte: How to set the output path for classes ?

Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
Rolf

You can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set!

UML modeling for class diagrams, could not generate code for modified diagr

Hi,
I'm using Java studio Enterprise for creating class diagrams and generating code from the UML using round trip engineering. I'm able to create class diagrams and generate code from the diagram. I tried modifying java code for classes and saved it. Now if I try and modify the diagram its not updating the java code associated with it.
Please suggest the workaround or so.
Thanks
Sunita

Maybe the linkage between the source and model class element is broken. Try to expand the class element from the project tree to see if a source file artifact node (under the class that displays the pathname as the name of the node). If not, that's why. Then, the workaround is to manually add the pathname to the java source file. Here are the steps:
- expand the class in question
- select the source file artifact node
- from the properties window on the right side of the ide, enter the exact pathname to the java source file and press the Enter
It should work now.

[svn:fx-trunk] 11575: Put default style declarations into one class per application or module.

Revision: 11575
Author:   [email protected]
Date:     2009-11-09 11:34:57 -0800 (Mon, 09 Nov 2009)
Log Message:
Put default style declarations into one class per application or module.
Generate all the default styles in one class instead of a class for each style. The name of the style class will be based on the application or module name. An application named ?\226?\128?\156foo?\226?\128?\157 will have a style class named ?\226?\128?\156_foo_Style?\226?\128?\157. The idea is to allow applications to be compiled with different themes and get their owns styles. Currently this is not possible because a global style in both themes will have the same class name, _globalStyle. Whatever class the top-level application loads the sub-applications and modules will have to use the same class because of the flash player first-class-in-wins rule. Now each application and module will have their own style class.
QE notes: None.
Doc notes: None.
Bugs: SDK-22454
Reviewer: Paul, Pete
Tests run: checkintests, all mustella tests.
Is noteworthy for integration: No.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22454
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleDef.vm
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StylesContainer.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java

Revision: 11575
Author:   [email protected]
Date:     2009-11-09 11:34:57 -0800 (Mon, 09 Nov 2009)
Log Message:
Put default style declarations into one class per application or module.
Generate all the default styles in one class instead of a class for each style. The name of the style class will be based on the application or module name. An application named ?\226?\128?\156foo?\226?\128?\157 will have a style class named ?\226?\128?\156_foo_Style?\226?\128?\157. The idea is to allow applications to be compiled with different themes and get their owns styles. Currently this is not possible because a global style in both themes will have the same class name, _globalStyle. Whatever class the top-level application loads the sub-applications and modules will have to use the same class because of the flash player first-class-in-wins rule. Now each application and module will have their own style class.
QE notes: None.
Doc notes: None.
Bugs: SDK-22454
Reviewer: Paul, Pete
Tests run: checkintests, all mustella tests.
Is noteworthy for integration: No.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22454
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleDef.vm
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StylesContainer.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java

Hello...Java is supporting mutiple datatypes declarations in for loop

hello,
is it possible to declare more than one data types in a for loop...i think java is supporting multiple declarations in for loop..am i right
class check
     public static void main(String[] args)
          for(int i=10,float k=10;i<5;i++)
               System.out.println("Hello World!"+i);
regards,
j.mouli

Hi,
no, that doesn't work because java unlike c++ does not
have the comma operator ",". So you need to declare
the 2nd variable in the body of the loopNot strictly correct - its true that it won't work in this case, but false that Java doesn't recognise the comma.
If your two variables were of the same type you could use something like
for (int i = 0, k = 10; i < k; i++)
However, the initialisation must take place in a single statement, so you can't use multiple types

Converter-for-class

Is converter-for-class or any other "-for-class" attributes required to match against subclasses of the specified class, or just the class itself?
It you specify converter-for-class as Object, is the converter required to apply to every subclass of Object (i.e. every class), or just to those properties with a runtime value of exactly Object?
Thanks.

Hello BalusC,
thanks for reply. I'm definitely use JSF RI 1.2_13.
The problem is, that the converter-method public String getAsString( FacesContext p_ctx, UIComponent p_comp, Object p_value ) is never called.
But the other method public Object getAsObject( FacesContext p_ctx, UIComponent p_comp, String p_value ) is called.
BalusC, which JSF implementation do you use?
regards, Joerg

Setting styleable properties & pseudo-class state to controls in JavaFX 2.2

Hi All,
Greetings!
Can anyone please let me know how to create or set styleable and pseudo-class state properties for custom controls developed with JavaFX 2.2.
I found a very nice wiki regarding this. (https://wikis.oracle.com/display/OpenJDK/CSS+API+to+support+custom+UI+Controls)
But this seems to be with JavaFX 8 version. As i cannot find PseudoClass in the current version of JavaFX 2.2.
Thanks & Regards,
Sai Pradeep Dandem.

There is no public API in 2.2 for adding adding styleable properties and pseudo-class state to controls in JavaFX 2.2.
The implementation between 2.2 and 8.0 changed significantly in terms of API, class names, etc. The model is roughly the same, but if you implement something in 2.2 using the private implementation APIs, it will not work, and may not even compile, in 8.0.
// A pseudo-class in 2.2
    private BooleanProperty foo = new BooleanPropertyBase() {
                @Override
                protected void invalidated() {
                    impl_pseudoClassStateChanged("foo");
                @Override
                public Object getBean() {
                    return MyControl.this;
                @Override
                public String getName() {
                    return "foo";
    public boolean isFoo() {
        return foo.get();
    public void setFoo(boolean newFoo) {
        foo.set(newFoo);
    private static final long FOO_PSEUDOCLASS_STATE = StyleManager.getInstance().getPseudoclassMask("foo");
    @Override
    public long impl_getPseudoClassState() {
        long mask = super.impl_getPseudoClassState();
        if(isFoo()) mask |= FOO_PSEUDOCLASS_STATE;
        return mask;
// A styleable property in 2.2. import classes from com.sun.javafx.css
        public DoubleProperty bar = new StyleableDoubleProperty(0.0) {
                    @Override
                    public StyleableProperty getStyleableProperty() {
                        return BAR;
                    @Override
                    public Object getBean() {
                        return MyControl.this;
                    @Override
                    public String getName() {
                        return "bar";
// API used by css in 2.2
        private static final StyleableProperty<MyControl,Number> BAR =
            new StyleableProperty<MyControl,Number>("-my-bar",
                SizeConverter.getInstance(), 0.0) {
                @Override
                public boolean isSettable(MyControl ctl) {
                    return bar.isBound() == false;
                @Override
                public WritableValue<Number> getWritableValue(MyControl ctl) {
                    return ctl.bar;
         private static final List<StyleableProperty> STYLEABLES;
         static {
             final List<StyleableProperty> styleables = new ArrayList<StyleableProperty>();
             Collections.addAll(styleables,
                 BAR
             STYLEABLES = Collections.unmodifiableList(styleables);
     public static List<StyleableProperty> impl_CSS_STYLEABLES() {
         return STYLEABLES;
    public List<StyleableProperty> impl_getStyleableProperties() {
        return impl_CSS_STYLEABLES();
    }

Javax.xml.bind.JAXBException: Unable to locate jaxb.properties for package ...

I want to marshall a java content tree (generated with jaxb api) in xml stream
in an EJB.
Generated classes are archived in a jar file containing its jaxb.properties, when
I test it
in a classic java process it runs well.
When I try to do it in an EJB with weblogic 8.1 I get the following error:
javax.xml.bind.JAXBException: Unable to locate jaxb.properties for package
I've checked:
- jaxb.properties is in the archive file
I've tried to put the jar file in the classpath of the server in the starter script.
I've tried to put reference classpath in the manifest of the ejb jar and of application
ear.
I've tried to put both reference in server classpath and ear/jar manifest.
I still doesn't run.
Any idea?
Thanks a lot
Franck

Add the directory of the generated classes in the classpath.
"franck" <[email protected]> wrote:
>
I want to marshall a java content tree (generated with jaxb api) in xml
stream
in an EJB.
Generated classes are archived in a jar file containing its jaxb.properties,
when
I test it
in a classic java process it runs well.
When I try to do it in an EJB with weblogic 8.1 I get the following error:
javax.xml.bind.JAXBException: Unable to locate jaxb.properties for package
I've checked:
- jaxb.properties is in the archive file
I've tried to put the jar file in the classpath of the server in the
starter script.
I've tried to put reference classpath in the manifest of the ejb jar
and of application
ear.
I've tried to put both reference in server classpath and ear/jar manifest.
I still doesn't run.
Any idea?
Thanks a lot
Franck

JAXB: Unable to locate jaxb.properties for package com.globalrefund.jaxb

When I package my classes into a jar and try to run my app with
java -jar myapp.jar
I get "Unable to locate jaxb.properties for package com.globalrefund.jaxb"
Everything works fine when I run my app by setting the classpath followed by "java com.globalrefund.MainClass".
"jaxb.properties" is in the jar in the directory "com.globalrefund.jaxb". I use JRE 1.4.1.
What's wrong?
Regards,
Bernhard

a little additional info:
It works when I put jaxb.properties in the directory com.globalrefund.jaxb and let classpath point to the root of the directory structure.
If I create a jar containing exactly the same directory structure and add the jar to the classpath it does not work.
Looks like JAXB cannot read jaxb.properties from a jar?!
Any ideas?
Thanks
Bernhard

Declaring properties for classes

Similar Messages

Maybe you are looking for