"Default" attribute in XML not getting populated in BPEL process

Hi.
I have a SOA 11g composite that listens to an inbound MQ (using JMS Adapter), which handovers the request to a BPEL process.
In the input xml, some of the elements have "default" attribute. So, if the user doesnot populate these values in the input, it should be populated with the default values.
But in BPEL Process when I read these values, it comes as null instead of the default value.
Could some one help me out if there is a way to handle this?
K.P

Hi,
Please check if you have some values in ZMATRL2 while data laod to CUbe.
If yes , then run and attribute change run for ZMATRL2.
Also check if you have daat laoded for ZMATRL2 where we have its attribute ZCMARKET values corresponding to ZMATRL2T.
These are are probable reasons why u cannot see navigations attribute data.
Thanks
Mukesh

Similar Messages

  • Default Value in a DFF is not getting populated in Self Service Page

    I had an issue in Self Service Page.
    In the SS page there is hidden mandatory field in DFF segment,which should get populated with a default select statement.
    But this field is not getting populated with the default values.
    But this is working fine in Forms , i.e the default value is populated in forms.
    Why the default value is not populated in Self Service Pages?
    For Eg: If there is a DFF "SAMPLE_DFF" which has some context with segment
    Context Code : GB_CODE
    Segment : "Enter the Group"
    and this segment is made required and defaulted with a select stmt (select stmt returns 'XXXXX')
    In forms if am not entering any value, then its defaulted to 'XXXXX'.
    But in Self Service this is not happening.
    Can anybody help me out...

    Actually, I have narrowed down the problem. It is not quite the same.
    DFF is Receivables, Address Information (Release 12). We have 2 attributes defined and we want the default value of the 2nd to be dependent on what the user selects in the 1st.
    So the default value of the 2nd is defined as a SQL Statement, select :$FLEX$.INDUSTRY_CODE from dual (where INDUSTRY_CODE is the value set name from the 1st).
    We know the syntax is correct because if we actually hardcode a default value in the 1st attribute (select 'BLAH' from dual), then we do see that the default value for the 2nd attribute fills in with BLAH as well. However, we do not want that. We want the user to choose a value for the 1st attribute from the LOV, and then have the 2nd attribute default to that same value. This is the part that does not seem to work in OAF, but definitely used to work in Forms.
    Any thoughts?
    Thanks much!

  • SRM 7.0 extended : Account assignment is not getting populated by default

    Hi All,
    We have created Purchase order using shopping cart in SRM 7.0 extended classic scenario. Assuming that the delivery from the vendor is done. In Goods receipt The Account assignment is not getting populated by default. If we did the same manually it is picking up the details by default.
    please let me know what we are missing.
    Regards,
    Lakshmi Narayana

    Hi Laksmi
    Account info must defaulted if it is not direct procurement.
    check or you ordering as direct or not? if you have SC has Acc data and it must be copied into PO by default...
    Muthu

  • OVS value not getting populated in field

    Hi Experts,
    Kindly suggest me a solution for the below given issue.
    I have added three custom fileds to an already existing WD Coponent.
    And also added OVS help as an input help method to these fields.
    If I right click on the WD application and TEST, the application opens in browser and I am able to select the value from OVS list.
    If I run the application by copying the URL and paste it in the browser, or clicking on Portal link, if we select the value from OVS list that value is not getting populated in the field.
    Below is the logic I have written.
    method ON_OVS_PAYMENT .
    TYPES:   BEGIN OF ty_payment,
                 payment TYPE char4,
                 desc    TYPE char30,
               END OF ty_payment.
    * declare data structures for the fields to be displayed and
    * for the table columns of the selection list, if necessary
      types:
        begin of lty_stru_input,
    *   add fields for the display of your search input here
          payment type char4,
    *      desc    type string,
        end of lty_stru_input.
      types:
        begin of lty_stru_list,
    *   add fields for the selection list here
          payment type char4,
          desc    type char30,
        end of lty_stru_list.
      data: ls_search_input  type lty_stru_input,
            lt_select_list   type standard table of lty_stru_list,
            ls_text          type wdr_name_value,
            lt_label_texts   type wdr_name_value_list,
            lt_column_texts  type wdr_name_value_list,
            lv_window_title  type string,
            lv_group_header  type string,
            lv_payment       type string,
            lt_payment       TYPE TABLE OF ty_payment,
            ls_payment       TYPE ty_payment,
            lv_short         TYPE string,
            lv_table_header  type string.
      field-symbols: <ls_query_params> type lty_stru_input,
                     <ls_selection>    type lty_stru_list.
      case ovs_callback_object->phase_indicator.
        when if_wd_ovs=>co_phase_0.  "configuration phase, may be omitted
    *   in this phase you have the possibility to define the texts,
    *   if you do not want to use the defaults (DDIC-texts)
          ls_text-name = `PAYMENT`.  "must match a field name of search
          ls_text-value = `Terms of payment`. "wd_assist->get_text( `001` ).
          insert ls_text into table lt_label_texts.
          ls_text-name = `PAYMENT`.  "must match a field in list structure
          ls_text-value = `Terms of Payment`. "wd_assist->get_text( `002` ).
          insert ls_text into table lt_column_texts.
          ls_text-name = `DESC`.  "must match a field in list structure
          ls_text-value = `Description`. "wd_assist->get_text( `002` ).
          insert ls_text into table lt_column_texts.
          ovs_callback_object->set_configuration(
                    label_texts  = lt_label_texts
                    column_texts = lt_column_texts
                    group_header = lv_group_header
                    window_title = lv_window_title
                    table_header = lv_table_header
                    col_count    = 2
                    row_count    = 20 ).
        when if_wd_ovs=>co_phase_1.
          ovs_callback_object->context_element->get_static_attributes(
              importing static_attributes = ls_search_input ).
    *     pass the values to the OVS component
          ovs_callback_object->set_input_structure(
              input = ls_search_input ).
        when if_wd_ovs=>co_phase_2.
          if ovs_callback_object->query_parameters is not bound.
    ******** TODO exception handling
          endif.
          assign ovs_callback_object->query_parameters->*
                                  to <ls_query_params>.
          if not <ls_query_params> is assigned.
    ******** TODO exception handling
          endif.
    *     call business logic for a table of possible values
    *     lt_select_list = ???
          lv_short = <ls_query_params>-payment.
          CALL FUNCTION 'ZSIILESD001' DESTINATION 'LOGICALE22'
          EXPORTING
          i_payment             = lv_short
          TABLES
          ET_PAYMENT            = lt_payment.
        lt_select_list[] = lt_payment[].
          ovs_callback_object->set_output_table( output = lt_select_list ).
        when if_wd_ovs=>co_phase_3.
    *   apply result
          if ovs_callback_object->selection is not bound.
    ******** TODO exception handling
          endif.
          assign ovs_callback_object->selection->* to <ls_selection>.
          if <ls_selection> is assigned.
            ovs_callback_object->context_element->set_attribute(
                                   name  = `PAYMENT`
                                   value = <ls_selection>-payment ).
          endif.
      endcase.
    endmethod.

    Hi Pradeep,
    I don't think it really make any difference to the application run if we run from SE80 or run via application url.
    Try to set the external break point in OVS PHASE3 for your user. Check if the break point is reached and data is set after selection from OVS.
    Regards,
    Rama

  • In FIM datasource creation,model name dropdown menu not getting populated

    Hi
    When we try to create a new datasource in FIM it asks for a default model name. The default model name drop down menu is not getting populated by the model name. Please suggest what could be the possible solution for the same.
    Regards

    Hello,
    There are 3 other things to check if the PCM schema is on a Oracle database :
    From FIM server :
    1.a. Locate the "ojdbc6.jar" file located in the \jdbc\lib subfolder of your Oracle client installation folder and copy it.
    1.b.  Paste the copied file in C:\Program Files\Business Objects\Tomcat6\webapps\fim\WEB-INF\lib folder.
    Note: This procedure is mandatory for an Oracle repository. Adding the path to the classpath variable is not
    sufficient.
    2. From the Tomcat Management Console properties, you need to add the path to the location where the tnsnames.ora file is hosted. You add this information on the Java page of the Apache Tomcat Properties dialog box under "Java options", for example, -Doracle.net.tns_admin=C:\oracle\product\10.2.0\client_1\NETWORK\ADMIN
    3. From the parameter "Net service name" filed for PCM datastore in FIM, make sure that the name matches exactly (case-sensitive) with the name of the service set into the Tnsnames.ORA file
    Hope these additionnal findings would help you.
    Thi Anh Antunes

  • In VA01  In Schedule line Delivery date not getting populated

    Hello,
    We have developed enhancement for VA01 tcode.
    Depending upon the quatity entered for a material it should show one more item as free good.
    If quatity is 10 for a line item 10 then it should show item 20 by default same mateerial and quatilty as 1.We have done this it is working fine.
    But if we select free good item in our case it is 20 and click on schedule line item buttom all quaitity fields getting populated.but delivery date not getting populated for only free good.for line item 10 it showing properly.
    Can any one please suggest what i need to do in order to display delivery date for free good.
    Thanks in advance.
    Regards.

    Thanks for your response.
    Actually i have seen technical settings for that field.it is rv45a-etdat.this field has value till MV45AFZZ.seen in debugger.
    Looks like it is clearing some where after the above include.Any suggisitions welcome.Thanks again.

  • Taxcode not getting populated in MIRO Header in Dropdown

    Hi All,
    We created a new Taxcode through FTXP transaction for country and TAX schema and maintained condition records in FV11 transaction for relevant conditions.
    We created a PO with new tax code received goods.
    But while in transaction MIRO for LIV , new tax code is not getting populated at header in TAXCODE field.
    I have checked SDn for the same , they have specified OBTZ transaction for taxcode.
    I havent used this T.code in my previous assignments.
    Please throw some light on the same.
    With Regards,
    Vijaykumar P

    Hi All,
    Thaks for reply,
    But default tax code is maintained in OMR2.
    In MIRO transaction if we go to tax code tab and click Calculate Tax, the tax code in Basic data tab should get updated and all taxes has to be calculated correctly.
    But in this case the taxes are not calculated and taxcode is not appearing in dropdown also.
    Please do throw some light.
    With Regards,
    Vijaykumar P

  • Dbacockpit overview pane does not get populated

    Hi guys,
    I have already gone through the several other threads on sdn which repeat the same issue here but I am not able to find a solution via them. Can any one give me some leads into this...
    -- CHANGES DONE --
    We applied all relevant support packs which were part of Support stack 13. This involved also patching SAP BASIS from 10 to 13. Also NW04S 700 kernel was upgraded to patch 114 (SAPEXE and SAPEXEDB SAR packages)
    STATEMENT OF PROBLEM(S)
    Tcode dbacockpit does not refresh data in the overview pane.
    note: db02old still works and we are able to refresh stats from there but dbacockpit overiew pane does not get populated.
    Also post support packs: “sap_collector_for_performance” runs successfully but reports in job log “database system is not supported”
    When we do a refresh via dbacockpit, the job “refresh space statistics” ends with a “compute bcd overflow” dump.
    CHECKS ALREADY MADE
    --Note 1066044 – for the BCD overflow dump – does not help. We are already at BASIS pack 13 and the correction contained in the note is already in place. As
    per the note since are already at BASIS SP13 we should not be facing this. Why are we facing this then ?
    --Note 868063
    Call report rsoracup; put in con_name=DEFAULT; operatio=CREATE;F8 – did this.
    --Note 1002840.(checks done as per note)
    a) Check if SAP_Collector_for_perfmonitor is scheduled hourly
    It completes successfully but gives job log below
    1/16/2007 12:06:14 Job started
    1/16/2007 12:06:14 Step 001 started (program RSCOLL00, variant , user ID DDIC)
    1/16/2007 12:06:14 Clean_Plan:Cleanup of DB13 Plannings
    1/16/2007 12:06:14 Clean_Plan:started by RSDBPREV on server
    1/16/2007 12:06:14 Clean_Plan:Cleaning up jobs of system xxx
    1/16/2007 12:06:14 Clean_Plan:finished
    1/16/2007 12:06:15 Database system not supported
    1/16/2007 12:06:17 Job finished
    Why ?? (we got oracle 10.2.0.2)
    b) se16 -> table TCOLL. Check if entery RSORACOL exists.
    It does exist as below
    RNAME RSORACOL
    RENUM 1
    SYTYP S
    ALTSY
    DAYOW XXXXXXX
    TIMOD XXXXXXXXXXXXXXXXXXXXXXXX
    c)SE16 -> table ORA_MON_DBCON. Check for enrry con name: DEFAULT.
    It does exist as below
    CON NAME DEFAULT
    STATUS A
    MAX RUNTIME 1,800
    MAX UPLOAD 1,000,000
    LOG LIFE 100
    DESCRIPTION Local database. R/3 system available.
    d)se16 -> table db02_coll_plan. Check if all the entries have status A and there are 64 entries. This is ok
    --Note 1042725
    SE16-> PROGDIR for Name= 'LSDBORA3F03'; Set field EDTX to blank
    All entries have EDTX blank but there is no entry 'LSDBORA3F03’
    Despite all the above checks I am unable to get the dbacockpit to refresh. Does anyone have any ideas. Will putting in the latest DBSL shared library patch for oracle solve this... I did SAPEXE and EXEDB.SAR latest. Any ideas...?
    Cheers, Vikram
    [email protected]

    For this issue it's still not working for me in Sanbox BI. I got a SAP message open for this. But I got it to work on Dev and TST systems. There was one mistake I was making. This may not be the cause though but just for your info. When we go to dbacockpit, click on collector setup icon. And there when we give connection name = "default" and then action as "create connection", I was not saving the variant. Click save and give a name to the variant like "refresh stats" or something. Then click refresh icon so that the "Refresh space statistics" will run in background. When I saved the variant on dev and test BI I did not end with a BCD overflow dump for the  "refresh space statistics" job.The refresh space stat job needs to find the variant name.And this then populated the dbacockpit -> space -> overview pane. Although the "perf for monitor" job still has log entries "db system not supported" that doesn't matter. It's probably a message we can ignore.
    Also if you are still facing prob, check these.
    You say you are on SP12 which SP component are you referring to (stack number ?. BASIS ? BW ?). Make note I have done the support stack 13 which contains upto the BW patch upto 15 and upto BASIS patch 13. Note 1066044 says if you have BASIS 13 you won't face this problem .
    Is your "perf for collector" job running without issues. That is a prereq to the "Refresh space stats" job. Try to troubleshoot that as well. I think the refresh stats job has to find the data in table MONI which gets populated via "perf for collector" (RSCOLL00).
    regards, Vikram

  • Field in ALV not getting populated

    Hi all,
               I need some help. I am displaying an ALV with fields.
        GROUP     G/L ACCOUNT     Local currency       USD     Period
           100              10                       5                       5           12
           100               11                      6                       4            12
      now i have added an extra field TXT20 in the as last field of structure
        GROUP     G/L ACCOUNT     Local currency       USD     Period      TXT
           100              10                       5                       5           12          aa
           100               11                      6                       4            12         ab
    TXT should come as 3rd coloumn in the output.
    EXAMPLE:
         GROUP     G/L ACCOUNT       TXT      Local currency  USD     Period     
           100              10                      aa                  5              5           12         
           100               11                     ab                   6             4            12        
    I have changed the coloumn positions in the field catalog accordingly and I have not written or changed any select queries from earlier output.
    now my problem is PERIOD field is not getting populated in the ALv,the data is visible in the IT_FINAL which I am passing to Reuse_alv_grid_display. the field catalog is also getting build properly.
    so plz suggest some changes so that I can move ahead.

    Hi
      I don't know what's the reason and now I have no environment to test it, but you can try other way:
      1. define your fieldcate one by one as the sequence of your output like
          GROUP         G/L ACCOUNT          TXT           Local currency         USD          Period
          In this situation, you needn't use component -- position of fieldcate structure. Pay attention to
          fieldname in upper case.
       2. If only doing step1 has no effect, then adjust your structure of internal table. Sequence your
           component of IT_FINAL as the output field like step1.
       If still no effect, please let me know.

  • IS Retail - Inventory - Retail price BWGV0 is not getting populated

    Hi ,
    We have activated IS retail industry specific indicator in SBIW. Fo some reason when I do RSA3 in '2LIS_03_BF' , all the stock movements are displayed but the retial price field BWGV0 is not getting populated. Do you guys have come across this situation ? Please let me know.
    Thanks
    Hareesh

    Some documents below might worth taking look..
    Process key logic for MM inventory can be found in OSS note 492828
    Logic for MM purchasing can be found in note 684465
    Activating the process key logic in R/3 for MM should be as simple as setting the correct industry in MCB_ (also found under SBIW), but if it doesn't work look at OSS note 353042. In the end haveto use trans BF11 to add an entry to a table, even though the plugin is 2003.1 on R/3 4.6C.
    352344
    492828 Determining the transaction key for 2LIS_03_BF + 2LIS_03_UM
    Hope it Helps
    Chetan
    @CP..
    Hope it Helps
    Chetan
    @CP..

  • Users details not getting populated in the portal tables..

    Hi,
    We have implemented single sign on (SSO) and we do not create users in the portal as user/pwd come from OID.
    Now becoz of this the portal tables are not getting populated.I require that all the users of the OID to be populated in the portal tables. How can I do it.I depserately require it.

    You can use the function wwsec_api.activate_portal_user to create the shadow records in the portal repository.
    Ref. : http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsec_api.html

  • Values not getting populated in the o/p

    Hi,
    I have a requirement,where in which I have to add MRP Controller(marc-dispo) and production scheduler(marc-fevor) fields in the selection screen and the same should be added in the o/p.These fields are not getting populated in the o/p,even if I give some values for these fields in the selection-screen.What would be the reason for this?
    Regards,
    Hema

    Dear Hema,
    Could you please tell me how many internal tables you are using to store the data for display.
    I observerd that you have lt_stock and lt_mat2 declared in the part of the program
    >DATA: lv_stock TYPE lty_stock.
    >DATA: ltmat2 TYPE TABLE OF lty_mat.
    you have displayed above, however you are also using ls_stock and lv_stock .
    >IF p_ztotal = ' '. "line
    >WRITE 18 ls_stock-matnr.
    >WRITE 38 lv_stock-strgr.
    >
    >ELSEIF ztotal = 'S'.                             "subtotal
        >WRITE: 15 ls_stock-nrmit.
        >WRITE 32 lv_stock-dispo.                    
        >WRITE 43 lv_stock-fevor.                      
      >ELSE.                                            "total
        >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
    >
      >ENDIF.
    Are those for displaying some other information?
    Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
    Best Regards,
    Rajesh.
    Please reward points if found helpful.

  • Amount not getting populated in me21n

    hi,
    amount is not getting populated for the condition type in the conditions tab of me21n.

    Hi
    Have you maintained Info record with conditons? Please write in detail.
    regards
    Srinivas

  • UWL : New tasks are not getting populated in the UWL

    Hi Experts,
        I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
    When  i am trying to configure the universal  worklist system ,its givin me a caution message as  <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
    Is this the problem for not populating the new tasks in the UWL?
    Please provide me  the solution..
    Thanks & Regards,
    Sateesh

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • WBS element is not getting populated in Excise entry in Project billing

    Hi SAP Guru's
    We have the case where we are doing the billing from manufacturing plant against Project. While billing WBS element is appearing in the invoice but in excise invoice entry same is not getting populated. This is affecting RR and P&L.
    Can you help me by providing the standard solution to meet this requirement or update if we can meet this requirement by some function module or through any exit.
    Thanks
    Surender Gupta

    Hi,
      In transaction" VTFA" and for your sales and billing type,select your item category and in the same scree,your pricing type should be "D".This will copy all the conditions from sales order item.
      Reward if this helps.
    Regards
    Karan

Maybe you are looking for