Default costcentre for gl codes

Hi,
my reauirement is default costcentre for gl codes. i was done configaration costcentre assign to gl codes in default assignment KA02, it is working on GL,AP,AR,AA but it is not work while creating the purchase requistion. can u give sugistion has any another configuration for purchase requistion mm side.
Moderator: Please, avoid asking basic questions

Hi Expert,
Check by configuring the below steps in T-Code: OBYC,
Select the Transaction - GBB and Enter Chart of Accounts and provide the GL Account(Post Automatically in GL Account Creation in T-Code: FS00)(which is assigned to default cost center) with respect to Valuation Class - Service and General Modifier - VBR: for internal goods issues (for example, for cost center)
Do the Purchase Requisition - ME51N and Provide the Account Assignment Category - K - Cost Center and Item Category - (Blank or D - Service) and Check whether it is picking the cost center automatically.
Check with the T-Code: OKB9, for Default Cost Center account assignment Settings
Regards,
GK
SAP

Similar Messages

Default layout for T code FAGLL03

Hi,
I have created a layout for T code FAGLL03. I want to make this layout as default layout only for me i.e user specific so that whenever I execute this T code, I get the report in that layout.
Is it possible to create user specific layout which wil be defaulted when that T code is executed.
Regards..

Hi:
Yes you can easily make default user layout that will be set as default for your own log in only. Please execute FAGLL03 ...once report is executed, set you layout as per your desire and in order to make it user default please go to Menu...Settings...save....there you will have to specif name starting with / and on the same screen you will find the user default check box . Just check and save it. Now exit from report now every time you will execute the report you will get the customized layout you saved.
Regards

Set Default value for transaction code F-36

Hi
I need to set default value to feild special G/L indicator in transaction code F-36 How can I do that. Please advice.
Regards
Kesharika

Just in case anyone would need to know. You can change the default values for transactions by using SE93.
Regards,

Need to use default package for JNI code?

Hi,
I don't have much experience with JNI code, so excuse me if I make a silly mistake.
I have a set of DLLs to interface with Microsoft native speech code ("Microsoft Sam") -- a GPL library called Quadmore. Quadmore has some sample Java code to work with the libraries, all of which they put in the default package (no package). If I move their code to a named package, it breaks. The Java code is able to load th libraries, but can't find any of the methods.
Looking at the source for their DLLs (though I don't speak C++), the method names are things like
JNIEXPORT jboolean JNICALL Java_QuadmoreTTS_SpeakDarling(JNIEnv *env,jobject obj,jstring strInput)As far as I understand, this implies that the QuadmoreTTS.class that calls the code must be in the default package, as otherwise the method name needs to be prepended with a package name.
If that's so, then there's no way I can use the code as-is, right? Naturally, the rest of my program is in named packages, and I can't import any class that is in the default package, right? I've tried placing all their code in a jar and adding the jar to my classpath, but I still can't import any of their classes as they are in the default package.
Is the only solution to re-compile all their C/C++ code to let it use packages? Am I being dumb and missing something? I'm pretty sure other people have used Quadmore before, so I can't believe that they've never had this problem before.
Any suggestions greatly appreciated!
Sam

C/C++ functions in JNI must conform to the prototypes produced by running the javah compiler against the class file with native methods in it. So if you move the class to another package, the prototypes change. If you doun't change the compiled C coudes to suit, you will get undefined method errors when you load the dll as the JVM won't be able to match the native methods to the methods in the dll (it will call WinLoadLibrary() and WinLoadProcAddress() or somesuch under Windows).

Entry missing in T169V table for Co. code

Hi Friends,
We made one new company code & did all the settings. When we are doing MIRO we got one error saying that Co. code is not exist in T169V table.
Table T169V is for Default Values, Invoice Verification.
We might have missed some customization, can any body tell where to do.
I can do it directly from tables also, but not advisable.
Regards
Sai Krishna

hi
goto
SM30 here u can get the customizations related to a perticular table
goto SM30 give table no and click on customizing then click on continue without project
here system wilkl give u all the customizations for this table
now if we take ur e.g. of T169v then u have to check for the entry of MM as the problem is occuring in MIRO
u have to go to SPRO>mm>LIV>Incoming Invoice>Maintain Default Values for Tax Codes
hope it clears
regards
KI

Default setting for user

Hi Mr Rajesha ,
I read ur ans. on thread of "BOM".
Can we give the default seting for T-code Co11n for particular user.
I want default exucution start date and time with exe. finish date and time in CO11n.
wat i have to do for this?
Please suggest.
thanx in advance!
Nilesh

Hi,
I am conf. the order thorugh co11n for manual activity declaration.
I am confirming my production from yesterday's morning 6:00 to todays morning 6:00
so user has to give there execution time and date for showing there production of that day in Zreport.
If it will come as a default user has no need to enter the time or day.
Is it possible?
Please suggest!
Thanks in advance!
Regards
Nilesh Ithape.

Tax codes - can you set up default value for rows and freight? HELP!

Hello - I have two issues with tax codes:
1. When adding a sales order if any of the rows do not have a value for "Tax Code" I will get an error "Row without tax was found".
- How can I get all rows on my sales orders, documents, etc to default to a specific tax code? Or will users ALWAYS have to enter the tax code?
2. When addring a sales order with Freight, if the order is added without adding a tax code to the freight I will get an error "Expense with tax was found"
- How can I get the tax code have a default value? We always use the same tax code, so it is redundant to have to enter this information.
Any suggestions?

Hi Jhon,
this is the simplest and best way to make a Tax Code default is Go to
Answer for Question 1
Administration -> Setup -> Financial -> Tax -> Tax Code Determination (Click on this)
in that screen you can set a default tax code for both sales as well as Purchase.
If you want to set Tax Code based on Vendors or Customers or Items separately then you can use the Key Fields.
Answer for Question 2
Once you enter the Tax Code in the freight i think it takes the Tax Code itself, I'm not so sure about this one though.
Hope this helps you out
regards,
Shreyas

Default Value for Order Type based on Company Code in ME21N

Hi,
Using ME21N, I want to make the PO type defaulted to a certain company code, say for instance Company code XYZ should have a PO type XYZ Purchase Order, ..company ABC should have a PO type ABC Purchase Order, and so on...I'm just puzzled how to implement it. I know that we can set a Default value for PO Headers in Personal Settings but its doesnt give the result I want coz it will only have one Default Value. What I wanted is when a certain company code is chosen, automatically, the corresponding PO type for that Company code will be displayed in the Order Type drop-down menu (so there's no need to choose on the drop down list what Order type) Is this possible in ABAP? Hope i made myself clear.
Thanks in Advance.

Use BADI IF IF_EX_ME_PROCESS_PO_CUST - method OPEN
View the interface documentation in transaction SE19 and you will see the method OPEN can be used :
2. Opening of a purchase order (OPEN method)
The system opens a new document to create, change or display a purchase order. With the OPEN method,
you can import your own data and prepare it for further processing.
This is available in 4.7 Enterprise but not sure how far back.....
hope this helps
Colin.

Does edge animate use html 5 by default for exporting code?

Does edge animate use html 5 by default for exporting code?

Does edge animate use html 5 by default for exporting code?

Default Layout for Z.transaction codes

hi,
we copied the FAGLL03 progamre and we made ZFAGLL03 becz there is a some reqirement from client.
we want set the defalut layout for this T.Code ZFAGLL03,
For this we save the layout and assign in FB00, then also when we excute the programe , it is not comeing the defalut layout .
what is process to set the defalut layout for Z T.Codes.
Regards,
Balu.K

Hi,
The default layout for the report cannot be done through FB00. You need to take help of an abaper. Similar to FAGLL03, you should have an icon to change and save layout for the report. If the icon is not present, an ABAPer can include it. Once the icon is available, you can change the layout and set it as default or user specific.
Hope this helps.
Thanksa and Regards,
Anit

How do you invoke the default browser for Unix/OSX

Does anyone know how to programmatically display the contents of a URL in the default browser for a Unix system? I found a javaworld article on doing this using Runtime.getRuntime().exec(cmd). The article gives the cmd string for invoking the default browser in Windows, and for invoking the Netscape browser in Unix.
This can easily be extended to invoke any known browser executable in a known path on a Unix system; but I'd like to invoke the default browser without knowing what or where it is. I'm specifically targetting Mac/OSX, but any Unix solution is worth trying.
Is there a Unix command for launching the default browser to display the contents of a given URL? Or is there an alternative approach, rather than invoking Runtime.exec()?
-Mark

After extensive google searching, I came across a partial solution. This code detects the default browser on a Mac, and provides an elegant solution for trying standard browsers in turn for other Unix systems. I tested it on WIndows XP and Mac OSX 3.9, and it detected the default browser each time. A suped up version of this tool is available as a SourceForge project. You can find it here:
http://sourceforge.net/projects/browserlaunch2/
Here's the simplified code:
// Bare Bones Browser Launch //
// Version 1.5 //
// December 10, 2005 //
// Supports: Mac OS X, GNU/Linux, Unix, Windows XP //
// Example Usage: //
// String url = "http://www.centerkey.com/"; //
// BareBonesBrowserLaunch.openURL(url); //
// Public Domain Software -- Free to Use as You Like //
import java.lang.reflect.Method;
import javax.swing.JOptionPane;
public class BareBonesBrowserLaunch {
 private static final String errMsg = "Error attempting to launch web browser";
 public static void openURL(String url) {
 String osName = System.getProperty("os.name");
 try {
 if (osName.startsWith("Mac OS")) {
 Class fileMgr = Class.forName("com.apple.eio.FileManager");
 Method openURL = fileMgr.getDeclaredMethod("openURL",
 new Class[] {String.class});
 openURL.invoke(null, new Object[] {url});
 else if (osName.startsWith("Windows"))
 Runtime.getRuntime().exec("rundll32 url.dll,FileProtocolHandler " + url);
 else { //assume Unix or Linux
 String[] browsers = {
 "firefox", "opera", "konqueror", "epiphany", "mozilla", "netscape" };
 String browser = null;
 for (int count = 0; count < browsers.length && browser == null; count++)
 if (Runtime.getRuntime().exec(
 new String[] {"which", browsers[count]}).waitFor() == 0)
 browser = browsers[count];
 if (browser == null)
 throw new Exception("Could not find web browser");
 else
 Runtime.getRuntime().exec(new String[] {browser, url});
 catch (Exception e) {
 JOptionPane.showMessageDialog(null, errMsg + ":\n" + e.getLocalizedMessage());
 }

Any suggestions for my code.

Hi,
I wrote this little piece of code to reduce some of the work I need to do when doing database access. I intend to use if with mySQL and mostly web based applications. It'll probably use it quite a bit, and since it's my first try at writing something like this I figured I'd post the code to see if anyone can find any problems. I've already tested it and it works, so I'm mostly interested in any feedback about performance issues.
I'd really like to know if there's any way I can get the number of rows in a result set before I start going through it. That way I could return the data in an Object[][] array (I'd assume it'd be a little faster to add values to than the ArrayList).
Here's the code...
* SQLGruntBean.java
* Created on November 22, 2002, 12:37 PM
package com.vacode.beans.sql;
import java.sql.*;
import java.util.*;
/** This bean is a generic class that can be used to access any type of SQL
* database. To use it with an application that accesses an SQL database
* do the following:
* 1. Create a new instance of SQLGruntBean.
* 2. Set the SQL connection source by calling setConnection(Connection).
* 3. Set the SQL query you wish to perform by calling setSqlQuery(String).
* Note: You may replace all values with question mark place holders
* as long as you also perform step 4.
* 4. (OPTIONAL) Set the values that are represented by question mark place
* holders by calling setSqlValues. This method requires an Object array as
* input.
* 5. (OPTIONAL) Set the maximum number of results to be retrieved by calling
* setMaxRows. If left unset it will default to 100. This method should not
* be used as a replacement for the LIMIT parameter in an SQL query. It is
* merely a backup in case an excessive number of results are returned
* erroneously.
* 6. Once all the necessary variables are set you may call either
* executeQuery or executeUpdate to perform the intended task.
* EXAMPLE
* 
* <code>
* SQLGruntBean sgb = new SQLGruntBean();
* Object[] values = new Object[1];
* ArrayList data = null;
* 
* sgb.setConnection(dataSource.getConnection);
* sgb.setSqlQuery("SELECT * FROM USERS WHERE firstName = ?");
* values[0] = "John";
* sgb.setSqlValues(values);
* data = sgb.executeQuery();
* </code>
* 
* The necessary try / catch blocks and error handling have been left out of
* this example, but will need to be implemented for production code.
* @author Vacode Web Systems
* @version 1.0
public class SQLGruntBean
 // Define global variables
 private Connection dbConnection = null;
 private String sqlQuery = null;
 private int maxRows = 100; // Default to 100 in case it is not set
 private Object[] sqlValues = null;
 // End global variables
 /** A write only method for defining the connection to an SQL
 * database
 public void setConnection(Connection sqlConnectionObject)
 this.dbConnection = sqlConnectionObject;
 /** A write only method for defining the SQL query that is to be
 * executed.*/
 public void setSqlQuery(String sqlQuery)
 this.sqlQuery = sqlQuery;
 /** Defines the maximum number of rows that are to be retrieved from the
 * result set. This is more of a back up than anything as the sql query
 * should contain a limit parameter if the query is going to return an
 * excessive number of results. */
 public void setMaxRows(int maximumRows)
 this.maxRows = maximumRows;
 /** A write only method for defining the dynamic values that are
 * to replace the question mark placeholders in the sql query.*/
 public void setSqlValues(Object[] values)
 this.sqlValues = values;
 /** Used to execute an sql query. The executed query is defined by calling
 * setSqlQuery prior to this method. The database connection to be used
 * is defined by calling setConnection prior to this method. */
 public ArrayList executeQuery() throws SQLException
 // Define the local variables that will be used within this method
 ArrayList data = null;
 // End local variables
 if(this.sqlValues!=null && this.sqlValues.length>0)
 /* A prepared statement needs to be executed because the
 * sqlQuery is going to contain ? placeholders rather than
 * actual values. It is necessary to replace these place
 * holders with their corresponding values.*/
 data = executePreparedQuery();
 else
 // A regular sql query needs to be executed.
 data = executeRegularQuery();
 return(data);
 /** Used to execute an sql update. The executed update is defined by calling
 * setSqlQuery prior to this method. The database connection to be used
 * is defined by calling setConnection prior to this method. */
 public int executeUpdate() throws SQLException
 // Define the local variables that will be used in this method
 int rowsAffected = -1;
 // Done local variables
 if(this.sqlValues!=null && this.sqlValues.length>0)
 /* A prepared update needs to be executed because the
 * sqlQuery is going to contain ? placeholders rather than
 * actual values. It is necessary to replace these place
 * holders with their corresponding values.*/
 rowsAffected = executePreparedUpdate();
 else
 // We just need to execute a regular sql query
 rowsAffected = executeRegularUpdate();
 return(rowsAffected);
 /** If a prepared statement is needed this method will be called by the
 * executeQuery method.*/
 private ArrayList executePreparedQuery() throws SQLException
 // Define the local variables that will be used within this method
 ResultSet rs = null;
 PreparedStatement pstmt = null;
 ArrayList data = null;
 // End local variables
 try
 pstmt = this.dbConnection.prepareStatement(this.sqlQuery);
 setSqlValues(pstmt, this.sqlValues);
 rs = pstmt.executeQuery();
 /* Closing the PreparedStatement is going to cause the
 * ResultSet to be inaccessible. Therefore it is necessary to
 * move the data that has just been aquired into an alternate
 * data storage object.*/
 data = processResult(rs);
 // Clean up all of the db resources we have opened
 rs.close();
 rs = null;
 pstmt.close();
 pstmt = null;
 this.dbConnection.close();
 this.dbConnection = null;
 /* No exceptions are caught. They should be dealt with by the
 * calling class. */
 finally
 /* If an exception was thrown during the execution of the
 * sql query there will still be open db resources. They need
 * to be closed. */
 if(rs!=null)
 try
 { rs.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 rs = null;
 if(pstmt!=null)
 try
 { pstmt.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 pstmt = null;
 if(this.dbConnection!=null)
 try
 { this.dbConnection.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 this.dbConnection = null;
 /* Regardless of what happens we need to return an array of Objects.
 * If the returning value is null it should be handled by the
 * calling class. */
 return(data);
 /** If a regular sql statement is required this method will be called
 * by the executeQuery method. */
 private ArrayList executeRegularQuery() throws SQLException
 // Define the local variables that will be used within this method
 ResultSet rs = null;
 Statement stmt = null;
 ArrayList data = null;
 // End local variables
 try
 stmt = this.dbConnection.createStatement();
 rs = stmt.executeQuery(this.sqlQuery);
 /* Closing the Statement is going to cause the ResultSet to be
 * inaccessible. Therefore it is necessary to move the data
 * that has just been aquired into an alternate data storage
 * object.*/
 data = processResult(rs);
 // Clean up all of the db resources we have opened
 rs.close();
 rs = null;
 stmt.close();
 stmt = null;
 this.dbConnection.close();
 this.dbConnection = null;
 /* No exceptions are caught. They should be dealt with by the
 * calling class. */
 finally
 /* If an exception was thrown during the execution of the
 * sql query there will still be open db resources. They need
 * to be closed. */
 if(rs!=null)
 try
 { rs.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 rs = null;
 if(stmt!=null)
 try
 { stmt.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 stmt = null;
 if(this.dbConnection!=null)
 try
 { this.dbConnection.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 this.dbConnection = null;
 return(data);
 /** If a prepared update is needed this method will be called by the
 * executeUpdate method.*/
 private int executePreparedUpdate() throws SQLException
 // Define the local variables that will be used within this method
 PreparedStatement pstmt = null;
 int rowsAffected = -1;
 // End local variables
 try
 pstmt = this.dbConnection.prepareStatement(this.sqlQuery);
 setSqlValues(pstmt, this.sqlValues);
 rowsAffected = pstmt.executeUpdate();
 pstmt.close();
 pstmt = null;
 this.dbConnection.close();
 this.dbConnection = null;
 /* No exceptions are caught. They should be dealt with by the
 * calling class. */
 finally
 /* If an exception was thrown during the execution of the
 * sql update there will still be open db resources. They need
 * to be closed. */
 if(pstmt!=null)
 try
 { pstmt.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 pstmt = null;
 if(this.dbConnection!=null)
 try
 { this.dbConnection.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 this.dbConnection = null;
 /* Regardless of what happens we need to return an array of Objects.
 * If the returning value is -1 it should be handled by the
 * calling class. */
 return(rowsAffected);
 /** If a regular sql statement is required this method will be called
 * by the executeQuery method. */
 private int executeRegularUpdate() throws SQLException
 // Define the local variables that will be used within this method
 ResultSet rs = null;
 Statement stmt = null;
 int rowsAffected = -1;
 // End local variables
 try
 stmt = this.dbConnection.createStatement();
 rowsAffected = stmt.executeUpdate(this.sqlQuery);
 // Clean up all of the db resources we have opened
 stmt.close();
 stmt = null;
 this.dbConnection.close();
 this.dbConnection = null;
 /* No exceptions are caught. They should be dealt with by the
 * calling class. */
 finally
 /* If an exception was thrown during the execution of the
 * sql update there will still be open db resources. They need
 * to be closed. */
 if(stmt!=null)
 try
 { stmt.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 stmt = null;
 if(this.dbConnection!=null)
 try
 { this.dbConnection.close(); } catch(SQLException sqle)
 { } // EXCEPTION IGNORED
 this.dbConnection = null;
 return(rowsAffected);
 /** used to iterate through the sql values and add them to the
 * prepared statement object. */
 private void setSqlValues(PreparedStatement ps, Object[] values) throws SQLException
 for(int i=0;i<this.sqlValues.length;i++)
 Object o = this.sqlValues;
 /* SQL starts counting at 1 not 0, so this loop needs to be
 * incremented by 1 for the setObject method to interpret it
 * correctly. */
 ps.setObject(i+1, values[i]);
/** Used to copy a result set into a persistent object so that it can
* be used even once the connection to the database has been closed. */
private ArrayList processResult(ResultSet rs) throws SQLException
 ArrayList data = new ArrayList();
 ResultSetMetaData rsmd = rs.getMetaData();
 int colCount = rsmd.getColumnCount();
 while(rs.next())
 Object[] currentRow = new Object[colCount];
 for(int i=0;i<colCount;i++)
 currentRow[i] = rs.getObject(i+1); //SQL starts at 1 not 0
 data.add(currentRow);
 return(data);
Thanks for the input,
Ryan

I think I have an idea of what you mean. I just want to make sure before I write everything though. I could implement your idea by doing the following right?
I haven't tried any of this, so if there's minor (syntax) errors just ignore them. I'll fix them later.
1. Create the following Interface.
package com.vacode.beans.sql;
public interface GruntBeanProccessingModule
 public Object get(Object[] properties);
}2. Force the subclasses to implement the above interface
public class EmployeeProcessor implements GruntBeanProcessingModule
 public Object get(Object[] properties)
 //make sure the input array is the right length (+ other validation, etc.)
 //create a new EmployeeBean
 //set all the EmployeeBean properties based on the input Object[]
 //return the EmployeeBean
}3. Make the following additions to my SQLGruntBean class
private requestedClassType = null;
public void setRequestedClassType(Object o) // o must be an instance of the requested class
 this.requestedClassType = o;
//if requestedClassType isn't null then create the ArrayList like this
while(rs.next())
 Object[] currentRow = new Object[colCount];
 for(int i=0;i<colCount;i++)
 currentRow[i] = rs.getObject(i+1); //SQL starts at 1 not 0
 Class requestedClass = Class.forName(requestedClassType.getClass().getName());
 GruntBeanProcessingModule gbpm = requestedClass.newInstance();
 Object convertedData = gbpm.get(currentRow);
 data.add(convertedData);
 }Of course I'll have to handle any possible exceptions (requestedClassType isn't an instance of GruntBeanProcessingModule, etc.). I also notice the forum replaced some of my [] with <> (I've seen it before though, so you probably already know about it).
Did I get it right or am I out to lunch :-)
Thank you very much for the feedback,
Ryan

How to set a default value for a page item

I am working with a facility table that has name and address information. The user can add contact name information on a separate page. Since the address for the facility and contact is usually the same, I want to add a default value for the contact address. The facility page is on 201 and the link to add a new contact row is on page 202. I showed in the default value :P201_street for the contact's address. But, when I run the page, the contact address field shows the :P201_street, not the actual facility address. What am I leaving out? Must be something obvious?!
Thanks very much.
Judy

In the default value, I showed: v('P201_STREET1') with the default value type of: PL/SQL Expression and received the following oracle error ==> Item default is not a PL/SQL expression. Use &ITEM syntax. The v('ITEM') syntax is not valid for item defaults. So I changed it to: &P201_STREET1 and got another oracle error , ERR-9132 error in PLSQL expression for item default code, item=P202_STREET1.
Any more suggestions? Thx.
Judy

Is it possible to create a new tab in 'Default settings for items' option?

Hi everybody
I am Raghu working in EBP2.0 & I have come across a difficlty and that is of creating a new tab and also the fields 'GL a/c', 'cost centre' or 'internal order' in this new tab.
First of all please let me know whether is it possible to create a new tab for these fields.
The purpose of this new tab is to default the cost centre and GL account with reference to shopping cart.
As per current scenario, user has to enter the cost centre & the GL code as many times as the number of items in a shopping cart. I mean, if you have 10 items in your shopping cart then 10 times user has to input the cost centre & GL account. To avoid this we are required to add new tab so that per shopping cart we can enter the GL account & cost centre only once.
Your immediate response would be very much apprecited.
Regards
Raghu

hi Ram & Sreenivas
Thanks for your immediate response.
Ram, we can default GL a/c & cost centre in org structure since client wants to us to keep the option of entering these for every shopping cart.
Sreenivas, I checked the 'copy to clipboard' option & its not there in EBP2 and I feel what you meant as cost centre tab is account assignment tab.
Let me explain you more clearly about this requirement.
Current Scenario
1.Say a user has added 5 items to his SC.
2.User has to enter cost centre & GL code 5 times & then he can order
Required scenrio
1.Say a user has added 5 items to his SC.
2.As per the proposed functionality, user will click on 'Default settings for items' button. Three tabs will appear-->Basic data, Internal note & Delivery Address.
We have to provide a new tab here where in user will default his GL & cost centre for this shopping cart & then order. This will help user to avoid entering GL & cost centre 5 times.
For some reasons our client is not interested in defaulting this data.
Please help in this regard if time permits.
Thanks
Raghu

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

Default costcentre for gl codes

Similar Messages

Maybe you are looking for