Tax codes - can you set up default value for rows and freight? HELP!

Hello - I have two issues with tax codes:
1. When adding a sales order if any of the rows do not have a value for "Tax Code" I will get an error "Row without tax was found".
- How can I get all rows on my sales orders, documents, etc to default to a specific tax code? Or will users ALWAYS have to enter the tax code?
2. When addring a sales order with Freight, if the order is added without adding a tax code to the freight I will get an error "Expense with tax was found"
- How can I get the tax code have a default value? We always use the same tax code, so it is redundant to have to enter this information.
Any suggestions?

Hi Jhon,
this is the simplest and best way to make a Tax Code default is Go to
Answer for Question 1
Administration -> Setup -> Financial -> Tax -> Tax Code Determination (Click on this)
in that screen you can set a default tax code for both sales as well as Purchase.
If you want to set Tax Code based on Vendors or Customers or Items separately then you can use the Key Fields.
Answer for Question 2
Once you enter the Tax Code in the freight i think it takes the Tax Code itself, I'm not so sure about this one though.
Hope this helps you out
regards,
Shreyas

Similar Messages

Can we set a default value for the container variable in BPM?

Can we set a default value for the container variable.?
Suppose if i have a loop step and i have given a container variable i=5 as end condition.What value will it take during its first execution?Can we set the value for container before a recieve step?

Hi
Define Container Variable of Type integer and Category Simple Type .Use Condtion in Loop.
In Container Operation Step Assign value and Use Expression to
Increase or Decrease Valus according to your operation.
look Pattern 4 in this blog to understand Container Operation
/people/sharathchandra.girmaji/blog/2008/09/11/bpm-with-patterns-explained-part-1

Can you set a default value using Data Mover Scripts?

Hi,
We're going through a upgrade of PS Fin 8.9 -> 9.1. We've found some existing tables with new columns that are marked as NOT NULL so we're having trouble migrating the data using DMS.
Is there a way to Export the data from 8.9 and when importing into 9.1, set a default value for the new column using DMS?
A specific example would be the PS_SOURCE_TBL where EXCHANGE_RATE_OPTN is new and NOT NULL.
Thanks for any assistance.

What you could do is first rename the record to be imported
IMPORT SOURCE_TBL AS PS_SOURCE_TBL_ORG;
Then write a insert/select script from PS_SOURCE_TBL_ORG to PS_SOURCE_TBL defaulting column EXCHANGE_RATE_OPTN
Insert into PS_SOURCE_TBL (COLUMN,COLUMN,COLUMN,COLUMN, EXCHANGE_RATE_OPTN)
select PS_SOURCE_TBL_ORG (COLUMN,COLUMN,COLUMN,COLUMN, 'defaultvalue');
And then drop table PS_SOURCE_TBL_ORG to clean up your database.

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set the Default values for Info Objects in Data Selection of InfoPac

Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CV

Hi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha

Can I set the default locale for jvm

Hi,
Can I set the default locale for jvm?
How to do it?
Pan

My windows default locale is chinese .I have thought of your opinion. But in
windows nt , if I change the locale , all the environment will be
destroyed(just like reinstall it , it's difficult for me) . So , Is there
any other approach?
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Did you try to change the locale in the Windows control panel?
(Control panel -> Regional Options -> Your locale)
Pan YangBin <[email protected]> wrote:
I have tried changing this system property and other properties such
as -Duser.language=en -Dfile.encoding=Cp1252 , but all these properties
did
not changed, you can get this infomation from the log file .Maybe these
system properties are readonly.
Thanks very much.
Pan
Chris Halstead <[email protected]> wrote in message
news:[email protected]...
Try adding -Duser.region=US to the java command line used to start
WebLogic...
-chris
"Pan YangBin" <[email protected]> wrote in message
news:[email protected]...
Hi,
The problem exists in my project still exist.That is it.
When I did not set weblogic.jsp.encoding to GB2312 in my web
application(web.xml), and when the jsp file contain's chinese , the
output
will be error(error chinese) .And when I did not set it , the output
is
correct, but when I use request.getParameter("SomeFormElement")(theelement
inputed chinese), the return value is error(still chinese error).And
when
I
am in windows nt english version and do not set this property, all
these
two
problems dispear. And I try to compare the java files those were
generated
by weblogic from the jsp file , there is only two additional clause
in
the
java file. That's it:
((weblogic.servlet.jsp.JspWriterImpl)out).setEncoding("GB2312");
response.setHeader("Content-Type", "text/html; charset=GB2312");
(the web.xml has <context-param>
<param-name>weblogic.jsp.encoding</param-name>
<param-value>GB2312</param-value>
</context-param> to be set
So, I think maybe it works well if I change the default locale toenglish.
And unfortunately, your method is also failed.(I have to use weblogic
in
chinese environment)
Would you please help me to solve this problem?
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Try java ... -Duser.language=en ...
or mode con cp select=437 in the command prompt before running
weblogic.
Pan YangBin <[email protected]> wrote:
I'm using weblogic server 5.1 sp6 in chinese environment, and I
want
weblogic compile my jsp with en_us locale . So I can't use
Locale.setDefault(new Locale(...)) to set the default locale ,butI
really
want someway configure.
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Locale.setDefault(new Locale(...)) ?
Pan YangBin <[email protected]> wrote:
Hi,
Can I set the default locale for jvm?
How to do it?
PanDimitri
Dimitri
Dimitri

How to set the default values for print options

Hi all,
We can set the default value for print options, just like Logical destination、numbers of messages、print immediately and so on, so where we should to maintain these default?

Hi Sandy,
This can be done by an abaper by making changes in the driver program. The Driver program feeds all the data which u have mentioned for printing.
if the driver program is standard. copy to an z type and make modification on printer settings on the driver program code.
this will surely solve the issue.
Regards
Gunaseelan

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

Set a default value for a radio button populated with a List of value

Hi,
I am using jdeveloper 11.1.1.3.0. I need to set a default value for a radio button populated with a List of value(Yes/No). Here's the selectonechoice code.
<af:selectOneRadio value="#{bindings.Code.inputValue}"
label="#{bindings.Code.label}"
required="#{bindings.Code.hints.mandatory}"
shortDesc="#{bindings.Code.hints.tooltip}"
id="sor1" autoSubmit="true"
valuePassThru="true" layout="horizontal">
<f:selectItems value="#{bindings.Code.items}" id="si1"/>
</af:selectOneRadio>
I want to have the selectonechoice set to No by default. In the previous versions, I set the default value in the base attribute VO. But it is not working in the new version.
Thanks

Hi,
this should work in JDeveloper 11.1.1.3 the same as in 11.1.1.2. If it doesn't then it is better to file a bug than to work around it
Frank

Setting up default value for POV in Financial Reporting Studio

hello
We need to Set up default value for POV in Financial Reporting Studio. For example, we need period to pick up Sep as default value when we run the report.
Is there any way we could do this???
Regards
Neha

Hi Neha,
Yes, there is a way to setup of your grid POV. Take a look at this: http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/127.html
Cheers,
Mehmet
p.s. Please mark the answers helpful or correct, if they've helped you or answered your question. Thanks!

Can i set a default transition for final cut pro x

Can I set a default transition for Final Cut Pro X? I'm doing a multicamera edit and would like all edit points to have a cross dissolve transisiton. Can I make this happen by default?
Thanks!

Cross dissolve is the default transition. It's applied with Cmd-T.

Can you set up multiple profiles for I pad

Can you set up multiple profiles for I pad

Not sure what you want to do.
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
 Cheers, Tom

How can I set a default file for JFileChooser

Hi. I am developing a p2p chat application and I have to unrelated questions.
1. How can I set a default file name for JFileChooser, to save a completly new file?
2. I have a JTextArea that I append recieved messages. But when a message is appended, the whole desktop screen refreshes. How can I prevent that?
Hope I was clear. Thanks in advance.

Thank you for the first answer, it solved my problem. Here is the code for 2nd question, I've trimmed it a lot, hope I didn't cut off any critical code
public class ConversationWindow extends JFrame implements KeyListener,MessageArrivedListener,ActionListener,IOnlineUsrComp{
     private TextArea incomingArea;
     private Conversation conversation;
     private JTextField outgoingField;
     private JScrollPane incomingTextScroller;
     private String userName;
     private JButton inviteButton;
     private JButton sendFileButton;
     private JFileChooser fileChooser;
     private FontMetrics fontMetrics;
     private HashMap<String, String> onlineUserMap;
     public void MessageArrived(MessageArrivedEvent e) {
          showMessage(e.getArrivedMessage());
     public ConversationWindow(Conversation conversation)
          this.conversation=conversation;
          userName=User.getInstance().getUserName();
          sendFileButton=new JButton("Dosya G�nder");
          sendFileButton.addActionListener(this);
          inviteButton=new JButton("Davet et");
          inviteButton.addActionListener(this);
          incomingArea=new TextArea();
          incomingArea.setEditable(false);
          incomingArea.setFont(new Font("Verdana",Font.PLAIN,12));
          fontMetrics =incomingArea.getFontMetrics(incomingArea.getFont());
          incomingArea.setPreferredSize(new Dimension(300,300));
          outgoingField=new JTextField();
          outgoingField.addKeyListener(this);
          incomingTextScroller=new JScrollPane(incomingArea);
          JPanel panel=new JPanel();
          panel.setLayout(new BoxLayout(panel,BoxLayout.PAGE_AXIS));
          panel.add(inviteButton);
          panel.add(sendFileButton);
          panel.add(incomingTextScroller);
          panel.add(outgoingField);
          add(panel);
          pack();
          setTitle("Kişiler:");
          setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
          setLocationRelativeTo(null);
          addWindowListener(new CloseAdapter());
     //Sends the message to other end
     public void keyPressed(KeyEvent e) {
          if(e.getKeyCode()==KeyEvent.VK_ENTER && e.getSource()==outgoingField)
               String message=outgoingField.getText();
               if(message.equals("")) return;
               showMessage(userName+": "+message);
               conversation.sendMessages(userName+": "+message);
               outgoingField.setText("");
     //Displays the recieved message
     public void showMessage(String message)
          if(fontMetrics.stringWidth(message)>incomingArea.getWidth())
               int mid=message.length()/2;
               StringBuilder sbld=new StringBuilder(message);
               for(;mid<message.length();mid++)
                    if(message.charAt(mid)==' ')
                         sbld.setCharAt(mid, '\n');
                         message=sbld.toString();
                         break;
          incomingArea.append("\n"+message);
}

Set of default values for Select-Options

Hi Gurus,
I have a requirement where I need to set default values for select options
ex: SELECT-OPTIONS: S_MTART FOR MARA-MTART
default values must be ERSA - HIBE- FHMI - DIEN - GEST
Please tell me how to do it.
Effective replies will be rewarded with full points
Karthik

Hi,
For each SELECT-OPTION, you can only specify one DEFAULT.
You must specify the default value g in its internal format, e.g. "SELECT-OPTIONS DATE FOR SY-DATUM DEFAULT '19931224'", not "... DEFAULT '24.12.1993'".
The default value g should normally be a literal because, at runtime when you use SUBMIT, it is transferred to the selection options table sel so early that no value can be assigned to the field g. System fields like SY-DATUM are an exception here because the system usually assigns values to them as soon as the report processing starts.
When you use user-defined selection screens in your programs that you do not call using SUBMIT, the DEFAULT value is transfered when the selection screen is first called. In this case, therefore, you can use other fields g.
regards,
sowjanya
Message was edited by: sowjanya suggula

Tax codes - can you set up default value for rows and freight? HELP!

Similar Messages

Maybe you are looking for