Default enhancement set

Hi All .
I know that enhancement sets are created through sm34 and then assigned to a particular client via sm30 .
Now ,how to go about setting a particular enhacement set as default whenever any component is enhanced , so that all the enhancements across many components are captured in a particular enhancement set ?
rgrds
Piyush

Hi,
I am sorry if I am repeating what you have already done but steps are as Below:-
1-Create Enhancement Set - SM34 ,
View Cluster-BSPWDVC_CMP_EXT( Give Details),which will be used in the component workbench and will be filled automatically during enhancement.Also whatever enhancements you do will be reflecting in Enhancement Defination
2-Assign The Enahncement Set to Client in SM 30
View- BSPWDV_EHSET_ASG
Regards
Arup

Similar Messages

Can we change the enhancement set for a component

Dear All
I have a situation where in we need to change assign a different enhancement set to all our components which got enhanced.
We can only have 1 enhancement set active for a client.
Now in our case
Say for client 300 we were using Enhancement Set E1.
Our requirement is to create one more enhancment set E2 and assign it to client C1. We can do that.
Do we we have a mechanism to move all development already done using E1 to E2?
Please Help.
Thanks
Gaurav Sahai

Hi Gaurav,
We create enhancement set in SM30, then assign it to client also there.
After that, when we go to BSP_WD_CMPWB - by default we see the enhancement set assigned to the client. Now there are 2 things:
1. to use different enhancement set for different users - you can implement badi component_loading to load different enhancement set depending on business requirement by writing code:
RV_RESULT = <name of ENHANCEMENT_SET. >
there is a default implementation in the system for reference.
2. all enhanced views can be seen in transaction SM34, give name of view cluster as BSPWDVC_CMP_EXT
Select your enhancement set -> go to Enhancement Definitions (here you see components enhanced) -> select any -> go to Controller Subsitutes (here you see all view enhanced).
You can try copying all these entries into another enhancement set. I am not sure if it will allow same entries in two different sets (if it doesn't you will have to delete from the other).
I hope that resolves your query.
Thanks,
Rohit

How to determine active enhancement set

Hi there,
I have enhanced a SAP component and I have added a customer specific button. In the event handler of this button I would like to know which enhancement set is currently active.
Is it possible to determine this information somehow?
Thanks,
Karsten

Hello Karsten
If there are no custom implementations of BADI COMPONENT_LOADING, then it will be as indicated by Naresh in the previous reply, a query to table BSPWD_EHSET_ASGN with the client in the where clause should do. This is precisely what is done in the default implementation of BADI COMPONENT_LOADING, in method GET_ACTIVE_ENHANCEMENT_SET.
If there is a custom implementation of BADI COMPONENT_LOADING then each user can have his own enhancement set assigned. Method GET_ACTIVE_ENHANCEMENT_SET of the custom implementation of the BADI would return the active enhancement set.
Best Regards
Luis Rivera

Modifying the Default Result Set on the Results Tab of the SQLWorksheet

I have found the previous posts indicating that the default result set size is 50, that it is not currently able to be modified and (good news) that an enhancement will be coming to correct this.
I thought I would give my two cents on how this option might be configured:
Either in the 'View-Options-(output options)' or the 'Tools-Preferences-Environment' areas, have two options. The first would be something like "Max Rows to Display in Results Window" and the second would be sometihng like "Max Rows to Load when end of Current display is reached."
The first option is certainly most essential, but the latter option I have to explain a little. Say you set your max rows to display to 500. You scroll (drag bar, arrow down, etc) to record 501. At this point, the setting on the "Max Rows to Load When End of Current Display is Reached" option comes into play. This setting will then be read to determine how many rows are to be loaded each time the user gets to the current end of display. The second option adds some flexility to how data rows will be displayed after the initial data rows are loaded.
You could just default the number of rows added to the display to the setting set in the "Max Rows to Display in Results Window" setting, although I would say that this would be less flexible. Whatever you do, don't follow the Toad example of loading ALL records when dragging the vertical bar to the bottom of the display grid.
Thank You for your time.
Scott Lips

I like the idea.. please post this on the sister website so that people can vote on it.
http://sqldeveloper.oracle.com/

How can we copy an enhancement set to a different Business Role?

Experts,
How can we copy an enhancement set to a different Business Role?
Currently we have an enhancement to a Business Role "SALES PRO." How can i make the same enhancement set active for a different Business Role? ie. MARKETINGPRO.
Thanks,

Hi,
it is recommended to have only one active enhancement set per client.
For your businessrole you could use the role configuration key.
In our system each businessrole has it´s own role configuration key. But we implemented also a BADI if no configuration is found use our company default role configuration key and only if there is also no configuration use SAP .
Kind regards
Manfred

Oracle Inventory: How to change default category set of items

Hi,
We have a requirement where we need to change the default category set of functional area inventory in oracle as we are importing new items into inventory whihc need to be assigned to a new default category set.There is an existing default categpory set for this area.
As far as i understand once a default category has been set up and an item has been defined, the only way to change the default category set for a given functional area is to update all items with the new default category set before updating the default category set/functional area relationship.
How exactly do we update the defaul category set for an existing item and change it to a new one. Since we have close to 15K items what is the best way to do this.Is there ay API available?
Thanks in Advance
AM

Hi Helios,
Thanks a lot for your response
The fix given in this document is to allign all the exisitng items to a category set (purchasing in this case). This is exactly what my doubt is. How to assign 15k items to a different category set. If i am able to allign these items i can change the default category of the functional area.
Thnaks
AM
PS: i am using 11.5.10.2

List View Web Part - Default Chrome Setting

In our environment, the "Default" chrome setting does not display the title or the border on our list view pages. We have tried Oslo and Seattle master pages and neither displays this to the end user. We do see the title in Edit mode, but
not once the page is saved. If we switch it to Title Only, it does display.
Is this the correct behavior? If so, is there an easy way to change the chrome setting to "Title Only" for the list view web parts in one particular web application when a view is created?

That is the default behavior. normally, the listview web part is on a page where the title of the library is displayed on the page, which would make it redundant to display it in the web part only. I don't know any way to change this behavior
by default when creating a new view.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Default User setting at Dashboard level

Hi SAP Users,
i want default dashboard user setting & all users will only see my setting
Is it possible to have default user setting for dashboard?
Regards
Ravindra

In the administration mode, you can update the current configuration settings/layout (right-click on the UI group you want to update, can be a dashboard, a field...) and save them as the default (standard) settings.
Please try with the administration url I provided you with, and let me know if it helps.
http://server:port/irj/portal?sap/bc/webdynpro/sap/cprojects?sap-config-mode='X'
Matthias

Error while transporting Enhancement set to QA

Hello All,
We are implementing AAK for a product. We have imported all the Transport Requests from DEV to QA. We have created a Change Piece List Package and did object check list. We got errors regarding table contents of Enhancment set like 'Table Contents(Cross-client, delivery class C) : No import'. Contents in the table are BSPWD_EHSET_DEF, BSPWD_CMP_C_REPL, BSPWD_COMP_EXT, BSPWD_EHSET_ASGN.
Please suggest me a solution.

YOu can try transporting the entries using generic keys.

Preview Default Print Setting "Fit to Page" Problem

Preview.app in Snow Leopard has removed the option to print without scaling, and recreating this behaviour with the remaining options is quite complex and requires 4 extra steps.
Steps to Reproduce:
1. Open a document in Preview.app, such as a PDF, of a known paper size.
2. Select 'File' > 'Print…'
3. Change the paper size to one where the default scale value with the default 'Scale to Fit:' 'Print Entire Image' is not 100%. This step is often unnecessary, as many documents will require reduction to include margins, even if the paper sizes match.
4. Select 'Scale:'
5. Select the scale % value.
6. Delete the scale value.
7. Input '100' in the scale value box using the keyboard.
8. Press tab to avoid radar #7256827.
9. Click 'Print'
Expected Results:
Click on a single option to print at 100%, if by chance that wasn't the default option. This would have been one step.
Actual Results:
Does what it says. Steps 4 through 8 are necessary to print at 100% in most cases.
Regression:
This behaviour was as expected in OS X 10.5.x and previous versions, or we wouldn't be having this discussion.
Notes:
Printing at 100% is the only scaling that is common enough to warrant a button to make it an easy one to get to. Preview.app itself even has an 'Actual Size' toolbar button, but has removed this function for printing.
Graphic designers (and other professionals) or specific applications (such as printing on pre-cut or pre-printed paper, labels, or DVDs) can commonly require printing at 100%, and using PDF to distribute documents makes Preview.app the most logical choice for many printing jobs.
Having something other than 100% as a default can cause expensive media to be ruined by a mis-scaled printout, unless these 4 (+1) steps are followed every time.
Most other apps, including Safari, Mail.app and TextEdit default to no scaling, making Preview.app an exception.
I am an architect and this is really annoying!
Does anyone know a workaround?

Sorry no workaround as yet...
I too am now sick of the amount of expensive paper I have wasted due to the Preview app default print setting of 'Scale to fit'.
- No option to print at 100%, you have to manually input this information.
- No way to change this default in preferences, you can change the opening viewing size of a doc to 100% though.
- Doesn't remember the previous settings if you decide to reopen the doc and print another copy.
I also found that if I attempted to print an A4 doc with bleed and crop marks, it would set the default paper size to A4 and the annoying scale to fit would be set to 83%. If I then changed the scale by typing in 100% but don't hit enter for fear of the print starting and then simply use the drop down to change the paper to A3 and then change the orientation and then hit enter it ignores that you have changed the scale and prints your doc at 83% on A3 - Brilliant!
It's a shame to say that I will be going back to acrobat for pdfs!
If you can't put a 100% scale radio button on the print dialogue box either allow people to change the default in prefs or even better allow the presets to control paper size and scale of printing!

Setting up LDAP for authentication to portal:default property set named "ldap

Hi
I am trying to implement the LDAP authentication to WebLogic Portal .Iam went
thru the docmentation ( http://edocs.bea.com/wlp/docs40/p13ndev/users.htm#1131824).It
mentions using the default property set named "ldap" and deploying ldapprofile.jar.My
quenstion is:
-Is there a way to look into the property using EBCC
- Apart from deploying,configuring the ldapprofile.jar,do I have to do any additional
steps in order to make my portal(say,stockportal) authenticate users from LDAP?
-If a create my own portal,should I create a similar "ldap" property set?If so,how.
Any suggestions/help is appreciated.Thanks
- Mike

Thanks Dave.
"David Anderson" <[email protected]> wrote:
You should be able to view the property set for LDAP through the EBCC
if you
have the propertysetws.jar installed in your Portal domain. This provides
the ability for the EBCC to retrieve property set information from your
server.
Dave
"mike" <[email protected]> wrote in message
news:[email protected]...
Hi Adrian
Thank you for the pointers.Much appreciate it.However,one questionstill
persists.
What is the significance of the property set "ldap" mentioned in the
document(http://edocs.bea.com/wlp/docs40/p13ndev/users.htm#1131824).Where
does this property set feature vis-a-vis setting up LDAP securityrealm;does it
mater prior to/after the setting up as mentioned in the document pointeryou just
gave .
Is it sufficinet that i follow the procedure to set up the LDAP oris
there more
to post setting,like creating a property set (similar to "ldap" orcloning
it)
apaprt frpom deploying ldapprofile.jar.
Thanks.
- Mike
"Adrian Fletcher" <[email protected]> wrote:
Mike,
The documentation that covers LDAP authentication is listed under
Weblogic
Server rather than Weblogic Portal.
See Configuring the LDAP Security Realm in Managing Security
(http://e-docs.bea.com/wls/docs61////adminguide/cnfgsec.html#1071872)
Also take a look at the FAQ - Why can't I boot WebLogic Server whenusing
the LDAP Security Realm?
(http://e-docs.bea.com/wls/docs61//faq/security.html#25833)
Hope this helps,
Sincerely,
Adrian.
Adrian Fletcher.
Senior Software Engineer,
BEA Systems, Inc.
Boulder, CO.
email: [email protected]
"mike" <[email protected]> wrote in message
news:[email protected]...
Hi
I am trying to implement the LDAP authentication to WebLogic Portal.Iam
went
thru the docmentation
http://edocs.bea.com/wlp/docs40/p13ndev/users.htm#1131824).It
mentions using the default property set named "ldap" and deployingldapprofile.jar.My
quenstion is:
-Is there a way to look into the property using EBCC
- Apart from deploying,configuring the ldapprofile.jar,do I have
to
do any
additional
steps in order to make my portal(say,stockportal) authenticate usersfrom
LDAP?
-If a create my own portal,should I create a similar "ldap" propertyset?If so,how.
Any suggestions/help is appreciated.Thanks
- Mike

UTF8 as system default character set

Hi,
I'm new to OSX and I moved to a new company few days ago. We work with Tiger workstations and servers, several Linux internet servers and Windows Laptops.
One of the problems I have is to find a way to set UTF8 as the default character set for the system, not just user level preferences. That would solve many of my other problems.
There is probably an easy way to do that?!!
Any tip or trick would be greatly appreciated.
Thanks.

One of the problems I have is to find a way to set UTF8 as the default character set for the system, not just user level preferences. That would solve many of my other problems.
What are your problems exactly? If you give some specifics, someone can probably help.
Generally speaking Unicode UTF-8 is what OS X uses by default for a lot of things. The exception would be the file system, which uses UTF-16 NFD. There is certainly no way to change that.

System wide default character set

Hi,
I moved to a new company few days ago where we use Tiger workstations and servers.
I've been trying to figure a way to set UTF8 as the default character set for a whole system, not just a user preference.
I suppose there is a way to do that, but I'm afraid I won't have more time to find it.
Any help is welcome.
thx fred

I've been trying to figure a way to set UTF8 as the default character set for a whole system, not just a user preference.
If you could explain exactly why you think you need to do that, someone might be able to help.
Generally speaking Unicode UTF-8 is what OS X uses by default for a lot of things. The exception would be the file system, which uses UTF-16 NFD. There is no way to change that.

BUG: Default reminder set in Live cal. even when specifying Reminder=None in Outlook 2013

Since switching from Outlook 2010 to 2013 I have been getting calendar apointment alerts on the Windows Phone and iPad linked to my Live account, even though I am creating appointments specifying no reminder.
After a lot of investigation, I can see exactly what the problem is. I have created many test appointments and exported from Outlook and examined the resulting file.
If I have asked for a reminder, "Reminder on/off" is True and specified reminder date/time is present.
If I have asked for NO reminder, "Reminder on/off" is False *but* reminder date/time is present based on the Default reminder setting. This occurs even when the tickbox for Default reminder is unticked (and there is no default setting
for None apart from unticking).
When that appointment reaches my Live calendar, it appears with a reminder, based on the date/time that Outlook 2013 has supplied, even though "Reminder on/off" is False.
Is this a bug in Outlook, which surely shouldn't be putting default reminder date/time into the data when Reminder is set to None.
Or is it a bug in Live, in that is should disregard any reminder date/time if "Reminder on/off" is False?
The reminder does not pop up in Outlook, although it does on sync'ed devices.

Hi Mark,
Thank you for your update.
Based on my long-time research, seems it’s the default behavior of Windows phone. The reminder is set to 15 minutes by default and it’s not possible to change the setting by default. See:
http://answers.microsoft.com/en-us/winphone/forum/wp7-wppeople/i-dont-want-my-new-calendar-entries-to-have-a/48c38029-456d-4288-83d4-06c1047caa25
http://answers.microsoft.com/en-us/winphone/forum/wp8-wpemail/how-to-set-calendar-default-to-no-reminders-on/f6058959-0d01-4daa-989a-64bb2642549e
http://answers.microsoft.com/en-us/winphone/forum/wp8-wpemail/reminders-being-added-to-appointments/3b70b20b-6b4e-4414-8e56-ac99b1629b6d
Would you please contact your Windows phone support to confirm this issue? Please feel free to post back if you need further support with Outlook 2013.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Exchange 2010 Room Calendar Permissions are too permissive when Default is set to None.

Help! Room Calendar permissions are too permissive when Default is set to None.
We are a brand new Exchange 2010 shop, and have setup several conference rooms. Many of them are restricted to specific groups to book via In-Policy Requests using Resource Booking Attendant. The Room Calendar permissions for most
rooms shows only two options for the Default access: None and Full Details. Default is set to None, yet if someone opens the room calendar in Outlook (& they are not part of the In-Policy restrictions) they are able to see the full meeting details
(even open the meeting for full details). How is this possible when by default they should not have any access as it is set to None? Some rooms would not be a problem for clients to see the details, but some rooms like Executive rooms need to be
locked down so that others cannot see the room details - None.
I also found this, although it did not make a difference. If I create an Outlook profile for the room and login as the room calendar in Outlook, go to File, Options, Calendar, Resource Scheduling, Set Permissions I get different default options:
None, "Free/Busy time", "Free/Busy time, subject, location" and Full Details. Why do I have more options in this view rather than the Room Calendar Permissions? I looked at two rooms and both Default options were set to "Free/Busy
time", so I changed these settings to None. Still the clients can view the full room calendar details. What are we missing to get the room calendar locked down so it is not displaying details to everyone?

Only the default groups and Exchange Admins have Full Access to these items, so that is not the issue.
-MailboxFolderPermission 1RP07AWest:\Calendar cmdlet and it shows the same access I see when I open the calendar in Outlook and view the Permissions as shown below - Default is set to None.
As I stated in my last reply the only thing that finally forced it to be blocked is changing the Resource Scheduling permissions under Options > Calendar for that room mailbox. If I have to do that for each room calendar, it's going to
take considerable time to change each one. Is there a cmdlet to allow me to access and change that setting as well?
RunspaceId   : ea4ebc26-1d22-4a7d-b115-1b609099bae3
FolderName   : Calendar
User         : Default
AccessRights : {None}
Identity     : Default
IsValid      : True
ObjectState : New
RunspaceId   : ea4ebc26-1d22-4a7d-b115-1b609099bae3
FolderName   : Calendar
User         : Anonymous
AccessRights : {None}
Identity     : Anonymous
IsValid      : True
ObjectState : New

Default enhancement set

Similar Messages

Maybe you are looking for