Default Layout for Multiple ALV displays
Hello All,
I have a requirement where I am displaying multiple ALV grid displays on different tabs of a screen.
Now I have to set a default layout for each of the grids separately as they have different fields.
Please let me know how to do it, I am using OO ALV display.
Thanks a lot
Ruchi
Hi,
According to your grid called pass the variant name
gs_variant-report = sy-repid.
gs_variant-username = sy-uname.
gs_variant-variant = v_vari. " Your variant Name
call method grid1->set_table_for_first_display
exporting
is_layout = gs_layout
is_variant = gs_variant "<<<<<<<<<
i_save = 'A'
it_toolbar_excluding = i_exclude[]
changing
it_outtab = i_output[]
it_fieldcatalog = i_fieldcat[]
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4.
a®
Similar Messages
-
Multiple ALV display using SALV(Factory method)...
Hello Experts,
Please provide me any examples on how to display multiple ALV
displays in a screen using SALV(Factory method).
Hope you can help me guys.
Thank you and take care!Hi Viraylab,
Kindly check the program below, this will help you..
*& Report Z101754_REPORT
REPORT z101754_report.
TABLES: zvbak_101754,zvbap_101754,mara.
TYPE-POOLS: slis.
DATA : i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: FLDNAME(24).
DATA : BEGIN OF itab_zvbap OCCURS 0,
zvbeln LIKE zvbap_101754-zvbeln,
zposnr LIKE zvbap_101754-zposnr,
zmatnr LIKE zvbap_101754-zmatnr,
zbrgew LIKE zvbap_101754-zbrgew,
zgi_qty LIKE zvbap_101754-zgi_qty,
zinv_qty LIKE zvbap_101754-zinv_qty,
END OF itab_zvbap.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-t01.
SELECT-OPTIONS : s_zvbeln FOR zvbak_101754-zvbeln,
s_zkunwe FOR zvbak_101754-zkunwe,
s_zerdat FOR zvbak_101754-zerdat,
s_zmatnr FOR zvbap_101754-zmatnr.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN: BEGIN OF BLOCK block2 WITH FRAME TITLE t02.
PARAMETERS : invoiced AS CHECKBOX,
s_gi AS CHECKBOX .
SELECTION-SCREEN: END OF BLOCK block2.
SELECTION-SCREEN: BEGIN OF BLOCK block3 WITH FRAME TITLE t03.
PARAMETERS : alv_list RADIOBUTTON GROUP g1,
alv_grid RADIOBUTTON GROUP g1,
s_class RADIOBUTTON GROUP g1.
SELECTION-SCREEN: END OF BLOCK block3.
Screen Field Validation event
AT SELECTION-SCREEN ON s_zvbeln.
SELECT SINGLE *
FROM zvbak_101754 WHERE zvbeln IN s_zvbeln.
IF sy-subrc NE 0.
MESSAGE e000(z754).
ENDIF.
AT SELECTION-SCREEN ON s_zkunwe.
SELECT SINGLE *
FROM zvbak_101754 WHERE zkunwe IN s_zkunwe.
IF sy-subrc NE 0.
MESSAGE e001(z754).
ENDIF.
AT SELECTION-SCREEN ON s_zerdat.
SELECT SINGLE *
FROM zvbak_101754 WHERE zerdat IN s_zerdat.
IF sy-subrc NE 0.
MESSAGE e002(z754).
ENDIF.
AT SELECTION-SCREEN ON s_zmatnr.
SELECT SINGLE *
FROM zvbap_101754 WHERE zmatnr IN s_zmatnr.
IF sy-subrc NE 0.
MESSAGE e003(z754).
ENDIF.
Start-Of-Selection Event
START-OF-SELECTION.
PERFORM select-data.
End-Of-Selection Event
END-OF-SELECTION.
PERFORM display.
*& Form select-data
text
--> p1 text
<-- p2 text
FORM select-data .
SELECT zvbeln zposnr zmatnr zbrgew zgi_qty zinv_qty
INTO CORRESPONDING FIELDS OF TABLE itab_zvbap
FROM zvbap_101754
WHERE zvbeln IN s_zvbeln.
ENDFORM. " select-data3
TOP-OF-PAGE.
AT LINE-SELECTION.
FORMAT HOTSPOT.
*GET THE FIELD NAME ON LINE SELECTION
GET CURSOR FIELD FLDNAME . "value field_value.
IF FLDNAME = 'itab_zvbap-zvbeln'.
SET PARAMETER ID 'BES' FIELD itab_zvbap-zvbeln.
CALL TRANSACTION 'ZVA01_101754'.
ENDIF.
*& Form DISPLAY
text
--> p1 text
<-- p2 text
FORM display .
IF s_class ='X'.
PERFORM display_header.
LOOP AT itab_zvbap.
WRITE : / sy-vline,
itab_zvbap-zvbeln ,
13 sy-vline,
itab_zvbap-zposnr ,
30 sy-vline,
itab_zvbap-zmatnr ,
45 sy-vline,
itab_zvbap-zbrgew UNIT mara-meins ,
65 sy-vline,
itab_zvbap-zgi_qty UNIT mara-meins,
85 sy-vline,
itab_zvbap-zinv_qty UNIT mara-meins,
105 sy-vline,
/ sy-uline(105).
ENDLOOP.
ENDIF.
*& Creating the fieldcatalog.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'ITAB_ZVBAP'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = sy-repid
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF alv_list = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
i_callback_pf_status_set = ' '
i_callback_user_command = 'USER_COMMAND '
I_STRUCTURE_NAME =
IS_LAYOUT =
it_fieldcat = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = itab_zvbap[]
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
IF alv_grid = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
i_callback_pf_status_set = ' '
i_callback_user_command = 'USER_COMMAND '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = itab_zvbap[]
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDFORM. " DISPLAY
*& Form display_header
text
--> p1 text
<-- p2 text
FORM display_header .
WRITE : / sy-vline,
'ORDER NO',
13 sy-vline,
'ITEM NO',
30 sy-vline,
'MATERIAL NO',
45 sy-vline,
'ORDER QTY',
65 sy-vline,
'GI QTY',
85 sy-vline,
'INVOICED QTY',
105 sy-vline,
/ sy-uline(105).
ENDFORM. " display_header
Please let me know if you have any doubt.
Regards,
Amit. -
GRC Default Layout for Controllers
Hi Gurus,
We have a requirement to set the default layout for the Firefighter Controllers. Currently the log report doesn't show some fields like Old Value and New value and change type.
How can we set this as global and default for all users ?
Regards,
Salmanthank you Alessandro and Katrice. I found that package but not sure what should I mention in the path to open the approver screen as it says page cannot be displayed. I tried to use object id as GRAC_UI_SPM_AUDIT_WF but doesn't open
http://------------------/sap/bc/webdynpro/sap/grac_ui_spm_audit_wf?sap-language=EN&sap-config-mode=X
We need to go to path Web dynpro Applications and test the object -
Default Layout for a report running in background
Dear Friends,
I have created a layout for report ME2L and set as default layout (for every user)....
Foreground execution picked the DEFAULT layout but when am trying to execute the same report in background, default layout is not picked but the STANDARD layout is shown in the spool
Could you please suggest me how can i use same report layout for foreground as well as background
Thanks in Advance
AnaAtanu dey,
If you wnat to download excel in back ground
You have to download in application server only.
EX:
DATA : v_filepath(80) VALUE '/data/sapdata/inc/error_log/pme_br/',
c_coma VALUE ',' .
OPEN DATASET v_filepath FOR OUTPUT IN TEXT MODE.
IF sy-subrc EQ 0.
LOOP AT i_errors_bat.
CONCATENATE i_errors_bat-plant c_coma
i_errors_bat-zzvendor c_coma
INTO v_string.
TRANSFER v_string TO v_filepath.
ENDLOOP.
CLOSE DATASET v_filepath.
Note : you can download in presentation server also.
but it requires lot of authorizations and have to use
FTP commands.
Reason is Apllication server in back ground has to
recognize the from which system request came.
Better go for OPEN DATA sets.
Don't forget to reward if useful..... -
Multiple ALV display in one screen using SALV(Factory method)...
Hello Experts,
I tried using the old 'REUSE_ALV_BLOCK_LIST_APPEND' but it does not suit my
requirement. So will it be possible to display multiple ALV display(block) using
SALV?check the sample code..
REPORT zsalv_demo_multiple.
DATA: salv1 TYPE REF TO cl_salv_table,
salv2 TYPE REF TO cl_salv_table,
salv3 TYPE REF TO cl_salv_table.
DATA: g_custom TYPE REF TO cl_gui_custom_container,
o_splitter TYPE REF TO cl_gui_splitter_container,
o_grid1 TYPE REF TO cl_gui_container,
o_grid2 TYPE REF TO cl_gui_container,
o_grid3 TYPE REF TO cl_gui_container.
DATA: it_flight TYPE STANDARD TABLE OF sflight,
it_carr TYPE TABLE OF scarr,
it_book TYPE TABLE OF sbook.
START-OF-SELECTION.
SELECT * FROM sflight
INTO TABLE it_flight
UP TO 20 ROWS.
SELECT * FROM scarr
INTO TABLE it_carr
UP TO 20 ROWS.
SELECT * FROM sbook
INTO TABLE it_book
UP TO 20 ROWS.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ABC'.
CREATE OBJECT g_custom
EXPORTING container_name = 'CONT'.
CREATE OBJECT o_splitter
EXPORTING parent = g_custom
rows = 3
columns = 1.
CALL METHOD o_splitter->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = o_grid1.
CALL METHOD o_splitter->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = o_grid2.
CALL METHOD o_splitter->get_container
EXPORTING
row = 3
column = 1
RECEIVING
container = o_grid3.
cl_salv_table=>factory(
EXPORTING
r_container = o_grid1
IMPORTING
r_salv_table = salv1
CHANGING
t_table = it_flight
cl_salv_table=>factory(
EXPORTING
r_container = o_grid2
IMPORTING
r_salv_table = salv2
CHANGING
t_table = it_carr
cl_salv_table=>factory(
EXPORTING
r_container = o_grid3
IMPORTING
r_salv_table = salv3
CHANGING
t_table = it_book
CALL METHOD salv1->display.
CALL METHOD salv2->display.
CALL METHOD salv3->display.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
Flow Logic..
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
in the Screen i placed a custom control and named it as CONT -
Default Layout for Z.transaction codes
hi,
we copied the FAGLL03 progamre and we made ZFAGLL03 becz there is a some reqirement from client.
we want set the defalut layout for this T.Code ZFAGLL03,
For this we save the layout and assign in FB00, then also when we excute the programe , it is not comeing the defalut layout .
what is process to set the defalut layout for Z T.Codes.
Regards,
Balu.KHi,
The default layout for the report cannot be done through FB00. You need to take help of an abaper. Similar to FAGLL03, you should have an icon to change and save layout for the report. If the icon is not present, an ABAPer can include it. Once the icon is available, you can change the layout and set it as default or user specific.
Hope this helps.
Thanksa and Regards,
Anit -
Disabling "Default layout setting" in ALV grid display
Hello,
We have a requirement where we need to disable layout default settings in ALV grid display.
Only certain users should be able to save the report layout as default.
We would be creating an authorization group for this and then based on the Authority check we would need to enable or disable Default layout save option.
I found that using I_SAVE in the FM "REUSE_ALV_GRID_DISPLAY", we can either enable or disable layout save option.
But our requirement is to disable Default layout save option based on the authority check.
We will find this option next to User specific option when we save the report layout.
Can anyone guide me on this?
Thanks,
Regards,
AnidHi Anid,
First of all check if you can do this excluding the buttons from the ALV with the excluding tab. If not, here is the code for the ALV OO to exclude the buttons.
FORM F_DISPLAY_ALV.
* Layout
PERFORM f_layout.
* Exclude Buttons
DATA: gt_excl TYPE ttb_button
REFRESH gt_excl.
* Append those you want to exclude. These are some of them. Check Class in SE24 -> Atributes of class cl_gui_alv_grid.
APPEND: cl_gui_alv_grid=>mc_fc_loc_cut TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_undo TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_copy TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_paste TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_copy_row TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_move_row TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_delete_row TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_insert_row TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_append_row TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_paste_new_row TO gt_excl,
cl_gui_alv_grid=>mc_fc_to_office TO gt_excl,
cl_gui_alv_grid=>mc_fc_expcrdesig TO gt_excl.
CALL METHOD gv_alv_grid->set_table_for_first_display
EXPORTING
it_toolbar_excluding = gt_excl[]
is_layout = wa_layout_main
is_variant = wa_variant
i_save = 'A'
CHANGING
it_outtab = gt_alv[]
it_fieldcatalog = gt_fieldcat[]
it_sort = gt_sort[].
Edited by: Ernesto Caballero on Mar 11, 2010 5:59 PM
Edited by: Ernesto Caballero on Mar 11, 2010 6:03 PM -
How to set default layout for ALV grid ?
Dear all,
When execute ALV reports, the user customize the layout for their own purpose. But each time they run that report, they must choose again their layout. Is there any way to set the layout as default ?
Thank you very much,
Sylvecat.Hi,'
After you have created a layout just follow the steps listed below for making it as default layout:
1. Click (Save Layout).
2. Enter a name in the Save Layout field. The name must begin with a letter.
3. Type in a description for the layout in the Name field.
4. Select the Default Setting check box if you want this layout to be the default layout every time you run
the report.
5. Click (Continue).
Note: A warning message will appear if you are trying to save over an existing layout. Close the box by
selecting the X in the upper right hand corner or choose Yes to overwrite the layout.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
Single Printing for Multiple ALVs in Splitter Containers
Hi,
I am creating multiple ALVs (3 to 4) of CL_GUI_ALV_GRID class in my report. The ALVs are being displayed inside the splitter containers of class CL_GUI_SPLITTER_CONTAINER. My question is how to print all the ALVs inside these multiple containers with a single execution? I've found a close answer to this at this thread but it is using the REUSE_ALV... function.
How to print multiple ALV Grids with only one print dialog?
Is there a way to do this by making use of the CL_GUI_ALV_GRID printing functionality, if there is?
Thanks for your kind attention,
Kamal.-found alternative.
-
Default Layout Variant using LIST Display FM
Hello All,
I'm using the FM REUSE_ALV_LIST_DISPLAYin my Report.
I want to save the layout Variant as a Default Layout Variant .
But when I'm clicking the option for saving a Layout I'm getting only one check box for User Specific Layout.
How can I set a layout created variant as a DEFAULT Layout Variant ?
Regards,
Deepu.KHi,
Once List is displayed, use the path: Setting->Layout>Layout Management->Click the check box against the layout which you want to set as the default. Then click on Define Default settings, first icon. You can follow the above instructions after running one of the DEMO pgms viz. BALVSD01.
I hope this helps,
Regards
Raju Chitale -
Hi All,
How can i display Multiple ALV Grids at a time in the output screen ?
I have to create dynamic table structures for each ALV, but all this ALV's has to be displayed at 1 time in the first output screen!
Regards
Rakesh.Have a custom control on the screen.
Create a custom conatiner.
Use EASY splitter container.
Now you have two containers, in which each of the ALV grids can be displayed with the two dynamic tables you have.
Look at the BCALV examples in your system.
Regards,
Ravi
Note - Please mark all the helpful answers -
Wrong default layout for a new customer
Hi all,
I hope somebody can share inputs with regards to this issue.
I'm assigning a default layout to one customer group (layout1 for all Group1). When this was done, a list of customer codes were included in the list and each were ticked from that list.
Second layout called layout2 for the setting 'Set &as Default for all BPs (for Whom a Default Layout Has Not Been Assigned).
Scenario: A new customer code is created belonging to Group1.
Issues:
a. This new customer code does not automatically follow the setting on default layout which is layout1. When the layout1 default setting was double
checked, the new customer code was part of the list, but it was not ticked.
b. When document was previewed, it uses the wrong layout2.
c. The user still has to update the layout1 default setting, ticking the tick box from the list for the new customer code, then clicking update in then
layout designer window.
Question: Is this a normal behaviour of the system? I thought that setting it as default for certain customer group will be applicable even to newly created ones under that group.
Regards,
CathyHi,
I am afraid that it is your SAP B1 version current behavior but you may check using demo database. What is your SAP B1 version anyway ? what is your database localization ?
You may try the solution part from one of these notes below:
993486 - 'Set as Default for All BPs' doesn't affect specific BP
Version 5 Validity: 21.01.2011 - active
Language English (Master)
Portuguese
Content: Summary | Header Data | References | Validity
Symptom
Specific printing template for Business Partner can not be changed in attempt to define printing template as a default template for all Business Partners.
Cause
Functionality description
Solution
In order to change a specific default printing template for Business Partner follow the steps below:
1. Choose the required template and press on the 'Set as Default' button.
2. Choose the 'Set as Default for Specified BP' and 'Set as Default for Current User' option.
3. Uncheck the box near the BP name and press on the 'Update' button.
4. Choose the required default template (new template) and press on the 'Set as Default' button.
5. Choose the 'Set as Default for all BP' option.
Other terms
Print Layout Designer, Default Template, Set as Default for All Users,
Set as Default for Current User, Set as Default for All BPs, Set as Default for Specific BP
Header Data
Released On
24.02.2011 20:52:30
Release Status
Released for Customer
Component
SBO-GEN-PLD Print Layout Designer
Other Components
SBO-SH-PLD-A2 Tips and tricks for building PLD templates
Priority
Recommendations/additional info
Category
Consulting
References
This document refers to: SAP Business One Notes
861088
Cannot set a template as default for all users
This document is referenced by: SAP Business One Notes (1)
861088
Cannot set a template as default for all users
Validity
Software Component
Version
SAP BUSINESS ONE
2005 A
2005 A SP01
2005 B
2007 A
2007 B
8.8
2nd note:
861088 - Cannot set a template as default for all users
Version 4 Validity: 04.08.2009 - active
Language English
Content: Summary | Header Data | References | Validity
Symptom
When print previewing,the template used is not default template.
Cause
A template has been defined as default for all users, when previewing this it is not the template which has been set as default for document.
Solution
In order to change to a different default template for all users and all business partners please do the following:
a) "Set as default for specified Business Partner" and "set as default for current user"
b) Add tick for this Business Partner
c) Update by ticking again the specific Business Partner
d) Change set as default for all users and all Business Partner's
Other terms
Print Layout Designer, Default Template, All users, Set as Default template, SAP Business One
Header Data
Released On
04.08.2009 11:28:58
Release Status
Released for Customer
Component
SBO-GEN-PLD Print Layout Designer
Other Components
SBO-SH-PLD-A1 Print Layout Designer known Issues
Priority
Recommendations/additional info
Category
Consulting
References
This document refers to: SAP Business One Notes
993486
'Set as Default for All BPs' doesn't affect specific BP
This document is referenced by: SAP Business One Notes (1)
993486
'Set as Default for All BPs' doesn't affect specific BP
Validity
Software Component
Version
SAP BUSINESS ONE
2004 A
2005 A
2005 A SP01
2005 B
2007 A
2007 B
JM -
Set a default layout for all users via DIAPI
Hello everyone,
I am attempting to set a default report for all users/business partners using the DI-API.
I can accomplish this in the B1 application via Tools> Layout Designer...>Set as Default
If there are entries in the RDFL table for this layout, I am prompted to delete these entries and set this layout as the default for all users/BP's
Based on the SDK Documentation, the following code should accomplish the same thing via the DI-API
(stripped down for clarity)
Dim oDefaultReportParams As DefaultReportParams
oDefaultReportParams = oLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiDefaultReportParams)
oDefaultReportParams.LayoutCode = sMyLayoutCode
oDefaultReportParams.ReportCode = sMyReportCode
Me.oLayoutService.SetDefaultReport(oDefaultReportParams)
Code executes fine, but it doesn't have the expected impact on settings. The above code adds an entry to the RDFL table rather than changing the DfltReport field in the RTYP table like I expected, so instead of setting the default report globally for all bps/users, its adding an entry to the RDFL table to set the value for a specific user/bp
I experimented by including and setting the following properties to every combination I could think of with the same results
oDefaultReportParams.UserID = 'tried 1, 0, -1
oDefaultReportParams.CardCode = 'tried "", "0", "-1"
Am I misunderstanding the API, or using the wrong objects/calls...? If all else fails I could accomplish this via the UI-API instead, but the application was intended to be a stand alone app that didn't rely on SAP B1 application running, so any help or suggestions would be much appreciated.
Thanks!Hi,
Please repost at SDK forum to get quick response. Close this thread here with helpful answer.
Thanks. -
Default layout for T code FAGLL03
Hi,
I have created a layout for T code FAGLL03. I want to make this layout as default layout only for me i.e user specific so that whenever I execute this T code, I get the report in that layout.
Is it possible to create user specific layout which wil be defaulted when that T code is executed.
Regards..Hi:
Yes you can easily make default user layout that will be set as default for your own log in only. Please execute FAGLL03 ...once report is executed, set you layout as per your desire and in order to make it user default please go to Menu...Settings...save....there you will have to specif name starting with / and on the same screen you will find the user default check box . Just check and save it. Now exit from report now every time you will execute the report you will get the customized layout you saved.
Regards -
Dear all,
I have a layout setting that is supposed to have multiple columns. The first columns I have a fixed width in pixel (for example 120px), and the rest of the columns I want to set it in %. So, if the user resize its browser, the first column will stay 20px, while the rest will resize accordingly.
What is the best way of doing this in JSC?
thank you in advance1. In first, second, and third rows, I have a label
and a text field. I want to left justify the label,
and the textfield. So, using gridPanel with 2 columns
will do the job.
2. In the fourth, fifth, sixth row, I have 2 labels
and 2 fields.In this order?
I want to keep the left justify setting
for the first label and textfield. If can't use the
grid panel because the layout for each labels are not
left justified with the same component in the first
and second rows. Beside the width of each labels and
textFields are not the same.That's why I'am not using the label attribute of TextField but separate Label components.
Create a Grid Panel with 4 columns and drop into
label1, textfield1, dummylabel11, dummylabel12
label2, textfield2, dummylabel21, dummylabel22
label3, textfield3, dummylabel31, dummylabel32
label4, textfield4, label5, textfield5
label6, textfield6, label7, textfield7
label8, textfield8, label9, textfield9
Create CSS classes for example as follows:
*.gridlabel {...}
*.griddata {...}
Set the columnClasses attribute of the GridPanel to "gridlabel, griddata, gridlabel, griddata".
To arrange more than one components in one cell of the GridPanel wrap them in a LayoutPanel without attributes.
Maybe you are looking for
-
How can we update the last synchronization date and time..on SUP in sccm 2012 R2
Hi, Can you any one please guide me how can i update the last synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log "Wak
-
Hi Experts, I want to display the below said in top-of-page (alv) as TITLE can include only 72 characters. *FORM TITLE. WRITE BUDAT-LOW DD/MM/YYYY TO DATE1. WRITE BUDAT-HIGH DD/MM/YYYY TO DATE2. CONCATENATE IT_FINAL-NAME1 'Reconcilliation Statement F
-
Is this intentional or should I get help on the matter
-
Error i am getting is tmshutdown.2708.3904657088.-2: FATAL: internal error: CMDTUX_CAT:766: ERROR: must run on master node
-
Can´t get in to the store from my iTunes since updated my Laptop from Vista To Windows7.
Hi, Have anybody experienced the same issue? iTunes works ok for all the rest of its functionalities, but when trying to access to the store right from the program it tries, and tries and after some time a message comes up saying that an error # 11