Default number format setting

Hi,
I have created a Web intelligence report. One of the columns need to display percentage values based on another column. Now suppose there is 0 as the value in the other column the corresponding percentage should display 0.00%. Maybe as default value. I tried to set the properties>text format>number format --> to Number and properties to 123,456,70%; -123,456,70%. But still it doesnt display it as 0.00% when there is no value. It displays #DIV/0.
Could anyone please help me in resolving this?
Thanks!

Hi,
Go to CJE6 & select the form 12KST1A, click on column heder & do the number formation as u required(clicking on number format button).
make sure to set the factor always against the required decimal places.
do the all formating for all required forms you are using
Hope this will solve your issue.
Regards,
Sam L.

Similar Messages

Webserver generator default number format

How can you set the default number format for Designer generated webserver apps? Designer generated Forms and reports use the TXTDFN property for this... but it does not exist in the webserver generator properties?
Until I figure this out... all of my data with the NUMBER datatype (with no (#,#)) are being displayed with 38 digits behind the decimal!!
Please Help,
Pete

I've been having similar problems, but nobody seems to have an answer.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by karanika:
How can you set the default number format for Designer generated webserver apps? Designer generated Forms and reports use the TXTDFN property for this... but it does not exist in the webserver generator properties?
Until I figure this out... all of my data with the NUMBER datatype (with no (#,#)) are being displayed with 38 digits behind the decimal!!
Please Help,
Pete<HR></BLOCKQUOTE>
null

Date Format in Zreport similar to the default date format set using su01.

Dear All,
            I have a requirement as to change the date format in Zreport as the one which is set in default date format for the user in Su01 tcode.
Ex.. If the user has set the default date format in SU01 as ' YYYY-MM-DD' , in report also, date should appear as '2009-12-24'.
Is there any code or Function Module to change the date format in report as in the default Date format?
Can u help me in this?
Bye.....
Cheers
Christina.

Try the following code.
select the format of current user from usr01 table.
    SELECT SINGLE datfm FROM usr01
    INTO w_datfm
    WHERE bname = sy-uname.
Format based upon the current user settings. put this total code inside one form for reusability.
    IF w_datfm = '1'.
      CONCATENATE w_date6(2) c_dot w_date4(2) c_dot w_date+0(4) INTO outtab-value.
      CONDENSE outtab-value NO-GAPS.
      CONCATENATE w_rundate6(4) w_rundate3(2) w_rundate+0(2) INTO w_date.
      CONDENSE w_date NO-GAPS.
    ELSEIF w_datfm = '2'.
      CONCATENATE w_date4(2) '/' w_date6(2) '/' w_date+0(4) INTO outtab-value.
      CONDENSE outtab-value NO-GAPS.
      CONCATENATE w_rundate6(4) w_rundate0(2) w_rundate+3(2) INTO w_date.
      CONDENSE w_date.
    ELSEIF w_datfm = '3'.
      CONCATENATE w_date4(2) '-' w_date6(2) '-' w_date+0(4) INTO outtab-value.
      CONDENSE outtab-value NO-GAPS.
      CONCATENATE w_rundate6(4) w_rundate0(2) w_rundate+3(2) INTO w_date.
      CONDENSE w_date.
    ELSEIF w_datfm = '4'.
      CONCATENATE w_date0(4) '-' w_date4(2) '-' w_date+6(2) INTO outtab-value.
      CONDENSE outtab-value NO-GAPS.
      CONCATENATE w_rundate0(4) w_rundate5(2) w_rundate+8(2) INTO w_date.
      CONDENSE w_date NO-GAPS.
    ELSEIF w_datfm = '5'.
      CONCATENATE w_date0(4) '/' w_date4(2) '/' w_date+6(2) INTO outtab-value.
      CONDENSE outtab-value NO-GAPS.
      CONCATENATE w_rundate0(4) w_rundate5(2) w_rundate+8(2) INTO w_date.
      CONDENSE w_date NO-GAPS.
    ENDIF.

How to set default number format for whole app

Hi!
I have a bunch of View Objects and I have to set the format for each attribute of type number. I've tried using
MyAtt_FMT_FORMAT=#,##0.00
MaAtt_FMT_FORMATTER=oracle.jbo.format.DefaultNumberFormatter
on just a couple of attributes and it works OK. But since I have a lot of number fields across application in a lots of view objects, I would like to set this format as default for all the number fields in my application.
Can I do that and if yes, how?
Thanks

you can use Domains.
chapter 26 Advanced Entity Object Techniques in Developer’s Guide For Forms/4GL Developers
Regards,

How to change default number format for saved data in signalexpress

I cannot find an option for determining format and precision of saved data. By default it is scientific with i think 3 siginificant numbers. How and where to do it?

Stjepan, it sounds like you're right where I was 2 months ago! Glad to see I'm not the only one struggling w/ SE.
Here's what I've had to do to control the precision of the data in my ascii file.
Insert an Amplitudes and Levels step from Analysis>Time Domain Measurements.
In the A&L settings, deselect Export RMA Value (keep Export DC Value selected).
Now drag that DC signal from the A&L step into your data view (literally drag and drop this signal onto the graph). From here you can configure the data view's properties to your likings, I.E, significant digits or digits of precision, floating point, etc.
I've found that Floating Point, 2 Significant Digits, and uncheck Hide Trailing Zeros to work well (visually speaking).
Insert your Save to ASCII step after the A&L step, and be sure to save your A&L's DC signal.
The data will export exactly as it's shown in the display.
TIP: you can rename your signals from any of the steps. This is handy because it's the renamed channel names that show up in your data headers (much more descriptive when you have multiple channels).
My apologies if this is all information you already know...
Message Edited by OKors on 09-10-2009 10:27 AM
SCXI- 1000 Chassis w/ 1346 adapter
PCI 6281 DAQ card
SCXI- 1520 Bridge Board w/ 1314 Terminal Block (x2)
SCXI- 1180 Feedthrough Panel w/ 1302 Block
Signal Express 2014.
Win7 Enterprise

How to override the NUMBER format in BEX?

Hi,
I want to override the number formats in BEX queries (Excel).
In the Query Designer -> Query Properties -> Value Display,
or in 3.x: Query Properties -> Display -> Number Format,
the setting "Display of +/- Signs" affects how the numeric values in Excel will be displayed. This setting seems to take effect after everything else is done.
I can change any cell formatting (pattern, border, color, etc.) except the number format. I have tried redefining Styles, assign different styles to the Result Area, setting up a default template, even Visual Basic (Sub SAPBEXonRefresh), nothing works, my settings always get overwritten by the query setting.
For example:
I am trying to assign the Number Format "Accounting", with a "$" sign in the far left of the fields, to the amounts in my workbook.
It should look like this: "$ (123,456.00)"
The results: my settings are replaced by the format "Currency" with the "$" sign.
" ($123,456.00)"
It must be due to that number format setting in the query designer.
I was hoping the number format setting in the query designer could be switched off. But apparently it is not possible. Not even the "Adjust Formatting after Refreshing" setting affects this behavior. It always takes effect.
Does anyone have any idea what could be done about it?
Thank you,
Vince

OK, I think I have just found the answer to my own question...
I had done something in the VB editor that created this whole problem. Now it is fixed and works as it should.
Thanks anyway.

How to globally modify number formatting in Crystal Reports

How do I globally modify the number formatting in Crystal Reports to NOT use the default which is “System Default Number Format”? The goal is to modify the number formatting to NOT contain commas. This modification should be global and should apply to any local account that will launch and use Crystal Reports on the server where it is installed. Can anyone help?

Hi Raghavendra,
For new reports, we have tried the setting you specified. The question is, how can we force Crystal Reports to “keep” and “retain” the adjusted format globally every time users create a new report?
Thank you!
Ivy

Input number format

Hi,
i have number format set to 999G999G999G990 e.g.123.435,34
it is displayed ok, but i dont wonna to enter the number in that format.. it is very annoying to enter number with dots or to change it..
pls help
thx

it is customer specific. A bank e.g. must see those dots. When they have
174.000.000,00 EUR it is very important, that the dot is at the correct place :-)
174000000,00 EUR (you need 5 seconds to see how many millions the sum is)
and format masks with NUMBER (15,4) is a template format masks in these projects

How to set default number of records shown in an interactive report table?

How can I set the default number of rows shown on an interactive report?
The default seems to be 15, I can't find where this can be changed.

Hi John,
When you're logged into the development interface, run the page with the IR. Set the rows from 15 to 5 (for example) and click "GO". Now click on the Actions Menu icon (the green gear), click "Save Report". "Save as: As default report settings". Click Apply and your rows will be set.
Martin
[http://apex-smb.blogspot.com/]

Custom Number Format Default to Numeric Keyboard

Hello,
I recently put together a timesheet form for our superintendents. I have some fields to accept our company's 6-digit cost codes. Initially, I used the general Number format. This worked well since, on the iPad, the numeric keyboard came up by default and only numbers were accepted. However, there was no limit to the number and it always removed the leading "0", which was not acceptable. Our cost codes are layed out as follows:
011010
082010
120010
It was important that we retain the leading "0". Then, after some research I found a code (entered into to Custom format) on this forum allowing me to retain that zero:
event.rc = true;
if (event.value) {
     if (/^\d{6}$/.test(event.value)==false) {
          app.alert("Error! The entered value must be 6 digits.");
          event.rc = false;
This worked well... however, I am back to the numeric keyboard not being default and the field accepting letters as well as number.
MY QUESTION:
How do I create a numeric only, exactly 6-digit field that will open the numeric keyboard on the iPad (like the number field does). Is this possible?

Hello,
I recently put together a timesheet form for our superintendents. I have some fields to accept our company's 6-digit cost codes. Initially, I used the general Number format. This worked well since, on the iPad, the numeric keyboard came up by default and only numbers were accepted. However, there was no limit to the number and it always removed the leading "0", which was not acceptable. Our cost codes are layed out as follows:
011010
082010
120010
It was important that we retain the leading "0". Then, after some research I found a code (entered into to Custom format) on this forum allowing me to retain that zero:
event.rc = true;
if (event.value) {
     if (/^\d{6}$/.test(event.value)==false) {
          app.alert("Error! The entered value must be 6 digits.");
          event.rc = false;
This worked well... however, I am back to the numeric keyboard not being default and the field accepting letters as well as number.
MY QUESTION:
How do I create a numeric only, exactly 6-digit field that will open the numeric keyboard on the iPad (like the number field does). Is this possible?

How to set default number of records shown in report table?

How can I set the default number of records shown in a table report?

This is how report attributes page should look like and there is the number of rows where you enter whatever you need:
http://i44.tinypic.com/es95bn.gif
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Set Default Date Format in 4.2 jQuery Mobile Smartphone

Hi guys,
on "normal" Desktop interfaces you can set a default date format in the Globalization settings. Currently I'm working on a JQM app, and I noticed, that the same settings I have for date format in other apps, don't take affect.
I now read in the 4.2 release notes, that somehow this issue was a bit buggy. Is this fixed? I would like to set a german date format like "DD.MM.YYYY"; (as it's working in desktop apps). How can I do it? In global settings this entry gets saved.
But whenever I want to set an individual date-picker-item to that format, it changes back to "YYYY-MM-DD" after saving. And I don't really want to get into writing a conversion function in the dml-processing now.
Thanks for any hints, best regards,
tobi

Hi Tobi,
the "Date Picker (HTML5)" item type maps to the HTML5 input type="date", which requires that the internal format of the date value always has to be YYYY-MM-DD, but it's up to the browser to actually display the date in the format of the local operating system setting. The browser of iOS for example shows the date in the format of my local language/country setting.
See also http://stackoverflow.com/questions/7372038/is-there-any-way-to-change-input-type-date-format
To make a long story short, it's not possible to specify the display format for those date pickers, because it's not supported by the HTML5 spec.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

How to set a Default date format.

I would like to know if it's possible to set a default date format (b.e. dd/mm/yyyy) for new date object and not for the current object?
Thanks

default date format (b.e. dd/mm/yyyy) for new date objectI would guess not, and that is regardless of how they format it.
Consider the java.util.Date.toString() method. There is no way to change the behaviour of that unless you want to derive a class from Date.
At least not in 1.3.0 it isn't. The java.util.Date class uses a private data member called simpleFormatter which it hard codes to
formatter = new SimpleDateFormat("EEE MMM dd HH:mm:ss zzz yyyy", Locale.US)
If however the time was formatted using the defaults from java.text.DateFormat then you could set the TimeZone. However, that doesn't impact formatting, it merely changes the offset (and daylight savings.)
You could set the Locale in java.util.Locale. That looks like a real possibility. But the documentation doesn't really provide anything that suggests how you provide your own and impact the time stuff. For example, Date which uses static finals for the time stuff - which suggests Locale can't impact it. And of course changing the Locale would impact your entire application, so you would have to make sure all threads were blocked while it was changed.

How to set default export format in CrystalReports Viewer

When Viewing Crystal Reports in InfoView, the top left button can choose export file format, how to set it default to Excel?

Hi Jennie Xiang,
You can set the default export format in Crystal designer before publishing in infoview.
Open the report in Crystal designer and go to file>export>export options--> select the export option to xls and check the options that you want and click on OK.
Now try exporting the report by clicking on export button then you can see the first option as xls with all format options that you have selected before by default.
By saving this report at server (infoview) you can get the same options while exporting from viewer.
Regards,
Ragahvendra

[svn] 3148: You can now use CSS styles to set the default text format for TextView.

Revision: 3148
Author: [email protected]
Date: 2008-09-08 15:01:15 -0700 (Mon, 08 Sep 2008)
Log Message:
You can now use CSS styles to set the default text format for TextView. It no longer has any formatting properties. It supports the entire set of Gumbo text format styles.
SkinnableComponent and Group now also support all these styles. However, skins such as ButtonSkin, TextInputSkin, and TextAreaSkin continue for now to specify instance styles on their TextBox, TextGraphic, and TextView, in order to give them a Gumbo look rather than a Halo look. So if you try setting, for example, the fontSize on the Application, it doesn't yet affect the text format of a Button, TextInput, TextArea, etc. unless you remove the instance style in the skin.
Reviewer: Glenn
Bugs: -
QA: Lots of new stuff to test!
Doc: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextArea.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextInput.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextView.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/Group.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/SkinnableComponent.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextBox.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextGraphic.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/TextGraphicEle ment.as

Nevermind guys - I did it using the 'rb_on.selected' command on the "on" radio button if the .txt file variable was "on", else the "off" radio button is selected.
Thanks for taking a look though!
Shaun

Default number format setting

Similar Messages

Maybe you are looking for