Default setting for non saleable item for sales order

Dear sir,
i have one non saleable order type for breakage/damage goods return
in that order type i want by default system has to pickup the NONS(nonsaleable) storage location
it present right now system is pickup saleable storage location
but in master i have difine both the storage location in system
so how can i do dafult setup for this order type to pickup NONS (non saleable) storage location

Hi Ashok,
The picking location is determined based on the shipping point, the delivering plant, and the storage condition for the material as defined in the material master.
Please do the customization as above.
Hope this helps,
Regards,
MT

Similar Messages

How to Link Sales Order for Non Purchase items to Purchase Order

Hi,
I am using SAP 2007A SP01 PL05.
I am creating a Sales Order for Non Purchase Items where i have 3 companies involved.
1. Owner of the Product
2. Transport Agent
3. Customer
Owner Sells to the Customer non Purchase Items manufactured internally.
Owner buys transports services from the Agent for these non purchase items.
I am creating a Sales Order for the Customer and at the same time i want to create a Purchase Order to the Transport Agent.
How do i Link Sales Order to a Purchase Order for Transport.
The Transport Charges are not to be Charged to the Customer and should not be added to the Sales Order.

Hi
Create purchase Item frieght in the purchase tab enter the transporter. include this in the sales order and in the logistic tab of sales order active purchase order check box, you frieght item will have a value of 0. when you create sales order the the system will lead you to create purchase order. there you can enter the price of freight. you can explore options there.
hope this will help you.. by doing this your base ref for PO would be Sales order.
Regards
Sandeep

How to get report for deleted line items from sales orders

Dear FRIENDS,
please infirm the t.code or report for viewing the deleted line items from sales ordrers.
Kindly do the neeedful.
regards,
N.M.PAWAR

Hi,
With transaction SE16 you can view table CDHDR for header changes and
CDPOS for item changes. This includes deletion.
OR
GO to VA03 - Display Sales order -> Put order no : don't press enterbutton. -> Go to Enviornment -> changes -> You will get details
Date ItmNo. SLNo Action
Hope this help please close the thread if answers

Order related billing for Partial Qty item in sales order

Hi SD Gurus,
In case of delivery-related billing we can create a bill for partial qty or item by creating delivery(against order) for partial qty/item. Is it possible to create order-related bill for the partial qty or item ?
Any suggestion on the subject is appreciated.
Thanks in advance,
Velmurugan

HI Velmurugan,
This can be solved through by doing an order related billing,
First check weather copy control setting is there for order to billing.
In item category check for billing relevance. Make it has order related billing.
Now do order related billing for partial quantity.
Regards,
Nagesh

Block item for short dated item in sales order

We are using batch determination at sales order level.I want to hold the sales order based on shelf life expiration date for a batch. We are using FEFO- First expiry First Out strategy. We are planning to use user status profile to block the particular line item from getting delivered. Please guide me to acheive this. Thanks in advance.

Dear Venkates,
Kindly deactivate the check box Not Modifiable of the corresponding partner function by selecting Partner determination procedure - Partner Functions in procedure
Do this change if you have maintained partner proc. for sales document type or item category in
SPRO - Sales and Distr. - Basic Functions - Partner Determination
Hope this would solve you problem. If not kindly elablorate your problem.
Regard,
Sagar

Provision that MRP is not be considered for specific line item of Sales Ord

Is their any provision that MRP is not be considered for specific line item of Sales Order in MRP run? (Ex: Planned order is also generated for free/ADC sample quantity entered in Sales order)

Dear
Go to Sales and distribution--> Sales --> Sales Documents -->Schedule Lines --> Assign schedule line categories.
Choose the item category (eg. TAN) which is coming in the sales order and enter CN - No. Mat. Planning in the the manual schedule line category (MSL Ca) for MRP type PD.
This will enable you to choose while creating sales order in the Tab procurement column SL Ca.
Choose CN - No mat.planning for the schedule items which you don;t want MRP.
Regards
Soundar

How to ChangePlantfor each item of Sales order using User Exit SAVE_DOCUMEN

Hi All,
I have to change plant for Each line item of sales order using (MV45AFZZ) (USEREXIT_SAVE_DOCUMENT) based on first Schedule line.
if Confirmed Quantity is Less than Ordered Quantity.
based on first Schedule line.
it has to select other Plant and need to populate it in line item of sales order.Please see the below code and let me knoe if any changes required... Thanks in Advance.
data : wa_vbep like xvbep,
       Lv_matnr type mara-matnr,
       lv_werks type marc-werks.
DATA: it_vbap TYPE STANDARD TABLE OF vbap,
      wa_vbap TYPE vbap.
field-symbols: <wa_vbap> type VBAPVB.
clear wa_vbap.
*loop at xvbap into wa_vbap.
loop at xvbap assigning <wa_vbap>.
read table xvbep into wa_vbep with key posnr = <wa_vbap>-posnr.
if wa_vbep-ETENR = '0001'.
if sy-subrc = 0.
IF wa_VBEP-BMENG LT wa_VBEP-WMENG.
    SELECT SINGLE DWERK
                 INTO lv_werks
                 FROM MVKE WHERE matnr = <wa_VBAP>-matnr
                            and DWERK ne <wa_VBAP>-werks.
if not Lv_werks is initial.
if lv_werks EQ 1033.
move '1002' to <wa_vbap>-werks.
if sy-subrc eq 0.
xvbap-werks = <wa_vbap>-werks.
modify xvbap from <wa_vbap> .
endif.
elseif lv_werks EQ 1003.
move '1003' to <wa_vbap>-werks.
elseif lv_werks EQ 1010.
move '1010' to <wa_vbap>-werks.
endif.
endif.
endif.
endif.
endif.
endloop.
endif.
Regards,
Sudhakar Reddy.A

You have to use the form routine "USEREXIT_SAVE_DOCUMENT_PREPARE"
regards
Vinod

MIGO Print label WEE1 for non stock items from GR for PO

Hi,
I added logic to print new label into printing program MZ07DETI which is printing labels for stock items. My label is for non stock items. The problem is that for non stock items printing process is not triggered. I created PO with Account Assign. Category F, P or K no material number and no storage location. For this type of PO no print possible during GR posting. Is any set up available in IMG to make it work. I appreciate any response.

Hi,
Please check up if there is any default value at the plant level;in case of such default,the system will post to the GL Account defaulted,not with standing the "standard item category".Better checkup if any cost center /order has been assigned.
The GL item is defaulted thro'the item category.If both the goods and services have been defaulted to the same GL Account,then not with standing the type [ie] whether goods or services,the system will post tot he same GL Acct.
Hope this helps.
Regards.
Ramesh

MRP RUN for the more than one line item in sales order.

Hi ,
In the sales order nuber of line item are , i will have to take MRP RUN for selected line item .
So plz suggest what development will require?
Abhay
Edited by: abhay patil on May 30, 2008 8:52 AM

HI,
U can write separate prog. Which will ask sales order no. and from to line item or multiple line item of sale order. Then in loop internally pass the each line item no to MD50 prog. Which will run in background.
I will give u sample prog. Which I had created for running MRP for all the lines items of given sales order in one go.
*& Report ZPRG_PP_001
REPORT ZPRG_PP_001.
tables vbak.
data: begin of it_vbap occurs 1,
        vbeln type    vbap-vbeln,
        posnr type    vbap-posnr,
      end   of it_vbap.
DATA: P_MODE   TYPE    C.
      Batchinputdata of single transaction
DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
selection-screen begin of block b1 with frame title text-001.
parameters :   p_vbeln like vbak-vbeln obligatory.
selection-screen skip.
parameters :   p_fore   radiobutton group mode,
                 p_back   radiobutton group mode default 'X'.
selection-screen end   of block b1.
at selection-screen.
Check Sales Order
if not p_vbeln is initial.
    select single * from vbak
      where vbeln eq p_vbeln.
    if sy-subrc <> 0.
      message e499(sy) with 'Invalid Sales Order no.' p_vbeln.
    endif.
endif.
start-of-selecTION.
Get Sales order items
select vbeln posnr from vbap
    into table it_vbap
    where vbeln eq p_vbeln.
Set BDC mode
if p_back eq 'X'.
    p_mode = 'E'.
else.
    p_mode = 'A'.
endif.
Process MD50 BDC
LOOP AT IT_VBAP.
    perform bdc_dynpro      using 'SAPMM61X' '0160'.
    perform bdc_field       using 'BDC_CURSOR' 'RM61X-TRMPL'.
    perform bdc_field       using 'BDC_OKCODE' '/00'.
    perform bdc_field       using 'RM61X-KDAUF' IT_VBAP-VBELN.
    perform bdc_field       using 'RM61X-KDPOS' IT_VBAP-POSNR.
    perform bdc_field       using 'RM61X-BANER' '1'.
    perform bdc_field       using 'RM61X-LIFKZ' '3'.
    perform bdc_field       using 'RM61X-PLMOD' '3'.
    perform bdc_field       using 'RM61X-TRMPL' '1'.
    perform bdc_dynpro      using 'SAPMSSY0' '0120'.
    perform bdc_field       using 'BDC_OKCODE'   '=XBAC'.
    CALL TRANSACTION 'MD50' USING BDCDATA MODE P_MODE.
    CLEAR BDCDATA.
    REFRESH BDCDATA.
ENDLOOP.
end-of-selection.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDFORM.
Ajay P. Nikte

How to set_value for non-table items.

I have a form, based on scott.emp, with a button and three fields, empno, ename and xxx. The empno and ename fields are based on the scott.emp table, whereas the xxx field is a non-table based field.
Setting xxx text type to either a text area or text box makes no difference.
The following code in the buttons PL/SQL Button Event Handler, Custom section results in a (WWV-00000) error.
begin
p_session.set_value(
p_block_name => 'DEFAULT',
p_attribute_name => 'A_XXX',
p_value => 'Hello');
end;
However, if I change the p_value to ename, a table based item, the code works as expected.
I ran across a post that had the following link
Re: transactions
Regarding setting values for non-table items. Unfortunately, the post was made prior to the latest discussion forum reorganization, so it's no longer valid.
I would appreciate any help on the problem.
Thanks, Larry

Hi,
Try using set_value_as_string
begin
p_session.set_value_as_string(
p_block_name => 'DEFAULT',
p_attribute_name => 'A_XXX',
p_value => 'Hello');
end;
Thanks,
Sharmila

Auto G/L population for Non Stock Items

Hi,
I am trying to configure the Auto G/L Population for Non stock item (Material Master item).I have created the Material without Valuation class assignment.
Master data:
Material 1(Material type : Non Stock,No valuation class assignment,attached with Material Group X)
Material group X is attached with Valuation class (Entry aid for items without material master)
In OBYC -->Transaction GBB with modifier VBR maintained the G/L for the relevant valuation class.
I am expecting to default that G/L in Purchase requisition creation screen. But system is not defaulting the G/L account.
Is there anyother steps involve to achieve the G/L default for NON STOCK Materials without assigning the valuation class to Material master.

Hi,
You can set with the help of t.codes:
OME9, OMGO,& OBYC.
Check the below link how to set default General Ledger for Non stock item (Material Master item) in purchasing document
http://www.bluemarlinsys.com/ns/0603-03.asp
Regards,
Biju K

Cost of goods sold (cogs) for non-shippable items (intangible items)

Hi Experts,
Can anyone please help me on this issue for shippable item we can check in material transactions--distributions for cogs account and cost of an item. But how can we check the cost and account for non-shippable items (intangible items) with out using the items and item cost form.
Thanks in advance,
Christ.

Hi,
You need to replace the join MSI.SALES_ACCOUNT(+) = GCC.CODE_COMBINATION_ID with msi.cost_of_sales_account(+) = GCC.CODE_COMBINATION_ID to get the COGS account. Currently you are getting sales account not COGS.
Thanks
Vishalaksha

MR11- for non material item

I just try to do for one PO with all non material item and
I can't do MR11 for non material item..
error:      Error while determining the currency types for 6302400500 00010

Hello,
a non material item can be a text item but it can be also a service item.
This depends from your customizing. Which item type is relevant for your non material item.
In the item type you can maintain if an item is relvant for pricing or not.
Please have a look in transaction VOV7. Here you can set the flag 'Pricing'.
This flag can have the following specification:
      Blank No pricing
X     Pricing standard
A     Pricing for empties
B     Pricing for free goods (100% discount)
I hope that the information are helpful.
Best regards
Claudia
Edited by: Claudia Neudeck on Jul 17, 2008 8:17 AM

Picking non inventory items for delivery

hello
Can anyone help us with the following issue :
- in our deliveries we have both inventory items and non inventory items (freight lines, software). Non inventory items have to appear in the same delivery document as the inventory items
- we cannot create those non-inventory items in inventory as they cannot appear in any stocktake
- the picklist doesn't accept to release non-inventory items for picking
Any idea ?
Fabrice

Hi Fabrice,
Just an idea. Will it work if you create the non-inventory items in your item master data as just a sales and purchasing item, but not an inventory item? That way you can include it along with your inventory items without having any impact in your stocks. One issue is that the non-inventory item will not be shown in your pick and pack, but you can print a copy of your sales order as a pick list.
Gavin

Formatted Search - Calculate GP Base Price for Non Inventory Items

Hi Experts,
On one of our customer's 8.8 PL 15 installation, requirement was to calculate GP for Non Inventory Items (on SO screen). Since SAP does not automatically calculates it we proposed and implemented following solution.
1. Have all Non Inventory Items to be costed at Standard cost so that you can manually enter the cost in the Item Master.
2. Write following formatted search on GP Base Price field so as to calculate the GP Base Price for the Non Inventory Items only. The formatted search must not make any changes to Inventory Items as we want system to calculate the GP automatically (just in case cost changes from SO to Delivery or Invoice).
DECLARE @II AS nVarchar(1)
DECLARE @COST AS Numeric(19,2)
SET @II = (SELECT OITM.InvntItem FROM OITM WHERE OITM.ItemCode = $[RDR1.ItemCode])
SET @COST = (SELECT (OITW.AVGPrice * $[RDR1.NumPerMsr]) FROM OITW WHERE OITW.ItemCode = $[RDR1.ItemCode] AND
OITW.WhsCode = $[RDR1.WhsCode])
IF (@II = 'N')
BEGIN
SELECT @COST
END
3. Formatted search achieves what was originally required however if a user overwrites the Item Code (Inventory Item) in the SO then above formatted search clears the GP Base Price field and sets the GP basis for the item as "Manual". By obverwrite means user first selected item A0001 on line 1 and then entered A0002 on same line i.e. Line 1.
My question here is what is wrong in the formatted search that is resulting in this behaviour.
Any questions please let me know.
Thanks in advance.
Regards
Devinder

Hi Gordon,
Thanks for taking out time to help me however Key requirement here is
Write formatted search on GP Base Price field so as to calculate the GP Base Price for the Non Inventory Items only.
Your query sets the base price for GP Base Price for Inventory Item to ZERO and Base Price By to Manual.
Note that my Formatted search has a problem only when an Inventory Item line is overwritten. I am not sure if this is a problem with SAP itself rather than my query.
Any other ideas please?
Regards
Devinder

Default setting for non saleable item for sales order

Similar Messages

Maybe you are looking for