Problem with Desktop InnerPage(Deleted).

Hi all,
One my team member deleted desktop innerpage from default frameworkpage. They deleted from source object, so it deleted from child frameworkpage page too. Now I have to restore the desktop innepage. Is there any way.
Regards
Keerthi

Hi
Thanks a lot for replies, but my problem is due to desktop innerpage is deleted, I can only see TLN,Masthead. Whatever is there is desktop innepage is not showing. So I cannot do anything from portal. If i try to launch innepage or frameworkpage from browser it is giving runtime exception. I cheked the logs, lod says Iview not found pcd:portal_content/com.sap.pct/every_user/general/com.sap.portal.frameworkpage.
I am looking for what to do from here
Regards
Keerthi

Similar Messages

I have problems with activation, after delete mi Iphone from Icloud.

I have problems with activation, after delete mi Iphone from Icloud.

Hello Sikiz 21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Best of luck,
Mario

Strange problem with desktop

Hi, I have a very strange problem with desktops and dashboards something else. For example, when I am on desktop 2 and i go to desktop 1, when I click with the mouse on it, it goes again to desktop 2. or when I am on desktop 1 and I go to ddashboard, it returns again to desktop 1 when i click to something in the dashboard.
but, if i am on desktop 3, and i go to desktop 1 throguh desktop 2, there is no problem. the same if i go from desktop 2 to dashboard.
I hope i've been clear enough to let you understand this... explanation =P
Anyone can help?

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problem with Desktop sync with Torch 9810

I recently acquired a Torch 9810 (upgrading from a Curve 8900).
Sometimes, when I try to sync the Torch using my Macintosh (OS 10.6.8) I have the following problems:
1. When backing up calendars the desktop software warns me that if I continue 487 entries will be deleted on my desktop computer. But I have the Blackberry and my Mac iCal program set so as not to delete old files. There seems not to be an option just to update the Blackberry and leave my desktop computer alone. The choice seems simply to sync or not to sync. How can I ask Blackberry Desktop to modify my handheld device ONLY?
2. If I try to cancel a "sync" functions, sometimes the program just hangs, then I have to use "Force Quit."
3. Then when I reconnect the Blackberry the Mac OS tells me the Blackberry memory is corrupted and I should re-format the disk.
I did not have this problem with my Curve 8900. What is happening? How can I prevent this from happening again?
Eric

hello,
there is an article in the public knowledge base :
http://www.blackberry.com/btsc/KB14924
"Error Encountered 0x8004FD2B, Check Documentation"
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Problem with creating and deleting row in table

Hi
I'm using JDev11.1.1.2.0. I have a table "A" with primary key X -> CHAR(1). I have created Entity and ViewObject (with the primary key X).
I created an editable Table with CreateInsert and Delete actions.
When I click Insert, a new record is added and I enter some data. Then I move selection to some other row, and return back to the new row. When I press Delete, It does not delete the new row, but the previous one selected.
In the console, when I navigate back two the new added record: <FacesCtrlHierBinding$FacesModel><makeCurrent> ADFv: No row found for rowKey: [oracle.jbo.Key[null ]].
I tried the same scenario with a different table, that has RowID as a primary key and it works correctly.
Any Idea why this is happening ? I suppose it's connected somehow with the primary key.
Thanks
agruev
Edited by: a.gruev on Nov 26, 2009 9:47 AM

I changed my entity: unchecked the X column to be primary key added RowID as a primary key. Now it works.
What's wrong with my CHAR(1) as a primary key ?
I also tried to add a Refresh button:
<af:commandButton text="Refresh" id="cb3"/>and in the table add a partialTarget to the button. Now when I add new row and press the Refresh button - then it works.
So it seems that the problem is when I add new row and enter data, the table is not refreshed and the row is missing it's primary key.
Any solutions?
Edited by: a.gruev on Nov 26, 2009 4:18 PM

Problem with desktop aplication

Hello, I have a problem with logging in creative cloud desktop applications.
when I enter an Adobe ID and password, so do not register the application and return me back to re-enter your username and password, and so forth ..

http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

Problem with multi row delete

Hi, I'm new in apex and I tried to build master detail report on some view. Everything is cool but "delete checked" doesn't work.
"ORA-20001: Error in multi row delete operation: row= , ORA-06502: PL/SQL: numeric or value error: NULL index table key value,"
the problem is that I don't know what is wrong :), I have a special trigger "instead of delete on MY_VIEW", but in this error problem is not explained.
Anybody knows what can be wrong? It is probably a problem with trigger or multi row doesn't work with views? I couldn't find how MRD knows what kind of statement use to delete rows so I don't know if the statement that program used is correct. In debug it lokks that:
0.32: ...Do not run process "ApplyMRU", process point=AFTER_SUBMIT, condition type=REQUEST_IN_CONDITION, when button pressed=
0.32: ...Process "ApplyMRD": MULTI_ROW_DELETE (AFTER_SUBMIT) #OWNER#:MY_VIEW:ITEM1:ITEM2
0.33: Show ERROR page...
0.33: Performing rollback...
thanks for any help
//sorry for english mistakes
edit: it doesn't matter if I use in trigger delete from ... where item1=:OLD.item1 ; or if I use item1=:P4_item1 (which actually saves correct values)
Edited by: user5931224 on 2009-06-13 08:55

I realised that this is not a problem with trigger, I changed trigger to "NULL;" and problem is the same. Maybe sb used master detail on view not only on tables and know what can be wrong in this situation?

Problem with a mass delete operation

Hello,
This questions concerns Oracle v10g.
A table is used to record user login information and other connection related details such as IP address, date of connection, time of login, time of logout etc. from a web-based application.
This table becomes quite large (3 million records+) and is purged once per month of all records older than 3 days old.
The purge is done with a simple delete based on the date of connection CDAT and the column DISX (disconnection=True/False)
DELETE FROM LOGTAB where CDAT < sysdate-3 and DISX='T';The columns CDAT and DISX are indexed. This delete operation can tale up to 10 minutes.
Sporadic problems arise during this delete operation when users connect or disconnect : for those users trying to disconnect, the resulting UPDATE operation on the table currently being deleted seems to hang.
For the users trying to login, there can be a delay (as the INSERT is in suspense). In the worst case all sessions become blocked until the DELETE is finally commited thus rendering any connection impossible for the duration.
There is no conflict between the data being deleted and the data being UPDATED or INSERTED.
The DELETE should only lock the rows that match the WHERE clause, so where is the contention arising from? Could this be index contention?
Is there a better way to manage such mass deletes on such high transaction tables? Partitions?
Thank you in advance.

Have you considered partitioning this table? It would of course depend on whether most queries are looking at the columns you mention, but it would mean you could truncate the partitions older than 3 days ...
create table LOGTAB
(   cdat        date not null,
    disx        varchar2(1) not null,
    col1        varchar2(100)
PARTITION BY RANGE (cdat)
SUBPARTITION BY LIST (disx)
SUBPARTITION TEMPLATE
    (   SUBPARTITION sptn_T VALUES('T'),
        SUBPARTITION sptn_Default VALUES(DEFAULT)
(   PARTITION ptn_20110808 VALUES LESS THAN (TO_DATE('09/08/2011','dd/mm/yyyy')),
    PARTITION ptn_20110809 VALUES LESS THAN (TO_DATE('10/08/2011','dd/mm/yyyy')),
    PARTITION ptn_20110810 VALUES LESS THAN (TO_DATE('11/08/2011','dd/mm/yyyy')),
    PARTITION ptn_20110811 VALUES LESS THAN (TO_DATE('12/08/2011','dd/mm/yyyy')),
    PARTITION ptn_MaxValue VALUES LESS THAN (MAXVALUE)
insert
into
    LOGTAB
SELECT
    TO_DATE('08/08/2011','dd/mm/yyyy'),
    CASE
        WHEN mod(rownum,2)=0 THEN
            'T'
        ELSE
            'S'
    END,
    'Blah'
FROM
    dual
CONNECT BY
    LEVEL <= 10
insert
into
    LOGTAB
SELECT
    TO_DATE('09/08/2011','dd/mm/yyyy'),
    CASE
        WHEN mod(rownum,2)=0 THEN
            'T'
        ELSE
            'S'
    END,
    'Blah'
FROM
    dual
CONNECT BY
    LEVEL <= 10
insert
into
    LOGTAB
SELECT
    TO_DATE('10/08/2011','dd/mm/yyyy'),
    CASE
        WHEN mod(rownum,2)=0 THEN
            'T'
        ELSE
            'S'
    END,
    'Blah'
FROM
    dual
CONNECT BY
    LEVEL <= 10
insert
into
    LOGTAB
SELECT
    TO_DATE('11/08/2011','dd/mm/yyyy'),
    CASE
        WHEN mod(rownum,2)=0 THEN
            'T'
        ELSE
            'S'
    END,
    'Blah'
FROM
    dual
CONNECT BY
    LEVEL <= 10
SQL> select * from logtab where cdat=to_date('08/08/2011','dd/mm/yyyy');
CDAT      D COL1
08-AUG-11 T Blah
08-AUG-11 T Blah
08-AUG-11 T Blah
08-AUG-11 T Blah
08-AUG-11 T Blah
08-AUG-11 S Blah
08-AUG-11 S Blah
08-AUG-11 S Blah
08-AUG-11 S Blah
08-AUG-11 S Blah
SQL> select table_name,partition_name,subpartition_name from user_tab_subpartitions;
TABLE_NAME                     PARTITION_NAME                 SUBPARTITION_NAME
LOGTAB                         PTN_20110808                   PTN_20110808_SPTN_DEFAULT
LOGTAB                         PTN_20110808                   PTN_20110808_SPTN_T
LOGTAB                         PTN_20110809                   PTN_20110809_SPTN_DEFAULT
LOGTAB                         PTN_20110809                   PTN_20110809_SPTN_T
LOGTAB                         PTN_20110810                   PTN_20110810_SPTN_DEFAULT
LOGTAB                         PTN_20110810                   PTN_20110810_SPTN_T
LOGTAB                         PTN_20110811                   PTN_20110811_SPTN_DEFAULT
LOGTAB                         PTN_20110811                   PTN_20110811_SPTN_T
LOGTAB                         PTN_MAXVALUE                   PTN_MAXVALUE_SPTN_DEFAULT
LOGTAB                         PTN_MAXVALUE                   PTN_MAXVALUE_SPTN_T
10 rows selected.
SQL> alter table logtab truncate subpartition PTN_20110808_SPTN_T;
Table truncated.
Elapsed: 00:00:00.03
SQL> select * from logtab where cdat=to_date('08/08/2011','dd/mm/yyyy');
CDAT      D COL1
08-AUG-11 S Blah
08-AUG-11 S Blah
08-AUG-11 S Blah
08-AUG-11 S Blah
08-AUG-11 S Blah
Elapsed: 00:00:00.00Not sure if it's suitable for you or not but it could be an option...
HTH
David

Volume problem with Desktop Theatre 5.1 DTT2200

Hi,
I'm experiencing problems with my Desktop Theatre 5.1 DTT2200's volume. It goes up and down with no sense. Doesn't matter if I'm watching a movie, listening to music, playing games or whatever. The speaker system is connected to a SB Live! Sound card but even if I disconnect it and I use the onboard sound plugs it is still happenning the same problem.
Can anyone help me with this?
Thanks in advance!

I Have the same problem, really a shame cause the soundquality is very good, but if i have too keep adjusting the volume it's not really serving it's purpose.
The potmeter of the volumecontrol is malfunctioning. You could try disasssembling it and clean it but that didn't work for me till yet. Best is to replace the potmeter but it is impossible to find a replacement. I'm told it's a very (too) cheap component unsuitable for frequent use so i think Creative shouldn't had used it in the first place. I'm told it's a ct. component fot the far east.
I contacted Creative but they can't supply me with a substitution, either a potmeter or volumecontrol.
The volume control can't be found elsewhere because Creative designed their own connector i think.
Guess i have to annoy the crap out of myself before i buy another set.

Timezone problem with Desktop 6.2 calandar and outlook 2007 after HotSync

After recently being upgraded to Desktop 6.2 I have a problem with Hotsync Palm-calendar and outlook 2007.
When I create a new appointment in outlook 2007 and next do a HotSync it is stored in PalmTungsten-E2 calendar with a timezone CEST (=2 hours earlier than it should be).
At least I won't be late for these appointments, but its a bit annoying.
I already tapped and untapped the box -New events use time zones- in the Calendar Preferences, but that does not help.
Louis
Post relates to: Tungsten E2
This question was solved.
View Solution.

Thanks Colapop for you suggestion.
I had already tried that option and it gave no good result.
Yesterday I bought KeySuite from Chapure and now everything works fine again.
I do regret a bit I upgraded to PalmDesktop 6.2 because that was the start of my problems. The reason for updating to 6,2 was that I wanted to make use of outlook 2007 instead of palmCalender.
Cheers
LouisK100

Problems with contacts getting deleted after software upgrade!

Somehow, my IPhone 4s had a software upgrade, and it DELETED contacts. Anyone else have a problem with this???? UGH!
I had a thunderbolt before my IPhone, and my contacts were saved to the verizon back up assistant. They are now nowhere to be found!

If you were already using iOS 5 where you using the iCloud feature to back up your device? If so, you should be able to retrieve your contacts. If you just upgraded to iOS 5 where you backing up your device on your computer via iTunes? You were advised to complete a backup prior to proceeding with the software update...if you did so then a copy of your back up should be available in iTunes. Try looking at the following link to see if it helps:
http://support.apple.com/kb/ht1414
If you did not do a backup and you were not using iCloud to do backups then you would need re-sync your contacts from another source...did you use a contact manager on your computer (such as Outlook)? If you did then you can retrieve your contacts from there. Try looking at this link to see if it helps. If it is not the correct one you can do a search on that site to find the article that better fits your needs.
http://support.apple.com/kb/PH1674

Problems with desktop/app sharing/viewing through conference

We have a problem with viewing shared desktop/app with external contacts in a conference. We're able to share/view desktop/app directly with an external users, but not in a conference. We get the error message: "Sharing failed to connect due to network
issues. Try again later."
If we're using the web app on the same computer where we have the problem, we're able to view the content in the conference.
It's working fine internally, it's also working fine when users are outside of our office.
All other functions in Lync are working fine.
We have 1 standard Lync server and 1 Edge, we don't have a reverse proxy but multiple IPs with port forward to corresponding ports on each server.
How does the Lync client connect the shared content?

To Fix your issue, you can follow below steps
A common root cause for this error occurs when required ports are not available. Begin troubleshooting by verifying required ports.
Public --> Edge server:
TCP/443
UDP/3478
TCP/50,000-59,999 (Outbound only)
Determining External A/V Firewall and Port Requirements
Topologies for External User Access
From the Front End pool to the internal Edge:
TCP/5062
TCP/443
UDP/3478
From the internal Edge to the Front End Pool:
TCP/5065
TCP/49152-65335 (Inbound/Outbound)
Ports and Protocols for Internal Servers
From the internal Client to the internal Edge:
TCP - 443
UDP – 3478
Also you can refer below link
http://blogs.technet.com/b/nexthop/archive/2012/11/05/lyncmd-troubleshooting-lync-server-2010-application-sharing-internal-and-remote-scenarios.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Problem with network after deleting NIC teaming.

We have server HP ProLiant DL360p Gen8 with Windows Server 2012. Couple months ago I created a team NIC Teaming (use 2 network interfaces, the other 2 are disable and not connected). Also NLB (Network Load Balancing) feature was installed
but not configure (I think it is important). IIS and MS SQL 2012 Express were installed too and anything else
Now I need delete team NIC Teaming and use network interfaces separately (with different IPs but the same network 192.168.1.0). When I delete team and configure IPv4 with static IP (we don't have DHCP) network does nor work. Because there is no default gateway
in IPv4 properties. It is problem and I don't know how fix this. When I recover team NIC Teaming - all OK. I checked registry and Gateway is in Interfaces (HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\<Adapter
GUID>)
I uncheked NLB in network adapter's settings.
I did
netsh interface ip reset
I checked Route Print - 0.0.0.0 to 192.168.1.1 is present in single copy.
I reinstalled drivers network adapter - it fixed problem before restart. After restart the problem recovered :)
I don't know what should do next.. I cannot resetup OS. Could you please help with this, please. And sorry for my English.
Best regards,
Alex.

Hi ,
After this please try to check the protocol which bounded properly .
If it is normal and still can not access outside as you mentioned above , please try to open the device manager -->
view --> show hidden devices --> then try to remove all the devices under network adapters
(I would recommend you to note the driver files' path in the properties of physical NIC in device manager --> tab
driver --> driver details , try to delete the file after remove the NIC in device manage )
Then restart your computer , install your NIC driver and retry .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Well, I fixed problem finally. :) I deleted all network adapters in device manager with driver file. Than I restarted server and Windows Server setuped Microsoft driver. After that all work! I tried to setup HP driver and problem comes back. I can
conclude that the problem is in the driver manufacturer. Thanks for all and good luck.

Problems with 0EMPLOYEE and deleted employees

I have 10 employees who's data records have been deleted from the ECC system because they were entered in error. However they remain in the 0EMPLOYEE info object with an "Active" status even after doing a full load of 0EMPLOYEE from ECC. This is throwing some reports off as BW thinks these employees are still active. What is the correct way to handle this problem?

You can delete them manually. If they were created by error it won't be transactional data for them.

Problem with Desktop InnerPage(Deleted).

Similar Messages

Maybe you are looking for