Default values on selection screen of a SAP Query

Hello,
I have a selection screen which is designed in SAP Query.
How to get default values for the fields on selection screen.
Regards,
Satya

hi....
you can go with following type of code..
ITS A TESTED CODE AND WILL SERVE YOUR PURPOSE
tables: sflight.
data: t_table like standard table of sflight.
select-options:
   s_carrid for sflight-carrid.
parameters:
p_fldate type d.
initialization.
p_fldate = sy-datum - 7.
s_carrid-sign = 'I'.
s_carrid-option = 'BT'.
s_carrid-low = 'AA'.
s_carrid-high = 'LH'.
append s_carrid.
start-of-selection.
select carrid
          connid
          fldate
from   sflight
into corresponding fields of table t_table
where carrid in s_carrid
and fldate < p_fldate.

Similar Messages

How to pass a default value in selection screen of logical database pnpce

Dear All,
Can any one tell me how to pass a default value in selection screen of logical database pnpce .
Regards
Rakesh Singh

Hi Rakesh,
Go to SE36 (logical database Builder).First enter PNPCE in Logical Database and press documentation,here you will get the details of exactly what is PNPCE and how it works.After that select selections in subojects in se36 only and enter display ,there you have the include from where you acn get the idea.
Regards,
Rahul

Default value on Selection Screen

Hi experts,
I want to put sy-datum + 1 as a default value on selection screen.
I tried this but it didnt work. Please help me.
DATA : tarih like sy-datum.
initialization.
tarih = sy-datum + 1.
SELECTION-SCREEN BEGIN OF BLOCK 3 WITH FRAME TITLE TEXT-002.
parameters : h_tarih like sy-datum obligatory default tarih.
SELECTION-SCREEN END OF BLOCK 3.
Thanks

Hi,
Do it in INITIALIZATION event.
SELECTION-SCREEN BEGIN OF BLOCK 3 WITH FRAME TITLE TEXT-002.
parameters : h_tarih like sy-datum obligatory default tarih.
SELECTION-SCREEN END OF BLOCK 3.
INITIALIZATION.
h_tarih = sy-datum + 1.
In this case no need to have one more extra variable. U can directly assign to ur parameter.
In data declaration u can only default hard coded values. But not calculated values. This is because first selection screen will be triggered and later ur calculations. So at the time of selection screen is triggered ur variable dont have any value. Thats why it was not working. Change ur code to like above. It will work fine.
Thanks,
Vinod.
Edited by: Vinod Reddy Vemuru on Jun 27, 2008 12:37 PM

Default value for selection screen field

Hi all,
I am using LDB PNPCE. I want to give default value for field Personnel area on selection screen.
How can I do it?
Thanks
Rahul

Hi Rahul,
In the INITIALIZATION event we can set the default values for selection screen fields.
INITIALIZATION.
loop at screen.
if screen-name = 'S_MATNR-LOW'.
CLEAR S_MATNR.
s_matnr-low = '1234'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr.
CLEAR S_MATNR.
s_matnr-high = '5678'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr
clear s_matnr.
endif.
endloop.
Hope it helps.
Mark if useful
Regards,
Saumya

How to get default values on selection screen(multiple ranges)?

i want to know how to maintain default ranges in selection screen...like 2000 to 3000 and 7000 to 8000 and 11000 to 15000
all the above ranges must get by default how to provide those to selection screen by default...please give me idea...with example...

Hi Suresh,
You can either use select-options or Ranges. If you want the selection screen to be displayed with allwoing user to enter values apart for the default ones use select options else use ranges. With ranges what ever values use hard code would be set and the end user will not be able to add any more values (or range of values).
Simply write the following code
tables : <name of the table from which the field belongs>
select-options <fieldname> for <tablename>-<fieldname>.
<fieldname>-sign = 'I'.
<fieldname>-option = 'BT'.
<fieldname>-low = '7000'.
<fieldname>-high = '8000'.
append <fieldname>..
similiarly add all the ranges that you need to include as default and in your select statement use the IN operator inthe where clause to include the range.
If using range replacethe select-option with the range statement.
Thanks.

Set default value to selection screen for report

Hi All,
   I've a report selection screen which has 3 fields from the report category: PNPPERNR, PNPSTAT1, PNPBTRTL. My logical database is PNPCE.
   How can I set the default value to the field PNPSTAT1? Means when I first display the selection screen, the value for this field will automatically display '3' in it.
   Hope someone can help me on this.
Thanks.

Hi All,
   Thanks for reply. But I think I should declare my question clearer.
   Actually it's not a parameter.
My problem is when using the logical database, if you define a TABLES: PERNR, then you can see the SAP standard report selection screen. So my selection screen has 3 standard fields which are PNPPERNR, PNPSTAT1, and PNPBTRTL.
   I need to set the default value '3' to field PNPSTAT1.
Thanks.

Default value in selection screen in display mode

Hai Friends,
In my selection screen i have a parameter PA_LEVEL, this should have a default value as 10 but it should not be in the change mode. i want that to be in the display mode as in FAGLL03 ( Ledger value ).
how can i do this.
Moderator message - Please do not ask such basic questions. This can easily be answered by searching the forum.
Edited by: Rob Burbank on Apr 16, 2009 12:18 PM

Hi,
Use LOOP AT SCREEN...ENDLOOP. in the AT SELECTION-SCREEN OUPTUT event to disable the input field.
LOOP AT SCREEN.
IF screen-name CS 'FIELDNAME'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.

Assign default values in selection screen of CM21

Hi experts,
Our case is that, in CM21 selection screen, default value to the field "Plant" is appeared. W are sure that it is not because of configuration settings but not able to find why it is appearing by default. Please let us know. Thanks in advance.

Dear
Please check this thread which I have posted earlier ; CM21/cm25 sorting of user defined field in table area
Want a change in lau out in CM21
Regards
JH

Personalization and Default values in selection screen variables

Hi everyone,
I have certain questions regarding Front end part:-
1)     Can we have multiple personalizations for a single user in Web templates; I know it is quite possible in BEx using Variants. Is there any such approach or any other solutions regarding it?
2)     In our project we had a range selection screen customer exit variable on 0CALMONTH, which is showing a default value of 07.2007 to 09.2007, although we have removed the default values from the query variable and also checked the customer exits where it is used, but still its showing the value. We cant delete and recreate the variable as such, as it is used in number of function module. Also these values are also transported to Quality system, where also its showing the same value.
Did anyone face such a situation before?
Eagerly waiting for a solution.....
Thanks in advance

Hi Chiran,
Please try with following approach for multiple   personalizations for a single user in Web templates.
While Defining Variable Choose the Option Copy personalization data from variable .
The Features of above approach is as follows.
1)It will personalize variable values for Input Variables for each user.
2)These values are saved for each variable as well as for user.
3) At the time of defining variable it will allow us to enter one or more default values.All these values are appear in the variable screen when u execute the query or Web Application.
So you can see the variable values in web also.Just try with this approach.
May be it will resove u r issue some extent.
Regarding u r Second Query Just try with Some tables, all the default values entries were saved in those tables. Delete default values from those entries.
Thanks & Regards,
Chandu.

Default value in Selection-screen

Hi,
Am using Email address as a parameter on Selection-screen.
like
PARAMETERS:p_addr type AD_SMTPADR.
it works fine but problem is:
now i want to fill it by-default in selecrion-screen as login user id's email address.
how can i achieve that?
Amit.

Hi,
PARAMETERS:p_addr type AD_SMTPADR.
Write the code in Initialization
INITIALIZATION.
p_addr = abc at xyz.com
Reward points if helpful.

Default values in selection screen

hI, EXPERTS
Requirement is :
1) in selection screen input = "werERT" , output = "werERT".
normally, it will give "WERERT".
2) in selection screen input = "werert" , output = "werert".
normally, it will give "WERERT".
1) in selection screen input = "WERERT" , output = "WERERT".
normally, it will give "WERERT".
I NEED THE SAME TEXT AS IN THE INPUT SELECTION SCREEN FIELD.
THANKS AND REGARDS

Hello dasr,
There are 2 options for this
If u want to do it programaitcally
PARAMETERS : Smeoutpt(10) TYPE C LOWER CASE.
WRITE Smeoutpt.
If u want to do it at data element level , do it as MR.Rammohan has suggested .
But decide it according to your requirement
Note: If you do it at data element level it will be changed at all places .
Regards,
K.Sibi

Get selection screen parameters from sap query

Hello. I use SAP Query Reporting, so I added a report assignment for detailing (sq01 -> Change button -> Goto -> Report Assignment -> Insert row -> Other type row -> Abap Report Program)
and put there ABAP program.
When I run query and press CtrlShiftF1 (or double click) It calls my abap program.
So the question is: how to get selection screen parameters in my program ?
to be more precise I want to get date parameter (begda, endda)
Thanks a lot.

There is a Z query which I can see in sq01. I set reporting period and run the query; when I run it, it gives me the employee list.
So I wrote the abap report to get an employee details, customized query as I mentioned above.
The query calls my report and I need to get parameters.
SELECTION-SCREEN BEGIN OF BLOCK frm1 WITH FRAME TITLE text-001.
PARAMETER : p_pernr LIKE p0001-pernr OBLIGATORY MATCHCODE OBJECT prem.
PARAMETER : p_date LIKE sy-datum.
SELECTION-SCREEN END OF BLOCK frm1.
Parameter
p_pernr
passes normal. ALV Query contains it, but I'd like to get one more parameter from selection screen of the query and don't know how to get it.

Selection screen fields in SAP Query

HI friends,
I have to make the seletion screen field as mandatory in SAP-Query.
Please let me know the procedure to make field as mandatory or Let me know how to validate the selection-screen field in Query.
Thanks in Advance,
Ravi

Go to SQ02
Select your Infoset-->Change
On next Screen.
Select GoTo->Code->Initialization.
Write there code
LOOP AT SCREEN.
IF screen-name EQ 'SP$00004'.
screen-required = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.

How to set default value in select option for ABAP query

Hi experts,
What is the way to set up default values for select-options in ABAP query.
e.g.
I have one field 'Year' in my ABAP query selection screen.
I want value of current year to be appeared here whenever user execute report
Thanks in Advance
-Harkamal

Hi Harkamal,
execute your Query via SQ01. On Selection-Screen
goto save Variant. Mark your field
as selection variable an press Button election variable.
Take variable from TVARV and use it.
Than save the Variant.
Look at TVARV if the 'Year' is updated to the actualYear!
regards, Dieter

How to get values of selection screen fields in the POV event

I have two radio buttons r1,r2 and a field file_name on selection screen.
I have written At selection screen on value-request for the field file_name. Based on the selection of radio buttons I have to display different screens when f4 for field_name is pressed.
Unfortunately the values of r1 or r2 are not populated in the AT selection screen on value-request event.
Can any one tell me if there is a way to obtain the values of r1 or r2 in the AT selection screen on value-request event.

Hi..
Try out this.
REPORT ZH_TEST4                                .
CONSTANTS : c_x                TYPE char01 VALUE 'X',
            c_rg1(4)        TYPE c      VALUE 'RG1',
            c_gr2(3)        TYPE c      VALUE 'GR2',
            c_gr3(3)        TYPE c      VALUE 'GR3',
            c_zero          TYPE n      VALUE '0',
            c_neg(2)        TYPE c      VALUE '-1'.
data: w_sscrfields_ucomm1   TYPE sscrfields-ucomm.
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS       : p_back   RADIOBUTTON GROUP rg1
                                 USER-COMMAND pc,
                   p_fore   RADIOBUTTON GROUP rg1
                                      DEFAULT 'X'.
SELECTION-SCREEN : END OF BLOCK blk1.
SELECTION-SCREEN : BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS : p_phif LIKE rlgrap-filename MODIF ID gr2,
             p_ahif LIKE rlgrap-filename MODIF ID gr3.
SELECTION-SCREEN : END OF BLOCK blk2.
AT SELECTION-SCREEN OUTPUT.
IF p_fore EQ c_x.
    w_sscrfields_ucomm1 = c_rg1.
ELSE.
    w_sscrfields_ucomm1 = space.
ENDIF.
LOOP AT SCREEN.
    IF w_sscrfields_ucomm1 EQ space.
      IF screen-group1 = c_gr2.
        screen-active = c_zero.
      ENDIF.
    ELSE.
      IF screen-group1 = c_gr3.
        screen-active = c_zero.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
also try out function module POPUP_WITH_TABLE_DISPLAY.
Plz reward points if this helps by clicking on star!1
Good Luck!!
Cheers,
Rajeev

Default values on selection screen of a SAP Query

Similar Messages

Maybe you are looking for