Default versions are not working on BPEL 10.1.3.3

Hi All,
We are on Oracle SOA 10.1.3.3
We have multiple processes with multiple versions deployed and all of them are activated.
But when we call a BPEL process from another BPEL then version being called is changing from one instance to another instance
Example
We have following versions of BPELProcess1 deployed
BPELProcess1(v.1.2)
BPELProcess1(v.1.3)
BPELProcess1(v.1.4)
BPELProcess1(v.1.5) (this is default version)
When we call BPELProcess1 from BPELProcess2, following are invocations happend during runtime
BPELProcess2 =>BPELProcess1 (v.1.4)
BPELProcess2 =>BPELProcess1 (v.1.4)
BPELProcess2 =>BPELProcess1 (v.1.3)
BPELProcess2 =>BPELProcess1 (v.1.5)
If we carefully check above invocations,It has invoked different versions of BPELProcess2 for different invocations.
There is no version hard coded in bpel.xml of BPELProcess2
bpel.xml of BPELProcess2
<partnerLinkBinding name="SxF_Design">
<property name="wsdlLocation">http://server.domain:7777/orabpel/default/BPELProcess1/BPELProcess1?wsdl</property>
</partnerLinkBinding>
This must be a bug.
Thanks,
Praveen

Try the following steps.
1. Open Anyconnect and try to connect through it.
2. after you receive a failure message, delete anyconnect from background.
3. now remove anyconnect from the device
4. download a fresh version of anyconnect
5. Try to connect again.
Step 2 is important. That is what resolved my issue.

Similar Messages

After updating my iPod touch 3rd generation to IOS5 some default apps are not working (anymore)

Hi,
I updated my iPod touch 3g from IOS 4.x to IOS 5 last week and since then my iPod makes troublle!
First of all, during the update I did not see any Problems. After the update, I mean the step where the data will be restored to the iPod, I synchronized some APPS at the same time, maybe that was a big mistake. My iPod makes hard resets many times in a loop until it frozes.
So the only thing I could do here is pressing the home button and the power switch at the same time until it gets rebooted. The sync started again and it looked like everything runs fine.
As I tried to use iMessage first time I realised the first Problem: I am unable to loginto iMessage with my Apple ID. My Apple ID runs fine, I can by Apps and so on. I also enabled iCloud to see that my Apple ID is ok. But logging into iMessage I put in my Apple credentials and Password, click on next, wait 3 seconds and the screen flips back. So this feature is not working.
Next issue I see is that randomly my iPod hard resets itself. Even if I don't do anything with my iPod I can see that it resets itself, booting with the apple icon. This happens minimum three times a day... (Exception Type: EXC_BAD_ACCESS (SIGSEGV), Kern_INVALID_ADDRESSat 0x00000000)
Today I tried YouTube, an internal Application which I cannot reinstall. It's not working anymore, starting YouTube says: Unable to connect to YouTube!
I have no clue whats going on here because email and web is working fine.
In my eyes I would like to reset the whole device to a state before running IOS5 and I would try the update again. But my Question is how to reinstall IOS5?
If IOS5 will not run smoothly on my iPod, I would prefer to backref to iOS4x.
Is there anyone who could help me out here?
Thanks,
Daniel

Found the rootcause. The battery was damaged and unable to have enough power to keep the device alive. After changing the device problem is solved.

HT4972 I am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.

am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.

iOS 4.2.1 is the latest version of iOS for the 3G.
Facebook and Whatsapp both require 4.3 or higher.
If you want to use those apps, either use the old version that should be in your iTunes library or upgrade the hardware to a 3GS or newer device.

My "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys arnt either? any help would be amazing!

my "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys aren't either? any help would be amazing! I use these keys a million times a hour and since I have switched to cc I cant get them to work. track selection makes no difference or if there are markers on the timeline or not.
Anyone else feel me on this?
any help?

Well that still didn't make any kind of difference. I would just do without it but I've becomes really use to it with Avid for so long. I have to admit there are a lot of small moments like this that makes me miss Avid. Any other suggestions? I have checked the keyboard shortcuts a few times and maybe I'm just missing something here...

The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

Hello,
SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
* Foundation Services
* HFM
* FDM
Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
While configuration,
1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
2) Also, I selected to configure Oracle HTTP server as web server.
Both these steps were successful.
But SharedServices and Workspace URL's are not working. Getting 404 error.
SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
Can anyone please suggest a solution for this.
####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
Thanks in advance.
Tej

Hi John,
today's update:
* Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
* During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
* Started EPM system.
* checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
* Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Can you please suggest how to overcome this error of Weblogic?
Thanks in advance,
Tej

AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

"Validation" enabled for the composite and my testsuites are not working

I have posted the below issue in Test suite in JDEV - Studio Edition Version 11.1.1.2.0 But I felt that this is the right forum, so posting this again here:
I have mediator calling bpel. Mediator is exposed as web service. Whenever I run the service using "Test" button on EM with validation turned on
then it works and the process will be completed.
But I have initiate xml in the test suites. I select "UnitTests" and select my test case xml that was associated to "Initiate Message for operation",
I see that the process is still in the "Running" state. I put in exactly the same values as I use for testing the service from EM.
Did anybody face this issue? This happens only when we turn the validation to "Enabled" in EM.
I have "Validation" enabled for the composite and my testsuites are not working. When I test using unit tests, I am only seeing "Running" status of the processes and these are not getting completed.

Hello there, RevDebMN.
The following Knowledge Base article is always a great fallback article for troubleshooting Mail issues:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Particularly useful, in your case:
Mail Connection Doctor shows one or more red dots () in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
What alert message is shown in the Mail Connection Doctor "Details" column affected account?
Click here if a "Could not connect to this (server type) server…" message appears
Click here if a "Trying to log in to this (email server provider name) account failed…" message or any other error message appears
If the issue persists, then you'll want to remove the account and then add it again using this article:
Mail (Mountain Lion): Remove accounts
http://support.apple.com/kb/PH11794
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Which XSLT versions are support by Oracle BPEL? v1.1 or v2.0?

Which XSLT versions are support by Oracle BPEL? v1.1 or v2.0?
As far as I heard v1.1 is the highest version but some functions of v2.0 are supported as well.
Is this true?
If yes: Which XSLT functions of v2.0 are supported?
Does it matter if I change the
version="1.1"
attribute in the topmost
<xsl:stylesheet......>
tag?
Which XSLT processor is built-in/used?
Peter

XSL mapper in BPEL supports 1.0 only in-built. And this is true for 11g also. However, we can declare <xsl:stylesheet version = 2.0 ... and use all xpath 2.0 functions. I have used few of them and has been successful so far. Once you declare version as 2.0 the only issue will be that XSL's visual GUI mapper will not work in JDeveloper and you will need to modify the code from the source.

CURVE 8520 - KEYS ARE NOT WORKING

Need assistance to guide as the qwerty pad, navigation and other keys are not working. when conncting the phone to laptop, the alarm confirmation appears and cannot cancel or open other file.
already restart the phone and removed the memory card but still problem occurs.
Solved!
Go to Solution.

Perfom a back up from your device information , the make an update if your device dont have any update make a force detection or just a reset of factory settings if the error continues you need a warranty replacement.
Back up steps:
For a backup of the data on a BlackBerry smartphone, complete the following steps:
    Click on Device from the upper left-hand corner of the BlackBerry Desktop Software and select Back up from the drop-down list, or simply click Back Up Now from the main screen of the BlackBerry Desktop Software.
    Mark the appropriate customization level ( Full, Quick, Custom).
    If your smartphone includes built-in media storage and you want to back up data that is stored there, select the Files saved on my built-in media storage check box.
    Input a file name if desired, or leave the default text.
    Leave the Encrypt backup file unchecked.
    Select Back up.
Update steps:
    Connect the smartphone to the computer.
    On the home screen of the BlackBerry Desktop Software, click Update.
        To download an update, click Get update.
        To view other available versions of the BlackBerry Device Software, click View other versions. If applicable, click another version. Click Install.
    Do any of the following:
        To keep a backup file of your smartphone data and settings, select the Back up your device data checkbox. This backup file is restored to the smartphone after the update is complete. If the data is not backed up, the smartphone data, settings, and email messages are deleted from the smartphone after the update is installed.
        To encrypt the backup data, click Encrypt backup file.
        Select the Keep me subscribed to email notifications checkbox to receive email updates when new versions of the BlackBerry Device Software become available.
    Click Install update.
When the confirmation message that the update is complete is displayed, the BlackBerry smartphone may be disconnected.
Force Detection :
Remove the battery from the back of the BlackBerry smartphone.
Connect the BlackBerry smartphone to the computer using a USB cable.
Once prompted to Retry, Update or Cancel, click Update. If available updates are found Desktop Manager will prompt you to Get Update, Update Later or View other versions
Click Get Update to install the recommended software version or View other Versions to manually select the version you wish to install and click Install.
In the Update Options screen there is the option to enter the email address to be notified in future when there may be new software versions available.
    fill in the checkbox and enter the email address in the text field to receive email notifications
    uncheck the checkbox and leave the text field blank to not receive updates.
Reinsert the Battery which was removed in step 1
Click Install Update
Reset Factory Settings steps:
    In the top right corner of the BlackBerry Desktop Software, click on the ? in the top right hand corner of the BlackBerry Desktop Software.
    Click Support Resources
    Then Support Tools
    Click the Reset button under the heading Reset to Factory Settings.
Any question let me know.!

Web Template - Variable & Export to Excel Web Items are not working

Hi Experts,
In a Web Report & Web Template Variable & Export to Excel Web Items are not working ; Any body have any idead ?
Do i need to write any HTML code to funtion those web items.
Thanks
KAruna

Dear Karuna,
Review your default template. Probably is 0ANALYSIS_PATTERN.
Reactive the version D and check again.
Also, you are able to modify the webitems on Export to Excel on 'BUTTON_TOOLBAR_2' -> Button list number 4.
And, you are able to check the 0ANALYSIS_PATTERN_EXPORT, in case of configuration.
If you want to remove/add new items, I suggest you to save as another name. SAP does not allow to modify delivered objects
ex:. 0Objects.
Best Regards,
Edward S. John

Text messages ringtones are not working in the Storm Two

Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon

Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L

Page Break In XML Publisher RTF Templates Are Not Working

Please refer to the Metalink Doc below:
Subject:      Page Break In XML Publisher RTF Templates Are Not Working.
Doc ID:      559111.1
Type:      PROBLEM
Modified Date:      24-MAR-2008
Status:      MODERATED
In this Document
Symptoms
Cause
Solution
References
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to:
Oracle XML Publisher - Version: 5.6.3
This problem can occur on any platform.
Symptoms
Using XML Publisher version 5.6.3 in 11.5.10.
Find <?split-by-page-break:?> syntax is ignored.
EXPECTED BEHAVIOR
Expect page breaks to occur at point set by "split-by-page-break:" code.
STEPS
The issue can be reproduced at will with the following steps:
1. Create a template.
2. Call split-by-page-break: inside a loop.
3. Output is not formatted correctly, page break call is ignored,
Cause
Unpublished BUG 5011628 SPLIT-BY-PAGE-BREAK NOT WORKING IF ADDED SORT WITHIN DYNAMIC GROUP
Unpublished BUG 5011628 matches the client issue as it is a call to split-by-page-break inside a loop.
Fix is in ScalableStringList.java version 115.4.
This is delivered in <Bug 6165466> XDOFX:CHR(N) FUNCTION FAILING.
Solution
To implement the solution, please execute the following steps:
1. Apply Patch 6165466 when it is released.
2. Test your report.
References
Bug 6165466 - XDOFX:CHR(N) FUNCTION FAILING
Keywords
XML~PUBLISHER; LOOP; DYNAMIC~GROUP; PAGE~BREAK;
Help us improve our service. Please email us your comments for this document. .

Hi JDev,
Check this out:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
Hope this might help.
Thanks

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

Some of the shortcut keys and directional keys on the keyboard are not working in FF 4 RC1 (i.e. Tab, Ctrl+C, arrow keys). They work fin in FF 3.6x and other applications.

Crtl+C, Ctrl+V, Ctrl+X, Tab, and arrow keys do not work at all in FF4.0b13 and later. I am not sure about earlier versions as this is the first version I have tried.

I found this helpful article (http://support.apple.com/kb/TS1381) and worked my way through the section "Some keys don't work as expected".
All the following functions/settings are disabled or turned off:
Text to speech / Speak selected text when the key is pressed
Slow Keys
Mouse Keys.
The keyboard viewer just confirms my list of keys that are not working.
Starting in safe mode makes no difference; nor does booting from the Mac OS X Install Disc and running Terminal from the Utilities menu. The same keys as before fail to work.
This seems to confirm that it's a hardware issue. Anyone have any suggestions?

Default versions are not working on BPEL 10.1.3.3

Similar Messages

Maybe you are looking for