Delete attachment from master data
Hello,
I need to delete .pdf file from attachment list of one material but there is no delete button. How could I delete it?
Thank you
click the right hand side of the icon( services for object), where you attached the document
click the attachment list, select the attached file you want to delete and click delete icon in MM02
or
in menu click system-->service for object in MM02
Click the attachment list icon next to the create icon select the attached file you want to delete and click delete icon
Edited by: Sundaresan . E. V on Oct 2, 2010 9:14 PM
Similar Messages
-
No delta's for DTP from master data object to Info Cube
Hello,
I have a DTP process that updates records from master data attributes to Info cube.
Here i am not able to schedule a DTP in delta mode. The option appears in display mode.
Even though when i tried deleting the FULL update DTP and created a new DTP, the delta option is in display mode. i have deleted all requests from my info cube.
Any idea or solution !!
Thanks
AnkurAnkur,
If you want load Master Data DELTAs to Cube, you can achive this by introducing a DSO before Master Data Infoobjects.
Assume your Dataflow....
Master Datasource
|
|
|
Master Data Infobjects
|
|
|
Cube
New Dataflow:
Master Datasource
|
|
|
|-------DSO---------|
| |
| |
Cube Master Data Infobjects
Hope this helps.
Nagesh Ganisetti.
Assign points if it helps. -
Start Routine to Populate Account Group Field from Master data of 0Customer
Hello Friends. Please help me edit this ABAP code to make it work. I am putting this code in start routine in between two DSO. where I am using the
Start Routine to Populate Account Group Field from Master data of 0Customer. I do not want to use read from master data functionality since that field 0customer is not there in dso but similar field 0debitor is there. so i want to put this code
during the load from source DSO to Target DSO.
Error Explicit length specifications are necessary with types C, P, X, N und
DATA: L_S_DP_LINE TYPE DATA_PACKAGE_sTRUCTURE.
types: begin of comp,
CUSTOMER type /BI0/OICUSTOMER,
ACCNT_GRP type /BI0/OIACCNT_GRP,
end of comp.
DATA: l_S_comp type comp.
DATA: L_th_COMP TYPE HASHED TABLE OF COMP WITH UNIQUE KEY customer INITIAL SIZE 0.
IF L_th_COMP[] IS INITIAL.
SELECT CUSTOMER ACCNT_GRP FROM /BI0/PCUSTOMER APPENDING CORRESPONDING FIELDS OF TABLE L_th_COMP.
ENDIF.
LOOP AT SOURCE_PACKAGE INTO L_S_DP_LINE.
READ TABLE L_TH_COMP INTO L_S_COMP WITH TABLE KEY CUSTOMER = L_s_DP_LINE-CUSTOMER
IF SY-SUBRC = 0.
L_S_DP_LINE-/BIC/ACCNT_GRP = L_S_COMP-/BIC/ACCNT_GRP.
MODIFY SOURCE_PACKAGE FROM L_S_DP_LINE.
ENDIF.
ENDLOOP.
soniya kapoor
Message was edited by:
soniya kapoorHello Wond Thanks for Good Answer and good option, But Client does not like this option and does not like Nav Attribute so he does not want to turn on any Nav Attribute, In general also We hav requirement to read a third table while uploading 1 dso table to 2 dso table,
so Please help me edit this ABAP code to make it work. I am putting this code in start routine in between two DSO. where I am using the
Start Routine to Populate Account Group Field from Master data of 0Customer.
No syntax Error But during the load it is updating the source table and not the target table. how to define now target table.
***SOURCE DSO Table
types: begin of typ_tgl1.
include type /BIC/AZDAFIAR000.
types: end of typ_tgl1.
types: begin of comp,
CUSTOMER type /BI0/OICUSTOMER,
ACCNT_GRP type /BI0/OIACCNT_GRP,
end of comp.
DATA: L_th_COMP TYPE HASHED TABLE OF COMP WITH UNIQUE KEY customer
INITIAL SIZE 0.
data: wa_itab type COMP.
data: wa_zdtg type typ_tgl1.
IF L_th_COMP[] IS INITIAL.
***Master Data Table
SELECT CUSTOMER ACCNT_GRP FROM /BI0/PCUSTOMER APPENDING CORRESPONDING
FIELDS OF TABLE L_th_COMP.
sort L_th_COMP by CUSTOMER.
ENDIF.
LOOP AT L_th_COMP into wa_itab.
select * from /BIC/AZDAFIAR000 into wa_zdtg
where DEBITOR eq wa_itab-CUSTOMER. *** SOURCE DSO Table
IF SY-SUBRC = 0.
wa_zdtg-ACCNT_GRP = wa_itab-ACCNT_GRP.
MODIFY /BIC/AZDAFIAR000 from wa_zdtg. *** modify SOURCE DSO Table
ENDIF.
endselect.
endloop.
soniya kapoor -
Currency translation - not picking up currencies from master data
Hi,
We have a currency translation defined for a key figure. We've defined a variable for users to select target currency. 0currency is set to pick up from master data, but the input help on the variable is only showing currencies from infoprovider. I debugged the query and it is trying to get the currencies from the cube. Any setting that I do or update?
We're using BW 7.3 SP10 on HANA.
SonniHI
Once check in the BEx tab of that IO, there select the f4 option.
Regards,
Sunil. -
I'm having some difficulty with Time Machine. It appears to be deleting backups from random dates on my external hard drive. I am not deleting them. Are they hidden and how do I prevent this from happening? Can I retrieve them?
... I didn't know that Time Machine was more a last resort back up instead of main back up.
Don't rely upon Time Machine to the exclusion of all else. I compliment Time Machine with a periodic "clone". TM is much better than nothing, but it's a safety net, not a hammock
Here is my understanding of Time Machine's file deletion algorithm, distilled from Pondini's FAQ, Apple's KB articles, and my own observations.
Time Machine deletes ("thins") files from the backup disk as follows:
Hourly backups over 24 hours old, except the first backup of the day
Daily backups over 30 days old, except the first backup of the week
Older backups get deleted when Time Machine requires space and you deleted them from the source disk.
Therefore, assuming TM has been performing at least one backup per day, backup files will remain available:
at least thirty days, if they existed on your Mac for at least a day
until you run out of space, if they existed on your Mac for at least a week
In addition to the above, Time Machine always keeps one complete copy of your source disk so that the entire volume could be restored if necessary. Any files that remain on your source volume will be present on the TM backup, no matter how old they are.
If you are using 250 GB of space on your source disk, its Time Machine backups are likely to require at least twice that much. A good estimate of the minimum required backup volume size would be about three times the size of your source disk - 1.5 TB in your case.
A more thorough explanation would require Pondini since he has plumbed Time Machine's mysteries far more than I have.
http://support.apple.com/kb/HT1427 -
Web report data provider change from Master data table to InfoCube
hi Experts,
I have created one report on top of multiprovider but in the selection screen when i check the values for a variable I came to know that data is coming from master data table and not from data provider(InfoCube).Can any one help to change the data selection from master data table to data provider(InfoCube) and i am sure that there is no ODS involved in the multiprovider.
Thanks in advance
With Regards,
BalaHello,
If u are using Analyser then just put a Analysis Grid on the output of the query(should cover all the rows and column) , click on the grid and put the dataprovider. and do auto fit.
Rohit -
Archiving and deleting of equipment master data in plant maintenance module
Hi,
Can anyone explain me the process to archive and delete the equipment master data in PM module using archiving tools.
I tried doing it thru t-code SARA, would be grateful if anyone can help me with the steps to follow to archive the equipment master data.
Thanks in advance,Many thanks for your reply,
I tried doing the same in IDES, but unfortunately the archive file is not getting generated when i write it. I have clearly specified in the variant to create an archive file. Can you please explain how does the system generate an archive file. And also in the customizing " Archiving Object-Specific Customizing " techincal settings, i have maintained the production variant and have marked start automatically.
Please advise,
thanks again , -
Abap logic not fetching multiple rows from master data table
Hi
I just noticed that my logic is fetching only 1 row from master data table.
ProdHier table
PRODHIERACHY Level
1000 1
1000011000 2
10000110003333 3
10000110004444 3
'10000110005555 3*
logic only fetches one row of level 3, I would like to fetch all level 3 rows.
DATA: ITAB type table of /BI0/PPROD_HIER,
wa like line of ITAB.
Select * from /BI0/PPROD_HIER INTO wa where /BIC/ZPRODHTAS = 3.
IF wa-PROD_HIER(10) = SOURCE_FIELDS-PRODH2.
RESULT = wa-PROD_HIER.
ELSEIF wa-PROD_HIER(5) = SOURCE_FIELDS-PRODH1.
RESULT = wa-PROD_HIER.
ENDIF.
ENDSELECT.
thanksHi,,
I have implemented the logic in end routine and it still reads only the first row.
I am loading only PRODH1 and PROD2 but now I want to get all values of PRODH3 from the master data table.
The first 5 values are PRODH1 and first 10 values belongs to PRODH2.
Whenever PRODH2 = 1000011000 in source I should get the following values
10000110001110
10000110001120
10000110001130
I have multiple rows of 1000011000 so my result should be
1000011000 10000110001110
1000011000 10000110001120
1000011000 10000110001130
DATA: ITAB type table of /BI0/PPROD_HIER,
wa like line of ITAB.
data rp type _ty_s_TG_1.
Select * from /BI0/PPROD_HIER INTO table itab where /BIC/ZPRODHTAS = 3.
LOOP AT RESULT_PACKAGE INTO rp.
read table itab into wa with key PROD_HIER(5) = rp-PRODH1.
IF sy-subrc EQ 0.
rp-PRODH3 = wa-PROD_HIER.
ELSE.
read table itab into wa with key PROD_HIER(10) = rp-PRODH2.
IF sy-subrc EQ 0.
rp-PRODH3 = wa-PROD_HIER.
ENDIF.
ENDIF.
MODIFY RESULT_PACKAGE FROM rp.
ENDLOOP.
Edited by: Bhat Vaidya on Sep 10, 2010 11:27 AM
Edited by: Bhat Vaidya on Sep 10, 2010 11:37 AM -
Issues In Reading Attribute Values From Master Data
Hi All,
I have a requirement where, i need to read an attribute value from master data. I have a characteristic YCSTATMCG (AT Cost Group Code) which is the master data from where i have to read the attribute, 0PROFIT_CTR (Profit Center). The attribute thus read, has to be populated into another characteristic, YPROFIT_C. But YCSTATMCG referes to another characteristic, YCSTCG. Here is the FOX Code I wrote with YPROFIT_C as the changing characteristic and 0AMOUNT as keyfigure.
DATA V_ATCP TYPE YCSTATMCG.
DATA V_PROFIT TYPE YPROFIT_C.
DATA V_PROFITC TYPE YPROFIT_C.
DATA V_AMOUNT TYPE F.
V_ATCP = OBJV().
MESSAGE I020(YCO_CFT) WITH V_ATCP.
V_AMOUNT = {0AMOUNT, # }.
V_PROFIT = ATRV('0PROFIT_CTR' , V_ATCP).
MESSAGE I020(YCO_CFT) WITH V_PROFIT.
{0AMOUNT, V_PROFIT} = V_AMOUNT.
But this is not working. The ATRV() function is not reading the attribute values at all. Any solutions and suggestions is highly valued.
Thanks in advance
SwaroopHi,
even i have the same situation.
i just want the attribute value of a char to be populated into another characteristic in the planning query.
my question is whether i should populate the keyfigure field also in the FOX code.
if so should i populate both 0amount and 0quantity fields as i have 2 keyfigure fields.
Thanks for your help
Nishanth -
Reading From Master data failure
I have enhanced 0VENDOR_ATTR with ZTERM field from LFM1 table and everything is working fine ...I have added ZPMNTTRMS as an attribute in 0VENDOR and loaded the data its working fine .But when I was using this ZPMNTTRMS in a DSO and say read from master data and took the source field as 0vendor ...then Iam not able to see the values for this info object...Ofcourse 0VENDOR is loading fine....Can any one let me know what is the issue here ? / Is there any routiene / some code needs to be written some where to get the ZPMNTTRMS values in DSO ...Please advice ASAP...
regardshi nw2004s,
have you performed change run ?
rsa1->tools->apply attribute/hierarchy change run (or RSATTR)
hope this helps. -
Can we use idoc technique to change or delete the vendor master data?
Hi,gurus,
Can we use idoc technique to change or delete the vendor master data?You know we can create vendor data using idoc CREMAS03 as the receiver adapter,but when change or delete the specified vendor data,must we use RFC adapter technique?
Another question:I found the bapi which creates a vendor master data doesn't have the parameter account group,then we turned to idoc technique.But which adapter should I use when change or delete the vendor data?
Thanks in advance.Hi,
>>>I found the field of the segment of deletion flag at different level,and very appreaciate your help.
yes - LOEVM - but remember this will not delete the record but only mark it for deletion
>>>It's a long time to wait for your new blog,what new and interesting things do you find?
at least 4 new in my head - 2 simple but important and 2 new + I'd also like to write something for XI guys about
BO data integrator which can also work as EAI tool (BTW I know it's ETL) but how knows when they will appear
Regards,
Michal Krawczyk -
Deleting a record from Master data
Hi all,
I need some help with deleting a record from the master data.I did go to the master dta maintenance screen and selected the record to be deleted. I saved it. I received the message, "master Data record cannot be deleted".
I then went into transaction slg1 to check for the details of the record. A message stating " Master data record XXX is being used in the cube /BIC/Dzzzyyy312.
This record is no longer needed by the end user and was requested to be deleted. Could some one tell me if there is a possibility to delete this unused masterdata record. Your suggestions are appreciated.
Regards!Hi Sumana,
Check this...Similar Post..
MAster data deletion throws a dump
Hope it helps
Srini -
Navigatiomnal attribute is not possible to delete from master data?
WHen I tried to delete the navagational attribute I am getting an erro like this.
Characteristic Z5xyz: Master data has to be activated before conversion
Message no. R7067
Diagnosis
The master data for characteristic Z5xyz has to be converted, because an attribute has been deleted, or the time-dependency of an attribute has been changed. This process is possible, only if the master data for characteristic Z5xyz is active. The master data table /BIC/PZ5xyz contains only new or modified records, that have not yet been activated.
System Response
Characteristics Z5xyz cannot be activated.
Procedure
Activate the master data for characteristic Z5xyz , before you activate the characteristic itself.
Can any one help me to resovlet his.
points will be definitely assigned.
Thanks,.
VasuHi Vasu,
You are tying to delete a table filed when the table contains data. For this you need to adjust the database table.
But instead of doing all this you may follow a simpler method.
Before deleting that Characteristics you need to delete the Masterdata first. Then delete the Characteristics from the attribute list and activate the Masterdata Object. Now reload the masterdata.
Regards,
Pratap Sone -
Deletion of huge master data from Admin console
Dear All
we are using EPM 10 of SP16. By mistake we have loaded wrong md to one of the dimension.
we are trying to delete master data from a dimension with specific filter on one of the property.
we are getting the errror repeatedly...
"An exception of type 'CX_SY_CONVERSION_CODEPAGE' occurred, that was not caught anywhere in the call hierarchy. It was not handled locally or declared using a RAISING clause."
"Unhandled Error (HTTP Status:500): Error #1009"
Steps followed.
1. Deleted small small amounts of MD [ 100 to 200 at a time]. and then processed. It went fine. but the deleted members came back.
2. 'CX_SY_CONVERSION_CODEPAGE' exception while processing dimension : Followed this note and refreshed dimension cache. Even after which we are getting above error and all the deleted md has come back.;
There are nearly 50,000 records needs to be deleted asap.
Can somebody please help us...
thanks
PrasadHi Prasad,
I think you have to follow this note, for large volume of master data, 1672453 - BPC 10 NW Unhandled Error (HTTP Status: 500) Error #1009. Unable to Save or Process Master Data
Regards
Roberto -
Abap code not working - deleting based on master data table information
Hi,
I wrote a piece of code earlier which is working and during test we found out that it will be hard for the support guys to maintain because it was hard coded and there is possibility that users will include more code nums in the future
sample code
DELETE it_source WHERE /M/SOURCE EQ 'USA' AND
/M/CODENUM NE '0999' AND
/MCODENUM NE '0888' AND.
Now I created a new InfoObject master data so that the support people can maintain the source and code number manually.
master data table - the codenum is the key.
XCODENUM XSOURCE
0999 IND01
0888 IND01
now I wrote this routine all the data gets deleted.
tables /M/PGICTABLE.
Data tab like /M/PGICTABLE occurs 0 with header line.
Select * from /M/PGICTABLE into table tab where objvers = 'A'.
if sy-subrc = 0.
LOOP at tab.
DELETE it_source WHERE /M/SOURCE EQ tab-XSOURCE AND /M/CODENUM NE tab-XCODENUM.
ENDLOOP.
Endif.
But when I chage the sign to EQ, I get opposite values , Not what I require.
DELETE it_source WHERE /M/SOURCE EQ tab-XSOURCE AND /M/CODENUM EQ tab-XCODENUM.
Cube table that I want to extract from
/M/SOURCE /M/CODENUM
IND01 0999
IND01 0888
IND01 0555
IND01 0444
FRF01 0111
I want to only the rows where the /M/CODENUM = 0999 and 0888 and i would also need FRF101
and the rows in bold should be deleted.
thanks
Edited by: Bhat Vaidya on Jun 17, 2010 12:38 PMIt's obvious why it deletes all the records. Debug & get your answer i wont spoon feed
Anyways on to achieve your requirement try this code:
DATA:
r_srce TYPE RANGE OF char5, "Range Table for Source
s_srce LIKE LINE OF r_srce,
r_code TYPE RANGE OF numc04,"Range table for Code
s_code LIKE LINE OF r_code.
s_srce-sign = s_code-sign = 'I'.
s_srce-option = s_code-option = 'EQ'.
* Populate the range tables using /M/PGICTABLE
LOOP AT itab INTO wa.
s_code-low = wa1-code.
s_srce-low = wa1-srce.
APPEND: s_code TO r_code,
s_srce TO r_srce.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM:
r_code COMPARING ALL FIELDS,
r_srce COMPARING ALL FIELDS.
* Delete from Cube
DELETE it_source WHERE srce IN r_srce AND code IN r_code.
Maybe you are looking for
-
Excel 2013 data connection to SharePoint list - charts won't update unless i manually refresh
I have a list called 'donations', and a connected workbook stored in an SP Document Library. On my sitepages homepage, I put an excel web part connected to a chart called "Total Donations". I'm storing the Data Connection file on a Windows shared dr
-
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
-
XML Schema based form in webdynpro
Hi I have existing webdynpro which is having an interactive form view. The form is XML schema based. I want to create the same webdynpro with different data structure and different interactive form. Do i need to create the form with XML schema or do
-
Safari keeps crashing in some sites
So every time I click some sites my safari automaticaly crashes, giving me this report: Process: WebProcess [5169] Path: /System/Library/StagedFrameworks/Safari/WebKit2.framework/WebProcess.app/Conten ts/MacOS/WebProcess Identifier
-
Programmat​ically change the modified date of a folder
Is there a way to programmatically change the last modified date of a folder? The OpenG file info VI doesn't seem to work for a folder. Jim LV 2013 Solved! Go to Solution.