Delete attachments when vo record deleted

Does anyone have a code example for deleting all attachments associated with a vo record before deleting the the vo record?
I searched the forum but couldn't find any post for cascading delete of attachments or orphaned attachments.
I have a page with a single row region with an attachments table. I have a delete button that deletes the row. I want to delete all the associated attachments from the attachments table when the vo ro is deleted. If I just delete the vo record, the attachments are orphaned. The attachments are still visible in the fnd_attached_documents table.

I searched for OAAttachmentServerUtils in the java doc for OA Framework v. 11.5.10 (903813_1560) but could not find the referenced class.
Is it available in 11i.ATG_PF.H.RUP5?

Similar Messages

APP-PAY-07201 Cannot perform a delete when child record exists in future

I am trying to put end date to a payment method of any employee in HR/Payroll 11.5.10.2
but receiving the following error message:
APP-PAY-07201 Cannot perform a delete when child record exists in future
Can u advise what steps I should follow to resolve this issue.
Regards /Ali

This note is related to termination of employee while our employee is on payroll and just want to change is payment method. But in the presence of existing payment method we cannot attched another becuase we are receiving an error:
APP-PAY-07041: Priority must be unique within an orgainzational payment method

When are records deleted from PRX_Transaction_Queue

Total WebTools newbie.
I'm getting conversant with PRX_Transaction_Queue. What I don't know is when these records get cleaned out. Can somebody point me to documentation?
When is it okay to manually delete records from PRX_Transaction_Queue?

This might be similar to a problem we ran into.
Look into turning the cache off in toplink - I think by default its turned on. I don't have my notebook in front me right now so I can't look up the exact setting but I'm sure if you google it you'll find it.

How do I make it stop automatically building loops when I record?

So I just downloaded Garage Band 10 and I can't find answers to my many questions about all of the changes from the previous Garage Band I had installed.
The two main snags I am hitting right now are:
1. In the previous garage band you were able to add effects like echo, reverb, tremolo, as well as tinker with the attack decay, etc., all in one set of drop down menus. In the new garage band it seems to have pretend amps with knobs and whether you get 4 knobs to turn or 10 knobs to turn seems completely arbitrary, but it is usually limited to threshold, attack, release, volume. Is there any way to add effects and edit the instrument quality in a uniform way like there was before?
2. Whenever I record something say over the course of 2 bars, it automatically creates a loop for the following 6 bars, and I have to go in and cut those bars out and delete them every time. Is there a way to turn this feature off?
Thanks.

Hi, thanks for your response. Thanks for telling me about "Audio Units;" that helped answer my first question, although it seems that effects like Tremolo, Phaser, etc., are no longer available in Garage Band.
léonie wrote:
The available effects depend on the selected patch.
Correct me if I am wrong, but with the previous Garage Band, every effect was available for every patch... there may have been some presets or recommended effects, but you could always customize the effects as you liked. It seems a lot more limited now, unfortunately, I guess to compel users to buy additional DAW software.
Regarding number 2, thanks for your response but that is not what I am talking about. Let's say I am recording MIDI and I record a piano melody CDEFG in bars 1-2. When I press stop, Garage Band automatically copies the two bars I recorded and creates CDEFG CDEFG CDEFG CDEFG across bars 1-8. This is the default setting when I record MIDI and I would like to disable it if possible, since it means every time I record I have to delete multiple bars of data I didn't want it to produce.

Save required when adding record to avoid multiple record entries@same time

Hello, just wondering if anyone would be so kind as to help me out. I have a small problem that when a user is adding records to my form I want them to add one, then if they go on to add another at the same time (before commiting the first one) that they will be shown a prompt Which states something along the lines of "Before you add another record you must first save the first record, do you wish to do so" , yes will then commit the first record and allow the user to enter the second record, whilst cancel will not allow a second record to be entered.
If anyone would helpout i would be very grateful.

Hi
Here is my suggestion, the idea is to use a global variable to memorize the fact that a record has been created :
KEY-CREREC
begin
          if :GLOBAL.<BLOCK-NAME>RECORDCREATED = 'FALSE' then
               create_record;
               :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'TRUE';
          else
               message('Commit or delete before inserting a new record');
               message('Commit or delete before inserting a new record');
          end if;
end;
=====================================================================
KEY-DELREC
begin
     if :system.record_status in ('NEW','INSERT') then
          :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'FALSE';
     end if;
     delete_record;
end;
====================================================================
KEY-COMMIT
begin
     commit_form;
     :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'FALSE';
end;
====================================================================
POST-SELECT
:GLOBAL.<BLOCK-NAME>RECORDCREATED := 'FALSE';
====================================================================
It's a bit more complicated if you allow the user to go beyond the last record for creating a new record, as KEY-CREREC and KEY-DELREC are not triggered.
In this case, my suggestion is the following :
KEY-CREREC
begin
          if :GLOBAL.<BLOCK-NAME>RECORDCREATED = 'FALSE' then
               if :system.last_record = 'TRUE'then
                    next_record;
               else
                    create_record;
                    :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'TRUE';
               end if;
          else
               message('Commit or delete before inserting a new record');
               message('Commit or delete before inserting a new record');
          end if;
end;
===============================================================
WHEN-NEW-RECORD-INSTANCE
begin
     if :system.mode = 'NORMAL' then
          if :system.record_status = 'NEW' and :system.last_record = 'TRUE' then
               if :GLOBAL.<BLOCK-NAME>RECORDCREATED = 'TRUE' then
                    message('Commit or delete before inserting a new record');
                    message('Commit or delete before inserting a new record');
                    delete_record;
               end if;
          end if;
     end if;
end;
================================================================
KEY-DELREC
begin
     if :system.record_status in ('NEW','INSERT') then
          :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'FALSE';
     end if;
     delete_record;
end;
=================================================================
KEY-COMMIT
begin
     commit_form;
     :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'FALSE';
end;
===============================================================
WHEN-VALIDATE-RECORD
begin
     if :system.record_status = 'INSERT' and :system.last_record = 'TRUE' then
          :GLOBAL.<BLOCK-NAME>RECORDCREATED := 'TRUE';
     end if;
end;
==================================================================
POST-SELECT
:GLOBAL.<BLOCK-NAME>RECORDCREATED := 'FALSE';
================================================================

In forms 4.5 when query record assigning value is possible?How?

Hi all,
when query record ,depending on condition i can assign value.
I done but it give error first delete or create record error?
How can i overcome this problem.
Thanks
venkata.

IF v_value = 'Y'
THEN
lvl$std.copy_number(0,'BLK1.V_ITEM_NAME1');
ND IF;
I written in post-query.What does
lvl$std.copy_number(0,'BLK1.V_ITEM_NAME1');do that
:blk1.v_item_name1 := 0;doesn't?

How to get Value of a item of first record when current record is second

How to get Value of a item of first record when current record is second in Form6i ?
get_item_instance_property dose not allow to get value.

Gerd,
You're right, there are several other triggers that must be coded, but I was responding to Steve's statement about Inserting or deleting records from the multi-record block. For the record, I use the following to manage a Record Group:
* When-New-Block-Instance - Initialize the RG
* block Post-Query - populate the RG
* When-Create-Record - add new record to RG
* When-Remove-Record - remove record from RG
* block When-New-Item-Instance - capture previous value of the item or row
* When-Validate-Item - Item specific Insert, Update, Delete of values in the RG
There are a few other places as well, but these are the minimum. It might seem like a lot of code, but then again, I don't use this solution for every multi-line block. Like all tools, you use the right tool for the job. :-)
Craig...

Start an executable from ODI when a record is inserted

Hi All,
I'm new with ODI and I have a problem. Is it possible that ODI to "feel" when a record is inserted in a mapped Oracle table and start a program? Could I use shell scripts for this?
Thanks in advance,
Teodora

Hi cdmnagaraj,
I give you my example and how I've fixed it. Hope that it will help you.
So... the most important requirements:
- I have an application that writes a file and a record in a parameter table.
- When this records appear I write a record in another's application parameters table.
- The next step is to start the second application.
- When the process is done, it deletes the record from the second parameter table. No odi action
- When I see that there is no record, I must update the status of the parameters record in the first table.
How I did:
- wrote a package where I put the steps, starting with writing in the record in the second parameters table, up to the updating the status in the first parameters table
- generated a scenario for this package
- wrote another package where I put the first step where I wait for the record to appear in the first parameters table
- the second step is the scenario (just drag and drop it)
- if the scenario finishes in error I send a mail
- if the scenario finishes ok I return to the first step.
Right click on the first step and mention that it is the first step.
Launch the package. If it finishes successful, you will see that another log entry appears and waits for another data.
Regards,
Teodora

When-Remove-Record, does not update header field

i have master-detail form and in that there is a DB field eh_amount, which takes it value from
the computed non-db summary field m_amount
my E_head
eh_code
eh_no
eh_amount
my E_detail (tabular with 5 records displayed)
ed_eh_code
ed_eh_no
ed_amount
m_amount <---summary column (summing ed_amount)
whenever i enter/update ed_amount , m_amount get computed properly.
i have WVI trigger written where i store eh_amount := m_amount
i have also written When-remove-record on e_datail block, where i again re-initialize
eh_amount := m_amount
the detail record gets deleted and m_amount gets updated,
but the header eh_amount does not show the updated value of m_amount.
Kindly suggest to me as to where the change has to happen.

Hi Craig..
I am using form6i, db 10g.
I am not doing summation myself. My m_amount field is calculated field set at design time.
Summary detail block is E_detail and summary field is ed_amount.
Only after saving form, the new value for eh_amount is seen.
what i want is eh_amount should be seen updated, if while entering i delete any detail record.
in when-remove-record i am storing m_amount in eh_amount, but the new value of eh_amount
is visible only after saving the form and not when any record is deleted.

Crystal Report Alerts not firing when no records are fetched from the DB

Hello,
The crystal report alert i have created in the report in the event of no records being fetched from the query is not firing. The condition used is isnull ( count(DB Field ) ).
Is there a limitation with alerts that they would be fired only when some records are fetched in the report.
Appreciate any pointers
-Jayakrishnan

hi Jayakrishnan,
as alerts require records to be returned here's what you will need to do:
1) delete your current alert
2) create a new formula with syntax like
isnull(DistinctCount ()) or DistinctCount () = 0
3) create a new Subreport (which you will put in a report header)
4) the subreport can be based off of any table
5) have the subreport record selection always return only 1 record...for performance reasons
6) change the subreport link to be based on the new formula
7) the link will be a one way link in that you will not use the "Select data in subreport based on field" option
8) now in the subreport, create the Alert based on the parameter created by the subreport link
i have tested this and it works great.
jamie

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

jamestait wrote:
when I record, my previous track data keeps getting overwritten.
since you didn't specify, are you recording in a single take?
http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
(Let the page FULLY load. The link to your answer is at the top of your screen)

IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

How do I separate audio channels to edit them seperatly ... they are both in the same clip when I record from two diffrent mics on two diffrent channels

I have premier
elements 12
How do I separate audio channels to edit them seperatly ... they are both in the same clip when I record from two diffrent mics on two diffrent channels

timc
I do not see a way to separate audio channels to edit them separately in Premiere Elements (any version).
Premiere Elements does have audio effects including Balance, Fill Right/Fill Left, and Swap channels, but that is not what you are seeking.
I would refer you to an audio editor such as the free Audacity for what you want to do.
Splitting and Joining Stereo Tracks - Audacity Manual
I am not sure if this is close to what you seek
https://forums.creativecow.net/thread/3/883383
But, the opportunity seems to be in Premiere Pro, not Premiere Elements
Please review and consider and then let me your thinking on the matter relating to your Premiere Elements 12 (what operating system).
Thanks.
ATR

How to get those Char Description when i record please give a solution

Hi Experts
when i try to extend using BDC the meterial all data is getting copied to new plant but in MRP3 Configure varients is not getting copied in bdc i am getting all the values from parent plant but these values are not getting displayed in new plant for only *MRP3 Configure varients
how to get those values please give a solution
and
when i am trying to make the BDC recording of creation of meterial in this process
in MRP3 when i give configurable meterial = Lamp or CT or VOLTMETER and when
i go for configurevariants button it's not displaying any Char Description for the perticular meterial
but in general when i creat a material process there Char Description are coming where i can give the values
how to get those Char Description when i record please give a solution

Hi Maen Anachronos
i am Getting popup where i can give any value
but in creation of meterial for a perticular config meterial there is will be 1 templete in which we will get some constant Char Description where we'll have some options to give the value
but when it 's done in BDC Recording it's not displaying any values Char Description then how can we decide the values to what to give when Recording

Delete attachments when vo record deleted

Similar Messages

Maybe you are looking for