Delete items not selected button

hi,
in miro, there is 1 refresh button at the bottom.
when i create invoice with reference to PO, i need to click this button to make the miro display po line item amount and quantity. later i need to click deselect all button and select the line item that i want.
may i know how to directly select the line that i want with amount and quantity displayed instead of do several steps as mentioned above.
also, the button name is misleading. why it is called delete items not selected?
thanks

Hmmm -- to be totally confident not any item inside a given frame uses your color needs a lot of checks.
Check this quite similar request:
Spot color used in indesign document
My comment was that to be sure you'd need to check, amongst others, every single character for either fill or stroke, table strokes and fills, paragraph rules, underline and strikeout ...

Similar Messages

Item not selected in document

Dear All,
while doing MIGO(GR) the message comes "item not selected in document".
Please suggest what i can do to process.
Thanks and Regards,
Baiju

hi BAIJUKUMAR ,
in migo ok baton is there select on it after u check, u will not get error
hope it will work
regards
biswa

Deleted Items Not Syncing

This is happening with random users but not all.
User receives voice mail in outlook - deletes from inbox
On unity connection the voice mail remains in the connection inbox.
Now on other users the deleted VM is moved to deleted items in connection as expected and works just fine.
Unity Connection 9.1
Exchange 2010
Any ideas? I ran a re-sync on the unified messaging accounts and a reset but it still does not seem to be working for those select users.

I suspect you are enable Exchange cache mode and delete items offline.
If no, please recreate a new Outlook profile and check if the issue still persists. Thanks.
Tony Chen
TechNet Community Support

F.19 GRIR reclassification - Item not selected in the report log

Hi Guru,
There are two items (one cleared pair) which are not selected into GRIR reclassification (Tcode F.19), both posting date is on 30.05.2007, while wiht cleared date on 30.06.2007 (clearing document with posting date on 31.05.2007), why they are not counted in the reclassification report. pls advice, I really donot have any clue about it.
Thanks,
Kick

Hi All,
why nobody reply this question, is it the question not clear?
There are two items (one cleared pair) which are not selected into GRIR reclassification (Tcode F.19), both posting date is on 30.05.2007, while with cleared date on 30.06.2007 (clearing document with posting date on 31.05.2007), why they are not counted in the reclassification report. the reclassification has been done on the last day of May. pls advice, I really donot have any clue about it.

Sent and Deleted items not showing up

I'm not able to see sent or deleted items in outlook. I am not using a ost and if I log onto OWA I can see both.

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Deleted items not going to recycle bin.

Whenever I delete something from my iTunes library, I get the popup asking if I want to move it to the recycle bin or leave the file on the computer, and I always click on the button to move it to the recycle bin.
And it never does. It just leaves everything in the hard drive.
Since I watch a daily vlog as a video podcast, this can add up to some serious hard drive space wasted in short order.
I've drilled down to the folder for that in my iTunes folder, and sure enough there was the last episode I had just removed.
It'll be a major pain to sort through and delete the items I've removed, but not the ones I'm saving, and am wondering if there is a way to fix iTunes to work properly, like it did on my old Mac, rather than having to navigate my way through the iTunes folder every time I don't want to save something I've just played the one time I downloaded it for.

Hello klep:
I have seen this before but, of course, I do not remember the solution.
Try a couple of things:
Run permission repair.
Restart your computer (if you have not already done so).
Trash the finder preference file (com.apple.finder.plist) and restart.
Barry

Strange ATV2 behaviour - Movies can't be selected for downloaded & most menu items not selectable??

ATV2 fully online, previews movies, downloads YouTube, Homesharing all good (and a seasoned ATV owner and user)
However download movies is not working, and no error message just a "beep" sound when you select "rent movie".
Also many of the menu items cannot be selected. You cannot down select most of the items under General, so it's impossible to change settings, or to do any troubleshooting. You get the same "beep" sound when you select Name, Network, iTunes Store, Reset, etc.
I have done the usual power down, plus reset using remote, but the system doesn't seem to go back to factory default. I haven't tried the mini-USB connection to MAC as I don't have a cable but hoping someone can help?

<Button guid="guidCBExtensionPkgCmdSet" id="cmdIdCBAutoSave" priority="0x0100" type="Button">
<Parent guid="guidCBExtensionPkgCmdSet" id="CBAutoSaveGroup" />
<Icon guid="guidImages" id="bmpDisk" />
<CommandFlag>TextChanges</CommandFlag>

<Strings>
<ButtonText>Enable Document AutoSave</ButtonText>
</Strings>
</Button>
private void OnBeforeQueryStatus(object sender, EventArgs e)
DbgMessage("OnBeforeQueryStatus");
var myCommand = sender as OleMenuCommand;
if (null != myCommand)
switch (myCommand.CommandID.ID)
case (int)PkgCmdIdList.CmdIdCBAutoSave:
myCommand.Enabled = true;
myCommand.Text = _autosaveEnabled ? "Disable Document AutoSave" : "Enable Document AutoSave";
break;
case (int)PkgCmdIdList.CmdIdCBAutoSaveProject:
myCommand.Text = _autosaveProjectEnabled ? "Disable AutoSaveProject" : "Enable AutoSaveProject";
myCommand.Enabled = _autosaveEnabled;
break;
default:
break;
DbgMessage(string.Format("Id: {0} Text: {1}", myCommand.CommandID.ID, myCommand.Text));
Very puzzling that I have only seen the bad behavior on Win8.1, and not when debugging the extension. (Haven't been able to try the extension on Win8, but have tried it on several Win7 computers, and one WinServer 2012 R2 computer.)
Is there someplace to look for runtime exceptions? I haven't seen any in the Output window when the bad behavior occurs....
(If you want to try the extension, you can add a gallery and point it to www.cbates.net/VSIX/atom.xml.)

Deleted Item not actually getting deleted or **delay** deleted thus getting refetched (EWS Managed API)

I am polling Exchange Server to fetch all the mails left in the Inbox and then fetching them, processing them and finally moving them to the deleted folder. My procedure takes following form of EWS Managed API calls:
1 itemResults = service.FindItems(WellKnownFolderName.Inbox, itemView);
2 //some code...
3 service.LoadPropertiesForItems(itemResults.Items, itItemPropSet);
4 //some code...
5 foreach(Item item in itemResults)
6 {
7 //process item
8 item.Delete(DeleteMode.MoveToDeletedItems);
9 }
To test this code I flooded the inbox with 5000 mails, 5 threads flooding 1000 mails each at the interval of 4ms.
After test run, I realized some mails are getting processed multiple times.
When I read the soap traces logged using TraceListener, I realized that when there are more than 100 mails in the inbox, there are more SOAP packets were dispatched in burst of 100s.
Logically below set of SOAP Packets (let us call it "Set 1") should occur only once:
<m:FindItem>...</m:FindItem> //generated by line 1
<m:FindItemResponse>...</m:FindItemResponse> //generated by line 1
<m:GetItem>...</m:GetItem> //generated by line 3
<m:GetItemResponse>...</m:GetItemResponse> //generated by line 3
followed x number of Delete SOAP packets for x number of mails in the Inbox
<m:DeleteItem>...</m:DeleteItem> //generated by line 8
<m:DeleteItemRepsonse>...</m:DeleteItemRepsonse> //generated by line 8
However if there are say 325 mails in the inbox, then there first occurs 4 occurences of Set 1 followed by Delete SOAP packest as follows:
//1st occurence
<m:FindItem>100 items</m:FindItem>
<m:FindItemResponse>100 items</m:FindItemResponse>
<m:GetItem>100 items</m:GetItem>
<m:GetItemResponse>35 items</m:GetItemResponse>
//2nd occurence
<m:FindItem>100 items</m:FindItem>
<m:FindItemResponse>100 items</m:FindItemResponse>
<m:GetItem>100 items</m:GetItem>
<m:GetItemResponse>35 items</m:GetItemResponse>
//3rd occurence
<m:FindItem>100 items</m:FindItem>
<m:FindItemResponse>100 items</m:FindItemResponse>
<m:GetItem>100 items</m:GetItem>
<m:GetItemResponse>100 items</m:GetItemResponse>
//4th occurence
<m:FindItem>35 items</m:FindItem>
<m:FindItemResponse>35 items</m:FindItemResponse>
<m:GetItem>35 items</m:GetItem>
<m:GetItemResponse>35 items</m:GetItemResponse> //****followed by 335 occurences of the Delete SOAP packets****<m:DeleteItem>...</m:DeleteItem>
<m:DeleteItemRepsonse>...</m:DeleteItemRepsonse>
//334 more of above
So there are 100 + 100 + 100 + 35 = 335 items actually getting handled, which is 10 more than what are actually present in the inbox.
Also notice that Delete SOAP packets are queued till end. They are not dispatched in burst.
First thing I realize dispatching SOAP packets in burst of 100s is EWS Managed API behavior. I guess there must be traffic reason behind it and there must be some configuration setting to tweak it.
Q1. How can we change this count of 100?
I inferred that there are some overlaps in fetching of mails.
So I copy pasted SOAP Traces for first two of
<m:GetItem>100 items</m:GetItem>
in two different files, and compared them in text comparer. I realised that some mails that are at the end of the first 100s were reappearing at the beginning of 2nd 100:
This is the pattern in many test runs.
Due to this these overlapping mails, these mails are getting processed twice. Also the attempt to second time delete them was throwing exception : The specified object was not found in the store.
So I guess there is time delay in delete mail API call and mails actually getting deleted, between which they are getting refetched.
Q2. How can I handle this to avoid redundant processing of mails and unnecessary exceptions.

I am polling Exchange Server to fetch all the mails left in the Inbox and then fetching them, processing them and finally moving them to the deleted folder. My procedure takes following form of EWS Managed API calls:
1 itemResults = service.FindItems(WellKnownFolderName.Inbox, itemView);
2 //some code...
3 service.LoadPropertiesForItems(itemResults.Items, itItemPropSet);
4 //some code...
5 foreach(Item item in itemResults)
6 {
7 //process item
8 item.Delete(DeleteMode.MoveToDeletedItems);
9 }
To test this code I flooded the inbox with 5000 mails, 5 threads flooding 1000 mails each at the interval of 4ms.
After test run, I realized some mails are getting processed multiple times.
When I read the soap traces logged using TraceListener, I realized that when there are more than 100 mails in the inbox, there are more SOAP packets were dispatched in burst of 100s.
Logically below set of SOAP Packets (let us call it "Set 1") should occur only once:
<m:FindItem>...</m:FindItem> //generated by line 1
<m:FindItemResponse>...</m:FindItemResponse> //generated by line 1
<m:GetItem>...</m:GetItem> //generated by line 3
<m:GetItemResponse>...</m:GetItemResponse> //generated by line 3
followed x number of Delete SOAP packets for x number of mails in the Inbox
<m:DeleteItem>...</m:DeleteItem> //generated by line 8
<m:DeleteItemRepsonse>...</m:DeleteItemRepsonse> //generated by line 8
However if there are say 325 mails in the inbox, then there first occurs 4 occurences of Set 1 followed by Delete SOAP packest as follows:
//1st occurence
<m:FindItem>100 items</m:FindItem>
<m:FindItemResponse>100 items</m:FindItemResponse>
<m:GetItem>100 items</m:GetItem>
<m:GetItemResponse>35 items</m:GetItemResponse>
//2nd occurence
<m:FindItem>100 items</m:FindItem>
<m:FindItemResponse>100 items</m:FindItemResponse>
<m:GetItem>100 items</m:GetItem>
<m:GetItemResponse>35 items</m:GetItemResponse>
//3rd occurence
<m:FindItem>100 items</m:FindItem>
<m:FindItemResponse>100 items</m:FindItemResponse>
<m:GetItem>100 items</m:GetItem>
<m:GetItemResponse>100 items</m:GetItemResponse>
//4th occurence
<m:FindItem>35 items</m:FindItem>
<m:FindItemResponse>35 items</m:FindItemResponse>
<m:GetItem>35 items</m:GetItem>
<m:GetItemResponse>35 items</m:GetItemResponse> //****followed by 335 occurences of the Delete SOAP packets****<m:DeleteItem>...</m:DeleteItem>
<m:DeleteItemRepsonse>...</m:DeleteItemRepsonse>
//334 more of above
So there are 100 + 100 + 100 + 35 = 335 items actually getting handled, which is 10 more than what are actually present in the inbox.
Also notice that Delete SOAP packets are queued till end. They are not dispatched in burst.
First thing I realize dispatching SOAP packets in burst of 100s is EWS Managed API behavior. I guess there must be traffic reason behind it and there must be some configuration setting to tweak it.
Q1. How can we change this count of 100?
I inferred that there are some overlaps in fetching of mails.
So I copy pasted SOAP Traces for first two of
<m:GetItem>100 items</m:GetItem>
in two different files, and compared them in text comparer. I realised that some mails that are at the end of the first 100s were reappearing at the beginning of 2nd 100:
This is the pattern in many test runs.
Due to this these overlapping mails, these mails are getting processed twice. Also the attempt to second time delete them was throwing exception : The specified object was not found in the store.
So I guess there is time delay in delete mail API call and mails actually getting deleted, between which they are getting refetched.
Q2. How can I handle this to avoid redundant processing of mails and unnecessary exceptions.

IPhone 5 sending all "Sent Emails" to "Trash" Folder and deleted items not showing up at all

My boss has an iPhone 5 and today she realized that trash folder only has the last 50 emails that she has sent.
The trash folder is empty.
We use gmail. Her outlook is fine and the web interface is fine. She's tried restarting her phone. Will we have to delete the account and resync? (please say no...)
Thanks!

Dear Mr. Rakesh Vijayan,
What is your justification for below behavior?
Using basic Gapps (free) email server,IMAP option client with MSO2013. Window 7 professional
MO Professional Plus,
(15.0.4535.1006), MSO(15.0.4535.1507)32-bit.
Auto migrated/upgraded from MS2007 to MS2013 in March, 2013.
Inbox repair tools has been run 03 times since last 6 months in safe mode..
Already configured Settings> advanced and deselect "Do not save copies of sent items
Already configured File > Account Setting > double-click your IMAP account and adjust "Mail to keep offline" to "All".
Since March 2013, 95% mails are getting saved/appearing in Sent Items folder. Only some times few mails are not appearing in sent item outlook client folder.
All those emails are also appearing in All mail Folders.
Any email sent from Gapps web interface/browser definitely getting save/ appearing in sent item outlook client folder.
But now since last 4 days no email sent using outlook are appearing in sent items folder.
Sincerely Yours
Kranti Mohan | Head-Corporate Sales, Mkt. & Development |
GPS Address:30.725144N,76.765755E
Maya Hotels|SCO 325-328 | Himalaya Marg | Sector-35B | Chandigarh-160022, India.
T: +91(0172) 4688774x (D)/4688700x174 | M: +91 (0) 9915707030 | F: +91 (0172) 2660555
[email protected] |  http://www.mayahotels.in
http://www.facebook.com/mayahotel |  http://www.youtube.com/user/mayahotels
http://twitter.com/mayahotels  |  https://www.orkut.co.in/Main#Community?cmm=101119348

I keep having a deleted item not delete, shows up in a smart playlist??

Here's the deal...
I listen to a bunch of podcasts and starting about a week ago I noticed one episode I had deleted kept showing up as trying to sync. I thought I fixed it but now other episodes have this happen too after I thought I deleted it.
The file is deleted, moved to trash, even think I've trashed it. The file does not show up in the podcast area in itunes. But, the episode does show up in a smart playlist that had that file marked with 5 stars. If I look in the finder, that file is there so I delete it from finder that way.
After I delete it in the finder, the file is in the smart playlist but creates a "dead link" even though the file shows nowhere else in itunes. I must run the "super remove dead files" script (downloaded off the web) to find that dead link hidden somewhere in itunes and remove it.
This is really weird and is now happening almost every day with a different episode in my podcast list.
Any suggestions as to what needs to be deleted/re-created/cleaned up?
Thanks.

solved this on my own by running a script to remove the dead track from the playist

Menu bar - items not selectable

Hi,
I have a problem with transaction QM01 / QM02 and QM03. In the menu bar EXTRAS->Settings there a two items (Reference object view / Ctrl/Default values...), which I can't select (there are grey).
I can't find any authorization object to set the items selectable.
Some users can select the items.
Does anybody have a idea?
Thanks
Michael

I THINK SOME TRANSACCTION VARIANT HAVE BEEN CREATED FOR THAT JUST CHECK IN SHD0 FOR THAT TCODE FOR A PERTICULAR GROUP OF USER.
REGARDS
SHIBA DUTTA

How do I delete items in iCloud to free up cloud memory?

I just "opened" an iCloud account and find that the amount of memory used is almost at the limit of free memory. I'm only interested in synching my Contacts and Calender data. How do I see exactly what is my iCloud and delete items not needed in the cloud?

Click here for information.
(111176)

Scene selection button disappeared forever

After struggling fruitlessly with DVD studio pro, (which refused to make a DVD that played on any machine other than my iMac,) I was forced to switch to iDVD, which behaves at least half-competently. I was editing a project and deleted the scene selection button that is generated automatically when importing a movie with chapter markers.
I saved the project and exited to re-export the movie, (several times, because final cut keeps finding ways to screw me over as well,) and when I went to re-import the movie, the scene selection button refused to appear. I tried restarting the program, deleting the project file, but it appears that the scene selection submenu is gone forever. What the hay apple? Why is it so easy to destroy functions in your applications?
Message was edited by: Anger44

Have you tried making a new idvd project? The scene selection should return ina new project. I am guessing that you made a quicktime movie with chapter markers from FCP or FCE. Open a new idvd project with a new name. Drag your QT movie into any area of the dvd widow except the drop zone. It should now say play movie and scene selection. If it does, drag you QT movie of still frame or whatever into the drop zone and burn. If it doesn't then you will need to delte your pref file found in the library to reset idvd to factory defaults.
If this doesn't work post your workflow. How are you exporting your movie to IDVD?

How to make an itemrenderer not selectable for TileList

Hey everyone,
                      I have a custom renderer foe a TileList which displays a 3x3 grid. The items get be moved around to sort the list. Sometimes the collection may have only 7 items so I need to to create 2 more additional renderers which represent the empty state of the itemrenderer. What I am trying to achieve is that when the user clicks the empty items the previous or current selected item does not loose focus, so in othe words I need to make the empty items not selectable so that the user can also not drag these items around.
| X | X | X |
| X | X | X |
| X | O | O|
Currently the way I detect if the item is selected or not by
override protected function updateDisplayList(unscaledWidth:Number, unscaledHeight:Number):void
   if(ListBase(owner).isItemSelected(data))
     //Show selected state
   else
     //Hide
Thanks,
Firdosh

Take a look at the Disabling List Selection post on my blog. It might help here.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

No exact match was found. Click the item(s) that did not resolve for more options. You can also use Select button to choose External Data.

HI,
I have SharePoint Online 2013 environment, i have created a external content type from wcf service. I want to use this as External Data column in document library. When i look for values in content type it populates and when i click any values and adds and
then click saves it shows the below error
No exact match was found. Click the item(s) that
did not resolve for more options. You can also use Select button to choose External Data
__fkc000950056003700kc000950056003700kc000e400f2001400kc000950056003700k830035004700160027004700d20057000700020064009600870056004600:
No Matching Items
Please help on this.
varinder

I don't understand the question exactly, could you restate it. Sorry mate, I might just be braindead.
But, as far as the issue, it is by design. the column is a lookup columns which essentially ties to the external data. if that data is removed, the column on your simple list becomes invalid and any edits of the simple list item will require
it to be changed.
are you wanting to make the ECT read only? that's simple enough. you can pop open SPD and edit the ECT, then remove the C/E/D operations (create/update/delete). That will not, however make it read-only in any other systems that access that
external data, as I assume its not just SP or else it wouldn't be external
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Delete items not selected button

Similar Messages

Maybe you are looking for