Delete or replace (NOT append) TDMS Channel data

Is there a way to delete channel data that has already been written to a TDMS file?
Just writting the new data tot channel data appears to append the new to the old.
I don't see a way of deleting OR replacing the old dat with the new.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Solved!
Go to Solution.

Jarrod S. wrote:
You know what's sad, Ben, is I was the one who wrote those TDM -> TDMS and TDMS -> TDM conversion VIs that the poster used in the example to delete a TDMS channel.
All is not lost.
Repost with a link to the same solution. That way I can mark your new reply so new users will find the example with a double bonus of you re-taking that solution and picking up some more Kudos along the way.
Go for it!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Not appending

Hi all,
Pls help on below sample code.
It is not appending all the data from table marc.
only last entry is filling in the internal table . Pls check
tables : mara.
select-options : matnr for mara-matnr.
data : begin of itab occurs 0,
       matnr like mara-matnr,
       ernam like mara-ernam,
       end of itab.
data : begin of mtab occurs 0,
       werks like marc-werks,
       end of mtab.
data : wa like itab.
select matnr from mara into table itab where matnr in matnr.
loop at itab.
select werks from marc into table mtab where matnr = itab-matnr.
append mtab.
endloop.
Pls check

Mr. Ali,
        Here goes your solution :--
TABLES: MARA.
SELECT-OPTIONS : MATNR FOR MARA-MATNR.
DATA: BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
ERNAM LIKE MARA-ERNAM,
END OF ITAB.
DATA: BEGIN OF MTAB OCCURS 0,
            MATNR LIKE MARC-MATNR,
             WERKS LIKE MARC-WERKS,
            END OF MTAB.
DATA: WA_ITAB LIKE LINE OF ITAB.
START-OF-SELECTION.
SELECT MATNR ERNAM FROM MARA INTO TABLE ITAB WHERE MATNR IN MATNR.
SELECT WERKS FROM MARC INTO TABLE MTAB FOR ALL ENTRIES IN ITAB WHERE MATNR = ITAB-MATNR.
          Now loop at any table to get the data.

PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver. Deleting bad driver file in adobe program data does not fix the problem, it simply replaces the text file and crashes again. My video driver

PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver. Deleting bad driver file in adobe program data does not fix the problem, it simply replaces the text file and crashes again. My video driver is just fine. Any help out there?

rb
Your video card driver may be fine for something, but just not compatible with Premiere Elements 13/13.1.
For those with the display card error, the answers include
a. assure your video card/graphics card driver version is up to date according to the web site of the manufacturer of the card -
if necessary consider a driver roll back.
b. determine in Device Manager/Display Adapters if the computer is using 2 cards instead of 1
c. delete the BadDrivers.txt file
the rationale for that deletion is found in post 10 of the following older post...principle applies to 13 as well as 9.
Re: Premiere Elements 9 Tryout Serious Display Problem
Have you looked for computer ATI card settings that might be more compatible with Premiere Elements 13/13.1?
When is the program crashing - just opening a new project or rather crashing if editing a particular video format at the Timeline level?
ATR

JDBC sender channel running but not picking up the data from sp

Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.

Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well

I have a replacement Note 3. My Vodafone SIM, which worked fine in the original, fails in the replacement. When I try to access Settings, the menu briefly flashes, then the phone reverts to the home page. Will a Factory Data Reset fix this?

Hi,
I have a Note 3 and a Vodafone SIM that are not playing well together.
The history is:
I got my Note 3 over 2 years ago. We visited Italy 2 years ago and I bought a Vodafone sim at a Vodafone outlet. Everything worked perfectly during that trip and a subsequent trip to France.
Last October, I had to replace the Note 3 because the camera was failing. I had insurance, so the insurance company sent me a refurbished Note 3. When I tried to use the SIM last December, the Note 3 had problems. When I put the SIM in and started the Note 3, the phone recognized the sim (but gave me an error that, according to Verizon, is spurious). I could make phone calls but I could not access the data network. In order to access the data network, you have to go into Settings. More Settings, Mobile Networks and set the Access Point Name.
With the replacement Note 3, I cannot access Settings. As soon as I try to access Settings (with the Vodafone SIM installed), the Settings menu appears and then immediately the home screen comes up. After working with Verizon for over an hour, I was able to get into Settings and set the access point name by booting into Safe mode. But as soon as I rebooted into 'normal' mode, Settings failed and I could not access its menu (to turn on wifi, for example). There are a couple of other apps that did the same thing - but I cannot remember which ones.
I have talked to Vodafone - they have no clue. I talked to a Samsung rep I ran into at Best Buy, he thought the Vodafone SIM might be corrupted. And now a Verizon tech I talked to last week thinks it is a firmware problem on the phone and I should do a Factory Data Reset.
Have you ever heard of this problem? What do you think might be causing it?
Thanks for your help.

On2CO, I'm glad you have reached out to us today. Thank you so much for the very detail description on what is going on with the device. Sounds like there might be an issue with an application that might be causing these issues. The reason I say that is, when the phone is in Safe Mode you are able to access the Settings screens with no issues. While in Safe Mode that does block all 3rd party applications from running on the phone. I would suggest on trying to back up the device and perform a factory reset: http://spr.ly/6-182Vuo (you would want to make sure to uncheck Automatic Restore in step 3). Once the reset is complete try to see if you can get into Settings. Then, I would recommend on adding 3rd party applications back on to the device one by one to see if we can find what app might be causing this issue. Please keep us posted if you have any further questions or concerns. KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

HT204053 How can I delete my iCloud account which I do not remember anything about the information that I entered about 4 years ago. It always asks my birth date but it seems I did not enter my correct date how can I bypass this question???

How can I delete my iCloud account which I do not remember anything about the information that I entered about 4 years ago. It always asks my birth date but it seems I did not enter my correct date how can I bypass this question???

You cannot delete the account from the server (partly to prevent the username from becoming available again and some-one else using it to pretend to be you).. Having disengaged your devices from it, go to http://icloud.com and delete any data in there such as contacts and calendars. Then just ignore it.

HP Mediasmart DVD on a6750t will not output 5.1 channel data via SPDIF or HDMI

So I got a new customized HP desktop on Friday. Started to play with it on Saturday. I called Sunday morning to request an RMA number and return shipping label. Here is my saga:
Started HP issue calls at 3:47am FEB 15th 2009
Gion (per rep spelling) stated return will be handled through warrantee/support department). He stated HP does not allow them to release a badge number. Ticket# xxxxxx3374.
(Transferred to warrantee/support department)
(The line was full of static- asked for the 800 to call back. Person said he didn’t have the number I called in on. Had to log on to www.hp.com. Found the number to call was 1 (800) 474-6836. I called this number.)
Satya (per rep spelling) answered the line. I informed rep that I am not receiving any 5.1 output from the Blu-ray disk software that was provided by HP (HP Mediasmart DVD). Advised him that all MS products, DVD's, and HD devices were sending 5.1 channel output to my Yamaha receiver. [DVD’s are the important part. As the same drive is used for BOTH DVD and Blu-Ray, it is my opinion that the hardware is working fine.] I reiterated many times that the only thing not sending 5.1 channel data was the HP MediaSmart DVD software player for Blu-Ray disks.
Satya ran various tests and wanted to “call back tomorrow with a solution“. He seemed to think that perhaps there was a problem with hardware and possibly I had not received something in my order.
I clearly started I wanted a RMA number and I wanted to return the product. Satya refused saying he had to "research" the problem before he could issue the RMA number and return the product. He said he would call me between 2pm and 5pm tomorrow (MST) (I informed him it was currently 4:49 am at my location.)
The problem is not with the hardware. All Microsoft software products that offer 5.1 channel support are sending via SPDIF (optic cable) 5.1 channel data. Again, all DVDs and other 5.1 devices (HD PVR) are sending (via SPDIF) 5.1 channel data to my Yamaha receiver. The only thing not outputting in 5.1 is the Blu-ray disk software player (HP Mediasmart DVD). DVD’s are ran using the Blu-ray drive (only one on the system) and are sending 5.1 channel data with no issues.
Ended HP issue calls 4:52am FEB 15th 2009
So, any other suggestions? I have tried various things like HDMI-Passthrough, HDMI-PCM, SPDIF, and 6 speaker output on the HP MediaSmart DVD Blu-ray software player application to no avail.
This question was solved.
View Solution.

FEB 16th 2009 1:15 am
Decided to try some trial Blu-ray programs to see if this issue can indeed be resolved with a different software package.
Corel’s WinDVD9 would not play a Blu-ray disk. I received no errors. The program loaded the disk, after about 10 seconds stopped and went back to the main screen.
Cyberlink PowerDVD had a trial limitation that does not allow Blu-ray disk playback.
ArcSoft TotalMedia Theater (TMT) works flawlessly. Outputs in 5.1 surround with no issues, therefore my assumption that it’s a software issue is correct.
Due to the problem being software related, I will call HP to see if there is a way they can send me a different Blu-ray software player. I like the system and do not really want to ship this back to HP. There is a sale tomarrow and I might even buy another system for my mother if HP will work this out.
HP call start at 2:06 am FEB 16th 2009
Called 1 (800) 474-6836. Satya answered the line. He asked if his supervisor had called me. I stated no, I had only received his call at 7:47pm and I had placed a call to Bridgette at 8:37 pm for a RMA number and shipping label.
I advised him I was willing to try and work with HP now that I found it was indeed a software issue. I asked him if there was a possibility of getting a different software player that would work with my setup. I advised that on my own I found that ArcSoft TotalMedia Theater (TMT) trial version works (based on me installing a trial version). Its my understanding that HP provides many software titles from ArcSoft including a MediaConverter I also purchased for the desktop.
He placed me on hold to find out.
He said HP doesn’t carry or support ArcSoft TotalMedia Theater. He said he would have a supervisor call me back within 24 hours with a solution. I advised him to stop the RMA. He stated an RMA had not been issued yet. I gave him the RMA number I had and advised I had received a shipping label via email from Bridgette per my earlier call. He placed me back on hold to check.
He said he cancelled the RMA and would have a supervisor call me back between 2pm - 5pm (within 24 hours).
Call ended at 2:34 pm FEB 16th 2009
I am guessing that HP support is not enpowered to solve a problem like mine. I would have been willing to work out something with HP but its is seeming more and more that HP really doesnt want my business. The issue here is software limitation PLAIN AND SIMPLE. I paid (in part) for a Blu-ray player that would play Blu-ray disks and output sound in 5.1. The TRIAL version of ArcSoft TotalMedia Theater works fine. Therefore the hardware is fine.
Without a different software player shipped to me OR me buying the ArcSoft TotalMedia Theater software for 80 dollars, I am forced to listen to Blu-ray disks in 2 channels. I would like to work with HP but if HP will not work with me then I have no choice than to return the product.

Copy opening does not clear the destination data - Just appends

Hi All,
Copy opening does not clear the destination data. It just appends so if i run the copy opening package twice i can see the signed data get doubled.
We have SAP BPC NW 7.5 SP08 Patch 1001.
I working on the Periodic Application.
Copy opening Script logic:
*FOR %TIME% = %TIME_SET%
*RUN_PROGRAM COPYOPENING
CATEGORY = %CATEGORY_SET%
CURRENCY = %CURRENCY_SET%
TID_RA = %TIME%
OTHER = [B_ENTITY=%B_ENTITY_SET%]
*ENDRUN_PROGRAM
*NEXT
Carry-forward business rules
Source account : BALANCE SHEET ACCOUNTS
Source flow : F99
Dest account :
Dest flow : F00
Reverse sign : FALSE
Data source type : ALL
Same period      :FALSE
Apply to YTD : False
Category dimension:
ID               ACTUAL               BUDGET
EVDESCRIPTION          Actual               BUDGET
PARENTH1
YEAR               2008               2011
COMPARISON          BUDGET               NBUDGET
STARTMTH               1               1
CATEGORY_FOR_OPE                    ACTUAL
FX_SOURCE_CATEGORY
RATE_CATEGORY
RATE_YEAR
RATE_PERIOD
FX_DIFFERENCE_ONLY
OPENING_YEAR
OPENING_PERIOD
OWNER               [ADMIN]               [ADMIN]
STORED_CALC
REVIEWER_CAT
Appreciate any help.
Regards
Mehul

Snote 1620613 has fixed the issue
Regards
Mehul

TDMS file viewer is not showing all channels

Hiya,
My personal tutor suggested that I should put a message on forums as we couldn't find the solutions.
We've created TDMS write and read vis where in TDMS write, some emulated data is streamed into TDMS write file via queues. As in attached VIs, there are only six channels but we might be having more than 20 to show on TDMS file viewer.
So the problem is when we run the TDMS write vi, trigger it with horizontal toogle on front panel, stop the TDMS write and go back to view the file on TDMS read, only the first channel data shows up. Also, we couldn't find the better way to stop the TDMS write vi than to abort it.
Could anybody help us please!
Ta
Attachments:
write.vi ‏29 KB
read.vi ‏12 KB

About the problemous stop, I advice you to run your code with 'Execution Highligting' on.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

I cant change my apple ID because my linked e mail address is corporate and is not longer active, how can I delete and replace for mew one

Does anyone knows how can delete the current I cloud ID form my I phone 5, because the linked e mail is not longer active, because it was a corporate account and i am not working with that company.

Go to Settings>iCloud, turn off Find My iPhone and provide the password when prompted. Then change the primary email address associated with the ID as explained here: Change your Apple ID. After making the change, save any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. Then go to Settings>iCloud, tap Delete Account, choose Delete from My iPhone when prompted (your data will still be in iCloud), then sign back in with the updated ID.

Delete statement is not working.

Hi,
find the code. Here the delete statement is not working and i am getting sy-subrc = 4. although ,
xe1edp10-idnkd = 34596 and dint_edidd -sdata = 34596.
please help me ...
loop at dekek_x.
loop at dint_edidd where segnam = 'E1EDP10'.
if dekek_x-stpin = 1 .
CLEAR xe1edp10.
MOVE dint_edidd-sdata TO xe1edp10.
delete dint_edidd where sdata = xe1edp10-idnkd.
endif.
endloop.

1st thing..
i tried this :
tables: edidd, e1edp10.
edidd-sdata = '315934 EA 017'.
WRITE edidd-sdata.
move edidd-sdata to e1edp10.
IF edidd-sdata = e1edp10-idnkd.
WRITE: e1edp10-idnkd.
else.
WRITE: 'nothing'.
ENDIF.
output
>315934 EA 017
>315934 EA 017
2nd thing,.
your loop inside loop doesnt make any sense as they are not related any where.
3rd thing:
the fields are not type compatible.. this might be the reason for wrong delete statement..
and 1 more clarification:
TABLES: edidd, e1edp10.
DATA :it TYPE TABLE OF edidd WITH HEADER LINE.
edidd-sdata = '315934 EA 017'.
WRITE edidd-sdata.
APPEND edidd TO it.
edidd-sdata = '315934 EA 018'.
APPEND edidd TO it.
LOOP AT it." where segnam = 'E1EDP10'.
CLEAR e1edp10.
MOVE it-sdata TO e1edp10.
DELETE it WHERE sdata = e1edp10-idnkd.
ENDLOOP.
in this also delete is working perfectly fine... you run and check..

Sql Loader by using shell script, not able to insert data

Hi,
I am trying to dump the data by using shell script.(in shell script i am having sqlldr command)(its a host excutable method cocurrent program)
When i am loading the data, by placing my files(.ctl,.prog,.csv,symbolink file for .prog) in $Custom_top/bin, it is loading exactly. 17000 records inserted.
But if i am loading the data by placing my files in $custom_top/custom_folders. unable to insert total data. only 43 records inserting.
Please any one can help me.
Thanks in advance.
Rama.

Srini, Thanks a lot for ur reply,
Oracle Apps version R12,
Microsoft windows XP profissional
Version 2002 service Pack 3
My Control file Script is:
load data
infile '$XADP_TOP/data/CPIU/in/XXOKS_Price_Increase.csv'
append
into table XXOKS_CONTRACT_PRICE_INCR_DTLS
fields terminated BY ',' optionally enclosed by '"'
TRAILING NULLCOLS
(EXCLUSION_FLAG,
LEGACY_NUMBER,
CUSTOMER_NUMBER,
CUSTOMER_NAME,
REQUEST_ID,
CONTRACT_NUMBER,
CONTRACT_START_DATE,
CONTRACT_END,
REQUEST_LINE_ID,
LINE_START_DATE,
LINE_END_DATE,
ITEM_NUMBER,
ITEM_DESCRIPTION,
UNIT_PRICE,
QTY,
NEW_UNIT_PRICE,
LINE_AMOUNT,
NEW_LINE_AMOUNT,
PRICE_INCREASED_DATE,
PERCENTAGE_INCREASED,
ORIGINAL_CONTRACT_AMOUNT,
NEW_CONTRACT_AMOUNT,
PRICE_INCREASE_AMOUNT)
My .prog File is: Please fidn that i created symbolink file also for my .prog.
if [ -z $XADP_TOP ];then
echo "XADP_TOP environment variable is not set!"
exit 1
fi
cd $XADP_TOP/data/CPIU/in
DATE=`date +%y%m%d:%H%M`
i_program_name="$0"
i_ora_pwd="$1"
i_user_id="$2"
i_user_name="$3"
i_request_id="$4"
i_ftp_host_name="$5"
i_ftp_user_name="$6"
i_ftp_user_password="$7"
ftp_prog() {
# FTP Function to reuse the FTP Commands
if [ $# -ne 6 ];then
echo "Usage : ftp_prog <Hostname> <User name> <Password> <Remote Directory> <command> <filename>"
exit 2
fi
l_ftp_host_name="$1"
l_ftp_user_name="$2"
l_ftp_user_password="$3"
l_ftpdir="$4"
l_ftp_command="$5"
l_ftp_filename="$6"
ftp -v -n ${l_ftp_host_name} <<EOF
user ${l_ftp_user_name} ${l_ftp_user_password}
ascii
cd ${l_ftpdir}
${l_ftp_command} ${l_ftp_filename}
quit
EOF
#exit $?
# setting the ftp directory
#ftpdir="/`echo ${TWO_TASK:-$ORACLE_SID}|tr "[A-Z]" "[a-z]"`/CPIU"
##ftpdir="/FinTEST/quoting/PS/ar"
ftpdir="$XADP_TOP/data/CPIU/in"
# setting the in directory and out directory
indir="$XADP_TOP/data/CPIU/in"
outdir="$XADP_TOP/data/CPIU/out"
ftp_prog ${i_ftp_host_name} ${i_ftp_user_name} ${i_ftp_user_password} ${ftpdir} get XXOKS_Price_Increase.csv
echo $ftpdir
echo "Converting the data file into unix mode"
dos2unix XXOKS_Price_Increase.csv XXOKS_Price_Increase.csv
chmod 777 XXOKS_Price_Increase.csv
cd $XADP_TOP/bin
echo "Trying to excute sqlldr and entering into the into control file"
$ORACLE_HOME/bin/sqlldr userid=$i_ora_pwd control=XXOKS_PRICE_INCR_LOAD log=$XADP_TOP/log/XXOKS_PRICE_INCR_LOAD_${DATE}.log;
exit_status=$?
echo "Checking the status and giving permissions to the data file which in in dir"
if [ $exit_status -eq 0 ]; then
cd $XADP_TOP/data/CPIU/in
chmod 777 XXOKS_Price_Increase.csv
echo "try to move data file into out dir"
# Moving the file to out directory
mv XXOKS_Price_Increase.csv ${outdir}/XXOKS_Price_Increase.csv_${DATE}
#echo "ready to zip file in out dir step6"
# Zipping the file
#gzip -f ${outdir}/XXOKS_Price_Increase.csv_${DATE}
echo "deleting the file which is in dir"
# Deleting the file from in directory
/bin/rm -f ${indir}/XXOKS_Price_Increase.csv
# Deleting from the remote directory
ftp_prog ${i_ftp_host_name} ${i_ftp_user_name} ${i_ftp_user_password} ${ftpdir} delete XXOKS_Price_Increase.csv
echo "sqlloader finished successfully."
else
echo "Error in loader"
##echo "Loader error in Price Increase Detials File ${i_file}"
fi
exit $exit_status
And My Log file Comments are
SQL*Loader: Release 10.1.0.5.0 - Production on Thu Dec 3 01:32:08 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: XXOKS_PRICE_INCR_LOAD.ctl
Data File: /oesapp/applmgr/GIS11/apps/apps_st/appl/xadp/12.0.0/data/CPIU/in/XXOKS_Price_Increase.csv
Bad File: XXOKS_Price_Increase.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table XXOKS_CONTRACT_PRICE_INCR_DTLS, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
EXCLUSION_FLAG FIRST * , O(") CHARACTER
LEGACY_NUMBER NEXT * , O(") CHARACTER
CUSTOMER_NUMBER NEXT * , O(") CHARACTER
CUSTOMER_NAME NEXT * , O(") CHARACTER
REQUEST_ID NEXT * , O(") CHARACTER
CONTRACT_NUMBER NEXT * , O(") CHARACTER
CONTRACT_START_DATE NEXT * , O(") CHARACTER
CONTRACT_END NEXT * , O(") CHARACTER
REQUEST_LINE_ID NEXT * , O(") CHARACTER
LINE_START_DATE NEXT * , O(") CHARACTER
LINE_END_DATE NEXT * , O(") CHARACTER
ITEM_NUMBER NEXT * , O(") CHARACTER
ITEM_DESCRIPTION NEXT * , O(") CHARACTER
UNIT_PRICE NEXT * , O(") CHARACTER
QTY NEXT * , O(") CHARACTER
NEW_UNIT_PRICE NEXT * , O(") CHARACTER
LINE_AMOUNT NEXT * , O(") CHARACTER
NEW_LINE_AMOUNT NEXT * , O(") CHARACTER
PRICE_INCREASED_DATE NEXT * , O(") CHARACTER
PERCENTAGE_INCREASED NEXT * , O(") CHARACTER
ORIGINAL_CONTRACT_AMOUNT NEXT * , O(") CHARACTER
NEW_CONTRACT_AMOUNT NEXT * , O(") CHARACTER
PRICE_INCREASE_AMOUNT NEXT * , O(") CHARACTER
value used for ROWS parameter changed from 64 to 43
Table XXOKS_CONTRACT_PRICE_INCR_DTLS:
43 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 255162 bytes(43 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 43
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Thu Dec 03 01:32:08 2009
Run ended on Thu Dec 03 01:32:08 2009
Elapsed time was: 00:00:00.19
CPU time was: 00:00:00.04
Plz srini help me.
Thanks in advance
Rama..

Photoshop cs5 is not appending file extensions

in previous versions, photoshop appended to the file extension in the fiel save/save as dialog box. it no longer does this and when you save a file it does not append the file extension to the file name, resulting in unknown fiel type.
i am running windows 7 64-bit with photoshp cs5.
it does not make any since to have the option of appending the file extension if the program is not going to do it.
system info from photosho:
Adobe Photoshop Version: 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch]) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 2195 MHz
Built-in memory: 16361 MB
Free memory: 11097 MB
Memory available to Photoshop: 14709 MB
Memory used by Photoshop: 74 %
Image tile size: 1024K
Image cache levels: 6
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: False.
OpenGL Crash File: Not Detected.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 560M/PCI/SSE2
Display: 2
Display Bounds:= top: 0, left: 1600, bottom: 1200, right: 3200
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 900, right: 1600
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 560M
Driver Version: 8.17.12.6837
Driver Date: 20110427000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1600 x 900 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 560M
Video Card Memory: -2047 MB
Serial number: 91198138241777799091
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\
Temporary file path: C:\Users\Owner\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
J:\, 440.8G, 301.0G free
H:\, 931.5G, 745.1G free
E:\, 232.9G, 59.9G free
D:\, 232.9G, 129.3G free
C:\, 440.8G, 301.0G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2010/10/04-23:36:11   64.441628   64.441628
   adbeape.dll   Adobe APE 2010/02/23-12:40:58   61.421986   61.421986
   AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0
   AdobeOwl.dll   Adobe Owl 2010/06/03-13:43:23   3.0.93   61.433187
   AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
   AdobePDFL.dll   PDFL 2010/12/13-23:37:10   64.341419   64.341419
   AdobePIP.dll   Adobe Product Improvement Program   5.0.0.2021
   AdobeXMP.dll   Adobe XMP Core   5.0   61.134777
   AdobeXMPFiles.dll   Adobe XMP Files   5.0   61.134777
   AdobeXMPScript.dll   Adobe XMP Script   5.0   61.134777
   adobe_caps.dll   Adobe CAPS   3,0,116,0
   adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   1.0.0.64 (BuildVersion: 1.0; BuildDate: Mon Jan 26 2010 21:49:00)   1.000000
   AFlame.dll   AFlame 2010/02/23-17:27:33   61.421976   61.421976
   AFlamingo.dll   AFlamingo 2010/02/23-17:27:33   61.421978   61.421978
   AGM.dll   AGM 2010/10/04-23:36:11   64.441628   64.441628
   ahclient.dll    AdobeHelp Dynamic Link Library   1,5,0,30
   aif_core.dll   AIF   2.0   53.422628
   aif_ogl.dll   AIF   2.0   53.422628
   amtlib.dll   AMTLib (64 Bit)   3.0.0.64 (BuildVersion: 3.0; BuildDate: Mon Jan 26 2010 21:49:00)   1.000000
   amtservices.dll   AMTServices (64 Bit)   3.0.0.64 (BuildVersion: 3.0; BuildDate: Mon Jan 26 2010 21:49:00)   1.000000
   ARE.dll   ARE 2010/10/04-23:36:11   64.441628   64.441628
   asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1
   AXE8SharedExpat.dll   AXE8SharedExpat 2010/02/23-17:27:33   61.421978   61.421978
   AXEDOMCore.dll   AXEDOMCore 2010/02/23-17:27:33   61.421978   61.421978
   Bib.dll   BIB 2010/10/04-23:36:11   64.441628   64.441628
   BIBUtils.dll   BIBUtils 2010/10/04-23:36:11   64.441628   64.441628
   boost_threads.dll   DVA Product   5.0.0
   cg.dll   NVIDIA Cg Runtime   2.0.0015
   cgGL.dll   NVIDIA Cg Runtime   2.0.0015
   CoolType.dll   CoolType 2010/10/04-23:36:11   64.441628   64.441628
   data_flow.dll   AIF   2.0   53.422628
   dvaadameve.dll   DVA Product   5.0.0
   dvacore.dll   DVA Product   5.0.0
   dvaui.dll   DVA Product   5.0.0
   ExtendScript.dll   ExtendScript 2010/10/19-10:22:12   61.445301   61.445301
   FileInfo.dll   Adobe XMP FileInfo   5.0   61.134777
   icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   image_flow.dll   AIF   2.0   53.422628
   image_runtime.dll   AIF   2.0   53.422628
   JP2KLib.dll   JP2KLib 2010/12/13-23:37:10   64.181312   64.181312
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2, 0, 1, 11
   MPS.dll   MPS 2010/12/13-23:37:10   64.450375   64.450375
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.6161
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.6161
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.6161
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS5   CS5
   Plugin.dll   Adobe Photoshop CS5   CS5
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   2.0.0.746
   PSArt.dll   Adobe Photoshop CS5   CS5
   PSViews.dll   Adobe Photoshop CS5   CS5
   SCCore.dll   ScCore 2010/10/19-10:22:12   61.445301   61.445301
   tbb.dll   Threading Building Blocks   2, 1, 2009, 0201
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   1.0.0.68 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   1.0.0.68
   WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
   wu3d.dll   U3D Writer   9.3.0.113
Installed plug-ins:
   Accented Edges 12.0
   ADM 3.11x01
   Alien Skin Autolayer 4 4.0.0
   Alien Skin Blow Up 3 3.0.0
   Angled Strokes 12.0
   Average 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Bas Relief 12.0
   Blow Up 3.0.0
   BMP 12.0.2
   Camera Raw 6.6
   Chalk & Charcoal 12.0
   Charcoal 12.0
   Chrome 12.0
   Cineon 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Clouds 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Color Halftone 12.0.2
   Colored Pencil 12.0
   CompuServe GIF 12.0.2
   Conté Crayon 12.0
   Craquelure 12.0
   Crop and Straighten Photos 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Crop and Straighten Photos Filter 12.0.2
   Crosshatch 12.0
   Crystallize 12.0.2
   Cutout 12.0
   Dark Strokes 12.0
   De-Interlace 12.0.2
   Difference Clouds 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Diffuse Glow 12.0
   Displace 12.0.2
   Dry Brush 12.0
   Eazel Acquire 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Embed Watermark 4.0
   Extrude 12.0.2
   FastCore Routines 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Fibers 12.0.2
   Film Grain 12.0
   Filter Gallery 12.0
   Fresco 12.0
   Glass 12.0
   Glowing Edges 12.0
   Grain 12.0
   Graphic Pen 12.0
   Halftone Pattern 12.0
   HDRMergeUI 12.0
   IFF Format 12.0.2
   Ink Outlines 12.0
   JPEG 2000 2.0
   Lens Blur 12.0
   Lens Correction 12.0.2
   Lens Flare 12.0.2
   Lighting Effects 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Liquify 12.0.1
   Matlab Operation 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Measurement Core 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Mezzotint 12.0.2
   MMXCore Routines 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Mosaic Tiles 12.0
   Multiprocessor Support 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Neon Glow 12.0
   Note Paper 12.0
   NTSC Colors 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Ocean Ripple 12.0
   OpenEXR 12.0.2
   Paint Daubs 12.0
   Palette Knife 12.0
   Patchwork 12.0
   Paths to Illustrator 12.0.2
   PCX 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Photocopy 12.0
   Picture Package Filter 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Pinch 12.0.2
   Pixar 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Plaster 12.0
   Plastic Wrap 12.0
   PNG 12.0.2
   Pointillize 12.0.2
   Polar Coordinates 12.0.2
   Portable Bit Map 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Poster Edges 12.0
   Radial Blur 12.0.2
   Radiance 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Read Watermark 4.0
   Reticulation 12.0
   Ripple 12.0.2
   Rough Pastels 12.0
   Save for Web & Devices 12.0
   ScriptingSupport 12.0.4
   Shear 12.0.2
   Smart Blur 12.0.2
   Smudge Stick 12.0
   Snap Art 3 3.0.0
   Solarize 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Spatter 12.0
   Spherize 12.0.2
   Sponge 12.0
   Sprayed Strokes 12.0
   Stained Glass 12.0
   Stamp 12.0
   Sumi-e 12.0
   Targa 12.0.2
   Texturizer 12.0
   Tiles 12.0.2
   Torn Edges 12.0
   Twirl 12.0.2
   Underpainting 12.0
   Vanishing Point 12.0
   Variations 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Water Paper 12.0
   Watercolor 12.0
   Wave 12.0.2
   WIA Support 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   Wind 12.0.2
   Wireless Bitmap 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
   ZigZag 12.0.2
Plug-ins that failed to load: NONE
Flash:
   Yale
   Gallery Wrapper
   Edge FX CS5
   Analog Photo FX
   Mini Bridge
   Kuler
   Access CS Live
   CS Review
   CS News and Resources
Installed TWAIN devices: NONE

krwebb wrote:
The operating system has no problems with the filenames ... it is Photoshop that is not handling the names correctly.
Just tried this out on my Windows 7 64 bit system, and I get the same results using Photoshop.
When I save a file in Photoshop CS5 64 bit with the name 047. Crayon - Abstract the file is saved as 047. Crayon - Abstract without a file extension, no matter what document type I select in the drop-down.
In Word I get the expected result:
When I save a file in Word with the name 047. Crayon - Abstract the extension is automatically added (047. Crayon - Abstract.docx)

Error 7 occurred at Open/Create/Replace File in Open Config Data.vi

I have a .vi that was working fine with Labview 7.0. I now have upgraded to Labview Professional 8.0, and I am trying to build a stand alone executable. When I build the executable, build an installer, and then try to install it on another computer then run it......... I get the "Error 7 occurred at Open/Create/Replace File in Open Config Data.vi" error. Any ideas?

Hello,
In addition to the LabVIEW Help, there is an Application Note on Distributing Applications with the LabVIEW Application Builder and a knowledge base article What Is The Build Specification Feature In Application Builder? that might be helpful.
Also, here
is a knowledge base article on what Dennis has described and it
provides an example to call an extra Strip Path function. Also, instead
of using a Match Pattern function, you could use the App.Kind property
node (use Open Application Reference, Property Node: Application ->
Kind, and Close Reference) to determine if you are running in a
Run-time system.
Good luck and best regards,
Shakhina P.
Applications Engineer
National Instruments

Not able to get data while executing in background for mb52

Dear all,
my requirement is i want to schedule the zreport for every 1 hour.but proble is when iam executing in fore ground iam able to get data.but when iam going to scheduling this iam not able to get data.
my code is
type-pools:slis.
data zbudat type RANGE OF budat.
data wab like line of zbudat.
data zmatkl type RANGE OF MATKL.
data waz like line of zMATKL.
data zwerks type RANGE OF werks.
data wax like line of zwerks.
waz-sign = 'I'.
waz-low = 'CRUDE'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
waz-sign = 'I'.
waz-low = 'SGO'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
*waz-sign = 'I'.
*waz-low = 'FINES'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'LUMPS'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'UFO'.
*waz-option = 'EQ'.
*append waz to zmatkl.
wax-sign = 'I'.
wax-low = 'BIMI'.
wax-option = 'EQ'.
append wax to zwerks.
clear wax.
wax-sign = 'I'.
wax-low = 'BIPL'.
wax-option = 'EQ'.
append wax to zwerks.
*waz-sign = 'I'.
waz-low = 'C'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'S'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'UC'.
*waz-option = 'CP'.
*append waz to zmatnr.
*waz-sign = 'I'.
waz-low = 'F'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'L'.
*waz-option = 'CP'.
*append waz to zmatnr.
types:begin of w_tab,
       bwkey type werks_d,
       matnr type matnr,
        lgort type LGORT_D,
        budat type budat,
        labst type labst,
       endmenge type p decimals 3,
      end of w_tab.
      DATA : IT_TAB TYPE STANDARD TABLE OF W_TAB WITH HEADER LINE .
FIELD-SYMBOLS: <gt_fieldcat> TYPE slis_fieldcat_alv,
<gt_report_list> TYPE w_tab .
field-symbols <lt_pay_data> type any table.
*FIELD-SYMBOLS : <LT_DATA> LIKE LINE OF IT_TAB .
FIELD-SYMBOLS : <LT_DATA> type any .   " i have chaged it
data lr_pay_data type ref to data.
cl_salv_bs_runtime_info=>set( exporting display = abap_false
metadata = abap_false
data = abap_true ).
****SUBMIT ZQM_GR_BARGE_LOADING WITH S_date in zbudat with s_werks in zwerks with p_pend = ' ' AND RETURN .
submit RM07MLBS with MATKLA in zmatkl with werks in zwerks
"with XVBST = 'X'
using selection-SCREEN '1000' and return.
try.
cl_salv_bs_runtime_info=>get_data_ref( importing r_data = lr_pay_data ).
assign lr_pay_data->* to <lt_pay_data>.
catch cx_salv_bs_sc_runtime_info.
message `Unable to retrieve ALV data` type 'E'.
endtry.
cl_salv_bs_runtime_info=>clear_all( ).
data: obj_s type ref to ZKMINCO_MINESTOCKFROM_SAP_OUT.
create OBJECT obj_s.
data : output TYPE ZKMINMINESTOCKFROM_SAP1 ,
        record type ZKMINMINESTOCKFROM_SAP_REC_TAB ,
       wa_record like line of record.
LOOP AT <lt_pay_data> ASSIGNING <LT_DATA>.
MOVE-CORRESPONDING <LT_DATA> TO IT_TAB .
APPEND IT_TAB .
wa_record-STOCK_AS_ON_DATE = sy-datum .
wa_record-STOCK_AS_ON_TIME = sy-uzeit .
wa_record-PLANT_ID = it_tab-bwkey.
wa_record-STORAGE_LOC_ID = it_tab-lgort .
wa_record-MATERIAL = it_tab-matnr .
wa_record-STOCK_QTY = it_tab-labst.
append wa_record to record.
clear wa_record.
endloop.
output-MINESTOCKFROM_SAP-record = record .
CALL METHOD obj_s->MINESTOCKFROM_SAP_OUT
EXPORTING
    output = output .
commit work.
Thanks in advance.

Hi,
I assume that in your case you have two program lets say ZFOREGROUND and ZBACKGROUND (Called inside zforeground using submit statement)
zforeground has :
1. a input field to browse excel sheet or some file at the selection screen, and
2. button 'post all' to determine the background processing.
Now your requirement is such that you want zbackground to get scheduled as background job when post all button is clicked.
So, within the event AT USER-Command, check the sy-ucomm as that of post all button, if so write the following code to schedule the job:
DATA: jobname LIKE tbtcjob-jobname.
DATA :jobcount LIKE tbtcjob-jobcount,
host LIKE msxxlist-host.
DATA: BEGIN OF starttime.
INCLUDE STRUCTURE tbtcstrt.
DATA: END OF starttime.
DATA: starttimeimmediate LIKE btch0000-char1.
DATA: gv_job_dt TYPE sy-datum,
gv_job_tm TYPE sy-uzeit.
jobname = 'EXCLUSION_LISTING'.
gv_job_dt = sy-datum.
gv_job_tm = sy-uzeit.
Job open
CALL FUNCTION 'JOB_OPEN'
EXPORTING
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
IF sy-subrc NE 0.
"error processing
ENDIF.
Insert process into job
SUBMIT ZBACKGROUND AND RETURN
WITH p_file1 = gv_file_cust_exc "<----
Parameters which you want to pass to report zbackground from the report
WITH p_file2 = gv_file_win_deal "------zforeground
USER sy-uname
VIA JOB jobname
NUMBER jobcount.
IF sy-subrc ne 0.
"error processing
ENDIF.
Close job
starttime-sdlstrtdt = gv_job_dt.
starttime-sdlstrttm = gv_job_tm.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
EXCEPTIONS
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
OTHERS = 99.
IF sy-subrc EQ 0.
WRITE:/1 'JOB' COLOR 3,
jobname COLOR COL_GROUP,
'Scheduled in Background' COLOR 3. "error processing
gv_time = starttime-sdlstrttm.
gv_date = starttime-sdlstrtdt.
ENDIF.
Above code will schedule the report zbackground in background.
Note:
the program schduled in background will not be able to access any data present on your presentation server. data should be provided either by the program schhedulling it in foreground or it has to be thr in application server.
Regards,
Ravi

Delete or replace (NOT append) TDMS Channel data

Similar Messages

Maybe you are looking for