Delete selected text

How can I mark text in a JTextArea and delete the text with a JButton? Without pushing delete on the keyboard?

u can use this to delete the text, it will work as a delete key functionality:
and u can select the text programmaticaly with select(startIndex, endIndex) method
int dot = textarea.getCaret().getDot();
int mark = textarea.getCaret().getMark();
if(dot != mark)
textarea.getDocument().remove(Math.min(dot, mark), Math.abs(dot - mark));
else if(dot > 0)
textarea.getDocument().remove(dot - 1, 1);

Similar Messages

Delete Selection Text Issue

Hello All,
               I need to delete a selection text in a programm. The parameter does not exist anymore in the programm, when deleting i get this message:- (Page8 is the parameter)
Delimitation text PAGE8 is an original text and cannot be deleted or renamed
Message no. DS539
I am doing this as part of the manual post-implementation of a SAPNote.
Kind regards

Hi,
    under Adjust i get this message:-
Text elements J_3RTAXTEST modified. Text comparison can only be displayed.
Message no. DS575
The parameter is shown under the heading of   Editing action:      Delete unused selection texts
KInd regards

When I select text, system wide, and delete it, why is the succeeding text then selected?

When I select text, system wide, and delete it, why is the succeeding text then selected?
This doesn't happen all the time, but it's happened enough for me to notice it and get super annoyed by it.
Here's an example. If I have the following text:
The quick brown fox jumps over the lazy dog.
And I highlight quick brown and then press delete, I get: (The red shows the selected text)
The fox jumps over the lazy dog.
So when I then start typing, more text is removed than I want. Sometimes this effect carries over, so that the next couple words are selected once I start typing.
It's wonderfully annoying. So I was wondering if anyone else was experiencing such issues or if anyone might have an idea on how to get rid of this problem.
Thanks.

Ooops. I haven't updated my sig in a while. I'm on 10.8.2 and it happens on a late 2008 Alu Macbook.

When I app switch back to Photoshop, any selected text is deleted - Help!

When I app switch back to Photoshop, any selected text is deleted - in text elements or Inspector values.
I get the same behaviour in Dreamweaver, but not in any other applications (including Microsoft, Apple apps). I haven't tried in any other Adobe apps.
When I use another user account on my computer, I cannot replicate the problem.
I'm using Photoshop CS6 on Macbook Air running Mavericks.
Any ideas?

dude, it was bad news..
well i think u really lost ur work and data, so u need to redo again all the stuff...
and that's the reason i haven't upgrading my OS, bcoz I have the same issue I'm affraid that all my third apps lost.
next time u should buy HDD Ext so u can backup through time machine before upgrading OS.

Selection remains after deletion of text, unexpected text now selected

DW 13.2 build 6466
Mac OS X 10.9.3
Repro: Select characters or lines of text . Type of content (JS, CSS, HTML) is irrelevant. Delete the text.
Expected: text removed, without any text selected.
Actual: text removed, selection remains, but with new text selected (selection not removed).
Result: Unexpected text deleted (equal to the size of the selection).
Doesn't matter if I delete the text and then type a character, or just type a character to replace the selected text. I always lose the deleted part, and the character entry replaces the newly (mistakenly) selected text.
this is not the "my selected text got deleted" bug.
I've tried:
turning off voice/dication
rebooting
rebuilding site cache
removing user/configuration files
banging head on the table.
any suggestions are appreciated...
thanks,
Michael

Before a total reinstall using the cleaner tool: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
...it might be worth trying to restore preferences: Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
That'll sometimes catch things the program cache/personal config folder clearing misses since it wipes any user-added extensions that might be causing a conflict somewhere.

Can no longer select text in email template or read only field with mouse using IE or Firefox?

Hi Guys,
I can no longer select text in email template or read only field using my mouse in IE or Firefox anymore. We are using CRM 2011 rollup 18 applied with IE 11 and the latest version of Firefox. We only applied roll up 18 in Feb when this issue began.
Thanks
Dave
David Kelly

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?
These features rely on JavaScript, and it sounds as though you have scripting enabled if you get (the wrong) color changes. Some add-ons might alter the way scripts operate, so a standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode."
If those features work correctly, this points to one of your extensions or custom settings as the problem.
To also disable plugins, you can use this page:
orange Firefox button ''or'' classic Tools menu > Add-ons > Plugins category
Any change?

How to delete selected row in table control

Hi all,
here is my coding for deleting selected row.
But it is not working correctly.
I am not able to delete seleced row.
If i press delete button it automatically delete from beginning instead of selected rows.
Can anyone can help me plz...
CONTROLS rowdeleting TYPE TABLEVIEW USING SCREEN 100.
TABLES zdetails.
data : begin of itab occurs 0,
NAME TYPE ZDETAILS-NAME,
ADDRES TYPE ZDETAILS-ADDRES,
CONTACTNO TYPE ZDETAILS-CONTACTNO,
INIT TYPE C,
end of itab .
DATA OK_CODE LIKE SY-UCOMM.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'BACK'.
IF ITAB-INIT IS INITIAL.
SELECT NAME ADDRES CONTACTNO FROM ZDETAILS
INTO CORRESPONDING FIELDS OF TABLE ITAB.
DESCRIBE TABLE ITAB LINES rowdeleting-LINES.
ITAB-INIT = 'X'.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
MODULE CHANGE_SDYN_CONN OUTPUT.
READ TABLE itab INTO ZDETAILS INDEX rowdeleting-current_line.
ENDMODULE. " CHANGE_SDYN_CONN OUTPUT
MODULE READ_TABLE_CONTROL INPUT.
IF ITAB-INIT = 'X' AND OK_CODE = 'DELETE'.
DELETE ITAB index rowdeleting-current_line ."FROM ZDETAILS.
DESCRIBE TABLE ITAB LINES rowdeleting-LINES.
ENDIF.
ENDMODULE. " READ_TABLE_CONTROL INPUT
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'DELETE'.
IF ITAB-INIT = 'X' AND OK_code = 'DELETE'.
DELETE ITAB index rowdeleting-current_line .
ENDIF.
ENDCASE.
ENDMODULE.
regards ,
ranjith.

Hi,
Check the following code:
CONTROLS TABLE_CONTROL TYPE TABLEVIEW USING SCREEN 100.
TABLES SDYN_SDW4.
DATA SDYN_ITAB LIKE STANDARD TABLE OF SDYN_SDW4.
DATA INIT.
DATA OK_CODE LIKE SY-UCOMM.
DATA SAVE_OK LIKE SY-UCOMM.
DATA MARK.
DATA COL TYPE CXTAB_COLUMN.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'GRUND'.
SET TITLEBAR '100'.
IF INIT IS INITIAL.
Datenbeschaffung
   SELECT CARRID CONNID CITYFROM AIRPFROM CITYTO AIRPTO DEPTIME ARRTIME
            DISTANCE DISTID
            FROM SPFLI
            INTO CORRESPONDING FIELDS OF TABLE SDYN_ITAB.
    DESCRIBE TABLE SDYN_ITAB LINES TABLE_CONTROL-LINES.
    INIT = 'X'.
ENDIF.
ENDMODULE.                             " STATUS_0100 OUTPUT
*&      Module FILL_TABLE_CONTROL OUTPUT
      text
MODULE CHANGE_SDYN_CONN OUTPUT.
you can change the content of current table control line via
sdyn_conn
READ TABLE sdyn_itab INTO sdyn_conn INDEX table_control-current_line.
ENDMODULE.                             " FILL_TABLE_CONTROL OUTPUT
*&      Module READ_TABLE_CONTROL INPUT
      text
MODULE READ_TABLE_CONTROL INPUT.
Check input values
IF MARK = 'X' AND SAVE_OK = 'DELETE'.
    DELETE TABLE SDYN_ITAB FROM sdyn_sdw4.
    DESCRIBE TABLE SDYN_ITAB LINES TABLE_CONTROL-LINES.
ENDIF.
ENDMODULE.                             " READ_TABLE_CONTROL INPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK.
    WHEN 'SORT'.
      DATA: FLDNAME(100),HELP(100).
      READ TABLE TABLE_CONTROL-COLS INTO COL WITH KEY SELECTED = 'X'.
      SPLIT COL-SCREEN-NAME AT '-' INTO HELP FLDNAME.
      SORT SDYN_ITAB BY (FLDNAME).
ENDCASE.
ENDMODULE.                             " USER_COMMAND_0100 INPUT
*&      Module EXIT INPUT
      text
MODULE EXIT INPUT.
LEAVE PROGRAM.
ENDMODULE.                 " EXIT INPUT
Regards,
Bhaskar

How do you select text behind a shape in Pages 5.0?

I created a document in Pages 4.x in which I used rectangle outline shapes to create nice custom borders both for the page itself and for some contents in the body of document. (I've used text boxes before, but for this particular document the shapes worked much better and allowed for a look I couldn't achieve with text boxes.) Unfortunately, since updating to Pages 5.0, I can no longer select text within the shape spaces. In order to select and/or edit that text, I either have to delete the shapes first, or move them so that I can click inside the body of the document, and then use the arrows to get to the text I need to edit. This is very time-consuming. Is there an easier way to select text in the body of the document without having to move/delete the overlapping shape? This was easy to do in Pages 4.

Pablo,
Making the Shape or Text Box a Section Master will put it behind the text without having to delete or move it.
Arrange > Section Masters > Move Object to Section Master
and
Arrange > Section Masters > Move Object to Page
Jerry

Selection text frame in linked text frame remove

I chose in the text frame the linked text frames
get out of text and I want to delete a text frame
Is it possible that a command letter
same thing selecting the external can

Ok. Try now,
var doc = app.activeDocument;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "~a";
var found = app.selection[0].findGrep();
for(var i =found.length-1;i>=0;i--)
        var ip = found[i].insertionPoints[0];
        if(found[i].allPageItems[0] instanceof TextFrame)
                var cont = found[i].allPageItems[0].texts[0].duplicate(LocationOptions.AFTER,ip);
                found[i].remove();
Regards,
Chinna

How to catch selected text in JTable Column

Hi there,
I am learning JTable. Need help for How to get the selected text from the JTable Column which is set to be editable.
for example in JTextFiled you have method on getSelectedText(), is there any method for tracking the selected text.
Thanks in advance
Minal

Here's an example of the model I used in my JTable. Not the "getValueAt" method & "getRecordAt" method. You will have to have a Record object - but it only contains the attributes of an inserted record (with appropriate getters & setters). Hope this helps.
public class FileModel5 extends AbstractTableModel
public boolean isEditable = false;
protected static int NUM_COLUMNS = 3;
// initialize number of rows to start out with ...
protected static int START_NUM_ROWS = 0;
protected int nextEmptyRow = 0;
protected int numRows = 0;
static final public String file = "File";
static final public String mailName = "Mail Id";
static final public String postName = "Post Office Id";
static final public String columnNames[] = {"File", "Mail Id", "Post Office Id"};
// List of data
protected Vector data = null;
public FileModel5()
data = new Vector();
public boolean isCellEditable(int rowIndex, int columnIndex)
// The 2nd & 3rd column or Value field is editable
if(isEditable)
if(columnIndex > 0)
return true;
return false;
* JTable uses this method to determine the default renderer/
* editor for each cell. If we didn't implement this method,
* then the last column would contain text ("true"/"false"),
* rather than a check box.
public Class getColumnClass(int c)
return getValueAt(0, c).getClass();
* Retrieves number of columns
public synchronized int getColumnCount()
return NUM_COLUMNS;
* Get a column name
public String getColumnName(int col)
return columnNames[col];
* Retrieves number of records
public synchronized int getRowCount()
if (numRows < START_NUM_ROWS)
return START_NUM_ROWS;
else
return numRows;
* Returns cell information of a record at location row,column
public synchronized Object getValueAt(int row, int column)
try
FileRecord5 p = (FileRecord5)data.elementAt(row);
switch (column)
case 0:
return (String)p.file;
case 1:
return (String)p.mailName;
case 2:
return (String)p.postName;
catch (Exception e)
return "";
public void setValueAt(Object aValue, int row, int column)
FileRecord5 arow = (FileRecord5)data.elementAt(row);
arow.setElementAt((String)aValue, column);
fireTableCellUpdated(row, column);
* Returns information of an entire record at location row
public synchronized FileRecord5 getRecordAt(int row) throws Exception
try
return (FileRecord5)data.elementAt(row);
catch (Exception e)
throw new Exception("Record not found");
* Used to add or update a record
* @param tableRecord
public synchronized void updateRecord(FileRecord5 tableRecord)
String file = tableRecord.file;
FileRecord5 p = null;
int index = -1;
boolean found = false;
boolean addedRow = false;
int i = 0;
while (!found && (i < nextEmptyRow))
p = (FileRecord5)data.elementAt(i);
if (p.file.equals(file))
found = true;
index = i;
} else
i++;
if (found)
{ //update
data.setElementAt(tableRecord, index);
else
if (numRows <= nextEmptyRow)
//add a row
numRows++;
addedRow = true;
index = nextEmptyRow;
data.addElement(tableRecord);
//Notify listeners that the data changed.
if (addedRow)
nextEmptyRow++;
fireTableRowsInserted(index, index);
else
fireTableRowsUpdated(index, index);
* Used to delete a record
public synchronized void deleteRecord(String file)
FileRecord5 p = null;
int index = -1;
boolean found = false;
int i = 0;
while (!found && (i < nextEmptyRow))
p = (FileRecord5)data.elementAt(i);
if (p.file.equals(file))
found = true;
index = i;
} else
i++;
if (found)
data.removeElementAt(i);
nextEmptyRow--;
numRows--;
fireTableRowsDeleted(START_NUM_ROWS, numRows);
* Clears all records
public synchronized void clear()
int oldNumRows = numRows;
numRows = START_NUM_ROWS;
data.removeAllElements();
nextEmptyRow = 0;
if (oldNumRows > START_NUM_ROWS)
fireTableRowsDeleted(START_NUM_ROWS, oldNumRows - 1);
fireTableRowsUpdated(0, START_NUM_ROWS - 1);
* Loads the values into the combo box within the table for mail id
public void setUpMailColumn(JTable mapTable, ArrayList mailList)
TableColumn col = mapTable.getColumnModel().getColumn(1);
javax.swing.JComboBox comboMail = new javax.swing.JComboBox();
int s = mailList.size();
for(int i=0; i<s; i++)
comboMail.addItem(mailList.get(i));
col.setCellEditor(new DefaultCellEditor(comboMail));
//Set up tool tips.
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Click for mail Id list");
col.setCellRenderer(renderer);
//Set up tool tip for the mailName column header.
TableCellRenderer headerRenderer = col.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer)
((DefaultTableCellRenderer)headerRenderer).setToolTipText(
"Click the Mail Id to see a list of choices");
* Loads the values into the combo box within the table for post office id
public void setUpPostColumn(JTable mapTable, ArrayList postList)
TableColumn col = mapTable.getColumnModel().getColumn(2);
javax.swing.JComboBox combo = new javax.swing.JComboBox();
int s = postList.size();
for(int i=0; i<s; i++)
combo.addItem(postList.get(i));
col.setCellEditor(new DefaultCellEditor(combo));
//Set up tool tips.
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Click for post office Id list");
col.setCellRenderer(renderer);
//Set up tool tip for the mailName column header.
TableCellRenderer headerRenderer = col.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer)
((DefaultTableCellRenderer)headerRenderer).setToolTipText(
"Click the Post Office Id to see a list of choices");
}

How to delete standard text in SO10

Hi,
We have lot of data in SO10 ,whcih we don't need now.
How can we delete it?

Hi,
Goto SO10 and type the text-id you want to delete and then click on
Change button. After that select the menu Text-->Delete. It will delete
the Text ID
Changing the title of Standard Text:
Goto SO10 and type the text-id you want to delete and then click on
Change button. Select the menu Goto-->Header. The Short Title Field will
have the current title, you can change the text title here.

Problem regarding Selection Text for a Variable declared in ABAP

Hello Experts,
I am new to ABAP development. I have declared a variable in ABAP..Then i went to GOTO>Text Elements> Selection texts.
Then when i am selecting a date to have dictionary ref, then the text part is changed to "Date in Format YYYYMMSS in 8 C", then i can't customised it any more. But i want to display the text as "START DATE"..but while running. it's displaying "DATE" only.... How i can get rid of this situation?
Another problem : the limitations for th text in selection text is upto 33 charcaters by default..How can i change that so that i can accomodate as many characters i want.
Please help...I got stuck here for long time
Thanks
ANUPAM

Hi,
In the selection texts, don't use the check box to use the dictionary reference. So that you can declare your own text here.
If any text symbol is already declared and now if you want to increase the text, by default the maximum length is assigned.
So simply delete and insert the text symbol again. It will work.
For the selection texts, if you want to use more length, then use as below.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS pc_check AS CHECKBOX.
SELECTION-SCREEN COMMENT 4(60) text-020.
SELECTION-SCREEN END OF LINE.
Here the text-020 will come in the selection screen for the above check box.
Regards,
Nangunoori.

Selecting text in a field

Good morning everyone
I'm playing around with a textfield today where I want to have some default text showing by default and when I go into the textfield box, the text would all be selected by default so that the user as an easy time removing it from there.
Right now, I add my values to the object.default ="please choose one". That works ok, now how can I have the text selected when user puts the focus in that textbox? I cant seem to find anything that can do that.
Does anyone have an idea if that's doable or not?
thank you so much again.
Pat_rick

Hi there,
there is an easy way to do this without having to select/deleting the text in the textfield
it is called ghost text, it is simply a display pattern for fields when they equal a null value..
just go in that textfield you are talking about, in the Object properties / Field tab click on the Pattern button..
once in the Pattern dialog box, make sure you are in the display tab,
then under Pattern, just write in the textbox : null{'Please choose one'}
This should do the trick
Hope this help!

Speed up adding URL hyperlinks to bullets/selected text

Hi, I'm doing a presentation that requires linking a huge amount of the bullet text to different sites. I was hoping to create some sort of macro that told Keynote to add the URL of the current active window in Safari to the selected text, but Automator can't do it and I don't know of any other way to create a macro (I'm new to the Mac world).
At the moment, after go to the site I want to link to, switch to Keynote, highlight the desired text and open the Hyperlink inspector window:
1) Hyperlink inspector window defaults to Slide (vs. Webpage)
2) After I click Enable Hyperlink and choose Webpage from the pulldown menu, the URL defaults to my home page URL.
This means I have to go to Safari, highlight and copy the URL, switch back to Keynote, highlight the homepage URL, paste the correct URL (from the active Safari window), click Apple-end to get to the end of the URL and hit Enter in order to hyperlink the selected text.
I know there has to be an easier way.
At one point, I accidentally did something that dynamically changed the URL in Hyperlink inspector to the active URL on Safari, but I can't re-create it. That, at least, would be some help.
Any suggestions for how to simplify/speed up/automate this cumbersome process would be GREATLY APPRECIATED, as I am slogging along using this inefficient approach while trying to meet a looming deadline.
Thanks in advance!
Maggie
iBook G4 Mac OS X (10.4.6)

Maggie, how desperate are you for a quick solution? One approach might be to edit the Keynote XML text file directly, adding the bullets and hyperlinks as elements in that file rather than through Keynote proper. This approach is relatively straightforward, and it is very fast, but it does involve getting down-and-dirty with the XML, which might not be everyone's cup of tea. It's honestly not that daunting, though, and just involved doing very minor editing to a text file within TextEdit. I don't know if it would work well for your specific needs, and it involves a completely different workflow than working in Keynote directly, but it might be worth a shot. Here's how you would add a list of hyperlinked bullets to a single slide:
- First, create a single slide with a bulleted list with a single item that has a hyperlink to a website. This will allow you to see what the XML looks like when we open the XML file. Use an unusual word or string of letters for the bullet item to make it easier to find in the XML code. Save this one slide presentation, and close it.
- In the Finder, hold down the Control key while clicking once on the presentation file. This will bring up the contextual menu. Choose "Show Package Contents". This will open a new Finder window that shows you the "guts" of the Keynote presentation, which is actually a collection of files.
- Double click on the "index.apxl.gz" file. This is the file that holds the XML markup for the presentation. It is stored in compressed form, but when you double-click it, a new file, "index.apxl", will be created. This is a plain text file, editable with TextEdit, and it is the file you will modify. Delete the "index.apxl.gz" file, as it isn't needed now, and Keynote will automagically re-compress the "index.apxl" file when we open the presentation.
- Open the "index.apxl" file in TextEdit (or whatever other text editor you like). You will see a mess of XML, without any real formatting. That's OK though, because you only need to edit a small bit of this file, and you will use the unusual word in the bullets you created as a search guide.
- Find the unusual word in the text. This word is embedded in the XML code that specifies the bullet on the slide. This is the code that you will need to edit.
The code that specifies a hyperlinked bullet will look something like this:
<sf:p sf:style="SFWPParagraphStyle-263" sf:list-level="1"><sf:link href="http://www.apple.com/"><sf:span sf:style="SFWPCharacterStyle-38">Test1</sf:span></sf:link><sf:br/></sf:p>
(The numbers of the "ParagraphStyle" and "CharacterStyle" may be different depending on the theme you used.)
If you look at this snippet, you can see that there is a URL in the <sf:link> tag -- that's the hyperlink for the bullet text. You can also see that there is some text (in this case, "Test1") wedged between the <sf:span> and </sf:span> tags -- that's the text that appears on the slide, and in your file it will be the unusual text that you searched for in the file.
Now, the cool thing is that, if you change this URL and this bullet text in the XML file and save it (having previously deleted the "index.apxl.gz" file), you will have changed the bullet text and hyperlink in the actual presentation. The much cooler thing is that you can add bullets to a slide by simply pasting multiple copies of the above code template into the XML file -- just make sure that you copy the entire bullet template (from <sf:p to </sf:p>), and that you paste it directly after another </sf:p> tag. (Be sure to use the template from your XML file, since the ParagraphStyle and CharacterStyle numbers will be different.)
What this means is that the task that formerly involved going back and forth in the Keynote interface now just involves editing a text file. In the case of your task, for example, what you could do is create a second TextEdit window, paste the bullet code template into it several times, and then just drag and drop the URLs you want into the various address spots of the templates. You can also edit the bullet text directly in the templates. Once you're done, you can simply copy the whole batch of text and paste it into the appropriate spot in the "index.apxl" XML file, and you're done.
Also, because this is now a text editing task rather than a Keynote task, you can potentially take advantage of applications that automate text editing to generate the bullet XML for you. For example, you could just create a list of the URLs, and then use the macro capabilities of Word, or (my favourite) NisusWriter, to go through the list and populate the addresses in the bullet templates. The possibilities are quite wide open with this approach.
This is just how to do one slide, but multiple slides are just as straightforward -- simply start by creating a presention where each slide has one bullet point, with unique text in each bullet. Then you can easily find the section of XML code for the bullet of each slide, and edit accordingly.
This may seem like a hugely involved and roundabout way of doing this task, but it works, and by making it a text editing task, it can make it far easier.
PowerMac G5 Mac OS X (10.4.4)

Need to Update SELECTION TEXT and text symbols for report J_1IEWT_CERT.

Hello Experts,
My requirement is need to "Update SELECTION TEXT and text symbols for report J_1IEWT_CERT".
1. As I want to change text sysmbols for 006 to "Run in preview mode". Currently it showing "Type of output". Issue I am facing here is that whenever I deleting aur changing the same it throws an error : "Text symbol 006 is an original text and cannot b
deleted or renamed". How can I do the same.
2. Secondly I have to add two selection text also i.e. ZFATHER and PREV . And delete two selection text i.e. P_PDF and
P_SCRIPT. In this Tab there is only a Icon of deleting not an Addition button .So How can I add two more selection text.
Above are Manual Activities which is written in note 1486147. We already taken an acess key and it shows in editable mode but
not able to add/deletin/modify selection text and text symbols.
Please provide the solution as it is critical requirement.
Reagrds,
Supriya Bhatt.

Hi Vishal Saxena,
Just go through the screens and do it .
[<li> Link1|http://4.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqL9rnvI/AAAAAAAAEs4/fPG7IG9yGK4/s1600-h/3-716953.JPG]
[<li> Link2|http://1.bp.blogspot.com/_O5f8iAlgdNQ/SjoVp3d9uEI/AAAAAAAAEso/ZxfkeNAiOZQ/s1600-h/1-715669.JPG]
[<li> Link3|http://2.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqIbpNpI/AAAAAAAAEsw/2ntYgX-i1Dc/s1600-h/2-716353.JPG]
Thanks
Venkat.O

Delete selected text

Similar Messages

Maybe you are looking for