Delete some of the leading zeros

Hi All,
Just wondering how I can delete some of the leading zeros, but keep two of them.
My field incoming will be '0000000003'. I want to use DELETE LEADING '0', but I want my output to be '003'.
This field incoming can also contain text instead of a number, so I don't want to mess around with field lengths.
Any suggestions?
Thanks
Charla

Hi Charla,
try to use "Write to".
example:
parameters: num(10) type N.
user digit "20"
num has the value: "0000000020"
write num+7(3) to num.
num has now the value: "020"
write: num.
Regards
Allan Cristian

Similar Messages

About FF_5(RFEBKA00), how to delete the leading zero by using user exit

The program RFEBKA00 can handle input files that don't carrry the leading zeros on the check number field.
But the Table PAYR stores check number with leading zeros
While inbound, the program will don't work well.
How should i enhance the program?
Thanks a lot
Daniel

Hi,
Create a new program that will read the fields..
Then put the leading zeroes in the check number field..
And then modify the file..
You can use the FM CONVERSION_EXIT_ALPHA_INPUT to put leading zeroes..
Thanks,
Naren

About FF_5(RFEBKA00), how to delete the leading zero by using user ex

The program RFEBKA00 can handle input files that don't carrry the leading zeros on the check number field.
But the Table PAYR stores check number with leading zeros
While inbound, the program will don't work well.
How should i enhance the program?
Thanks a lot
Daniel

Hi,
Please do not open duplicate threads for the same question..
Please close this thread..
Thanks,
Naren

Document Templates in MS Word - how to cut the leading zeroes in number

Hello CRM gurus !
We use document templates in MS Word but have the document number printed with the leading zeroes.
example we have now:
0005000681
example we want to have:
5000681
Question - how to do that?
Is that in standard? The document number is the ObjectID tag as far as I know. Do I need to create another tag?
Or may be just call a function? Do I need to change my current Web Service Tool? Is that some extra ABAP to be inserted?
Thank you very much.

Hi,
have you tried to use this function call to delete de leading zeros?:
     CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
         input = value
       IMPORTING
         output = value.
Best regards
Manfred

How can I remove the leading zeros on jpg files?

I'm looking for a way to remove the leading zeros on over 1000 jpg files, without changing the remaining digits in the file name. Is there some automated "batch" script?
i.e going from 003405607.jpg to 3405607.jpg

You could write an AppleScript. but it will be easier to get and use a third-party file renaming utility. I use the freeware NameChanger which works quite well.
https://www.macupdate.com/app/mac/21516/namechanger
Regards.

Losing the leading zero in binary values

Hi all,
I�m currently creating some basic examples of bitwise operations and I�ve just noticed that I�m losing the leadnig zero of a binary value ( e.g.
decimal 1 (expecting to see bin of 0001) is manifesting as 1
decimal 16 (expecting to see bin of 00010000) is manifesting as 10000
below is a full example
import static java.lang.Integer.*;
public class BitExample {
public static void main(String[] args) {
System.out.println(
     toBinaryString(0x1) + '\n' +
     toBinaryString(0x16) + '\n' +
     toBinaryString(0x6a) + '\n' +
     toBinaryString(0x80)
I can see I�m missing something, but not sure what. Can you help?
Many Thanks
Giles

which obviously returns a very different resultNo it does not ... let's translate the example to decimal (with additions instead of bitwise operations, but that doesn't change anything:
1234 +
0001
1235and
1234 +
1
1235both notations are correct, aren't they? Now the second one doesn't look so nice (and usually the 1 should be right-aligned to be easily readable, but it isn't wrong, because of this.
The same is true for binary operations. The problem is, that while learning bitwise operations it's easier to unserstand if you always write the leading zero (as you do in your example).

Need to strip the leading ZERO using ABAP code.

Hi Friends,
I got a situation where i got customer number called 011. I need to write an ABAP in Transformation to strip the leading ZERO , 11 should be posted to the master data attribute. could you help me in the logic pls.
Thanks in advance,

hi friends, i got a prob again, as i mentioned if i got 0 as prefix its deleting but if any 3 digit is comming it's converting in to 2 digit, as i mentioned if the prefix is 0(zero) then only i need to delete the zero.
Is there any other solution for this..
thansk in advance.

Is there a way to remove the leading zero from the 24 hour time display in iOS8?

In the previous versions of iOS, the 24 hour time format for some regions dropped the leading zero from single digit hours: 1:23 for example.
In iOS8, it appears that once 24 hour time format is toggled, the time is always displayed as four numbers: 01:23 for example.
Is there a way to revert to this older format without leading zeroes?

Yes, a colleague of mine was able to figure it out. Just double-click the chapter title in the .aggr project. It places it into edit mode and allows you to remove the ".swf" extension as well as make any other changes to the name that you want. It's so easy now that we know how to do it, but it was tricky to figure out since the chapter list does not appear editable at first.

Want to hide/eliminate the leading Zeros in the Variable popup for0MATERIAL

I have a requirement where 0MATERIAL is having leading zeros and it has the MATN1 conversion routine in the production system.I want to only remove the leading zeros in the Variable popup in report for 0 MATERIAL witohut changing the definition of the object as it has too much production data to change.
Best Regards
Tagore

Hi,
You will have to write some code in F4 help BADI, please refer the sap note 1416952. And you can take help of following function module to remove leading zeros,
CONVERSION_EXIT_ALPHA_OUTPUT.
If above thing doesn't help then you will have to create virtual key figure.
Regards,
Durgesh.

How could I thoroughly close the Leading Zero function of Material No.?

There are only a checkbox in SPRO with the function Leading Zeros of Material No. in
Material Master->Basic Settings->Define Output Format of Material Numbers.
But this function either make the Material ID full of Leading Zeros or delete all the Leading Zeros of it.
Could I make the Material ID as normal string type without those functions?
Because I want to set my Material ID as different between '0001234' or '00001234'.
Could any one help me? Thank you very much.

Hi,
Yes, of course you can, on the screen "Define Output Format of Material Numbers", you can find an indicator "Lexicographical", If this indicator is set, material numbers are stored as follows:
If the material number (numeric or not purely numeric) was assigned externally, it is stored left-justified as entered.
Example
Defined length: 8 characters
Externally assigned number: 123
Stored number: 123
Note
Any leading zeros that may have been entered are stored too. This makes it possible to distinguish between the material numbers 123 and 0123.
If the material number (numeric only) was assigned internally, it is padded with leading zeros to the defined length and stored left-justified.
Example
Defined length: 8 characters
Internally assigned number: 123
Stored number: 00000123
Activate it and make the number is assigned externally, then you can realize your request!
Good luck
Tao

Truncating the leading zero's

Hi experts,
I have an ALV output, in which one of the fields is equipment number (equi-equnr).
There are some leading zero's that I need to truncate from the ALV output.
How can I achieve this? The code is as given below:
fieldcatalog-fieldname   = 'EQUIPMENT_NUMBER'.
fieldcatalog-seltext_m   = 'Equipment Number'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
Thanks,
Ajay.

Hello,
Your requirement is that you need to display the equipment number in the ALV without the leading zeroes.
Ypur code is
fieldcatalog-fieldname = 'EQUIPMENT_NUMBER'.
fieldcatalog-seltext_m = 'Equipment Number'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
Just before append statement add the following
fieldcatalog-no_zero = 'X'.
Now try the same it should solve your problem.
Regards,
Sachin
Edited by: Sachin Dargan on Jan 19, 2010 7:34 AM

Remove the leading Zero from the Query output in SAP BW ?

Hi
Experts,
Vendor Number loaded as (0000010076) from R/3 to SAP BW.
How to remove Prefix of Zero for the Vendor Number(0000010076) from Quey outpt.
Regards.
ASIT

Hi,
Please check out this thread.
Remove leading zeros
Also check if there is any conversion routine used for that particular infoobject.
If ALPHA conversion is selected for your infoobject then it will automatically take away the leading zeros at query level.
Regards,
AL
Edited by: AL1112 on Sep 16, 2011 9:15 AM

How can we put the leading zeros for the extract file.

hello experts..
Iam extracting values from one ztable in this for one filed length will be 2, for this field i need leading zero s at the time of extract... please help me....

Hi,
Declare the field as NUMC data type, automatically you will get the leading zeroes.
Regards,
Subramanian

Not able to delete some of the pages in subpage

Hi,
I am not able to delete some of the subpages in a pagegroup and it gives the following error mentioned below can any one shed some light so that it can be fixed.
the error that surprised me during the page deletion is
Internal error (WWC-00006)
Error while deleting page. (WWC-44130)
Unexpected error - User-Defined Exception (WWC-35000)
Unexpected error - User-Defined Exception (WWC-35000)
Path ID does not exist. (WWC-50001)
this is the same problem with some of the pages is the same page group but a different set of subpages.
My portal version is 10.1.2.0.2 (Build: 150).
it would be very nice of them if any one could give me a solution for this.
Best Regards,
Vijay.

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad. Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos.

Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos. I wanted to see if I could view them from the hard drive. Thanks

Hello, eco1.
Thank you for visiting Apple Support Communities.
This sounds like you are wanting to move your iTunes media folder to an external drive and have iTunes this folder from this location. If this is the case then I would recommend taking a look at the article below.
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Cheers,
Jason H.

Delete some of the leading zeros

Similar Messages

Maybe you are looking for