Delete some user's messages

Hi guys,
Our version of Sun Java Messaging Server is "Sun Java(tm) System Messaging Server 7.0-0.04 64bit (built Jun 20 2008)". Sometimes I have a need to delete some user's messages from the message store. Previously, I have done this with webmail, log in with web admin proxy user and delete some messages, but now in the new version this future doesn't exists.
Does it have some solution as with Sun Java Messaging Server 6?
Regards

Ops, I have configured proxy admin account, but nothing was happened when I try to log in with admin account. In the log I get only this
AM com.sun.uwc.common.auth.LDAPAuthFilter doFilter
INFO: --------Inside ldapfilter-----
My uwcauth.properties configuration is:
defaultdomain = mydomain.com
! Defines the default locale of the application
defaultlocale = en
! Defines the mode in which calendar server is operating.If the calendar server is operatin
g in hosted(virtual) domain mode, this parameter should have value of 'y' else it should ha
ve 'n'
virtualdomain.mode = n
!#### Defines if SSL is enabled #####
uwcauth.ssl.enabled=true
!#### Defines if SSL is enabled for authentication only#####
uwcauth.ssl.authonly=false
!###### Defines list of Admins for Proxy Authenication########
[email protected]
!######## LDAPAuth Filter Configuration ########
! LDAP server to authenticate against
! Usually the ldapauth.ldaphost is the same as the ldapusersession.ldaphost
! but it doesnt have to.
!ldapauth.ldaphost= <LDAPhostName>
!ldapauth.ldapport = <LDAPhostportnumber>
!ldapauth.dcroot = dc=mydomian,dc=com
!ldapauth.basedn= dc=mydomian,dc=com
!ldapauth.domainattr = inetDomainBaseDN,inetDomainStatus,inetDomainSearchFilter,domainUidSe
parator,preferredLanguage,aliasedObjectName
!ldapauth.domainfilter = (|(objectclass=inetDomain)(objectclass=inetDomainAlias))
!ldapauth.ldapbinddn = <binddn>
!ldapauth.ldapbindcred = <binddncredintials>
! ldapauth.enablessl parameter is reserved for future use. Connecting to
! Authentication LDAP directory over SSL is not yet supported.
!ldapauth.enablessl = false
!ldapauth.primaryDomain = sunPreferredDomain
!ldapauth.associatedDomain = associatedDomain
ldapauth.schema=2
!Parameters for the user lookup
!Syntax for the filter: %U is replaced by the uid part of the login (uid@domain)
! %V is replaced by the domain (uid@domain)
ldapusersession.defaultugfilter = uid=%U
!ldapusersession.ugattr = uid,inetUserStatus,preferredLanguage,psRoot,pabURI,cn,mail,mailHo
st
!Host name of the directory server used for users lookup. More than one host can be specfie
d for fallback.
!The names of the servers are delimited by comma.
!The name of fallback servers should be in the format : Host Name:Port#
ldapusersession.ldaphost = host.mydomain.com
ldapusersession.ldapport = 1389
ldapusersession.ldapbinddn = cn=Directory Manager
ldapusersession.ldapbindcred = p/RsDM36193WnsVc8aj5ZQ==
ldapusersession.dcroot = dc=mydomain,dc=com
ldapusersession.basedn = dc=mydomain,dc=com
ldapusersession.domainfilter = (objectClass=sunManagedOrganization)
ldapusersession.primaryDomain = sunPreferredDomain
ldapusersession.associatedDomain = associatedDomain
! Minimum Number of Connections in LDAP Pool
ldapusersession.ldappoolmin =30
! Maximum Number of Connections in LDAP Pool
ldapusersession.ldappoolmax = 100
! Timeout for LDAP request (in seconds)
ldapusersession.ldappooltimeout =30
! ldapusersession.enablessl parameter is reserved for future use. Connecting to
! User/group LDAP directory over SSL is not yet supported.
ldapusersession.enablessl = false
!######## Common Auth Configuration ######################
! Contains the name of the cookie used by the servlet container to
! keep track of sessions. Should never change!!!
uwcauth.sessioncookie = JSESSIONID
!Identity SSO
!'true' if Communications Express is enabled with Identity SSO, else 'false'
uwcauth.identity.enabled=false
! Login Page URL of the Indentity Server
uwcauth.identity.login.url=<IdentityLoginUrl>
! Login Page URL of the Identity Server in SSL mode
uwcauth.identity.ssl.login.url=<IdentitySSLLoginUrl>
!Bind DN of AdmAdmin
uwcauth.identity.binddn=<IdentityAdminDN>
!Bind Credentials of AmAdmin
uwcauth.identity.bindcred=<IdentityAdminPassword>
! Name of the Cookie set by Identity Server
! Note: This should be the same as the one configured in Identity Server
uwcauth.identity.cookiename=iPlanetDirectoryPro
!HTTP Port number of Communications Express
uwcauth.http.port=80
!HTTPS Port number of Communications Express
uwcauth.https.port=443
! Identity SSO Cookie Path
uwcauth.identitysso.cookiepath = /
! if this flag is true then the logout will cleans the IS Session completely so, all the ap
plications participated
! in this IS session will be signed out. If this flag is false then only the uwc's session
will be cleaned and user
! will be taken to the url configured below(identitysso.portalurl)
identitysso.singlesignoff = true
! if IS is enabled and singlesignoff is false then UWC leads to following URL
identitysso.portalurl = http://www.sun.com
! IF identitySSO is enabled then this flag will decide if UWC has to refresh its session wi
th Identity or not.
uwcauth.identity.refreshidentitysession=false
! If uwcauth.identity.refreshIdentitySession is set to true,then this will variable will de
cide at what percentage of
!interval will UWC refresh its Session with IdentityServer.Valid values for this variable r
ange from 1-9.As a example if the
!value of this variable is 8,then UWC will refresh its session with AccessManager after 80%
of UWC session time has completed
! If UWC Session never expires then AccessManager MaxIdleTime will used to calculate the re
fersh time.
uwcauth.identity.sessionrefreshinterval=8
! To support user to login thru the domain specific url (http://virtualdomain.com/uwc) with
out providing
! @virtualdomain.com as part of UID, the domain part of IS login url and domain specific ur
l of UWC should be same.
! To achieve this uwc needs to construct the IS login url in the runtime based on the domai
n specific url otherwise the
! browser will not provide IS cookie to UWC.
! Now, to help UWC to construct the IS login url according to the domain specific url of uw
c, we need to define the
! mapping as follows:
!'true' if pab migration is required else 'false'
!turn on this if pab migration is required
pab_mig_required = false
Our version of UWC is Patch: 122794-21 Packages: SUNWuwc.
What I have misconfigured?
Regards,
Cobe

Similar Messages

  • Can we show some user defined message while cube loading in OBIEE

    Hi All,
    Currently we are building OBIEE dashboards from Essbase ASO Cube as datasource.
    During Essbase Cube loading ,Essbase will "Disable all Administrative Commands".In this mean time,When users are trying to run the dashboards,OBIEE will thorws severe error.
    Can we dispaly some user defined message something like "Cube is loading.Please wait...." or any other alternative.
    Time taken to load the cube is 1hr.Please suggest
    Thanks,
    SatyaB

    Yes, You can better try replacing the whole OBIEE dashboard with a custom message. Whenver the load happens...you shud trigger or set a flag value to 'Y'. Using guided navigation when Flag value is matched to Y...right a JS to replace the whole dashboard.
    [html]
    [head]
    [script type="text/javascript"]var strStatus="@1";
    if(strStatus =='Y')
    location.replace('saw.dll?PortalPages&_scid=in6lPJnWWNk&PortalPath=/shared/Framework/_portal/Cube%20Status%20&Page=Cube%20Status');
    [script]
    [head]
    Replace square bracket with curly brackets in above replace code..
    BTW, you shud mark the previous post on Implicit fact. Follow https://forums.oracle.com/forums/ann.jspa?annID=939

  • Can't delete some users

    Running GW Data Sync 1.2.5.250. We use an LDAP group to add/remove users in our Data Sync server. I removed 15 users from the group and around 6 of the users were deleted from Data Sync, but there are still 9 users that are no longer in the group that are still on the Data Sync server. I have tried adding the users back to the group and removed them from the group but their accounts still remain in Data Sync. I tried manually deleting the user in Data Sync, get confirmation to delete the user, and the user is still on the list of users in Data Sync. I have also used an LDAP browser and checked the members of the group to make sure the users I have deleted from the group in eDir are no longer in the group. Has anyone else experienced this problem? Any suggestions on how to fix?
    Thanks,
    RSarno

    Originally Posted by tdharris
    Hello! I'm one of the two that created dsapp. As general advice steer clear of the delete and remove references option and go with removing regularly from the WebAdmin interface first. Then proceed to use the script to remove user db references only. The reason for this is because the script to delete the user properly has to restart the configengine service in order for things to be properly picked up in the database. Unfortunately I am not the developer, otherwise I'd come up with a much more robust solution.
    So it could be hanging here for one of two reasons:
    1. There was a problem restarting the configengine service. (rcdatasync-configengine restart)
    -- This typically works and the database change we made to set the user to be deleted is picked up. Sometimes it takes a little time for it to realize a user needs to be deleted. This is the nature of not interacting with the application the way it's designed to be interacted with unfortunately. So perhaps configengine never restarts right, or the change isn't realized in the database.
    2. It will also wait until the mobility connector reports the user has been deleted. The delete and remove references option simply waits until it can no longer find the user in a particular Mobility database table, and then proceeds to remove any leftover database references. So it's also possible the user is still in the process of being deleted and it is still waiting or there was a problem removing the user and it's still in the table where it shouldn't be.
    So my advice is to remove the user first from WebAdmin, give ample time for the user to be removed (depends on how much data the user has), perhaps say 5-10 minutes or so will be more than adequate usually. This allows for DataSync/Mobility to remove the user according to it's own protocols. Then proceed to remove just the leftover database references using the dsapp script. The steps to remove just the db references are provided in the following TID:
    TID 7008852 - How to completely remove all references of the user from Mobility
    Hi,
    Thank you for creating the script! I managed to remove the user using this TID: Support | Unable to remove user from DataSync
    Do you have any idea how I could use you script with spaces in the username? The reason for the spaces is that Mobility is linked to our Active Directory and uses the cname instead of the samaccountname. When I logon to the Mobility webadmin, I also have to logon with my full name instead of my non-spaced username.
    Thanks.

  • 8300 SIM card is full! Please delete some SMS Text Messages.

    I have had my BlackBerry Curve since December of 2008. It has recently started acting up, and my main problem is that it claims the SIM card is full.
    Options
    SMS Text Text
    Leve Messages on SIM Card: No
    I haven't any contacts stored on my SIM. What gives?
    Message Edited by afawcett88 on 09-04-2009 01:59 PM

    I finally figured out how to delete SMS text messages from the SIM card.  Open a text that you sent or you received from someone.  Open the menu then "view folder" option.  All of your sent and received text messages will be stored here and can be deleted.

  • What happens when i sync my iphone? does the info on my phone overwrite the info from my previous sync? for example, when i delete some apps and messages on my phine, and i sync it, do these deleted items get restored?

    please help!:)

    See this excellent user tip from Kappy explaining "Other":
    https://discussions.apple.com/docs/DOC-5142
    You probably have one or more corrupt apps.  Make sure you do not simply restore all your apps ... choose which ones you keep.

  • My startup disk is full:  how do I clean it up?  Simply deleting some files does not help.

    I get the message that my startup disk is full. It says to delete some files to make more space; but after deleting some files, this message will reappear again after a while.  What else can be done?

    I hope you haven't removed anything that involves the system.
    I hope you haven't remove things willy nilly, either.
    Here are some general tips to keep your Mac's hard drive trim and slim as possible
    You should never, EVER let a conputer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your Mac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    To find other large files, download an app called Omni Disk Sweeper.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • How to prevent some user to delete mail

    Due to company requirement.
    We need to disable some user ([email protected]) to delete any email, but meanwhile they can been allowed to send and recieve email.
    root@mailstore# imsimta version
    Sun Java(tm) System Messaging Server 7u2-7.02 64bit (built Apr 16 2009)
    libimta.so 7u2-7.02 64bit (built 03:03:02, Apr 16 2009)
    Using /mailstore/data/comms/messaging64/config/imta.cnf (compiled)
    SunOS mailstore 5.10 Generic_137111-06 sun4v sparc SUNW,SPARC-Enterprise-T5220

    Jiagang.Sun wrote:
    We need to disable some user ([email protected]) to delete any email, but meanwhile they can been allowed to send and recieve email.
    Users have full rights to their own mailbox, you cannot disable the "delete" right.
    You could however redirect emails for the user to a shared folder which they subscribe to and only grant specific rights for that user using the readership utility:
    http://wikis.sun.com/display/CommSuite/readership
    Regards,
    Shane.

  • I delete some emails ,there are moved to trash . I delete them from trash folder too and they still appear in a folder called 'all messages". I repeat the same actions and after a while they appear again!what should i do to delete them permanently??

    I delete some emails ,there are moved to trash . I delete them from trash folder too and they still appear in a folder called 'all messages". I repeat the same actions and after a while they appear again!what should i do to delete them permanently??

    If you are using Apple's Mail app 6.5 is the latest version irrespective of what a previous poster says. It does sound though that you are using a gmail account online via a web browser. Please confirm and fill in missing information.

  • I deleted some of my text message histories to get rid of 'other' space (6.33 gb). They were gone from iMessage, but they still showed up in search, so they were still taking up space on my phone. I synced my iPhone (4s) but the messages are still there.

    I deleted some of my text message histories to get rid of 'other' space (6.33 gb). They were gone from iMessage, but they still showed up in search, so they were still taking up space on my phone. I synced my iPhone (4s) with iTunes but the messages are still there. How can I get rid of these texts for good and have more space on my phone? 6.33 gb of other space is way too much, thats almost half of my overall available space (13.5 gb.) I don't want to reset my phone and lose all my other texts/ app progress/ photos. I do have backups, but when I restore from the backup the other space comes back along with everything else. What can I do to get rid of this other space and the 'deleted' text messages? (I'm running iOS 6.1.3 if that helps)

    But once again, I do not want to lose my other texts, app progress, and photos. I could sync the photos but i would still lose the app progress and texts. I would only restore if it was the only option left, but the other space, as already stated, isnt the main concern. The main concern is those 'deleted' texts. If they go, then a good size chunk of the other space goes. I know you CAN delete texts for good. It worked fine before. All i want to know is why its not working for me now, and how to fix it.
    I also know that when you delete texts on your iphone, they get marked for deletion, however they stay on your device (thats why they show up when you search for them.) then when you sync your device with itunes, the texts marked for deletion should disappear. When i synced they didnt disappear. Thats what i need an explanation/solution for. Why the texts marked for deletion didnt get fully deleted after the sync.

  • I'm trying to download a movie, but I keep getting message error that I have no more room and that I must delete some photos or videos in order to download more movies. How do I delete the videos in order to order more?

    I'm trying to purchase and download a movie, but I keep getting message error that I have no space. The error states that I must delete some photos or videos in order to download. I've gone to iPod then edit and deleted some videos, but I'm still getting the message. What is the correct way to delete the videos and should they still be there.

    They wont still be there if you delete them,but if you have those same photos on the main computer.

  • I installed iOS 7 and it deleted some of my contacts, as expected, so I just resaved them all. There's one particular number that will save but in my messages, it shows up as the number instead of the name saved. How do I fix it? And why is it doing that?

    I installed iOS 7 and it deleted some of my contacts, as expected, so I just resaved them all. There's one particular number that will save but in my messages, it shows up as the number instead of the name saved. How do I fix it? And why is it doing that?

    I had this problem too, I fixed it by going to my settings and under general at the bottom there is a reset option, go there. One of the options should be reset network settings, select that one. I’m not sure why it happens but that worked for me; hope you have the same luck!

  • HT201774 How do I delete excess email messages from my iPhone.  There are 300 messages listed, and every time I delete some, more are added from old messages.  How do I limit the number of messages that can appear on my phone?  How can I delete messages i

    How do I delete excess email messages from my iPhone.  There are 300 messages listed, and every time I delete some, more are added from old messages.  How do I limit the number of messages that can appear on my phone?  How can I delete messages in bulk,

    You can't.
    All photos transferred from your computer are stored in the Photo Library. The photos in the album or albums below are not duplicates - they include a pointer to the original photos stored in the Photo Library. This way you can view the photos in a particular album only by selecting the album, or you can view all photos available in all albums by selecting Photo Library.
    Just as with an iTunes playlist. A song cannot be in an iTunes playlist unless the song is in the main iTunes library. Placing a song in a playlist does not duplicate the song. Remove the main iTunes library or the songs from the main iTunes library that are in a playlist and the songs will no longer be in the playlist either. This way you can listen to the songs in the playlist only by selecting the playlist, or all songs in your entire iTunes library by selecting Music under Library in the iTunes source list.
    The same with iPhoto on a Mac. A photo cannot be in an in iPhoto Event or Album unless the photo is in the main iPhoto library. Placing a photo in an Event or Album does not duplicate the photo. This way you can view the photos in an iPhoto Event or Album only by selecting the Event or Album, or all photos in all Events or Albums.

  • I have deleted some messages on my phone my mistake going back a few months can I get copies

    i have deleted some messages on my phone my mistake going back a few months can I get copies

    If you have backed up your iPhone regularly you can Restore your iPhone in iTunes from your backup and retrieve them.

  • PSE 10 Error Message, when I try to delete some photos.  Can delete others normally.

    I recently have not been able to delete some photos.  Didn't make a copy of the actual error message. Will record more info the next time I get the message. Have more than 60,000 photos in my database. any ideas, suggestions at this point ?

    Use File...Catalog to open the Catalog Manager.  Highlight your catalog in the lower section of the dialog and hit the "Repair" button.  Repair the catalog anyway, even if it says there's nothing to repair.  Then repeat, using the "Optimize" button.
    Ken

  • Recently my iPhone 4 has started to delete the content of messages as soon as I open them and also is changing the names of some of my contacts from the name that I give them to their email addresses and all of this is without any input from me help!

    My iPhone 4 has started to delete the content of messages automatically as soon as I open them and is also changing some of my contact names from their names to their email addresses. Help!

    I've had the same problem with the names being changed to email addresses.Did you ever find out how to stop this ?

Maybe you are looking for

  • Problem with ESM on some computers

    We have been having a problem with ESM on some older computers. The computers all seem to be older computers running WinXP SP2 (Dell OptiPlex SX260). The computers have the Novell client, either 4.91 SP4 or SP5, and either have the Microsoft client f

  • How do I open a new browser window from Flash

    I wish to open a new browser window from Flash and when the new window closes to return to the location from whence I started. ThomasChen

  • DB12 - Overview of REDO logfiles - Not yetbackedup - 300 Maximum

    Experts............... In DB12.. Under Redo Log Backups on Overview of redo log files ....it shows maximum ...300..... but actually my "oraarch" directory contains 300+ archives , but it still shows "300" as highest number in DB12... How we can fix a

  • Getting Error IB_CRM_OBJECT 006

    Hello, in some cases we are getthing the following error message: IB_CRM_OBJECT 006  when creating a POD with CRM 7.0. Unfortunately it is not possible to find a possible regularity. It seems that the failure is coming up "casual". First we used Note

  • When I import cds, occasionally track quality is awful.

    On some cds, even newly purchased ones, when I import them onto iTunes some tracks momentarily pause, giving a kind of crackling sound as it happens. Is there something I can do to improve the quality of the importing process? No one else i've spoken