DELETE syntax for RDF triplets

Hi,
In the ORACLE RDF documentation only the syntax for inserting an RDF triplet is specified. It is:
INSERT INTO articles_rdf_data VALUES (2,
sdo_rdf_triple_s ( 'articles', '<http://www.nature.com/nature/Article1>',
'<http://purl.org/dc/elements/1.1/creator>',
'"Jane Smith"'));
What is the syntax for deleting a triplet? Can SQL statements be combined such that a deletion of the results of a previous SELECT be performed. Thanks in advance.
Cheers,
Mircea

Hi,
Alter Table Constraint Add Fk_Dept Foreign key(dept_no) references dept(dept_no) on delete cascade.
Hope this helps
Regards,
Ganesh R

Similar Messages

Syntax for deleting listener config.

Can you delete / recreate a listener ?
I can't seem to find the right syntax for this.
NAME=ora.rac2.LISTENER_RAC2.lsnr
TYPE=application
TARGET=ONLINE
STATE=OFFLINE
------------------------------------------------------------

If you don't want to use netca then shutdown the listener you want to get rid off. Make sure it is offline. Clean-up listener.ora (and maybe tnsnames.ora) manually then issue:
crs_unregister ora.rac2.LISTENER_RAC2.lsnr
Hope this helps.

Using delete and FOR ALL ENTRIES

Hi,
We have a error message regarding the following code :
Delete FROM TABLE FOR ALL ENTRIES IN lt_TABLE WHERE
TABLE_KEY1 = LT_TABLE_KEY1
Could we use the For All entries with "Select" ?
For information, the error message is "Unable to interpret "FOR". Possible causes: Incorrect spelling or comma error.
Thank you.

Hi,
Check the below syntax, if you want to delete from database
DELETE FROM sflight
WHERE carrid = p_carrid AND
fldate = sy-datum AND
seatsocc = 0.
Just a suggestion. May be from next time you can use F1 help for syntax:
1. Place the cursor on the delete keword in your program and press F1 - You willl get all the possible syntax for delete statement
2. Else open the transaction ABAPDOCU, Click Keyword Help, Enter the required keyword(delete in this case) and press cont.. You will get the syntax.
Hope thsi will help you.
Regards,
Swarna Munukoti.

UPDATE command syntax for mulitple checkbox update

Hi,
I intend update the checkboxes by id in bulk.
My table is below. I want to update the selected form_id
checkboxe and their
values accordingly. That, I click the checkboxes (containin
form_id
information) of 1, 3, and 6; and I check their respective
fields for column
check01 and check02.
form_id check01 check02
1 1 0
2 0 1
3 0 0
4 1 1
5 1 1
6 1 0
I am using below code for deleting. I can do insert into. But
I could not
figure out the correct syntax for UPDATE command similar to
below example.
Sample for deleting:
DELETE FROM ADS
WHERE AD_ID IN (varCheckBox)
Thank you
Hakan

Check here for SQL UPDATE syntax..
http://www.w3schools.com/sql/sql_update.asp
Regards,
..Trent Pastrana
www.fourlevel.com
"Hakan834" <[email protected]> wrote in message
news:e9tdd8$ppk$[email protected]..
> Hi,
>
> I intend update the checkboxes by id in bulk.
>
> My table is below. I want to update the selected form_id
checkboxe and
> their values accordingly. That, I click the checkboxes
(containin form_id
> information) of 1, 3, and 6; and I check their
respective fields for
> column check01 and check02.
>
> form_id check01 check02
> 1 1 0
> 2 0 1
> 3 0 0
> 4 1 1
> 5 1 1
> 6 1 0
>
> I am using below code for deleting. I can do insert
into. But I could not
> figure out the correct syntax for UPDATE command similar
to below example.
>
> Sample for deleting:
> DELETE FROM ADS
> WHERE AD_ID IN (varCheckBox)
>
>
> Thank you
>
> Hakan
>

Syntax of RDFS predicates and objects in triples?

Hi,
I am trying to create and load triples into the staging table from a flat file. My triples are like:
<myProject:Observation> rdfs:type rdfs:Class
<myProject:MouseWeight> rdfs:subClassOf <myProject:Observation>
Will Oracle recognize this syntax of RDFS predicates and objects [and hence use them in a right way for inferencing, etc..]? Or should I use URL-based syntax, e.g. <http://www.w3.org/2000/01/rdf-schema#Class> instead of rdfs:Class?
Thanks for your answers,
Dmitry.

1) Here is an updated script for bulk load for 11.2.0.3:
-- Assuming semantic network has been created, user rdfuser has been created, RDF model family has been created
-- load from flat file to staging table
create table stable (
RDF$STC_sub varchar2(4000) not null,
RDF$STC_pred varchar2(4000) not null,
RDF$STC_obj varchar2(4000) not null
host sqlldr userid=rdfuser/rdfuser control=bulkload.ctl data=family.nt direct=true discardmax=0 bad=d0.bad discard=d0.rej log=d0.log errors=1000000
-- MDSYS needs some privileges for doing bulk-load
grant INSERT on family_rdf_data to MDSYS;
grant SELECT on stable to MDSYS;
-- invoke bulk-load from staging table
exec sem_apis.bulk_load_from_staging_table('FAMILY','rdfuser','stable', flags => ' PARSE ');
2) Here is sample RDF data (in file family.nt):
<http://x.org/family/John> <http://x.org/family/fatherOf> <http://x.org/family/Suzie> .
<http://x.org/family/John> <http://x.org/family/fatherOf> <http://x.org/family/Matt> .
<http://x.org/family/Janice> <http://x.org/family/motherOf> <http://x.org/family/Suzie> .
<http://x.org/family/Janice> <http://x.org/family/motherOf> <http://x.org/family/Matt> .
<http://x.org/family/Sammy> <http://x.org/family/fatherOf> <http://x.org/family/Cathy> .
<http://x.org/family/Sammy> <http://x.org/family/fatherOf> <http://x.org/family/Jack> .
<http://x.org/family/Suzie> <http://x.org/family/motherOf> <http://x.org/family/Cathy> .
<http://x.org/family/Suzie> <http://x.org/family/motherOf> <http://x.org/family/Jack> .
<http://x.org/family/Matt> <http://x.org/family/fatherOf> <http://x.org/family/Tom> .
<http://x.org/family/Matt> <http://x.org/family/fatherOf> <http://x.org/family/Cindy> .
<http://x.org/family/Martha> <http://x.org/family/motherOf> <http://x.org/family/Tom> .
<http://x.org/family/Martha> <http://x.org/family/motherOf> <http://x.org/family/Cindy> .
<http://x.org/family/Cathy> <http://x.org/family/sisterOf> <http://x.org/family/Jack> .
<http://x.org/family/Jack> rdf:type <http://x.org/family/Male> .
<http://x.org/family/Tom> rdf:type <http://x.org/family/Male> .
<http://x.org/family/Cindy> rdf:type <http://x.org/family/Female> .
<http://x.org/family/Person> rdf:type rdfs:Class .
<http://x.org/family/Male> rdfs:subClassOf <http://x.org/family/Person> .
<http://x.org/family/Female> rdfs:subClassOf <http://x.org/family/Person> .
<http://x.org/family/siblingOf> rdf:type rdf:Property .
<http://x.org/family/parentOf> rdf:type rdf:Property .
<http://x.org/family/brotherOf> rdfs:subPropertyOf <http://x.org/family/siblingOf> .
<http://x.org/family/sisterOf> rdfs:subPropertyOf <http://x.org/family/siblingOf> .
<http://x.org/family/brotherOf> rdfs:domain <http://x.org/family/Male> .
<http://x.org/family/sisterOf> rdfs:domain <http://x.org/family/Female> .
<http://x.org/family/fatherOf> rdfs:subPropertyOf <http://x.org/family/parentOf> .
<http://x.org/family/motherOf> rdfs:subPropertyOf <http://x.org/family/parentOf> .
<http://x.org/family/fatherOf> rdfs:domain <http://x.org/family/Male> .
<http://x.org/family/motherOf> rdfs:domain <http://x.org/family/Female> .
<http://x.org/family/Cathy> <http://x.org/family/height> "5.8"^^xsd:decimal .
<http://x.org/family/Jack> <http://x.org/family/height> "6"^^xsd:integer .
<http://x.org/family/Tom> <http://x.org/family/height> "05.75"^^xsd:decimal .
<http://x.org/family/Cindy> <http://x.org/family/height> "06.00"^^xsd:decimal .

What is bind syntax for blob datatype for sqlite3

Hi All,
i have written 2 times.
1. sqlite3bind_blob(insertstatement, 1, image, -1, SQLTRANSIT);
it doesn't give compile error but when i run the applilcation it crash the
simulator.
2. sqlite3bind_blob(insertstatement, 1, image, -1);
it gives error like too few arguments.
here image is object of UIImage........
pls anyone can tell me what is proper syntax for binding of blob datatype.
Thankx.
vavdiyaharesh is online now Add to vavdiyaharesh's Reputation Report Post Edit/Delete Message

I wanted to do something similar, but as you mention, there isn't a lot of sample code to copy and paste etc, and I didn't have the time to spend investigating this one issue when plenty of other things needed my attention.
In the end I decided to save my BLOB data as actual files in the document directory and then store a link to these in the database row. Something like primarykey_id_blobname.jpg etc.
Probably not the answer you want, but hopefully it'll get you past a road block and onto the next item on your list.

Syntax for WEP-128 in /etc/network.d/ ?

Hello,
I've succeeded in getting my wireless network controller working in Arch, only I have to enable it manually since I get "could not associate wlan0" on bootup. It's because I hadn't written a configuration file for wlan0 in /etc/network.d so I'm doing that now, *but* I've run into the following confusion:
I've seen the syntax for plain old WEP encryption in /etc/network.d/examples, but is it different for WEP 128 ASCII, which is what I'm using on my network? I ask because the syntax for /etc/rc.conf is different between the two types of encryption, and I've googled it to no avail. I was wondering if anyone here had the answer. Thank you.

I should mention that I also deleted the line
#SPLASH_EFFECTS=$(e=();IFS=',';for w in $splash;do [[ $w == fade* ]]&&e+=($w);done;echo "${e[*]}")
since i don't really need it.
After a rebeoot the error still persists...
What is my fault?

Disable Delete Button for infotype 2001 subtype 0025

I want to Disable Delete Button for infotype 2001 subtype 0025 only in PA30/61.
Is there any EXIT available

Hi
Try it .
Somebody already given this type of answers.
Pls first use Search then post.
Well FYI,
<b>There is a standard User Exit for PA30 / 40 for PBO and PAI events.
ZXPADU01 for PBO and
ZXPADU02 for PAI events.
By writing proper code in here for the IT2001, you can write your rules.
PBAS0001 ( PA: Pers.Admin./Recruitment: Default values and checks ),</b>
Manoj Shakya.

Disable 'Delete' button for posted invoices in GOS Attachment List

Hi,
when i open the attachement list of a generic object i see the attached files. In this dialog i want to disable the "Delete" ( attachment) button for Posted invoices ( In MIR4 tcode -> If the invoice is already posted it should not allow to delete the attachment )
I read oss notes and some ides of copying diverse classes but nothing really helps.
I found two badis
GOS_SRV_REQUEST
GOS_SRV_SELECT
but i dont know where we have to write our code .
I read so many posts related to attachments but all the places described about authoriztion object .
Can you please give some ideas to disable the delete button for posted invoices.

Hello,
For GOS there is no SAP Standard authorization concept. The only way to
manage GOS authorizations is implementing it via custom code as
described in SAP Note: 491271.
Please have a look at the SAP notes:
491271 Authorizations for generic object services
701609 Authorizations for services: Final classes
For the use of S_OC_ROLE: this object states if a user is an office
administrator he can create, modify or delete every document, even
those created by other users. If the user is not an office admin, the
user is still able to create his own attachments.
Regarding to the issue, there is an role object S_GUI for upload.
To match your inquiry, pleaes find the user's role and active the
object S_GUI.
Regards,
David

Syntax for using a variable in an equation.

Hi all,
Simple question here. What is tha appropriate syntax for using a variable in a calculation equation. Specifically, I am taking an established curve fitting equation from my channels and trying to calculate it over a lineargenerated data set to extend the curve beyond the original data sample. Here is the small portion of script I have that will not work. Thanks for any help.
dim a,b,c
a = Data.Root.ChannelGroups(5).Channels("air consumption formula").Properties("ResultApprAnsatzCoef1").Value
b = Data.Root.ChannelGroups(5).Channels("air consumption formula").Properties("ResultApprAnsatzCoef2").Value
c = Data.Root.ChannelGroups(5).Channels("air consumption formula").Properties("ResultApprAnsatzCoef3").Value
Call Calculate("Ch(""[5]/Air Consumption LG"")= ""a"" + Ch(""[5]/LinearGenerated"")*""b""+""c""*ch(""[5]/LinearGenerated"")^2")

Hi Gloorious,
I am using diadem script. In my example above, for the equation, if I substitue a,b,and c with numerical values, the script runs just fine and the formula executes as desired. Is there a way to place the variables there instead as I have tried to do (I was hoping it was just a syntax issue) or do I have to approach it a completely different way?
This script will execute just fine:
Call Calculate("Ch(""[5]/Air Consumption LG"")= 4 + Ch(""[5]/LinearGenerated"")*5+6*ch(""[5]/LinearGenerated"")^2")
but this will not:
dim a,b,c
a = Data.Root.ChannelGroups(5).Channels("air consumption formula").Properties("ResultApprAnsatzCoef1").Value
b = Data.Root.ChannelGroups(5).Channels("air consumption formula").Properties("ResultApprAnsatzCoef2").Value
c = Data.Root.ChannelGroups(5).Channels("air consumption formula").Properties("ResultApprAnsatzCoef3").Value
Call Calculate("Ch(""[5]/Air Consumption LG"")= ""a"" + Ch(""[5]/LinearGenerated"")*""b""+""c""*ch(""[5]/LinearGenerated"")^2")

How do I delete documents from my iPad that were added when it ran regular Acrobat, now that it has switched to DC? The docs are not on the cloud, and DC does not seem to have a delete function for non-cloud docs.

I use an iPad. It automatically switched me from old-fashioned Acrobat to DC. How do I delete docs that were put on my iPad with the old Acrobat? They are not in the cloud, and DC does not seem to have a delete function for them.

Hi,
By default, Acrobat DC for iOS displays recently viewed files. You need to switch to other file location (such as Local, Document Cloud, Creative Cloud) to delete, rename, move, or duplicate files.
You can switch to Local, if you would like to see the files and folders that are locally stored on your iPad.
Would you take a look at the following document to see how you can switch to other file location and delete files?
How to manage files in Acrobat DC for iOS
Please let us know if you have additional questions. Thank you.

How to delete or activate the deletion flag for the sales order line item

Hi All,
I have one Cust order & with referance to that cust order one production order is created . The production order user has done the Goods issue with 261 movement type & GR wi 101 before 4 months back , & he has reverse the GR with 102 on todays date . but in materila master the variable prize is maintain thats why it is showing a differance in the cost .
User want to delete the Production order as well as the custemer order From MDO4 , So we have make the Production order TECO & save , it is gone form the MD04 but the Custumer order still there . It is not allow us to cancell or reject . We have tried to maintain the reason for rejection but it showing the message that you can not activate the deletion flag for the order .
Could you please Help me to find out the way how can i delete the custemer order ?
Thanks In advance
Regards
Piyush

W ehave Settele that order & then activate the deletion flag for the order & then cancel the sales order.

Had to delete iTunes for computer repair. Downloaded new version 10. Would not open -Message: "iTunes Library.itl cannot be read because it was created by a newer version of iTunes"

After getting message below iTunes will not open- just disappears off screen.
Had to delete iTunes for computer repair. Downloaded new version 10. Would not open -Message: "iTunes Library.itl cannot be read because it was created by a newer version of iTunes"

Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2

Syntax for Evaluate function in OBIEE

Hi
I have browsed through the docs but couldn't find syntax for Evaluate function. Could someone pass me the full syntax and if possible a helpful example against essbase.
Thanks

Hi
definitely
syntax:- EVAULATE('your db function(%1,%2)', parameter list)
here %1 and %2 are the no.of parameters (columns or may constant values) to be passed for the db-function
if you have 3 parameters then you need to use %3 also.. means the columns to be passed.
following exapmples are for ORACLE db,
ex1: EVALUATE('upper(%1)', 'kishore kumar') gives the result as -> KISHORE KUMAR
ex2: EVALUATE('upper(%1)', 'Markets.Region') here Markets.Region is column.
you also can call the user-defined functions through evaulate
EVALUATE('functioname(%1,%2), column1, column2)
the above function has 2 parameters to be inputted
Thanks & Regards
Kishore Guggilla
Edited by: Kishore Guggilla on Jan 16, 2009 11:00 PM

SQL Syntax for hour/date range in Query

Hi
I am trying to set up an query for sales order documents procesed in the last 30 minutes to be set as an alert to be run every 30 minutes to the sales manager. I am having difficulty getting the syntax for the last 30 minutes
Any suggestions?
David

hi,
I'm not sure query is correct,but u can modify it futher to get correct one.
SELECT T0.DocNum, T0.DocDate, T0.CardName, T0.DocTotal FROM ORDR T0 WHERE DateDiff(dd, T0.DocDate ,getdate()) = 0 and
DateDiff(Minute,T0.DocTime,' ') <= 30
Jeyakanthan

DELETE syntax for RDF triplets

Similar Messages

Maybe you are looking for