UPDATE command syntax for mulitple checkbox update
Hi,
I intend update the checkboxes by id in bulk.
My table is below. I want to update the selected form_id
checkboxe and their
values accordingly. That, I click the checkboxes (containin
form_id
information) of 1, 3, and 6; and I check their respective
fields for column
check01 and check02.
form_id check01 check02
1 1 0
2 0 1
3 0 0
4 1 1
5 1 1
6 1 0
I am using below code for deleting. I can do insert into. But
I could not
figure out the correct syntax for UPDATE command similar to
below example.
Sample for deleting:
DELETE FROM ADS
WHERE AD_ID IN (varCheckBox)
Thank you
Hakan
Check here for SQL UPDATE syntax..
http://www.w3schools.com/sql/sql_update.asp
Regards,
..Trent Pastrana
www.fourlevel.com
"Hakan834" <[email protected]> wrote in message
news:e9tdd8$ppk$[email protected]..
> Hi,
>
> I intend update the checkboxes by id in bulk.
>
> My table is below. I want to update the selected form_id
checkboxe and
> their values accordingly. That, I click the checkboxes
(containin form_id
> information) of 1, 3, and 6; and I check their
respective fields for
> column check01 and check02.
>
> form_id check01 check02
> 1 1 0
> 2 0 1
> 3 0 0
> 4 1 1
> 5 1 1
> 6 1 0
>
> I am using below code for deleting. I can do insert
into. But I could not
> figure out the correct syntax for UPDATE command similar
to below example.
>
> Sample for deleting:
> DELETE FROM ADS
> WHERE AD_ID IN (varCheckBox)
>
>
> Thank you
>
> Hakan
>
Similar Messages
-
Update trigger syntax for multiple collumn update
Hi
I would like to create an update trigger that updates 3 collumns in another table.
This works for one collumn:
CREATE OR REPLACE TRIGGER DBNAME.Update_EVENT
BEFORE UPDATE
ON DBNAME.DB_EVENTS
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
BEGIN
UPDATE DB_EVENT_LOG ELOG
SET
COMPLETION_EVENT = :NEW.COMPLETION_EVENT
WHERE :OLD.RECORD_ID = ELOG.RECORD_ID ;
EXCEPTION
WHEN OTHERS THEN
-- log the error and re-raise
RAISE;
END ;
but this does not work for multiple collumns:
CREATE OR REPLACE TRIGGER DBNAME.Update_EVENT
BEFORE UPDATE
ON DBNAME.DB_EVENTS
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
BEGIN
UPDATE DB_EVENT_LOG ELOG
SET
(COMPLETION_EVENT
, COMPLETION_DT_TM
, COMPLETED_BY)
=
(:NEW.COMPLETION_EVENT
, :NEW.COMPLETION_DT_TM
, :NEW.COMPLETED_BY)
WHERE :OLD.RECORD_ID = ELOG.RECORD_ID ;
EXCEPTION
WHEN OTHERS THEN
-- log the error and re-raise
RAISE;
END ;
What am i doing wrong?Try selecting from DUAL:
SQL> CREATE TABLE emp_test AS SELECT * FROM emp
Table created.
SQL> CREATE OR REPLACE TRIGGER emp_trg
AFTER UPDATE
ON emp
FOR EACH ROW
BEGIN
UPDATE emp_test
SET (sal, comm) = (SELECT :NEW.sal,
:NEW.comm
FROM DUAL)
WHERE empno = :NEW.empno;
END;
Trigger created.
SQL> UPDATE emp
SET sal = 5000,
comm = 5000
WHERE empno = 7369
1 row updated.
SQL> SELECT empno,
sal,
comm
FROM emp_test
WHERE empno = 7369
EMPNO SAL COMM
7369 5000 5000 -
Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?
D.p.middleton the Adobe Application Manager has been available for quite some time. It not only allows Creative Cloud users to install their applications but also downloads and applies applicable updates. In addition it is also responsible for the licensing and managing your agreement to the terms and conditions of the EULA.
2. this could be due to you selecting a trial subscription to the Creative Cloud? If you go to one of the Adobe Creative products and select Help>Updates it will launch the update portion of the Adobe Application Manager which I believe is the portion you are looking for?
#3 I believe this was already mostly covered in the answer to #2.
#4 the Adobe Application Manager also receives periodic updates which affects both perpetual and Creative Cloud subscription users.
I hope this provides you many of the answers you are looking for? If not please feel free to respond back with any additional inquiries which you have. Also if you are experiencing any difficulties with the update process please post this as well. It may not be necessary to have a full understanding of the inner workings of the Adobe Application Manager to help you resolve your difficulties. -
Error when creating or updating command syntax in an ODI procedure
Hi - I'm new to ODI and trying to create/update a procedure. It doesn't seem like it matters whether the sql statement is correct or not a generic message always seems to be displayed when the command syntax is modified. On a different machine, this is not a problem and procedures can be created or modified. I've compared the setup of the two machines and they appear to be the same. Outside of ODI, I can connecting or executing sql statements without any issues.
Any suggestions?
Oracle version Oracle9i Enterprise Edition Release 9.2.0.2.0 - 64bit Production
Oracle Data Integrator 10.1.3.5.5
JRE version 1.6.0_17
OS version Windows XP
ODI error
java.sql.BatchUpdateException: com.microsoft.sqlserver.jdbc.SQLServerException: sp_cursoropen/sp_cursorprepare: The statement parameter can only be a batch or a stored procedure with a single select, without FOR BROWSE, COMPUTE BY, or variable assignments.
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeBatch(Unknown Source)
at com.sunopsis.sql.SnpsQuery.executeBatch(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpTxt.setString(SnpTxt.java)
at com.sunopsis.dwg.dbobj.SnpTxt.a(SnpTxt.java)
at com.sunopsis.dwg.dbobj.SnpTxt.setStringWithXRefs(SnpTxt.java)
at com.sunopsis.graphical.frame.a.iw.a(iw.java)
at com.sunopsis.graphical.frame.a.iw.g(iw.java)
at com.sunopsis.graphical.frame.a.iw.bH(iw.java)
at com.sunopsis.graphical.frame.bo.r(bo.java)
at com.sunopsis.graphical.frame.bo.bv(bo.java)
at com.sunopsis.graphical.frame.bo.z(bo.java)
at com.sunopsis.graphical.frame.bo.b(bo.java)
at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)Good point - In my case, these are single executable statements. These have been saved in ODI and executed successfully. Just no using my machine.
EXAMPLE 1------------
DECLARE
RetVal ;
I_STRING VARCHAR2(200);
BEGIN
I_STRING := '';
RetVal := XXX.PKG_XXX.SF_COMMA_TO_TABLE ( I_STRING );
COMMIT;
END;
EXAMPLE 2------------
SELECT C.COL1, B.COL2, B.COL3,TO_CHAR(B.EFFDT,'YYYY-MM-DD') COL4,B.COL5,B.COL6
FROM TABLE1 A, TABLE2 B, TABLE3 C
WHERE
and A.ID = 'XXX'
and a.setcntrlvalue = ' '
AND A.NAME = 'XXX'
AND A.EFFDT =
(SELECT MAX(A_ED.EFFDT) FROM TABLE1 A_ED
WHERE A.SETID = A_ED.SETID
AND A_ED.EFFDT <= SYSDATE)
AND B.EFFDT =
(SELECT MAX(B_ED.EFFDT) FROM TABLE2 B_ED
WHERE B.SETID = B_ED.SETID
AND B.ACCOUNT = B_ED.ACCOUNT
AND B_ED.EFFDT <= SYSDATE)
AND A.SETID = B.SETID
AND A.RANGE_FROM = A.RANGE_TO
AND B.ACCOUNT = A.RANGE_FROM
AND A.SETID = C.SETID
AND A.TREE_NAME = C.TREE_NAME
AND A.TREE_NODE_NUM = C.TREE_NODE_NUM
AND C.EFFDT =
(SELECT MAX(C_ED.EFFDT) FROM TABLE3 C_ED
WHERE C.SETID = C_ED.SETID
AND C_ED.EFFDT <= A.EFFDT)
------------------ -
No DDL commands found for activation while updating SPAM/SAINT
Hi,
Hi,
While updating SPAM/SAINT version 0053 (SAPKD70053) we are getting
error in activation.
If we check the logs we found error related to no ddl command found for
activation
No DDL commands found for activation of /SDF/SWCM_PAT03D
No DDL commands found for activation of /SDF/SWCM_PAT03P
No DDL commands found for activation of /SDF/SWCM_PAT03Q
No DDL commands found for activation of CLNT_CVERS
No DDL commands found for activation of CLNT_CVRS2
No DDL commands found for activation of CVERS_SUB
No DDL commands found for activation of PAD03
No DDL commands found for activation of PAT05
No DDL commands found for activation of PAT06
No DDL commands found for activation of PAT09
No DDL commands found for activation of PAT10B
No DDL commands found for activation of PATPRDVRS
No DDL commands found for activation of PATRTVERS
No DDL commands found for activation of PATSWFEATR
No DDL commands found for activation of PATSWFTINC
No DDL commands found for activation of PRDVERS
No DDL commands found for activation of STACKCOMPS
No DDL commands found for activation of SWFEATURE
No DDL commands found for activation of SWFEATUREINC
No DDL commands found for activation of TECHUSAGES
No DDL commands found for activation of TFDIR_INIM
No DDL commands found for activation of TRBAT3
We try to activate the table but were not able to activate it.It giving message that Table cannot be activated.
Attaching the error log files
System Details:
SAP NetWeaver 2004s
Database: DB2 10.5
Can anyone help us in thisHi Amit,
From the logs you attached
2WETP000 13:44:36: Retcode 1024: error in DDL statement for "CLNT_CVRS2 " - repe
2WETP000 at
2EETP345 13:44:48: Retcode 1024: SQL-error "-601-SQL0601N The name of the object to be created is
2EETP345 identical to the existing name "SAP<SID>.CLNT_CVRS2" of type "VIEW". SQLSTATE=42710" in DDL
2EETP345 statement for "CLNT_CVRS2
Can you check in database for the existence of the object.
Also what is your kernel level ?
Regards,
Deepak Kori -
Problem with 'LS' command syntax for generating 'recursive' files list
I'm having trouble getting a recursive (-R) directory listing of the contents of a flash drive --
-- i.e., when I run the 'ls' command with the -R switch (in Terminal), I get either a recursive directory of what appears to be 'all volumes' (i.e., a very large file) or a zero-byte (empty) file.
Terminal also keeps reporting "No such file or directory" but I don't know what it's referring to (it reports it with both the 'zero byte' listing and the 'large file' listing).
Obviously, I'm making some 'syntax error' but I don't know what it is.
Assuming the following . . .
User = MK
Flash drive = NO NAME
. . . what is the correct command syntax to list only the contents of the flash drive (not 'all volumes')?
My last try (it doesn't work) was:
*ls -RTlp /Users/MK/Volumes/NO\ NAME > /Users/MK/Documents/flashdrive.dir*
Thanks.Re: the original post, I should clarify that what I'm looking for is the syntax that will generate the recursive list of the flash drive's files +without first logging the flash drive+ (NO\ NAME) +as the working folder+.
If I do the latter, I can get the recursive listing easily enough.
What I haven't been able to do is generate the listing without first logging NO\ NAME as the working folder.
Thanks. -
Export command syntax for OA page in R12
Hi,
Can any one let me know the syntax for export command for an OA page in R12.
I have tried with the 11i export command, but could not get the page.
Thanks,
DivyaHi,
sorry, wrong forum (its about JDeveloper and ADF) - See: OA Framework
Frank -
10.5.2 update - how long for boot cache update?
At the end of the 10.5.2 updater, I got amessage telling me the Boot Cache needed to be updated, and that everything would run and then restart when finished. When I went back to the MacBook, the screen was dark, yet the white power light on the font was on.
I'm not sure if the Boot Cache cleanup is complete or if I am having problems. How long should it take, and is the screen supposed to turn off/go black during the process?Thanks for the feedback. Since the restart fixed the problem, I recommend downloading the 10.5.2 COMBO update, installing it to ensure that nothing's broken, and after restarting, launch Disk Utility and repair permissions. Once that's finished, launch Software Update and install everything that's missing, except the Time Machine & Airport combined update which precludes reinstalling the COMBO update.
-
How to update the model for a checkbox
Hello,
I have a series of check boxes. The first checkbox when checked, programmatically checks the others.
The bidrectional binding of the UI and the model is done in the controller.
However, when I dumped the model to the console I noticed that the actual visualized states of the checkboxes are not reflected in the console.
I have been searching for a refresh() method or some mechanism to to the update but failed so far.
Any help will be appreciated.Say i have 5 rows then
for(int i=1;i<=5;i++){
String Newpath = updatepath(eval("{{obj.libraryname.web_input_text_fieldname}}"),i)
web.text_area(Newpath).setText("Text to be set")
Below function is used to update my path
public String updatepath(String path,int i) throws exception {
String FPath = "";
if(i<2) {
FPath = path.substring(0, path.indexOf("'", path.lastIndexOf("@id=")+5))+path.substring(path.indexOf("'", path.lastIndexOf("@id=")+5));
} else {
FPath = path.substring(0, path.indexOf("'", path.lastIndexOf("@id=")+5))+(i-1)+path.substring(path.indexOf("'", path.lastIndexOf("@id=")+5));
return Fpath
anyother way to update path and set the fields in mutiple block is appreciable
thanks
Suresh -
Windows/DOS Command line for Apple Software Update
I have a lab of Mac's and PC's all running iTunes/Quicktime. Is there a windows/DOS command line option to running Apple Software Update on Windows? I dont want to have my systems automatically download updates until after I have had a chance to test them first. At the same time though, I down want to have to visit each system(even with VNC) and install the updates by hand either as I have a way to blast a command at the PC's all at once to do the job.
m
MacBook Pro Mac OS X (10.4.10) Windows XP Prook i've sorted it, the solution is you have to put
defaults write /Library/Preferences/com.apple.Softwareupdate CatalogURL http://servername:8088/
and not
defaults write com.apple.Softwareupdate CatalogURL http://servername:8088/ -
I tried to update to the latest software for the iPhone 4 today, May 16th. After removing the software, I received an error message from iTunes and now my phone has no software and useless for everything including a phone call. I immediately went to Restore it to my last saved version and 4 hours later, I still have "iTunes is restoring the software on this iPhone. I am frustrated beyond belief as this happend twice when I had a 3G. Does anyone know how long it should take for a Restore on an iPhone 4 16 gb? Or if there is a fix for this? I'm about to throw away the phone and give up on iPhones forever. Thanks for any help you can give.
Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
XML syntax for MULTI checkboxes
Another XML question :
how do I indicate multi-checkboxes?
Meaning, instead of ticking one box, you can tick several boxes for the same field/attribute?
Example :
*<Field name='WhatKindOfGuy'>*
*<Display class='???????'*
*<Property name='Title' value='What kind of guy is Michael?'*
Let's say I want to present a variety of options : *(a) Cheerful (b) Friendly (c) Openminded (d) Ambitious (e) Dedicated (f) Brash,* etc, etc,etc
Obviously, Michael can be several of these things.
So, I want to have several checkboxes.
What's the correct XML syntax?In your case u have to take that many checkboxes, and finally evaluate the checkboxes selected or not on the basis of their values is true or false
-
10.4.7 update fine - prompted for Pro Apps Update 2006-01 again
I ran the 10.4.7 Update without a hitch. Everything works fine. However, when running SU again to see if 10.4.7 is a multiple update, SU now wants me to install the 2006-01 Pro Apps update again. I'm sure I installed it prior to 10.4.7. This makes me nervous. Any advice anyone?
MacBook ProCan you mount the drive from another computer via FireWire Target Disk Mode? then repair the drive; delete cache folders etc.
From single user mode you could also try to rename
~/Library/Preferences to another name.
MacFixit: Repairing Permissions
General Troubleshooting permissions
Troubleshooting Mac OS X
Insufficient disk space or RAM
Installing Software Update
Advice on Archive & Install -
Looking for an 8752A command LIST. Would like to send individual
commands to instrument and READ results over GPIB. Any web page
with this info?
-GHave you tried doing a simple search on Agilent's web site? If you do, you will find several links. The fourth one is the Programming manual.
-
Hi, i've seen in this forum that many people had problems to "comunicate" with MKS PR4000. But still, I'm not able to take the advantage from discussed problems concerning comunication with mentioned device. Thus, I really appriciate if you can give me any suggestions or help to solve the problem which i present bellow.
I have PR4000B with single-channel which controls one barotron trancducer. I'm trying to comunicate with PR4000B via serial port (RS232). The problem is that i really trying (like trial-and-error), because the manual from MKS for sending the command to PR4000B is very bad understandable for me (and even not only for me, as i could see from forum on NI) as well as the answer from PR400B. I produced the simple program for reading the measured value by barotron (command representing by ASCII character $). If i compare value displayed on the PR4000B with value displayed in my program indicator "Measured value"), they are different. The program and manual are attached.
Please, could somebody give me a suggestion what I'm doing wrong?
Thank you fo your reply in advance.
Stepan
Solved!
Go to Solution.
Attachments:
PR4000B.vi 28 KB
Pr4000.pdf 184 KBThe problem is solved!
Afterwards I wasn´t able to decode the comunication with PR4000B single channel I wrote to MKS technical support. They were very kind and reply to me.
They admit that (as Andreas Meier from MKS wrote to me): "The remote communication with the PR4000-Single Channel and PR4000-Dual Pressure Channel is indeed a bit difficult to attain. When we developed these PRs we were very limited with regards to capacities of ADDA converters and of course memory."
And this is very important message: "To ease things at least a little bit the very first command to the PR should be " %1 ". This will tell the PR to accept ASCII-letters; If you don't send the command the PR will only accept binary signals." This is not stated in manual for PR4000!!
After sending the command " %1 " the communication with PR4000B is really easy! E..g. if you want read a measured value, write command "$" (ASCII) and from "read bufer" string indicator for function VISA read.vi the actual value measured by PR4000B is displayed. Then, it is not difficult task to convert it whatever want, moreover you can easily check if the output from PR4000B is correct.
I'd like to express my thanks to Andreas again and hope that this information will be helpfull for somebody else!
Stepan
Maybe you are looking for
-
Using the Apple Remote with Windows Media Center
Hello guys First of all, I am Swiss, so excuse me for my bad English (grammar and stuff...) So, my problem: I bought the Apple Remote and I think it is very awsome! But since Apple has removed Front Row in Lion, I don't really can use it anymore. So
-
Cannot manually print with Mac OSX 6 and ID CS3
I installed Mac Snow Leopard OSX yesterday, and now I cannot make InDesign CS3 files print manually. When I go to the printer dialog box and set Manual Print, then return to the ID Print Dialog and hit PRINT, I get the autofeed paper printed, not the
-
IPhoto 5.0.4 will not load
I currently have a ibook G4 with Mac OS X version 10.4.11. It came with iPhoto 5.0.4 and up until the past two days I have not experienced any problems. However currently the program will not load. When I open it states it is loading the photos.
-
When hearing sample songs they stop and start again.
When I try to listen to songs I may want to buy, the song starts and stops....why? Never happened till apple replaced my old ipad2 with this new one!
-
PO does not contain selectable item
Dear All, I have created PO(ME21N) and also released(ME29N) but while doing GR(MIGO) the error comes"PO does not contain selectable item". Please explain why error is coming where as i have filled all the mandatory data?? Thanks and Regards, Baiju