Deleting an activity

Hi,
I did an import of an empty development configuration.
Then I create a new Java DC abc/mytest with the wizzard and new activity named TestActivity.
Now there is an open activity with some default created files inside.
After that I revert and delete it (and I did no changes on axisting files, integrate new files or checkin this activity).
For my imagination the activity is now deleted, but....:
If I look in the tab Closed Activities I saw my old actvity in there in closed state.
There is no contend inside excepting some empty paths:
- abc
- abc/mytest
- abc/mytest/newdc
- abc/mytest/newdc/_comp
The DTR also has the same folder structure:
inactive->DCs->example.org->tst->newdc->_comp
Did I do something wrong? Why is the activity and content inside the dtr not completely deleted?
Thanks and best regards
Marco

Thanks for your answer. But I make some additional tests. If you manually create an activity; create and insert some new files in that activity und then revert and delete it nothing happens in the dtr and the deleted activity also does not appear in the Closed Activities tab. As we expected.
It seems that when a wizzard is taken for creating a DC some of the content will automatically be checked in and will not be removed by reverting & deleting this activity.

Similar Messages

  • For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder.  It's as if it's locked.  Any ideas how I can fix it?

    For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder.  It's as if it's locked.  Any ideas how I can fix it?

    Yes it sounds like you have a corrupted preference file.
    The setting you make in individual programs get saved to a Preference file in your Users/Library/Preferences folder.
    All you have to do is drag out the old file to the desktop, reboot and load the program and the preference file gets rebuilt without your preferences which you reset.
    For your case I beleive the preference file is
    com.apple.desktop.plist

  • How to get the user who is deleting the activity

    Hi all,
    I need to capture the user id who is deleting the activity. Help me with a solution to it.
    Thanks,
    Sanjani

    Thanks for the suggestion. It was helpful. But actually i want to capture the popup confirmation 'yes' when i delete an Activity in webui to order_save.
    i need to validate the delete Activity confirmation 'yes'. Basing on it i want to run some code written in order_save badi in method check_before_save.
    Suggest me some solution.
    Regards,
    Sanjani

  • Is it possible to not allow delete of activity depending on conditions ?

    Hi,
    I wonder to know if it is possible to cancel a delete event of activity record when some conditions are satisfied.
    What I want to do is :
    if the field "sub Type of activity" = "RT", then when clicking on delete button, an error message is displayed : You are not allowed to delete this activity. Otherwise, it is possible de delete all my activities.
    Best regards,

    Hi,
    This behavior is not available for delete trigger and object activity. What you can try is to override delete button with js but I don't think it is feasable because of the effort. If you try it be sure you do it for all pages where activities are used and deleteable via button or link.
    Best Regards
    SL

  • How to delete failed activation activity????

    Hi Friends,
    I have 2 activites, lets say first one is ABC and second one is XYZ.
    I have created ABC activity first, and then i tried to activate it. Due to some missing jar, it failed.
    Now i tried to fix that in that process i need to create second activitey XYZ. Now, when i try to activate XYZ, i am seeing ABC activity too for activation being it called as Predecessor.
    Now, when i tried to activate with only option of 'activate with all predecessors', it is failing coz of ABC problem even when i fixed it in the next activity XYZ.
    Could anyone pls let me know how to delete the activity which is already checked-in and failed at activation.
    If i can delete the ABC activity then i can activate the XYZ activity.
    Pls let me know..
    Thanks,
    Raghavendra Pothula

    It is not possible to delete checked-in (closed) activities. Unable to activate coz of pre-failed activity.

  • Lifelog, how to delete single activity

    Hi, how can i delete a single activity like photos that i already taken? 
    I have the last lifelog app version, where one of the new is features is  -Delete single activity-
    I could not find any option to do this.

    I feel your pain.. it don't matter how many times you press that button the activity remains like a plauge!! (unless it's a sleep activity then it just disapears) but this has a little trash bin icon instead of the word delete... possibly just a faulty bit of code from the Devs?? 

  • Delete Multiple activity elements

    Hi,
    We need to delete all activity elements in a project, but their are so many. Is their any way to delete multiple activity elements?
    Thanks!

    Hi,
       You can create BDC using CN22 transaction.
    Regards
    Avisek Bhardwaj

  • How to delete an active change version of a PO?

    Hi all mates,
    question: given a PO number, assuming that the active version is a change one and the previous version has been ordered (I don't know if this is the proper word: I mean "transferred to the backend" (R/3))... is there a simple way, e.g, a FM, to delete the last version of a PO, so that this goes definitely lost and the previous version is restored and set to active?
    As usual, thanks in advance
    Matteo
    EDIT:
    after reading a bit, I'd like to add further details:
    - what I call a "change version" is actually a new version of the purchase order which is in status "HELD";
    - 'transferred to the backend' -> the current version of the purchase order is in status "ORDERED".
    Then, if i click on the "version" tab in SRM, i can see that an order modified after distribution has a previous version (status "ORDERED") and a current version (in status "HELD").
    I'd like to know if there's a way to delete the current active version and restore the previous, ORDERED version. The question arises because I'm creating a report that makes an update of a Purchase order, but to do so the order must be in status 'ORDERED' so if an HELD version is active I should "rollback" to the previous one... or alternatively, I must manage overwriting the HELD version currently active ( I wasted a lot of time but I wasn't able to do it ).
    Edited by: Matteo Montalto on Apr 8, 2009 12:45 PM

    Hi, I have the same problem. Can you tell me the solution that you have find ??

  • DNS The Zone cannot be deleted - the active directory service is not available

    Hello TechNet Members,
    As you can see from the Summery, I got this message when I'm trying to delete DNS Zone.
    It's not matter if the DNS Zone newly created or its an Old One.
    After this message the computer is telling you "The Computer is about to make Restart".
    It's so strange and i really don't know what to check first.
    More Information:
    5 Servers that Replicate together.
    The Operation System is Windows Server 2012R2 for all the entire DC's
    1 Domain In the Forest.
    Thanks,

    Hi Jesper,
     DCdiag /fix and no errors in there everything marked as PASSED.
     I did Demotion for one of the DC to troubleshoot, but with no luck i'm back to the same point i started
     I tried to delete the brand new Zone from the commandline using DNScmd it's still not working and the  computer is reboot himslef.
    I've checked the permissions from the ADSIEdit.msc:
    Inherit from MicrosoftDNS section to the ROOT
    DNSAdmins > Full Control
    Domain Admins > Full Control
    From "DNS Server" section at the EventViewer
    The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
    data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
    Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
    "The DNS server was unable to complete directory service enumeration of zone TestZone1.  This DNS server is configured to use information obtained from Active Directory for this zone and is unable to load the zone without it.  Check that the Active
    Directory is functioning properly and repeat enumeration of the zone. The extended error debug information (which may be empty) is "". The event data contains the error. "
    The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
    Thanks,

  • Deletion flag activation

    Dear All,
    i want to set deletion flag for a release process order but it gives error order balance should be zero. how can i set it

    Hi,
    Please TECO the order.Then settle the order and then try putting deletion flag on the same.
    As the there is  balance in the order the system is not allowing the order to be flagged for deletion.This can happen if any onsumption, activity or GR has happened with resopective to the order.
    Hope this can help.
    Regards,
    kaushik

  • How to delete a activity type from KP26 which has executed KSS2 and KSII?

    Hi experts,
    I maintain three activity type to one cost center by KP26
    cost center 1:
       activity type 1
       activity type 2
       activity type 3
    last month I run KSS2 to split the price and also run KSII, so these three activity already have actual cost.
    This month I find activity type 3 should not be assigned to cost center 1, so I want to delete it from KP26 , but the system didn't let me to delete it , how to resolve this problem??
    error message:
    Costs already posted under cost element 6100016. No deletion possible   Message no. K8098
    Under cost element 6100016 there is a splitting record. No deletion p          Message no. K8082
    Plan values exist in other periods. No deletion possible.                                  Message no. K8085
    Actual price for P111CN33/PMT001 already entered; Deletion not possib    Message no. K8184
    thanks very much
    lance

    Hi,
    Please check the long text of these messages, it explains clearly. There are plan/actual dependent data existing for related cost elements, before deleting the records for cost center/activity type, all the dependent data must be deleted first.
    1. Run RKACSHOW to check on those entries!! Please first ensure   COKA entries deleted. You may delete the COKA entries by
       executing the program RKPLNC18.
    2. Subsequently, CSSL entries for cost centre and activity type,   use RKPLNC29 and then the actual CSSL entries with RKPLNC13.
    3. You may use RKPLNC39 to delete a COKP records once the   no corresponding COKA exists.
    4. COSS, COKS, COKP and COKL records could be deleted via KP06.
    Please notice, that even if you reverse all postings for the relevant object, the records in the CO tables still exist even
    if the balance value is 0.
    These records prevent the deletion.
    regards
    Waman

  • Program title in SE38 got deleted while activation

    Hi,
    I am facing a strange issue. I have maintained program title in the attributes section of the executable report in SE38. This title some times got deleted by itself while activation. This happens only some times not all the time I activated the program.
    Please let me know the reason and solution for it.
    Thanks in advance.
    SHoban

    Hi Shoban,
    I believe you may have the symptom described in the following SAP Note/Link;
    https://service.sap.com/sap/support/notes/1412197
    I hope this helps you!
    Best of luck,
    Derrick Hurley
    ABAP Development Workbench
    SAP

  • Cost Estimate Mistakenly deleted - ML Active

    Dear all,
    One of the user mistakenly delete the cost estimate released for a material.
    This material already have the status "quantity and values entered" in Material ledger/
    The Material ledger is active with price determination 3.
    What things usually must be done in this case?
    Please guide us on the issue above.
    Thank you very much for your help.

    Hi Erwin,
    If there is no released cost estimate for the FG/SFG products, you will have a problem during the Billing Doc release to Accounting/COPA document.
    The workaround is : if you are using Split Valuation/Valuation type, you can create new valuation type and release standard cost estimate.
    Let me know if you need any further details.
    BR,
    ADI

  • Change pointer for functional location- deletion flag & activation status

    Hello,
    Im trying to use change pointer for functional location outbound interface. I did all required settings in BD52. The problem is with deletion flag and acive/deactive status.
    I found that those two are stored in:
    table     field
    TAPL     LOEKZ
    TAPL     PARKZ
    The problem I have is that I cannot find the object for those table, and due to that it cannot be customized in BD52.
    Could You please advise which object class should I use or alternatively which other table/field and object should I type in to activate change poiters for deletion flag and active/ not active status?
    For object IFLO, and its table (IFLOT, IFLOTX, ILOA)- there is no field for del flag and active status.
    Thanks in advance.

    Hi, standard didnt let us fulfilling this requirement. What we did- we extended table IFLOT with additional field for the status and used an user exit when saving FL, to take the value (status) from table JEST/TJ02T and copy the value to the newly created field. Then BD52, iflo, iflot, and the new field and it worked. Of course the function module for the message type (BD60) had to be changed to add this status value in additional segment/field for the idoc. Hope this will help You, as there is a lot of technical background behind it, and this is only functional overview.
    rgds.

  • How to permanent delete Network,Activity,WBS through BAPI ?

    Hi,
    I am using BAPI_PROJECT_MAINTAIN for creating Network,WBS and Activities. I am successfully able to create the above things.
    However when I delete using the above BAPI, they are not deleted physically from UI. They remain visible on SAP GUI with delete flag set.
    Is there any BAPI available through which I can delete them physically, so that deleted items should not be visible on SAP GUI.
    Regards,
    Vikas Khandpur

    Transaction SARA is how to delete data for operative Networks/activities and WBS elements  the Archive object is PS_PROJECT on the standard side the archive object is PS_PLAN however it is not just as simple as knowing this the process is a little more involved and the objects need to be configured correctly.
    Dave

Maybe you are looking for