Deleting DTP based on Open Hub and Remote Cube

Hi All,
i have created a DTP delta for my Open Hub to load a flat file from a remote cube.
i have done some load test request but it doesn't work (no data in my file .csv), i have created another full DTP with others parameters and it works successfully.
now i want to delete my Delta DTP but the system return me a message like this:
DTP_4IDT4BXV29E1N0MWINKCWO60B cannot be deleted at the moment (see long text)
and in the long text i have:
Message no. RSBK037
Diagnosis
You want to delete a delta DTP that has been successfully used to load requests from the source into the target. If you delete the DTP, you will also delete the information on the source data that was successfully transferred. As a result the source data would be transferred again, if you create a new delta DTP that links the same source with the same target.
System Response
The system terminated the delete operation.
Procedure
You have two options:
1. Delete all the requests loaded with this DTP from the target and then delete the DTP.
2. Do not delete the DTP and continue to load deltas using this DTP.
i tried to see the requests loaded with the delta dtp and i have deleted one but there are another requests that i can't deleted.
i have deleted the delta dtp from my transport request.
how should i do to delete definitivily my delta dtp?
thanks for your help
Bilal

Do not delete entries out of table RSBKREQUEST.
To delete your DTP, you may use program RSBKDTPDELETE. Give the technical id of the DTP as the input parameter.

Similar Messages

Open Hub For BPC Cubes

Hi Gurus,
I have an issue about the open hubs for BPC cubes. I have a need to take my transactional data from my BPC cube to a table.So I want to create an open hub on my BPC planning cube.
But when i create the open hub on BPC cube, it doesn't read the package. So, data cannot be read. But the open hubs work on my BW cubes.
Is there anything i should do different for BPC cubes ? How can i make the open hub work?
Thanks in advance..
Fatih

Hi Fatih,
Glad you got this working, but a word of warning: As far as I am aware, customer SAP BW development linked to objects in the BPC namespace is not supported. It may very well work, but BPC may also delete and recreate BW objects at any time and without warning, which can leave you in a situation in your production environment that is very difficult to recover from without manual modification of the production BW environment.
The recommended way to export data from BPC NW into a flat table is to use the BPC data manager Export package. You may want to try this option and see if you can meet your requirements this way.
Ethan

How can i delete all history, except open windows and tabs?

hi, i can not find any way to delete all my firefox history, except open windows and tabs.
i could not find any solution about in the web. i did try almost all settings in privacy settings, nothing works. any ideas how to do that, or maybe suggestions for add ons?

Hello,
Have you looked in:
* History (or [[Image: New Fx Menu]] > History) > Clear Recent History...
You can choose what you want cleared and the time frame.

Open Hub and Info Spoke

Hi all,
We have a bunch of Info Spokes created in our production and we want to delete them based on last used date.
Can anyone tell me in which table in BW are the Info Spokes stored
Also like aggregates where we can find out last used is there any tables where we can see when was the Info Spoke last used. I know we can check this at Monitor but when we are talking about hundreds of Info Spokes it can be very tedious to check from monitor
would really appreciate your answers
Surya

Hy surya,
so far I know, the useability will not be recorded in the database. Eventually you may find some info in the InfoCube for technical content, but your question gives me the feeling, that you have a modelling problem, because normally if you have your infoSpokes in process chains you better track the useability. Further, When having so much InfoSpokes as you told, could be that most queries are similar?
Anyway, if you use a file as target, you can see the last creation date. I hope you can follow the relation between InfoSpoke and the target.
Cheers
Paul

Open Hub and Reporting

In Open Hub we send the data from Data Target to the Excel Sheet and in reporting also we generate the report in excel sheet.what is the difference between the two.
Regards,
Chandu.

Hi Eswar,
Welcome to SDN !!!
It is the open hub service that enables you to distribute data from an SAP BW system into external data marts, analytical applications, and other applications. With this, you can ensure controlled distribution using several systems. The central object for the export of data is the InfoSpoke, whereas, when you execute report you get the output in Excel but you cannot make any changes to the data but it can be used to analyze.
Hope it helps...
Best Regards,
DMK
*Assign points if it helps...

Open Hub and Informatica

Hello All,
We are facing a situation, we need to extract data from SAP BW and load it in informatica,
We have created a openhub.
The data in the targets are large , we are able to load the data into open hub quickly ( 6million records in 15mins), but when the data is transferred in to informatica the time taken is huge ( 30-45 rows/sec) when we ran a trace we couldn't find any reason why the data is extractin so slow.
Request you to please let me know what all checks can I do to find the bottleneck and what kind performace improvement I should think of doing.
Regards,
Ravi

Hi Kumar,
Informatica has a connector for SAP BW, integrating as a 3rd Party RFC destination via open Hub.
In the process chain to load the open hub you also need to include a custom ABAP program (distributed via the Informatica DVDs), which is mainly of event logging and informing the listener service on the Powercenter side when the load to the open hub destination table is finished.
We will be using the same method, although we're just in blueprinting at the moment and haven't doe a POC yet. I've got a document, contact me for more info.
Regards
Steffen

Open Hub and Infospoke

Hi,
Is there any difference between OpenHub and Info spoke.
thnx

Hi,
Checkout the below links
infospoke and open hub
What is Infospoke & Open hub service
Regards
Sajeed

Open hub and Infospokes

Hi ,
can anyone explain me the selection parameters of infospoke in production system .
is there any FM developed by SAP ??
please let me know how can i proceed
Maid

Hi
You can do that in ABAP code but i am not sure if there is any FM related to it
Step1
Create a TVARV variable similar to the selection parameter of your Info Spoke.
Step2
Code an ABAP program so as to pick the value of the TVARV variable and change the values of the parameter in the table RSBSPOKESELSET. This is the table which stores the selection set based on which you want to restrict your results.
Step3
Once you execute the program, the selection parameters would be changed.
Step4
Now, you execute your Info Spoke. It would have the new selections maintained by you in the TVARV variable.
Try this and do let me know
Santosh

Open Orders and COPA Cube

Hi,
I have a specific requirement, where we want to add open orders from sales to the existing COPA cube and also we want Existing Open order/sales pipeline reports in SAP to be moved into BI.
Can any one help me on how to go about this and what should be the best apporoach to achieve this task.
Any help technically and functionally will be very helpful
Regards
Vishwanath

Hi Viswanath,
You can evaluate Open orders using datasources 2LIS_11_V_ITM and 2LIS_11_V_SCL.
We extract COPA data by creating a datasource using trasaction KEB0. This datasource would be based on tables CE1**** to CE4****, where **** is the name of the operating concern. These tables get generated when the functional consultants create the operating concern in ECC. What data flows into these tables is controlled by the rules set by the functional folks. Unless the data that you need exists in these tables, you cannot get it otherwise using the datasource. You would need to check in the tables whether the data needed exists there.

Unable to delete a request from a Cube which is loaded by Open hub to flat

Hi,
We have one Cube from which we are transferring data to a flat file by open hub.
the DTP for the OPEN HUB is delta DTP.
Now when i am trying to delete a request from Cube its not allowing me.
Its giving error as request is already updated to the target so delete the request from target first.
I tried deleting the open hub request entry from RSBKREQUEST table.
but still its not deleting the request from the Cube.
Can you please help me in solving this problem.
Thanks in Advance,

I think request is having datamart, which is not allowing it to delete.
You can try to reset (delete) the datamart by clicking on it in cube request and then try to delete.
Or if it does not work, you can delete it from RSICCONT table, which will delete the request from cube also.

Save a csv file on local host, executing a DTP Open hub in a Process chain?

Hi All,
my client has asked me to try if there is a way to save in the local host c:\ a .CSV file generated from an Open HUB executed by a DTP in a Process chain.
when i execute my DTP it work correctly and it save the .csv file on my c:\ directory.
my client doesn't want to give th users authtorization on RSA1 and want to try if there is a way to put the DTP in a process chain
and when executing the process chain every user can have the file on his own local c:\ directory.
i tried this solution but it doesn't work i get an error on executin the process chain:
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Except.                     CX_SY_REF_IS_INITIAL
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "FILE_DELETE" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "CL_GUI_FRONTEND_SERVICES=>HANDLE").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
can you give some advices please?
Thanks for All
Bilal

Hi Bilal,
Unfortunately, DTPs belonging to Open Hubs wich are targeted to a local workstation file, can't be executed through a process chain.
The only way of including such DTP in a process chain is changing the Open Hub so that it writes the output file in the application server. Then, you can retrieve the file -through FTP or any other means- from the application server to the local workstation.
Hope this helps.
King regards,
Maximiliano

Reg. InfoSpokes and Open Hub

Hi
What is Open Hub and Info Spoke.
And also the difference.
regards
Sridhar
[email protected]

Hi
u can use the DTP and transformations to load this data to Openhubservice from BI system
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

Open hub Table deletions

Hi all,
I am using an open hub and out put as DB . for delta load form DSO in open hub level i selected technical key so it will maintain the entire history of delta changes but for performance reason i should delete the DB after some time .
note:
I don't want to select the option deletion data from the table
Thanks and regards
uday

HI,
Deleteing Data in Tables depends on your requirements, generally there are options i.e. Append or Overwrite data, or Delete.
For reference keep data in Tables after some time/days/weeks you can delete the data in tables using some ABAP code. So you write simple code to delete the data in that Table and execute that program whenever you want to delete the Data in Tables.
For, some references see in below url in Open Hub Destination section
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Thanks
Reddy

Difference between INFOSPOKE and OPEN HUB DESTINATION

HAI,
i want the difference between INFOSPOKE and OPEN HUB DESTINATION in detailed....
thank you
@jay

Hi
See this
Re: Open Hub and Infospoke
Bye
N Ganesh

I am getting an dump while executing open hub destination?

I did happened to delete a filed in the open hub and then activated and re-ran it i am getting the following error!!
error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
open hub is active, dtp is active and transformations is active too but still the same!!
Can anyone advise me on this!!
thanks
pooja

Hi,
See in
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Open Hub Destination
Open Hub Destination: Part 1
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
Open Hub Destination: Part 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
Analysis Process Designer (APD)
Analysis Process Designer (APD): Part - 1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f06353dd-1fe3-2c10-7197-dd1a2ed3893e?quicklink=index&overridelayout=true
Analysis Process Designer (APD): Part - 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/analysis%20process%20designer%20(APD)%20Part%20-%202.pdf
Analysis Process Designer (APD): Part - 3
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/analysis%20process%20designer%20(APD)%3a%20Part%20-%203.pdf
Thanks
Reddy

Deleting DTP based on Open Hub and Remote Cube

Similar Messages

Maybe you are looking for