Deleting from Dynamic Internal table

Hi,
How can we delete data from dynamic internal table...
I have a dynamic internal table <fs_dyn_table> which is of type any and can have any fields...
I want to delete all those records which have a value of '10' in a field named field1
I have written my delete statement in the following manner..
DELETE <fs_dyn_table> WHERE field1 = '10'.....but it is not working...it gives me an error...stating that the line type of table must be statically defined.

Hi,
Loop on the internal table into a field-symbol of line type same as the internal table.
Use assign component statement and then delete the corresponding record.
Regards,
Ankur Parab

Similar Messages

How to delete data from dynamic internal table

Hi,
I have dynamic internal table and I have some slection screen fields , using these selection screen fields
(select -options), I have to filter the data? assigning will work with READ , but I have select options not the parametre,
and also delete will not work for dynamic table..
as we cannot use assigning with delete..
So how to do this?
and one more thing is , I cannot filter the data while selection( in select, I cannot filter the data-> as it's not coming directly from table, it's coming from buffer),
so now after selection of data, I need to filter the data from dynamic table.
Is there any way to do this?
Regards,
Mrunal

Hi matt,
I tried with below code as you said. But I am getting dump. can you help?
here is my piece of code.
FIELD-SYMBOLS: <LS_DATA> type any,
                           <LT_DATA> TYPE table,
                            <L_FIELD> type any.
    ASSIGN <l_buffer_entry>-dataptr->* TO <LS_DATA>.
    ASSIGN <l_buffer_entry>-dataptr->* TO <LT_DATA>.
LOOP AT <LT_DATA> ASSIGNING <LS_DATA>.
ASSIGN COMPONENT 'BUKRS' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BUKRS.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ASSIGN COMPONENT 'BELNR' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BELNR.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ENDLOOP.
and here is the description of my dump:->>>
You attempted to access an unassigned field symbol
(data segment 32772).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.

How to delete records from dynamic internal table.

Hi Experts,
Need urgent help!!!
Issue is with Dynamic internal tables.
Below is code written by me :
FORM select_query USING Lw_tabnam
                  TYPE t682i-kotabnr.
DATA : lw_line TYPE REF TO data,
          lw_line1 TYPE REF TO data.
    CREATE DATA Lw_line    TYPE (lw_TABNAM).
    ASSIGN      Lw_line->* TO   <WA_tbl>.
    CREATE DATA LW_LINE    TYPE STANDARD TABLE OF (Lw_tabnam)
                           WITH NON-UNIQUE DEFAULT KEY.
    ASSIGN      Lw_line->* TO <TBL>.
    SELECT * FROM (Lw_tabnam)
             INTO CORRESPONDING FIELDS OF TABLE <TBL>
             WHERE (t_keys).
Endform.
code is working fine.
here even the table name and where condition are dynamic,everything is fine upto this point.
Now i have to delete some record from <TBL> based on some conditons.
     for ex : ( here lc_fieldname is KUNNR)
      loop at t_kunnr.
          lw_tabix = sy-tabix.
        Read table <tbl>
                with key (lc_fieldname) = t_kunnr-kunnr ASSIGNING <wa_tbl>.
        If sy-subrc = 0.
        *Delete
        delete <tbl> from <wa_tbl>
delete <tbl> index lw_tabix.
        Endif.
     Endloop.
The above delete statement doesn't work ,even we can't use index as it gives a syntax error " something related to "index is not allowed in standard table or hash table.
Can you help me ab't how to delete records in Dynamic internal table?
Other option that i am thinking of is to create a static table of type dynamic table.
means, data itab type standard table of <tbl> .I know the syntax is wrong ,however is there any way to do this?
Thanks in advance ,
If you have any suggestion ab't this then do let me know.
bye,
Gaurav.

Hi
I wrote this code and it works fine:
DATA LW_TABNAM(10) VALUE 'LFA1'.
DATA : LW_LINES TYPE REF TO DATA,
       LW_LINE TYPE REF TO DATA.
FIELD-SYMBOLS: <TABLE> TYPE TABLE,
               <WA>    TYPE ANY.
CREATE DATA LW_LINES TYPE TABLE OF (LW_TABNAM)
WITH NON-UNIQUE DEFAULT KEY.
ASSIGN LW_LINES->* TO <TABLE>.
CREATE DATA LW_LINE TYPE (LW_TABNAM).
ASSIGN LW_LINE->* TO <WA>.
DO 10 TIMES.
APPEND INITIAL LINE TO <TABLE>.
ENDDO.
SY-TABIX = 4.
DELETE <TABLE> INDEX SY-TABIX.
WRITE SY-SUBRC.
I hope it help you
Max

Distinct values from dynamic internal tabls

Hi All,
I have a dynamic internal tables like <dy_table> , i want to get distinct values from this internal tables,
how to do that, structure of dynamic internal tables is dynamic acc. to user conditions.
regards,
Anuj

Hi Anuj
Just try this,
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = tb_fields_for_it
IMPORTING
ep_table = gp_dyn_table.
ASSIGN gp_dyn_table->* TO <gt_table>.
ASSIGN LOCAL COPY OF INITIAL LINE OF <gt_table> TO <fs_table>.
LOOP AT tb_output.
*To assign value for serial number.
ASSIGN COMPONENT 1 OF STRUCTURE <fs_table> TO <ls_field>.
<ls_field> = tb_output-sno.
UNASSIGN <ls_field>.
*To assign value for Sales Organization.
ASSIGN COMPONENT 2 OF STRUCTURE <fs_table> TO <ls_field>.
<ls_field> = tb_output-vkorg.
UNASSIGN <ls_field>.
*To assign Rate for its respective Condition type.
LOOP AT tb_konp WHERE knumh = tb_output-knumh.
READ TABLE tb_fieldcat1 WITH KEY fieldname = tb_output-kschl.
IF sy-subrc EQ 0.
lv_count = tb_fieldcat1-col_pos.
ASSIGN COMPONENT lv_count OF STRUCTURE <fs_table> TO <ls_field>.
IF tb_konp-konwa EQ '%'.
tb_konp-kbetr = tb_konp-kbetr / co_10.
<ls_field> = tb_konp-kbetr.
ELSE.
<ls_field> = tb_konp-kbetr.
ENDIF.
ENDIF.
ENDLOOP.
lv_count = lv_count + 1.
APPEND <fs_table> TO <gt_table>.
CLEAR <fs_table>.
ENDLOOP.
Hope this proves helpful to you.

Populate data from dynamic internal table

Hi
I have dynamic internal table <lt_paxxxx>. Iam fillling <lt_paxxxx> in the following way.
select * into table <lt_paxxxx> from (infty-dbname).
I have to pass data of <lt_paxxxx> to another internal table lt_final.
'lt_final' should contain fields like <lt_paxxxx>, infty name, DB name.
Could you please help me out how to pass <lt_paxxxx> data to 'LT_FINAL'.

loop at <it_table>
       into <is_table>.
    loop at it_fieldcatalog
         into is_fieldcatalog.
      assign component is_fieldcatalog-fieldname
             of structure <is_table>
             to <field1>.
      concatenate 'IT_TABLE-'
                          is_fieldcatalog-fieldname
                         into w_field.
     assign (w_field) to <field2>.
     check sy-subrc eq space.
      move <field1> to <field2>.
    endloop.
   append it_table
endloop.
regards

SET_TABLE_FOR_DISPLAY - Edited value from dynamic internal table need to be captured

Hi all,
I have created 2 tabstrip screns which contain ALV GRID DISPLAY in a container with dynamic internal table and editable columns .I want to capture the edited value from this ALV GRID display.I have used SET_TABLE_FOR_DISPLAY and for this dynamc internal table is passed which is Field symbol and editable columns have to be captured for further updation into another ztable.
When i used check_changed_data i am getting dump as field symbol not assigned.
Below is the code : How can i get edited column value from below code
call method alv_list->set_table_for_first_display
    exporting
            is_layout                     = gs_layout
    changing
      it_outtab                     = <fs_dynamic_table>
      it_fieldcatalog               = it_fieldcat[]
    exceptions
      invalid_parameter_combination = 1
      program_error                 = 2
      too_many_lines                = 3
      others                        = 4.
if sy-subrc <> 0.
* Implement suitable error handling here
endif.
Kindly help me to solve this.
With Thanks,
Dina.

please provide more info about the dump to try to help you
as max said, it could be because the field symbol is not global and if its global maybe you are not refering well to the column
i assume that you are using "ASSIGN COMPONENT comp OF STRUCTURE struc TO <fs>" to capture the value changed
validate always the sy-subrc after the assignment.
but the check changed data have parameters that have the old and new values
please provide more info...
Regards

Populate Final internal table from Dynamic internal table

Hello,
I have ti display data in ALV grid whose structure is fixed. I am dynamically selecting data iin an internal table.
Now from this dynamic internal table, i need to populate my final internal table whose structurte is fixed.
Please help.
Rgds,
Himanshu

Hello Himanshu,
When you say dynamic internal table there are two things one is the actual structure and other one is field table that holds information for all the fields used to create dynamic internal table.
No if you want to move data from dynamic table to fixed internal table then you can try as follows:
1.
field-symbols <field_name> TYPE C.
field-symbols <field_value> TYPE C.
Now you either use
LOOP AT fields_itab.
ASSIGN fields_itab-fieldname to <field_name>.
ASSIGN COMPONENT <field_name> OF STRUCTURE <structure_name> TO <field_value>
Now you move value from <field_value> to required field in fixed internal table.
i.e.
itab-fieldname = <field_value>.
Other way to do this:
If you fields order is constant then you can also use index in assign component statement.
do <no_of_fields> times.
ASSIGN COMPONENT sy-index OF STRUCTURE <structure_name> TO <field_value>.
rest is same as first method.
Hope this help!
I have given sudo code and you need to work on it little.
Thanks,
Augustin.

How to pass data from dynamic internal table to standard internal table

hi experts,
below is the piece of code which i have used in my requirement but the data is not moved.
LOOP AT <tab> ASSIGNING <tab1>.
MOVE-CORRESPONDING <tab1> TO wa.
append wa TO gt_outtab.
ENDLOOP.
here
<tab> - dynamic internal table.
<tab1>-dynamic internal table work area.
gt_outtab - standard internal table.
wa- standard internal table work area.
i am not getting what additional thing i have to write.
pls help me in this regard.
thankx in advance.
soham.p.

Hello soham p ,
I am also using the same logic but in my program it is working fine so you declare the fieldsymols like this and try and also check the dynamic internal contain the data or not.
FIELD-SYMBOLS : <y_i_table> TYPE STANDARD TABLE,
                             <y_wa_table> TYPE ANY.
LOOP AT <y_i_table> ASSIGNING <y_wa_table>.
    MOVE-CORRESPONDING <y_wa_table> TO y_wa_vfscaid.
    APPEND y_wa_vfscaid TO y_i_vfscaid.
    CLEAR y_wa_vfscaid.
ENDLOOP.

Data from dynamic internal table to be downloaded to App server

Dear Friends,
I have a a dynamically generated internal table and it contains huge data.And my requirement is to download the same data with a deliminator into a text file in application server.
Can you pls help me with the code....
Thanks,
jeevan.

Hello Jeevan,
PFB a code snippet for your requirement:
DATA: v_dataset TYPE fileextern VALUE './test335.txt',
      v_dref TYPE REF TO data,
      v_data TYPE string.
FIELD-SYMBOLS: <itab> TYPE STANDARD TABLE,
               <wa> TYPE ANY,
               <val> TYPE ANY.
CREATE DATA v_dref TYPE STANDARD TABLE OF ('T001').
ASSIGN v_dref->* TO <itab>.
SELECT * FROM ('T001') INTO TABLE <itab> UP TO 20 ROWS.
OPEN DATASET v_dataset FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
CHECK sy-subrc = 0.
LOOP AT <itab> ASSIGNING <wa>.
DO.
    ASSIGN COMPONENT sy-index OF STRUCTURE <wa> TO <val>.
    IF sy-subrc = 0.
      CONCATENATE v_data <val> INTO v_data SEPARATED BY ';'.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
TRANSFER v_data TO v_dataset.
CLEAR v_data.
ENDLOOP.
CLOSE DATASET v_dataset.
@Others: The OP wants to add a delimiter to the fields of a dynamic table.
>
jeevan kumar wrote:
> I have a a dynamically generated internal table and it contains huge data.And my requirement is to download the same data with a deliminator into a text file in application server.

Smartforms - pass dynamic internal tables

Hello experts,
In my smartform print program, I have created a dynamic internal table using method CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE where in my dynamic internal table <DYN_TABLE> is declared as
FIELD-SYMBOLS: <DYN_TABLE> TYPE STANDARD TABLE,
<DYN_WA>.
I am populating <DYN_TABLE> and passing it on to my smartform. Now my question is, inside my smartform, how can I declare this dynamic table <DYN_TABLE> in form interface? Please let me know. Thanks.

This could be one of the solution.
1. Create table type using data element EDI_SDATA (char 1000) , say ZTTDYN .
2. Use this as importing paramter your smarform.
3. In print program transfer the content from dynamic internal table to internal table define using ZTTDYN. You can comma seperate then fields.
4. Pass this comma separated internal table to smartform.
5. And finally proces this data in smartform.

Deleting selected record in Dynamic Internal table

Hi Friends,
I want to delete selected row from a dynamic internal table. The selected entry should be deleted from Adobe and as well as Webdynpro abap.
Kindly help me how to solve this problem.
Thanks in advance.
Regards,
Phani.

Hi Matthias,
Thanks a lot for responding.
In my adobe i kept a check box to delete the record. It should delete the selected ones. But right now, its deleting one by one.
I have coded following script for delete button:
IT_TIME_SHEET --> is my internal table
G_ROW_STATUS is the field to track the action performed.
var tlength = xfa.resolveNodes("IT_TIME_SHEET.DATA[*]").length;
for ( var i=0; i<tlength; i++
if(xfa.resolveNode("IT_TIME_SHEET.DATA["i"].FLAG").rawValue ==
1 )
IT_TIME_SHEET.DATA.instanceManager.removeInstance(i);
G_ROW_STATUS.rawValue = "DELETE";
In the Webdynpro abap following code I wrote:
    row_count = 1.
    FIELD-SYMBOLS <wa> TYPE zshr_time_sheet_time.
    LOOP AT it_time_sheet ASSIGNING <wa>.
      <wa>-srl_no = row_count.
      row_count = row_count + 1.
    ENDLOOP.
    last_row = <wa>-srl_no.
      DELETE it_time_sheet WHERE srl_no EQ last_row.
Suppose if two records checkboxes are selected I can loop at the internal table IT_TIME_SHEET in webdynpro and delete where checkbox is selected.
But problem is once user deletes records, adobe is deleting only one record and if i delete two records from webdynpro it looks like something wrong for the user.
Please help me how to solve this problem.
Regards,
Phani.

Hide or Delete Empty columns in dynamic internal table

Hi,
I am having an dynamic internal table which contains more than 100 columns.
I need to delete empty column from that table, can any one help this.

Hello,
If you are talking about ALV then you can just the the table for empty columns before populating fieldcataloge and hide the columns.
If your query is still not answered please provide a detail requirement.

Delete duplicate entriess from the internal table its urgent pls help.

Hi friends,
Hope everybody is doing good,Here is m query on delete duplicate data from the intenal table.
I have an internal table which contain data in the following format.
Doc No Comp Cod Vendor Assignment
1500000009 JM11 00000000
1500000008 JM11 20070212(Repeating)
1500000007 JM11 20070212
1500000006 JM11 00000000
1500000005 JM11 00000000
1500000004 JM11 00000000(Repeating)
1500000003 JM11 00000000 (Repeating)
1500000002 JM11 00000000
1500000001 JM11 20050302
1500000000 JM11 00000000
1500000003 JM11 10000088
1500000001 JM11 10000088
1500000030 JM11 10006260
1500000010 JM11 10006269
1500000008 JM11 10006269
1500000006 JM11 10006269
1500000004 JM11 10006269
if you see the document numbers,there are some document number which are repeating here,there are some document numer which contain vendor number but not the assignments,some of the document numbers contain the assignments but not the vendors.
If my internal table contain this kind of data with repeted document numbers than i want the document number which contains only the vendor number.
Pls help me with the appropriate logic,its urgent.
Thanks a lot
mrutyun^

Hi,
<u><b>Deleting Adjacent Duplicate Entries</b></u>
To delete adjacent duplicate entries use the following statement:
DELETE ADJACENT DUPLICATE ENTRIES FROM <itab>
[COMPARING <f1> <f2> ...
|ALL FIELDS].
The system deletes all adjacent duplicate entries from the internal table <itab>. Entries are
duplicate if they fulfill one of the following compare criteria:
Without the COMPARING addition, the contents of the key fields of the table must be
identical in both lines.
If you use the addition COMPARING <f1> <f2> ... the contents of the specified fields <f1>
<f2> ... must be identical in both lines. You can also specify a field <fi> dynamically as
the contents of a field <ni> in the form (<ni>). If <ni> is empty when the statement is
executed, it is ignored. You can restrict the search to partial fields by
specifying offset and length.
If you use the addition COMPARING ALL FIELDS the contents of all fields of both lines
must be identical.
You can use this statement to delete all duplicate entries from an internal table if the table is
sorted by the specified compare criterion.
If at least one line is deleted, the system sets SY-SUBRC to 0, otherwise to 4.
Examples
DATA: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB LIKE HASHED TABLE OF LINE WITH UNIQUE KEY COL1.
DO 4 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2.
INSERT LINE INTO TABLE ITAB.
ENDDO.
LINE-COL1 = 1.
DELETE TABLE ITAB: FROM LINE,
WITH TABLE KEY COL1 = 3.
LOOP AT ITAB INTO LINE.
WRITE: / LINE-COL1, LINE-COL2.
ENDLOOP.
The output is:
2 4
4 16
The program fills a hashed table with a list of square numbers. The DELETE
statement delete the lines from the table where the key field COL1 has the contents 1 or 3.
Regards,
Bhaskar

Logic for retreiving the values from a dynamic internal table

Hi all,
I have an issue with the logic to fetch data from a dynamic internal table into fields. let me give you guys an example the sy-tfill = 9 (subject to vary). I need to populate the fields.
Regards,
Sukumar

Hi,
this is for printing out the info in a dynamic table,
it will work likewise to insert data.
PARAMETERS:
p_tabnam TYPE tabname DEFAULT 'DB_TABLE_NAME'.
DATA:
lv_dref TYPE REF TO data,
ls_dd03l LIKE dd03l,
lt_fieldname TYPE TABLE OF fieldname,
ls_fieldname TYPE fieldname.
FIELD-SYMBOLS:
<fs> TYPE STANDARD TABLE,
<wa_comp> TYPE fieldname,
<wa_data> TYPE ANY,
<wa_field> TYPE ANY.
REFRESH lt_fieldname.
SELECT * FROM dd03l INTO ls_dd03l
                   WHERE as4local = 'A'
                     AND as4vers = '0000'
                     AND tabname = p_tabnam
                   ORDER BY position.
ls_fieldname = ls_dd03l-fieldname.
APPEND ls_fieldname TO lt_fieldname.
ENDSELECT.
IF NOT ( lt_fieldname[] IS INITIAL ).
CREATE DATA lv_dref TYPE TABLE OF (p_tabnam).
ASSIGN lv_dref->* TO <fs>.
SELECT * FROM (p_tabnam) INTO TABLE <fs>.
WRITE:
    / 'CONTENTS OF TABLE', p_tabnam.
LOOP AT <fs> ASSIGNING <wa_data>.
    SKIP.
    WRITE:
      / 'LINE', sy-tabix.
    ULINE.
    LOOP AT lt_fieldname ASSIGNING <wa_comp>.
      ASSIGN COMPONENT sy-tabix OF STRUCTURE <wa_data> TO <wa_field>.
      WRITE:
        / <wa_comp>, <wa_field>.
    ENDLOOP.
ENDLOOP.
ENDIF.
grtz
Koen

How to transfer data from a dynamic internal table

Hi All
I want to transfer data from a dynamic internal table<dyn_table>
to a non dynamic internal table itab which should have the same structure as <dyn_table>.
How can this be done?
Regards,
Harshit Rungta

As stated earlier this can be done only through field symbols...
You cannot create an non dynamic internal table with ANY structure...using DATA statement
If the strucutre is defined well and good...you can create an non-dynamic internal table...
If you do not know the structure then the internal table has to be dynamic...and to be generated using field symbols
DATA: lv_ref TYPE REF TO data.
FIELD-SYMBOLS: <fs_dyn_table> TYPE STANDARD TABLE.
* You create a dynamic internal table...
CREATE DATA lv_ref LIKE (your_dynamic_internal_table).
ASSIGN lv_ref->* TO <fs_dyn_table>.
Now...do the transfer.
<fs_dyn_table> = "your_dynamic_internal_Table
Hope it helps!

Deleting from Dynamic Internal table

Similar Messages

Maybe you are looking for