Deleting Multiple Hard Drives Quickly

Find one of these and throw them in...
https://honestnetworker.wordpress.com/2015/06/28/when-your-favorite-startup-is-acquired-by-cisco/
In all actuality, physical destruction is the easiest/most fun method of mitigating the risk. Drill press, hydraulic press, and/or target practice are my go to methods.

Has we have upgraded away from windows XP we have accumulated a lot of old computers. Before we git ride of them WE need to wipe the hard drives on them because of the number i don't want to sit down at every one of them start the wipe and wait to Finnish. Any ideas?
This topic first appeared in the Spiceworks Community

Similar Messages

Is it possible to use multiple hard drives with iphoto?

I am pretty new to Mac's so bear with me, I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives. Is it possible to run iphoto with multiple hard drives without the photos loading onto my Imac? If so, How do I set it up. I have tried importing to a external drive, but when I check the file path of the photos it shows my Imac hd in the address. I seriously dont know why I cant just add the external hard drive as a library and have Iphoto work, Help

There are instructions - and not the caveats - on how to do what you want below.
However, you'e not quite grasping iPhoto:
I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives.
When you do this, you're using the Finder (or file manager) to categorise the photos. All well and good, but why? That's exactly iPhoto's job. iPhoto is a database designed to help you manage your pics - including categorising them.
Anyway:
*How to do it:*
Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
*What Happens:*
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
*Some things to consider:*
1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
4. *Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.*
My own opinion:
I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
If you really want to spread your photos across volumes like this, Aperture would be a better fit.
Regards
TD

Wiki: Using multiple hard drives, LVM & encryption

I have lately found myself with the issue of having multiple hard drives and wanting to do LVM stuff & encryption with while retaining maximum flexibility. After scanning through wikis, manpages and forum entries I came up with a solution for myself. The only thing I don't cover with it is mounting while booting as I don't need and can't test it.
I want to share the knowledge I gained and help other people find a solution faster and so I wrote a Wiki entry (first on my user page). I would now like to hear the opinion of the community regarding the following questions:
Do you see any security risks with my solution (especially the part on storing the unencrypted keyfile on a ramdisk)?
Do you think this text is worthy for a wiki entry or should I keep it in the forums?
Do you spot any errors (typing or else)?
Would you improve this article anywhere?
Of course, if you have further comments, I would like to here them as well. And now without further ado: Using multiple hard drives, LVM & encryption.
Regards,
javex
P.S.: As a small side question: Is my user page a good playground for article creation or would you recommend some other area where to do this (since here noone else could improve the article while in this early stage)?

mwmmartin wrote:
I have a 1 TB hard drive; but I have a 500GB and 250GB usb external hard drives.
Wouldn't it be cool if I could make the two external hard drives a RAID drive and use Time Machine to use all the 750GB of external memory to do my backups???
You can, but I would +*strongly recommend against+* it. See +Concatenated RAID+ in the Help for Disk Utility.
There are several potential problems:
Depending on how much data is on your 1 TB drive, 750 GB may not be enough to back it up. See #1 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
To set up a +Concatenated RAID+ set, both drives will be erased.
When (not if) either drive fails, you'll lose all the data on both.
Both drives must be connected any time you do a backup or want to browse your backups.
Especially with USB, if one drive wakes from sleep, or spins up, quickly enough, but the other one doesn't, the backup may fail and/or your backups may be corrupted.
For now, it looks like my only solution is to go buy a bigger external hard drive and spend more money,,,
That's your best solution +*by far.+* Anything else is taking a large risk with your backups.

Multiple hard drives question

Hi:
I have multiple hard drives on my Mac Pro and I also have an iMac. I currently have Photoshop CS5 loaded on both Macs using the Snow Leopard operating system. Does anyone know if I try to load Photoshop CS5 on another hard drive on my Mac Pro swith Lion as the operating system, will that be considered like another "computer" and go beyond the two computers normally allowed?
Herman R

Does anyone know if I try to load Photoshop CS5 on another hard drive on my Mac Pro swith Lion as the operating system, will that be considered like another "computer" and go beyond the two computers normally allowed?
To my knowledge the restriction for PS activation is per computer and not per drive or operating system. At least I was able to have an old and a new system on separate HD in my MacPro with both CS5 able to run while also installed a version on my MacBook. All using Snow Leopard but I have no reason to believe this has changed for Lion.
But you are always able to install PS on more then two computers, the only downside is that you first have to deactivate one of them and activate the version on another computer. And activating and deactivating is not much work, just select it in the Help menu

Can I recover data from a reformatted hard drive? I did not do a back up prior to talking to Apple Support and the guy having me delete the hard drive and start anew. My bad but is all lost??

Can I recover data from a reformatted hard drive? I did not complete a back up prior to talking to Apple Support and the guy having me delete the hard drive (10.5.8) and start anew (10.6.3). My bad but is all lost?? Years of very important information....

You will need to purchase reovery sofware such as such as FileSalvage
http://subrosasoft.com/software/filesalvage
You can download a demo copy that will tell you what it can recover
If you want to recover that you must pay for the software then
When you do the recovery, you will need another disk drive to receive the recovered files
Having install a new operating system on the disk after the retformat is going to gradually reduce the amount of data that this software will be able to recover for you
Allan

Hard drive is full, how to make iTunes span multiple hard drives?

My mp3 drive is full. How do I tell iTunes to use multiple hard drives? It seems to only want to deal with one.

Hi, Mister Beefy.
All you have to do is go to the iTunes Edit menu > Preferences > Advanced tab > General sub-tab and change the location of your iTunes Music folder.
New files added to your Library will go to the new location, old files will remain in the old location.

Automated deployments of Windows 7 on systems with multiple hard drives

Last week I helped a customer use MDT2010 to deploy Windows 7 to ThinkStation systems with multiple hard drives. The customer has multiple HDDs in the system and wants Windows to be installed to the HDD that is connected to SATA port 1. Unfortunately Windows does not always assign "Disk 0" to the HDD on SATA port 1 - in fact it is completely random what disk ID gets assigned to which SATA port. The bug is documented by Microsoft in KB937251:
http://support.microsoft.com/kb/937251
MDT2010 uses hard-coded disk IDs (0, 1, 2, etc) to specify where Windows gets installed. And because of the bug, sometimes Windows gets installed to the HDD on SATA port 1 and sometimes it gets installed to a different HDD.
The solution is to install Windows to the HDD identified by the "SELECT DISK SYSTEM" command of DISKPART. This will always return the disk that is connected to the lowest SATA port.
To configure this in MDT2010, use the following steps (refer to the attachment):
1. copy "FormatPartition.txt" and "SystemDisk.vbs" to your Scripts folder in the Deployment Share.
2. in your Task Sequence, disable the existing step called "Format and Partition Disk" (see TaskSequence.jpg)
3. create a new step at the same location called "Format and Partition Disk (custom)". The type is "General -> Run Command Line". The command line is " cmd.exe /c "diskpart /s %SCRIPTROOT%\FormatPartition.txt" "
4. on the main screen for Deployment Workbench, right-click on the Deployment Share and select "properties", then click on the "rules" tab
5. under section [Default], add the following entries (see Rules.jpg)
    - UserExit=SystemDisk.vbs
    - DestinationDisk=#DiskID#
    - DestinationPartition=1
Hopefully this info will help someone else!
Attachments:
MDT2010.zip ‏261 KB

Last week I helped a customer use MDT2010 to deploy Windows 7 to ThinkStation systems with multiple hard drives. The customer has multiple HDDs in the system and wants Windows to be installed to the HDD that is connected to SATA port 1. Unfortunately Windows does not always assign "Disk 0" to the HDD on SATA port 1 - in fact it is completely random what disk ID gets assigned to which SATA port. The bug is documented by Microsoft in KB937251:
http://support.microsoft.com/kb/937251
MDT2010 uses hard-coded disk IDs (0, 1, 2, etc) to specify where Windows gets installed. And because of the bug, sometimes Windows gets installed to the HDD on SATA port 1 and sometimes it gets installed to a different HDD.
The solution is to install Windows to the HDD identified by the "SELECT DISK SYSTEM" command of DISKPART. This will always return the disk that is connected to the lowest SATA port.
To configure this in MDT2010, use the following steps (refer to the attachment):
1. copy "FormatPartition.txt" and "SystemDisk.vbs" to your Scripts folder in the Deployment Share.
2. in your Task Sequence, disable the existing step called "Format and Partition Disk" (see TaskSequence.jpg)
3. create a new step at the same location called "Format and Partition Disk (custom)". The type is "General -> Run Command Line". The command line is " cmd.exe /c "diskpart /s %SCRIPTROOT%\FormatPartition.txt" "
4. on the main screen for Deployment Workbench, right-click on the Deployment Share and select "properties", then click on the "rules" tab
5. under section [Default], add the following entries (see Rules.jpg)
    - UserExit=SystemDisk.vbs
    - DestinationDisk=#DiskID#
    - DestinationPartition=1
Hopefully this info will help someone else!
Attachments:
MDT2010.zip ‏261 KB

Combining Multiple Hard Drives

If I have a lot of data that needs to be split between multiple hard drives, is there any way of installing the drives but having the OS treat them as a single drive? The idea being that my file system would be just as easy to manage but I could have a huge amount of extra storage.
I've read a bit about using a RAID 0 array in order to do this, but apparently this splits up individual files between the drives to make the system faster, so if one drive fails, you've lost everything.
Is there a way of setting up the drives so that one drive is filled to capacity, then the second is filled and the third and so on? So it's just treated as one big hard drive without any file separation taking place?
Any help appreciated,
Thanks,
Adam
Message was edited by: AdColvin

what drives & capacity do you have? are they the same - match with one another?
RAID 0 "stripes" your data between a pair of usually matched drives - capacity, brand, model. 1TB drive + 1TB drive = 2TB of total storage. This makes things go fast, but isn't safe.
RAID 1 "mirrors" the data between a pair of usually matched drives - capacity, brand, model. 1TB drive + 1TB drive = 1TB of total storage. This isn't fast but keeps data safe.
RAID 10 combines both qualities above. it takes at least 4 drives, all identical, & is half of total storage. 4 x 1TB = 2Tb of total storage.
SPAN is when you take a group of disks & "add" them together to make one big pool of storage. it's not safe nor fast. a drive falling out of the array can create data loss.

Can anyone help me- I recently had an archive operating reinstall completed at the genius bar (so they didn't have to delete my hard drive), but now my battery says "not charging." It used to hold a 2.5 hour charge, and now nothing. Can anyone help?

Can anyone help me- I recently had an archive operating reinstall completed at the genius bar (so they didn't have to delete my hard drive), but now my battery says "not charging." It used to hold a 2.5 hour charge, and now nothing. Can anyone help?

Hi, Michelle. Welcome to Apple Support Communities.
Have you tried resetting the SMC? The SMC (System Management Controller) has control over the charging function, so resetting it may help.

If I completely fill my hard drive 500Gb how time machine will keep working having 1Tb of total space, I mean I have to delete mu hard drive but how I keep my previous information on time machine and keep using to with new information?

If I completely fill my hard drive 500Gb how time machine will keep working having 1Tb of total space [externak hard drive], I mean I have to delete my hard drive but how I keep my previous information on time machine and keep using it with new information?

Time Machine does not provide archival storage.
If you delete a file from your disk it will eventually be deleted from your TM backup without any notice to you.
You need a second external disk to use for archival storage.
You also need a third disk for backups of the second disk.

Help I deleted my hard drive!!

Today, I was planning on restoring my mac to factory settings. I had accidently deleted my hard drive. When I tried to restart my computer, there was no data, all there was was a blinking folder with a question mark. I immediately tried internet recovery but it had given me an error. I'm not worried about lost data. I just want to know if there is anyway to re-download my hard drive without paying any money. HELP ASAP!!

If you do not have an external drive backup, your only hope to make the Mac boot again is if you had Lion, Mountain Lion, or Mavericks installed. If so, you can restart and hold the Command and Option and R keys, then from the Utilities drop down menu, choose Install Mac OS X.
Your personal content and data are lost if there is not an external drive backup.

Colour differences & LR not deleting from hard drive

Hi,
I am running a Dell Dimension 1100, a NEC MultiSync 70 monitor, Xp SP 2 home, Olympus Master 2 and a full version of Lightroom 1.0,Photoshop CS2, and use a Olympus E-500 DSLR.
I have a slight issue with how Lightroom shows the colours of my pictures when i am comparing Olympus Master 2 v. Lightroom 1.0. Most pictures its hard to tell the difference without going back and forth constantly, but when i look at my pictures of flowers or landscapes, my pictures look so much more vibrant in Olympus Master compared to Lightroom. Is this a settings issue? or perhaps something else?
Also.....
when deleting pictures from Lightroom, it asks me if i wish to delete from the hard drive or just remove from Lightroom, when i choose delete from hard drive, after it says its done, if i go look at the folder its still there :/.
any help would be apprieciated, I am a novice dslr user and still learning how to use the softwares out there

Are you shooting images in raw or jpeg mode?
I assume that Olympus Master 2 is the raw processing software bundled with your camera. If so, then you are asking why Olympus software renders pictures differently than Lr. This question has been asked (and answered) many times but it boils down to the fact that the Olympus default rendering could be far different than that chosen by Lr. Also, Olympus may embed proprietary information in the raw image useful to Master 2 but entirely unknown to Lr.
If you want Lr to operate more like Master 2, then create a Lr preset (with the appropriate adjustments -- likely a saturation boost), then apply this preset when importing.
Finally, the camera raw engine (ACR) used by Lr is noted for producing images more muted than that produced by software bundled with cameras. In my opinion this is a good thing since the default rendering that many cameras produce is not at all natural. But the powerful Lr develop module allows me to create any interpretation I choose. Including a head spinning contrast and saturation boost.

Safari was accidentally deleted from hard drive. no trace of it anywhere. How do I get it back Do I have to reload Leopard or can I get from Apple Support page as an update

Safari was accidentally deleted from hard drive. no trace of it anywhere. How do I get it back Do I have to reload Leopard or can I get from Apple Support page as an update

You don't need to reinstall Leopard.
You can reinstall Safari from here > Safari 5.0.6 for Leopard

I somehow deleted my hard drive. Is there any way to fix this other than buying a new computer?

I somehow deleted my hard drive. Is there any way to fix this other than buying a new computer?

Sure.
If your hard drive is still physically working, simply restore it from your computer's backup.

What is the Best way to consolidate projects from multiple hard drives?

I am working on my first tv show. My team and I have been editing various clips on multiple hard drives. What is the best way to put all these different projects into one timeline while still maintaining the ability to edit individual "tracks"?
xmls?
omfs?
Please help

In project library > right click on project > consolidate media
Also
http://support.apple.com/kb/PH12706?viewlocale=en_US

Deleting Multiple Hard Drives Quickly

Similar Messages

Maybe you are looking for