Deleting the mass queue

Hi,
We have around 200k entries in the outbound queue CSA_MASS_BUPA,
We have decided that we do not require these entries.dunction module is BAPI_COPA_UPLOAD_PROXY, USER = ABC
now, users are modifying records and this queue is blocking the remaining updates under the same queue name.
How can I delete the entries ( mass delete )
The delete should work like below
delete all entries with user = ' abc' and function module = # bapi_copa_upload_proxy'
Can anyone please suggest .
Thanks.
Pratima

Gerardo,
1)No: You'll need to process them
3)The inbound and the outbound queue are not necessarily linked to each other.
- Inbound queue: transactional RFC's that need to be processed into CRM
- Outbound queue: transactional RFC's that leave the CRM flow (either for another system or for CRM itself).
=> An entry in the inbound queue is always processed by CRM flows and depending on the subscriptions it will be send to other systems (=> outbound queue).
For the inbound queue, the best thing that you can do is to:
- stop all inbound traffic (smqr)
- reprocess the queue-entries with a retry error (they are probably in error because there weren't any processes available to process them)
- find the short-dumps or Bdoc errors for the "sysfail" entries. This error means that the system failed to fully process the LUW and either a short-dump was generated (transaction ST22) or a flow error (SMW01). Normally you should be able to locate the error using the time and date of the queue-entry. If you cannot fix the error you can delete the entry in the queue with the error.
=> when all the errors are removed, you can re-activate the inbound queue again, which will then process the queue-entries automatically.
To keep your system consistent, you should always fix the errors in the inbound queue (usually the refer to missing customizing, inconsistencies in the inbound data, or program errors).
For the outbound queue: normally, this queue is independent on the inbound queue. If entries in the outbound queue are not being extracted, this means that it's blocked as well. Check the status of the TOP-entry in the outbound queue & reset it if necessary.
Hope this helps,
Michael.

Similar Messages

How to delete the delta queue in the ECC

Hi everyone!
After I tryed to save a new Infopackage and I have the error :
(Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init
Message no. RSM1071
Diagnosis
Deltas have already been loaded for the init. selection of request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG. A second initialization is therefore not possible with these selection conditions.
Procedure
If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
As the error says - Deltas have already been loaded for the init. selection.
Can you please give me some links/guids which describes how to delete the delta queue in the source system, and restart the delta process.
thank you, Ron

Hi,
Assuming as you need to the reinit for same selections.
in such case you need to delete old init.
how to delete init:
Go to your info pack screen, menu Scheduler--> initialization options for source system--> here you can see the existing init, select init(green) and delete it.
Later you can trigger your init info pack with selections.
Thanks

How to delete the data in update queue and delta queue for Queued delta?

Dear BWers,
How do i delete the delta queue and update queue data before i fill the setup tables for a extraction based on Queued delta. Please help.
Thanks
Raj

Hi Raj,
I think you need some ground work for the LO extraction same as others here. Please read the 3 blogs expliciltly created for LIS by Robert Negro.
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
As well, the OSS 380078 would clear your doubts reagrding the the BW QUEUE mainatinance.
Please let me know if these material has been suffecient enough.
regarda,
raj

Unable to delete entries from queue (SMQ2)

Hi
I am unable to delete entries from inbound queue due to number of entries are too high (Approximately 160,000). Deletion in dialog mode producing timeout error...Is there any way to delete these entris in background mode or any other idea about this situation..
Your valuable time & annswer appreciated.
Thanks
Rakesh

Hi Rakesh,
   Check these threads on SMQ2. It may give some help to you:
   Queue issue
   deleting the inbound queue tc smq2
   Also check this file:
http://help.sap.com/saphelp_nw04s/helpdata/en/d9/b9f2407b937e7fe10000000a1550b0/frameset.htm
Regards,
Subhasha Ranjan

Deleting completed print queue

I am having a problem deleting the COMPLETED PRINT QUEUE from Preferences Print & Fax. I can delete the Active Queue, but haven't found how to delete the Completed Print Queue. I now have 3 years plus of Completed Print Jobs in the queue, and think some need to be deleted. Need help!

I wish I could give proper credit to whom educated me, but I don't remember who it was. Here is an excerpt of an email thread or discussions post thread that I retained that might be helpful to you:
> where do the log files of completed print jobs and completed faxes reside?
They aren't stored in a "log" file per se. Each job's control data and status
is stored in /var/spool/cups.
> I'm wanting to develop a log rotation and archival scheme of these log
> files to add to the /etc/periodic/monthly/500.monthly script, so these
> printer and fax files do not tend to grow inordinately large.
Depending on your needs for log rotation, it might be much easier to just
specify the maximum number of job histories you want to keep. This can be
done via the cupsd.conf (/etc/cups/cupsd.conf) file. Look at about line 218
for:
# MaxJobs: maximum number of jobs to keep in memory (active and completed.)
# Default is 500; the value 0 is used for no limit.
#MaxJobs 500
Alternatively, you could turn off the option for keeping any history at about
line 190:
# PreserveJobHistory: whether or not to preserve the job history after a
# job is completed, cancelled, or stopped. Default is Yes.
So this might give you a clue as to where to start pokin' around...

How to delete the messages from JMS Queue

Hi,Can anybody help how to delete the messages from the JMS Queue.Thanks in advance.

You can dequeue the message using a JMS client or delete it using Weblogic Admin Console -
http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/jms_modules/queues/ManageQueues.html
Regards,
Anuj

Is there a way to mass/multi delete photos in all messages without deleteing the message

i have iOS 7, iPhone 4s and Mavericks.
i know i can tap and hold on the photo and the "more" option appears, then flip through the conversation and select individual messages to delete within that conversaion. but i have so many ongoing texts that i dont want to delete, and most have many photos within the message that go months back that i dont need. i dont want to delete the entire conversation but i dont need the photos embedded in the message. im tired of deleting photos from the message as soon as i read or sent a photo text. is there an option in the phone or an app that will mass delete embedded photos within all texts. either iphone or mac app would work... or a script... anything! i would even be happy with selecting all phones to delete across all messages the way the camera roll allows you to delete. its seems like an obvious option.
thanks

Open the Settings app > Notifications > Messages. Scroll down adn turn OFF "View In Lock Screen". You may want to consider setting Alert style to none, but this will not impact what happens when the screen is locked.

Need to delete the SPAM requests from the import queue

Dear all,
There were some issues with my QA system SAP patch application and we were forced to do a DB refresh from our production system. Now our QA system ABAP stack is having an issue with the STMS import queue which shows 4 old patches(witch were applied to the system before the refresh) with u201Crequest will not be importedu201D status. When I try to delete these requests from the import queue it shows the following error
u201CThis is tp version 372.04.29 (release 700, unicode enabled)
ERROR: Client 'ALL' is not possible.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0246
standard output from tp and from tools called by tpu201D
When I try to import a new support package it gives the following error,
Error in phase: CHECK_REQUIREMENTS
Reason for error: QUEUE_NOT_EMPTY
Not sure how these requests arew still in the import queue even after the DB refresh. How can I delete these 4 old requests from the import queue?
The System is ECC6.0 ABAP+JAVA stack with Oracle 10g on Win2003 server.
Thank you,
Siju Sam

Dear Ganesh,
I have tried the steps you suggested, but still the import queue is not cleared.
Now I just wanted to remove these entires from the STMS=>queue=>import queue list.
Number   Request      Clt   Owner          Short Text
     1   SAPKB70013   ALL   SAPUSER        Basis Support Package 13 for 7.00
     2   SAPKA70013   ALL   SAPUSER        ABA Support Package 13 for 7.00
     3   SAPKB70014   ALL   SAPUSER        Basis Support Package 14 for 7.00
     4   SAPKA70014   ALL   SAPUSER        ABA Support Package 14 for 7.00
I think these requests(Patches) are not there in the tp buffer/(import queue) but somehow some table entries shows the status that they are still in the queue. So I just wanted to reset the status that These TPs are already applied.
Thank you,
Siju Sam

Mass delete the parked EDI LIV invoices

Hey Guys:
I want to Mass delete the parked EDI LIV invoices. I have implemented note <b>971193 - FIPP: Mass deletion of parked documents</b> which is pulling data from FBV0...which is not the place where parked EDI LIV invoices are in.
I have found a table RBKP which is having my parked LIV invoices document numbers.
Can some of you give me a solution from where exactly we can mass delete these parked LIV invoices which have not touched the F1 yet.
Thanks
Gitaa

Have you tried Mir4

Deleting the material view in mass

Hi Friends
The material master is created using LSMW in mass. The material list in the file itself is given wrong so a particular view is create in mass. Now the user says to remove the materials view in mass. How to do it. Is there any FM to remove or delete the particular view of a material. I want to remove the view in mass.
Regards
Vijay Mukunthan

It is not forseen to remove created views.
you can only flag organisation level for deletion and subsequently run archiving with SARA object MM_MATNR, to physically remove this org level (this requires customizing)
technically the PSTAT fields at various levels (MARA, MARC, MBEW) control which view is created.
Usually you do not only have the status set, you usually have as well some fields filled in a view, as most views have mandatory fields.
If you load with BAPIs or IDOCs, then it shouldn't be a big deal to overwrite the existing material master with correct data in a new load (dont do it if you have the material already used)

How to delete Subroutine Pool and delete the custom report in mass

Hello,
How to delete the subroutine pool
Is there any transaction to delete report mass.
Thanks in advance,
Best Regards,
Suresh kumar K

You can use FM RS_DELETE_PROGRAM in your program and pass all the programs
that are to be deleted into that FM using TADIR table..
Alternatively you can create a bdc for the same.

Where is the printer queue stored - and how to delete all queue jobs?

I ran into a problem after I installed the Roll paper feeder on my Epson R1800. All of a sudden files will not print anymore.
One thing that may cause a problem is that there are two previous files (pdf I think) that someone else tried to print yesterday looking for a different printer on regular Letter size paper that are still in the queue because they did not print successfully. Everytime I tell Photoshop to print my photo on the Roll paper, those two old jobs pop back up on the printer queue gui and the system stops saying "wrong paper type for this job". Then I delete those two old jobs so there is only the Roll paper one left but it just sits there and wont print. When I launch the utility to check is all is kosher, sometimes it will give me the ink cartridge levels without a problem but sometimes it claims a communication error. I have re-checked the connection and everything and all is OK. When I launch the printer utility and tell it to print a Nozzle Check test, it prints it without a problem so there really is no prob with the communication.
When I restart the computer and the printer and try again, the two old jobs that I deleted in the previous step always reappear. So I wonder if, those two pdf jobs are kinda screwing with the system and should be deleted. But as i said, everytime I delete them, they look like they disappear from the list but my photo job just sits there on the queue without printing. The jobs are not stopped and there is no Hold on this one. If I quit and re-launch the print job, the old ones re-appear in the queue. So they must be stored someplace and are not deleting correctly. Does anyone know where this cue file is stored and what it is called? I have looked in Application Support and in Preferences but I can't see anything that looks like it.
I have downloaded the drivers from Epson for this printer again but that doesn't do anything either. I am using 10.4.11 on an 24 inch iMac intel 2.4Ghz. I only use the stock Apple utilities, no funky third party addon except for the Epson drivers. The printer utilities are:
Epson Printer Utility v3.01
Stylus R1800 utility v4.7(161.10)
Thank you for any help.
Bo

Hooray, we found the problem! BOO, we already found the problem elsewhere!
Sooo, it seems we have some kind of Permission problem, have you Repaired Permissions ad rebooted?
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.
Or we could maybe go back to that window, click on Printers, remove it? (Thinking perhaps the jobs will go away with the printer!?)
Or would you like to delve into the hidden folders/files to try to handle this?

How to view the planned orders in mass and how to delete in mass

Hi gurus,
How to view the planned orders in mass and how to delete in mass.
Regards
R.Rajakarthik

Hi,
Use the collective display of planned orders, transaction code MD16.
You can select the data by different options and choose which ones or all that you need to delete.
Click the Delete button to trash them.
This will delete planned orders without deleting the planned independent requirements and sales orders.
Hope it helps

I just watched a Netflix movie using my iPad 2. Now I need to know how to return the movie using my iPad 2 and deleting the movie from my queue?

I just watched a movie using my iPad 2. Now I need to know how to return and delete the movie from my Netflix queue and account using the iPad 2?

Perhaps this question would be better answered here:
http://www.netflix.com/Help

How do I delete files permanently from the download queue?

I have a bunch of TV shows and songs that are in my download queue because I accidentally clicked "download" twice. Every time I want to download or import something else, all 47 of these items come up and attempt to start downloading. Each time I delete them all from the queue, they come back to haunt me and begin downloading again the next time I want to download something. Some of them have been trying to download since 2008. How do I permanently prevent them from downloading to my computer?

In addition to what Drew wrote, remember the Mac has a data fork and a resource fork.
Here is an old thread but a nice recap by Dr. Smoke
._Files
Note that the ._file files you note are the resource forks of Mac files you copied to the drive from your Mac, and these are only visible when you use the Flash drive on a PC. These are normal and indicate the Flash drive is already formatted for Windows.
When you copy or save a file from a Mac OS X system to a Windows shared volume or a Windows-formatted disk, the Mac creates two files: the data fork (xxx) and the resource fork (._xxx). This is called Apple Double Format and is normal. The resource fork contains additional data about the file that is exclusive to the Mac that cannot be saved otherwise on Windows-formatted disks. This is new with Mac OS X, as documented in Mac OS X: Apple Double Format Creates File Name With the Prefix '._'.
The resource fork files (._xxx) are necessary if you want to copy the file back to the Mac and retain the metadata. The resource forks of files are invisible when they are used on the Mac: the Mac OS Extended file system (aka HFS Plus or HFS+) uses forked files, with a file having both data and resource forks.
You can delete the resource forks on the Windows disk if and only if you don't care about losing the resource fork information should you copy them back to the Mac, such as comments, image preview icon, etc. Some Mac applications use the resource fork data, so deleting the resource fork can be problematic if you copy the file back to the Mac. Likewise moving the file while not also moving its associated resource fork when using the data on a PC can result in problems when using some files again on the Mac.
You can't prevent the resource forks from being created if you copy or save files from the Mac to the Windows share or Windows-formatted disk via Finder.

Deleting the mass queue

Similar Messages

Maybe you are looking for