Deletion of Function modules

Hi,
i am trying to delete the FM but system is not allowing me to do so it says that the object has been locked by transport request
when i had closer look it is nothing but Function group which is locked. we create all our FMs in a single Function group
so all newly FMs that were in development are included in this group and therefore i cannot delete my FM
what would be the procedure to do the deletion of FM?
Raj

Hi
you just create a Dummy Function Group ZGRP
Then --> Go to SE37
Enter your function module name
--> Menu >Function Module> Other Functions-->Reassign
(or) Press ctrl+F7
ther you can reassign the function group (i.e.you assign the newly created Dummy fuction group ) and after you can delete it with out any risks.
Hope this will help you
Thanks & Regards
Mallikharjuna Reddy

Similar Messages

How to delete a function module from function group

I want delete a function module form function group.. iam unable tp do that , when i dlete that FM , it is saying " ralated objects are locked in another request"
what to in this case?
Pls anybody help me in this...
Regards,
pandu.

Hi,
go to se80
type the function group and press enter
select the function module right click and delete.....
before that see the request number the FM is attached and delete that from that request and try deleting it
Reward if usefull

Error on SAPLZ001 program after deletion of Function Module

Hi,
I got some problem with my datasource (processed by a function module), this error occurs after I delete the FM in D because this will not be used in Q.
Below is the details of my problem, Hope you can help me soon. thank you very much
Includes LSVIMFTX
Field "FORBIDDEN_FUNC_NAME_CHARS" is unknown
History of the problem:
After Q refresh, we need to retransport all TR that are existing to Q01
before the refresh.
The Error occurs when retransporting existing Datasource process by a
function module to Q01
Error Message:
Program SAPLZ001, Include LZ001UXX: Syntax error in line 000011
INCLUDE report 'LZ001U07' not found
this is because 1 function module is missing in the Q but the FM name
exist in the LZ001UXX under LZ001U07.
But since the missing FM is no longer needed, I decided to delete this
FM in Dev and transport the changes done to Q, hoping that the failed
datasource transport will be successful after retransport.
After I did the deletion, a new error occurs when releasing the TR, it
says:
Includes LSVIMFTX
Field "FORBIDDEN_FUNC_NAME_CHARS" is unknown
I check manualy the program LSVIMFTX and it says there is no syntax
error.
But when I check SAPLZ001 program the error occurs.

The FM is for data extraction, I created a Datasource that processed by a FM.
Yes, I get this error in Dev originally, but before I deleted the FM in D, this work fine and when I deleted and transported the action "delete FM" to Q it fails, then when I check it in Q the Q now is having the same problem with D.
I am trying to change the version in D and transported to Q, but transport always fails.
changing version didnt fix the problem with.
Thank you very much for your time...

Deleting a function module

Hello All,
I created a function module using SE37. When asked for the function group, i entered the function group also. Now I want to delete this function so that it is removed from the function group also. Could anyone please tell me how this can be done.
Thanks in advance
Regards
Sudha

Hi,
Goto Se37
Enter the Function module name
Press <SHIFT> + F2.
Else goto SE80,
In the dropdown Select Function Group
Give the function group name
Right click on the function module name and select
"Delete".
Regards,
Sesh

Function modules from the function pool Z_MEREP_G (Message no. MEREP_00530)

We installed a new system and imported the syncbo definitions to this new system.
After the import and generation of all T01 SyncBOs we get an error. E.g. for MAM25_016:
Function modules from the function pool Z_MEREP_GEN_T01_MAM25_016 contain syntax errors
Message no. MEREP_00530
After investigation the following syntax error is shown:
Source code LZ_MEREP_GEN_T01_MAM25_016U04 Line 641
The FORM "MAM25_016_CONV_NAME" does not exist, but there is a FORM with the similar name "MAM25_016_I_CONVERSION".
"MAM25_016_I_CONVERSION".
We are already using three systems D -> Q -> P. The export/import of files between these systems work okay. But not with the new system. All are on NW04 SPS 18. In the other systems the form is available.
Does someone have an idea how to solve this?
Thanks in advance,
Benjamin de Rijke

Hello Rahul / Karthick,
Thanks for the tip, I already reimported these with no effect. Next to this I deleted the function modules for a Z-syncbo (our own developed one). But this didn't help as well. The MAM-SyncBO function group can not be deleted because the system is not a developement system. We are not allowed to develop things in this environment.
I have the feeling that it has something to do with the initial setup of this system. All the others were first on SPS15 were we developed the SyncBOs. At a certain time we updated the systems to SPS18 and developed further. No issues so far regarding the import / export of the files from D to Q and P.
Now we initial installed a new system on SPS18 and on this one the generation failes with the mentioned syntax error.
Kind regards,
Benjamin

How to down lode function module & how to uploaded

Dear friends,
Iam trying 2 transport request 4m development 2 production ,
unknowing i deleted customized function module,
Same functional module was in other client plz guide me how to downloaded functional module & how to up lode ,
How to down lode function module & how to uploaded
Regards,
Reddy

Hello,
Create a request of type Transport of Copies.
Go to transaction SE03 , select the option Include Objects in a Transport Request, select the object, include in your request and liberate it.
Then copy the DATA and COFILE of this request to your destination system and import it in transaction STMS.
Take a look at this: Transport error!
Regards,

Function modules or BAPI for deleting plan costs on a cost center

Hi all,
I search for a function module or bapi to delete plan costs / activity on a cost center.
At the moment I update the planning with 0, but that cause a mass of needles entries on the cost centers.
For check and posting I use the function group 6026 - BAPI_COSTACTPLN_* ,
but there is no function for deleting.
Has anyone an idea?
Thx for help - points as reward !

check
BAPI_COSTACTPLN_POSTACTINPUT   Activity Input Planning: Posting
BAPI_COSTACTPLN_POSTACTOUTPUT Activity/Price Planning: Posting
BAPI_COSTACTPLN_POSTKEYFIGURE Stat. Key Figure Planning: Postings
BAPI_COSTACTPLN_POSTPRIMCOST   Primary Cost Planning: Postings
BAPI_PDTRANSCO_POSTPRIMCOST    Transfer of Planning Data: Post Primary Costs
K40C                           CO Actual Postings, Manual
BAPI_ACC_PRIMARY_COSTS_POST    Accounting: Post Primary Costs
BAPI_COPAACTUALS_POSTCOSTDATA BAPI Operating Concern: Post Costing-Based Actua
BAPI_PRIM_COST_CHECK_AND_POST Primary Costs: Formal Parameter Check
S@meer

Which function module to delete job log?

Hi, I submit report via jobname and jobcount. After I close job and run it, we can see jobname is still in job log by SMX. But client doesn't want to see it, so who can kindly tell me which function module can delete jobname from job log?
Thanks a lot.
Jack

try CALL FUNCTION 'BP_JOB_DELETE'
If you have used JOB_OPEN before the SUBMIT to create the job, you can automatically delete the job upon successful completion by setting the parameter DELANFREP = 'X' in the JOB_OPEN function call.. this way the user will only see the logas for cancelled/aborted jobs..
~Suresh
Message was edited by: Suresh Datti

Is there any BAPI or function module to delete entries from a table (VBAK)

Hi Everybody,
this is my first thread in SDN...
my problem follows...
A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
tables:
VBAK     sales document: header data
selection fields:
VBAK-LIFSK      ≠     <BLANK>
VBAK-ERNAM     =     userID used by e-Sales / IVE
          (EP-BATCH / EAI-BATCH)
VBAK-ERDAT      <=     Current system Date
VBAK-ERZET     <=     Current system Time - 20 minutes
These orders should be deleted from SAP system.
This report should be scheduled to run regularly every 10 minutes.
my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
best replies will be rewarded....
regards
Reddy

Hi Vasanth ,
thanks for your reply.
i tried in the same manner what u mentioned.
but how to pass only one parameter to the functionmodule..
here in this case we have to pass only update flag as 'D'..
i did the same it giving dump..
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "ORDER_HEADER_INX".
Although the currently specified field
"INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.
my pgm :
*& Report YNEW_ORDER_DELETION
REPORT ynew_order_deletion.
TABLES:vbak.
PARAMETERS:
     p_lifsk LIKE vbak-lifsk DEFAULT '02'.
SELECT-OPTIONS:
   s_lifsk FOR vbak-lifsk DEFAULT '10',
    s_ernam FOR vbak-ernam,
    s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
    s_erzet FOR sy-uzeit.
*PARAMETERS:
p_erzet LIKE sy-uzeit.
   s_erdat like vbak-erdat,
   s_erzet like vbak-erzet.
DATA:
   BEGIN OF int_final OCCURS 0,
        w_vbeln TYPE vbak-vbeln,
   END OF int_final.
DATA:
int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
DATA:
wf_time TYPE sy-uzeit.
INITIALIZATION.
s_ernam-low = 'KULKARMA'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
s_ernam-low = 'EAI-BATCH'.
s_ernam-sign = 'I'.
s_ernam-option = 'EQ'.
APPEND s_ernam.
wf_time = sy-uzeit - 1200.
p_erzet = sy-uzeit - 1200.
p_erzet-low = wf_time.
APPEND s_erzet.
int_order_header_inx-updateflag = 'D'.
APPEND int_order_header_inx.
START-OF-SELECTION.
SELECT vbeln FROM vbak
                   INTO TABLE int_final
                   WHERE lifsk EQ p_lifsk
                     AND ernam IN s_ernam
                     AND erdat IN s_erdat
                     AND erzet IN s_erzet.
IF sy-subrc = 0.
    LOOP AT int_final.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
        EXPORTING
          salesdocument         = int_final-w_vbeln
ORDER_HEADER_IN             =
    order_header_inx            = int_order_header_inx
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
LOGIC_SWITCH                =
NO_STATUS_BUF_INIT          = ' '
        TABLES
          return                      = int_return
ORDER_ITEM_IN               =
ORDER_ITEM_INX              =
PARTNERS                    =
PARTNERCHANGES              =
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
SCHEDULE_LINES              =
SCHEDULE_LINESX             =
ORDER_TEXT                  =
ORDER_KEYS                  =
CONDITIONS_IN               =
CONDITIONS_INX              =
EXTENSIONIN                 =
    ENDLOOP.
    LOOP AT int_return.
      WRITE:/ int_return-type,
              int_return-id,
              int_return-number,
              int_return-message.
    ENDLOOP.
ENDIF.
please help me ..its a very urgent issue to be solved...
am waiting for ur reply...
regards
gangareddy

Program or Function module to delete data from Open Hub Destination Table

Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay Kumar

You can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder

RFC enabled function module for insert update and delete in a Ztable..

friends..
Is there any standatd RFC enabled function module to insert , update and delete data in a custom database-table (Ztable)? if not how can we create it? plz give me the details steps..
what are the import, export parameters and how to develop and process it.. (for example: suppose fields in the table is Emp_Id, Name, Address)
Thanks and Regards

Hi,
Try this code.
REPORT ZMMC071Z_RMV.
TYPE-POOLS : ABAP.
FIELD-SYMBOLS: <DYN_TABLE> TYPE STANDARD TABLE,
               <DYN_WA>,
               <DYN_FIELD>,
               <LV_CONDI>.
DATA: DY_TABLE TYPE REF TO DATA,
DY_LINE TYPE REF TO DATA,
XFC TYPE LVC_S_FCAT,
IFC TYPE LVC_T_FCAT.
SELECTION-SCREEN BEGIN OF BLOCK F1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_TABLE LIKE DD02L-TABNAME OBLIGATORY.
SELECTION-SCREEN END OF BLOCK F1.
Evento: At Selection Screen                                          *
START-OF-SELECTION.
PERFORM GET_STRUCTURE.
PERFORM CREATE_DYNAMIC_ITAB.
PERFORM GET_DATA.
END-OF-SELECTION.
*& Form get_structure
text
FORM GET_STRUCTURE.
DATA : IDETAILS TYPE ABAP_COMPDESCR_TAB,
XDETAILS TYPE ABAP_COMPDESCR.
DATA : REF_TABLE_DES TYPE REF TO CL_ABAP_STRUCTDESCR.
DATA VL_LENGHT(30).
Get the structure of the table.
REF_TABLE_DES ?=
CL_ABAP_TYPEDESCR=>DESCRIBE_BY_NAME( P_TABLE ).
IDETAILS[] = REF_TABLE_DES->COMPONENTS[].
LOOP AT IDETAILS INTO XDETAILS.
    CLEAR XFC.
    XFC-FIELDNAME = XDETAILS-NAME .
    XFC-DATATYPE = XDETAILS-TYPE_KIND.
    XFC-INTTYPE = XDETAILS-TYPE_KIND.
    XFC-INTLEN = XDETAILS-LENGTH.
    XFC-DECIMALS = XDETAILS-DECIMALS.
    APPEND XFC TO IFC.
ENDLOOP.
ENDFORM. "get_structure
*& Form create_dynamic_itab
text
FORM CREATE_DYNAMIC_ITAB.
Create dynamic internal table and assign to FS
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG = IFC
    IMPORTING
      EP_TABLE        = DY_TABLE.
ASSIGN DY_TABLE->* TO <DYN_TABLE>.
Create dynamic work area and assign to FS
CREATE DATA DY_LINE LIKE LINE OF <DYN_TABLE>.
ASSIGN DY_LINE->* TO <DYN_WA>.
ENDFORM. "create_dynamic_itab
*&      Form get_data
      text
--> p1        text
<-- p2        text
FORM GET_DATA .
*Get data from p_table into internal table <DYN_TABLE>
SELECT * INTO TABLE <DYN_TABLE>
      FROM (P_TABLE)
Here you can implemente function DELETE, INSERT.
ENDFORM.                    " De_para

Search for a function module for deleting document originals (DMS)

Hi,
I'm searching for a function module to delete originals in documents (like manually with transaction cv02n). I'm only able to set an delete mark with the module 'BAPI_DOCUMENT_DELETE'.
The module 'BAPI_DOCUMENT_CHANGE2' can only add new originals to an existing document. I need a possibility to delete all originals in an document without deleting the document itself.
Has anyone an idea?
Thanks.
Jan-Christian Treusch

Many thanks!
That's especially the method I've searched for so long....
best regards.
Jan-Christian Treusch

Function modules for delivery creation, change, deletion.

hi all,
anyone know and worked on function module to create/change/delete deliveries with reference to sales order/without reference of sales order.
if any one knows about the function modules please let me know.

BAPI_DELIVERYPROCESSING_EXEC will allow you to create an outbound delivery, but this is <b><u>not released</u></b> for customer use yet(Rel.47). Type that function module in the forum search area and you will get some sample code.

Function modules for deleting photos in archive

Hi all,
I got the requirement to delete the photos which was uploaded through archive link (OAAD).
Could I know which function modules should I use to delete the link as well as document?
When I searched in forums I found some function modules:
ARCHIVE_OBJECT_DELETE
HRXSS_COD_DELETE_OLDPHOTO
But these function modules doesnot exists in my client.
Could you suggest me some other function modules with parametrs passing.
Also explain me how to pass parameters for SCMS_DOC_DELETE function module.Is this helpful for deleting of photos?
Thanks in advance.

Hi Harika,
you could try using the FM ARCHIV_DELETE_META.
Also, the FM HRXSS_COD_DELETE_OLDPHOTO appears to have been create for this purpose of deleting employee photos; and only requires the personnel number to be entered.
KR,
Karen.

Function module/ program for deleting Vendor purchasing org. in BBPMAININT?

Hi,
Is there any function module or program available by which i can delete purchasing org. maintained for SRM vendors in BBPMAININT.
Regards
Bharat M

Hi
Please use the Standard SRM function module
*BBPPORG_DELETE*_
to delete the Purchasing organizations ->
Sample code - >
    CALL FUNCTION 'BBP_PORG_DELETE' IN UPDATE TASK
      TABLES
        IT_FRG0060 = LT_FRG0060
        IT_FRG0061 = LT_FRG0061.
    COMMIT WORK.
Hope this will help. Do let me know.
Regards
- Atul

Deletion of Function modules

Similar Messages

Maybe you are looking for