Error on SAPLZ001 program after deletion of Function Module

Hi,
I got some problem with my datasource (processed by a function module), this error occurs after I delete the FM in D because this will not be used in Q.
Below is the details of my problem, Hope you can help me soon. thank you very much
Includes LSVIMFTX
Field "FORBIDDEN_FUNC_NAME_CHARS" is unknown
History of the problem:
After Q refresh, we need to retransport all TR that are existing to Q01
before the refresh.
The Error occurs when retransporting existing Datasource process by a
function module to Q01
Error Message:
Program SAPLZ001, Include LZ001UXX: Syntax error in line 000011
INCLUDE report 'LZ001U07' not found
this is because 1 function module is missing in the Q but the FM name
exist in the LZ001UXX under LZ001U07.
But since the missing FM is no longer needed, I decided to delete this
FM in Dev and transport the changes done to Q, hoping that the failed
datasource transport will be successful after retransport.
After I did the deletion, a new error occurs when releasing the TR, it
says:
Includes LSVIMFTX
Field "FORBIDDEN_FUNC_NAME_CHARS" is unknown
I check manualy the program LSVIMFTX and it says there is no syntax
error.
But when I check SAPLZ001 program the error occurs.

The FM is for data extraction, I created a Datasource that processed by a FM.
Yes, I get this error in Dev originally, but before I deleted the FM in D, this work fine and when I deleted and transported the action "delete FM" to Q it fails, then when I check it in Q the Q now is having the same problem with D.
I am trying to change the version in D and transported to Q, but transport always fails.
changing version didnt fix the problem with.
Thank you very much for your time...

Similar Messages

ME52n - Error Message - Company was not supplied in function module.

Hello,
It is giving error Message - "Company was not supplied in function module" in the initial screen of ME52n and ME53n.
Please help.
Thanks,
Piyush

Hi Vadi,
when ever you open me52n or me53n ..system by default opnes/shows your last created/ opned PR.
so if that last created / changed PR is having wrong/faulty data (missing assignment/ plat stolocation deleted etc) ..system will not be able to fetch respective data....thats why you will get above eror message...
Solution : Create any smaple PR in ME51n/ or try to chnage any existing PR.. and then save it.
try this 1 or 2 times.
Hope so this will help.
Regards,
Nilesh

Can we write leave program syntax in RFC function module.

hello friends,
can we write leave program syntax in RFC function module. Iam developing RFC Function module .
useful answers will be awarded..
Regards
Kanth
Edited by: Kanth on Mar 30, 2008 11:38 PM

Don't use leave program in RFC function module. You can better use EXIT or RETURN. But when developing RFC modules you should use the return structure BAPIRET2 to store message generated in the calling system. So when you use EXIT or RETURN, first give a message so the calling program knows why the RFC module was exited.

How to delete a function module from function group

I want delete a function module form function group.. iam unable tp do that , when i dlete that FM , it is saying " ralated objects are locked in another request"
what to in this case?
Pls anybody help me in this...
Regards,
pandu.

Hi,
go to se80
type the function group and press enter
select the function module right click and delete.....
before that see the request number the FM is attached and delete that from that request and try deleting it
Reward if usefull

How can I execute program after using F4_Filename function?

Hi all,
I'm a new user on the forum. I've been working with ABAP and SAP for a few weeks. I wrote a program for importing data from excel file to SAP using BDC. During searching this forum I found information about F4_Filename function which allows users to browse the disc for a file. I'd like to add this function to my program. I have a parameter for a file name but this is an ordinary static string field. When I added the code which I found in the message on this forum the rest of program doesn't execute.
This is simple program for example:
REPORT Z_TEST8_AB.
DATA f_name TYPE STRING.
PARAMETERS p_file like rlgrap-filename DEFAULT 'c:\test.xls'.
f_name = p_file.
write:/ f_name.
This program works correctly. There is a field for parameter. I can change the default name for a file.
After all, I can run the program (F8) and rest of the code is executed. The field for parameter dissapears from the screen and the file name is displayed. ( command write)
Now I added a function F4_Filename
REPORT Z_TEST8_AB.
DATA f_name TYPE STRING.
PARAMETERS p_file like rlgrap-filename DEFAULT 'c:\test.xls'.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
       exporting
            program_name = syst-repid
            dynpro_number = syst-dynnr
            field_name    = 'p_file'
       importing
            file_name     = p_file.
f_name = p_file.
write:/ f_name.
I can browse a computer for a file now but after selecting the file I can't run the rest of the code. When I click on the icon or press key F8 the field for parameter doesn't dissapier and the command write is not executed.
What do I do wrong?
Could anyone suggest me a solution? How can I executed the code after using this function?
Thanks in advance.
Regards,
Arek.

Hi arkadiusz,
1. simple
2.
<b>start-of-selection.</b>
f_name = p_file.
write:/ f_name.
regards,
amit m.

Syntax error in standard program after upgrade

Hi,
After upgrade from 7.0 to 7.3, we are facing a syntax error in standard program that is used in one of our process
The error says:
The field "G_REQUIDPARENT" is unknown, but there is a field with the s"
imilar name "G_REQUID_LAST". "G_REQUID_LAST"."
The system cannot find this object inside include LRSBM_REQUEST_GUIP04, that belongs to program SAPLRSBM_REQUEST_GUI
We assume that this is associated with the upgrade but we cannot find any solution in the web. Besides, this is a standard program so we cannot perform any change directly. We look for SAP Notes to apply but we didn't find nothing worthwhile
Basically, we are receiving a dump with the error message posted above and we found the syntax error, but the thing is that we don't know how to fix it, due to the fact that is a standard program and we cannot change it
I know that SAP could remove some object reference during the upgrade, but there should be an anticipated plan to fix this kind of errors, right?
Can you shed some light on this, please ?
Thanks a lot
Ale

Hi Ale,
If you make sure there are no customization around the object and SGEN already run, I think you can just open a OSS message to SAP to looking for a fix.
Regards
Bill

Create generic component to handle errors after using the function modules

Hi,
Please provide steps to create a generic component to handle the BAPI Return structure meesages after the function calls..
Please let me know how to pass the structure or internal table from one component to other.
Thanks in Advance,
SV
Moderator Message: No Step-by-steps will be provided here. Either take a classroom course or search for SAP Documentation
Edited by: kishan P on Dec 10, 2010 3:14 PM

Hi Hari,
Plz give me ur mail id.. i will forward some documents regarding Generic Extraction using FM and query...
For function module means.. you have to create function module. in RSAX..in R/3 side
and you want to extract data using Query means...you have to create Infoset query in (SQ01,SQ02,SQO3) IN r/3 Side
you can refer this blog also..
to Function module "RSAX_BIW_GET_DATA_SIMPLE" and there is very good weblog . Search "generic extraction" for weblog. /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
thanks
@jay

Error occurred while loading Generic extraction using Function module

Hi all
I'm trying to do INIT for Generic Extractor using Function module, but i'm getting error as "Error occurred in the source system"
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Job terminated in source system --> Request set to red
Message no. RSM078
Can u help plz....

Hi Vishnu
This are the Job log details i found in source system...Can u tell what whould be the problem?
Message
Job started
Step 001 started (program SBIE0001, variant &0000000002861, user ID
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZYFI102
RLOGSYS    =
REQUNR     = REQU_D9Y4CZDQULRIHRRVU33KOLQZO
UPDMODE    = D
LANGUAGES = *
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 10737418240                             *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000000                                 *
ztta/roll_extension........... 2000000000                              *
No authorization for Acct type D
Job cancelled after system exception ERROR_MESSAGE
Thanks in advance
Edited by: MohanDP on Feb 25, 2011 11:58 AM
Edited by: MohanDP on Feb 25, 2011 12:01 PM

Error 101 using fp_job_open, fp_job_close in a function module

I have earlier made a program generating a pdf used for printing. Used fp_job_open -> Call function xxx -> fp_job_close. This program works fine.
Now I want to make a function module to generate this pdf for higher reusability, but when I call my generated FM its return sy-subrc = 1 and sy-msgno = 101. As far as I have investigate this error means "Job already open".
I tried to comment out the call to the fp_job_open and fp_job_close, but then I have no possibility to mark the ls_outputparams-getpdf = 'X' and ls_outputparams-nodialog = 'X'.
Any ideas anyone?

I am not sure if this is the right forum for this question. Maybe: ABAP Developmnet -> Form printing [Output Management; is more proper?

Dynamic programming: send data to function module, mapping...

Hello abappers,
I have a requirement to be able to send a the name of a table and a table-field to a function module, it can be a table of any type, so the function module should be generic in nature, the function module receives the table name and table-field name and then selects data for the field specified from the table specified (in the import parameter of the FM). Within the function module, I want to be able to determine the fields type? and then send this field to an internal table representing a a destination table (also specified in the import parameters).
the idea is to be able to map a field from any table to a specified field in another table, the table(source and destination) and field names will only determined at run time as specified by the user.
any assistance will be appreciated, I am not very familiar with dynamic\generic programming.

Hello Bijo,
Following are the steps to implement this requirement:
1. Create import parameter for table name i.e. TABLE_NAME
2. Create tables parameter for fields table
3. Define table. DATA TABLE TYPE REF TO DATA. Also create single column internal table for fields and load all fields to select from database.
Inside function module you can implement following steps:
4. Load all the fields name into internal table. for this you can use DD03L for field details and use TABLE_NAME as key.
5. Once you have all the fields ready in internal table then construct fieldcatlog using these fields
loop at internal table with all the fields.
move it to field catalog.
append field catalog.
endloop.
6. Pass this field catalog table to static method create_dynamic_table
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = fieldcatalog_tab
importing
ep_table = table.
Here table is defined with data object type.
now assign table reference to field symbol of type table.
ASSIGN table->* to <field-tab>.
Also create work area <field-wa> using refrence of table.
create data object wa LIKE LINE OF <field-tab>.
ASSIGN wa->* to <field-wa>.
Also define field symbol for field name.
for e.g. <field_name>
7. Dynamic internal table is ready
    Now using can use select as follows:
    SELECT (fields) "--> fields is single column internal table to hold fields need to be selected
         INTO CORRESPONDING FIELDS OF TABLE <itab> "--> itab created dynamically at runtime
        FROM (TABLE_NAME) --> Table name imported
     WHERE (where_clause). --> where_clause is single column internal table with data type CHAR72.
Select data into <itab> and use ASSIGN COMPONENT to move data from one table to another as follows:
8. To fill this dynamic internal table using ASSIGN COMPONENT <Comp_number> OF STRUCTURE <field-wa> TO <field-name>
So in this case if first field of structure STRUCT1 is user_id then sudo-code will be
loop at internal table containing list of fields into field_wa
ASSIGN COMPONENT field_wa OF STRUCTURE <field-wa> TO <field>. "Here field_wa is wa area for single column internal table holding all the fieldnames.
Now <field-name> points to user_id field. Move some value into it as nornally we do with variables.
move '001' to <field-name>.
or
<field-name> = '001'.
endloop.
after completing all the fields one row will be ready in <field_wa>.
APPEND <field_wa> to <field_tab>.
Let me know incase you face any issues!
Hope this helps you.
Thanks,
Augustin.
Edited by: Augustarian on Aug 23, 2009 7:02 PM
Edited by: Augustarian on Aug 23, 2009 7:08 PM
Edited by: Augustarian on Aug 23, 2009 7:09 PM

Deletion of Function modules

Hi,
i am trying to delete the FM but system is not allowing me to do so it says that the object has been locked by transport request
when i had closer look it is nothing but Function group which is locked. we create all our FMs in a single Function group
so all newly FMs that were in development are included in this group and therefore i cannot delete my FM
what would be the procedure to do the deletion of FM?
Raj

Hi
you just create a Dummy Function Group ZGRP
Then --> Go to SE37
Enter your function module name
--> Menu >Function Module> Other Functions-->Reassign
(or) Press ctrl+F7
ther you can reassign the function group (i.e.you assign the newly created Dummy fuction group ) and after you can delete it with out any risks.
Hope this will help you
Thanks & Regards
Mallikharjuna Reddy

Error while passing a table to a function module

Hi Iam passing a table g_tab of length 376 flat structure to the function module..under TABLES section parameter.
Changedocument_read_headers.
iam getting a complile time error like the below displayed thing. Can u tell me how to solve this ?
In the function module interface, you can specify only
fields of a specific type and length under "I_CDHDR".
Although the currently specified field
"G_CDHDR_TAB" is the correct type, its length is incorrect.
Edited by: kiran kumar on Jul 7, 2008 8:53 AM

probably u making a mistake while declaring the table
declare it like this in the tables section:
S_JOB LIKE RNGE_OBJID
where s_job is the internal table name and RANGE_OBJID is a structure type and NOT an internal table type.

Error while generating Web Service from a function module.

Hi Experts,
I am trying to create a web service from function module by doing the steps as mentioned in the below document:
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID1146834250DB10778842957931285337End?rid=/library/uuid/80fa3dff-ce76-2a10-3f94-f3df8f2db5a2&overridelayout=true
When i save it as an local object instead of generating the Web Service it gives me the below error:
"Error during activation of Web Service"
Kindly let me know what needs to be done inorder to resolve this issue.
I have a feeling that this error may be with respect to some authorizations, in that case how do we resolve it
Helpful Inputs Awaited.!!!
Thanks
Dhwani

Hi Dhawani,
Hi Pavan,
Can you please elaborate...how this will help??
Thanks
Dhwani
I dont know the specific reason but internally there may some inconsistancy but i faced the same error and i tried with saving it in the package.
Thanks

Error while creating a extractor based on Functional Module

Hi,
I am building an extactor based on afunction module.I created a DS and created a structure in Se11.When i am trying to put the extract structure in the Tables tab of the function module it gives me an error saying Tables parameters are obselete and doesnt allow me to activate or go back and front to other tabs.Can anyone please tell me what might be the reason?
Thanks,

Hi,
Just try to reactivate the structure once again. And when you open the function module, if the problem still persists just try to press Return key several times. The message you are getting is just a warning message.
PS: I am not sure whether this is the correct way, but i personally resolved this by pressing the ENTER key 4 or 5 times. So just give a try.
Regards
Sunil

Error while creating import parameters in RFC function module

Hi,
I am trying to create import parameter in RFC enabled function module and getting the following error "Reference parameters are not allowed with RFC". Am I doing something wrong.
Your earlier response is much appreciated
Regards
Kasi

There is a "Pass by Value" checkbox, just check that and you wont get the error. The basic reason behind is since an RFC is called by a different system the parameters have to be sent as values than as references.
hith
Sunil Achyut

Error on SAPLZ001 program after deletion of Function Module

Similar Messages

Maybe you are looking for