Delivery is not confirmed in the Current date even though stock exists
Dear All,
I'm facing a peculiar problem.
I have a Sales Order with Requested Dely Date as 15.07.2010.
In today's date (14.07.2010), I have confimed the production and brought the sales order stock into the system.
When I carry an availability check again in VA02, system gives the Dely/Conf.Date as 19.07.2010
It is not taking the available sales order stock into consideration.
However, if I transfer the same stock to another sales order through MB1B with Movt Type 413E, system confirms Dely/Conf.Date as today's date (14.07.2010)
What coould be the possible reasons for the same?
Please help...
With Regards,
Nitin
hi
check, if your maaterial has a time for the procedure of goods , comming in. ( in German Wareneingangsbearbeitungszeit )
Hans
Similar Messages
-
Delivery date not confirmed on the same day even though stock available
Hi Experts - We are creating an STO in Brazil where stock is moving from 1 plant to another plant.
Current ATP situation is as follows: which shows 22 EA still available.
We are creating the STO from the plant 3004 to plant 3005.
We are confused why the system is proposing the delivery date of March 17 instead of March 14, in spite of sufficient quantity being available.
We do understand that it takes 03/17/2014 because of the upcoming weekend. But when stock is available on March 14, we would have expected this result.
These are the key configurations that I have done:
Material Master:
MRP View: Planned Delivery Time is 0
MRP Type: PD (MRP)
Checking Group: 02
Assign delivery type and checking rule config for Material Master is also done as follows:
Request your help please!
Regards
Siddharth SridharYes If Stock is available for material & still date is changing in STO creation than may be this could have happened due to time zone setting,
2 option-I would request you also go through Stock requirement List (MD04) & check where some pending order is lying & some purchase orders if yes then first block them,
Sometime it heppens if earlier for same material you would have created Sales order (qty is 20) & stock available qty is 15 & still with 15 qty you would have done PGI.& after some time your would have done migo for the same shortage material & this time 5 qty material could be adjusted in shortage order that's why if you go through md04 then you would be able to block shortage qty which is adjusted,n now date is showing deff,
hope this would help,
Thanks,
Kamlesh -
User start date can not be before the current date
I'm creating users using the Reconciliation engine. The start date attribute doesn't appear to be reconciling. I get many different types of parse errors. The closest I appear to get is when I set the Xellerate User resource object recon field to have Start date as a date field, i receive the error:
"User start date can not be before the current date.".
I'm using 9.0.1.1. And I AM trying to create a user that has a start date before todays date.Resolution was to patch to 9.0.1.1578
-
Not to show the detail records even though the mater records are existing.
Dear Oracle
I would like not to show the detail records even though the mater records are existing. Is there any block preperty I can set?
ThanksI don't know the reason why you would want to do that but if you do not want to any record in the master block in
a master-details format, then you could achieve this by setting the WHERE clause property in the block.
e.g., master block DEPT (base table DEPT) and detail block EMP (base table EMP)
table DEPT is as follow
dept_id (pk)
dept_name
table EMP is as follow
emp_id
emp_name
dept_id (fk)
then you can set the WHERE clause in the DEPT block as follows
exists (select 1 from emp a where a.dept_id = dept.dept_id)
hope this help -
HT204266 I can not log into the App Store, even though I am logged in to iTunes. ? Help please :)
I can not log into the App Store, even though I am logged in to App Store and my password is entered into the settings. This appended after I accidentally switched to the British version of iTunes and I logged out and back in to get to the US. Now, I keep getting an error message that I can not log into the App Store. I have tried updating it to the computer and restarting, but still keep getting the error message. Help please! :)
I am afraid all apps are tied to the Apple ID they are purchased with and are not transferable.
Your son have to buy those apps with his own Apple ID and start from scratch. -
Can't get attachments (of any type - pdf, doc, xls, etc) to go to recipient when forwarded email from my inbox.
Help?
TFP1Hello Ramki
DECISION_NOTE is a new element created in the standard decision task as of new releases (Note 1643764)
Once the user fills in the comments, they are saved as SOFM Objectsin DECISION_NOTE (this too is multiline element). All we have to do is bind it back to the workflow container in _ATTACH_OBJECTS.
Hi Ronen
Thanks for the suggestion.....I was thinking on the same lines too....if at all we have to change the approach, I need to keep it least disruptive .
Hi Rick
Will test the FM SO_NEW_DOCUMENT_ATT_SEND_API1 ...let me check if I can redefine SENDTASKDESCRIPTION in a delegated subtype of SELFITEM and use this API ....(if at all I can)....
For the wait step part.... the attachment is added to the mail step via the binding from the workflow...._ATTACH_OBJECTS from Workflow to _ATTACH_OBJECTS of the email task...not sure where you want me to set a wait step. Request you to please elaborate a bit more.
Thank you all for your kind inputs!
Will be back with my today's trials...
Regards,
Modak -
CI get doesn't return any data even though it exists
I just created a new CI and seems like when testing it using the CI tester via Application Designer, the "Get" method doesn't seem to function appropriately. I'm able to "find" keys appropriately but when I "get" a certain key, or try to "get" it with specific criteria, there is no data returned. It is like the Get sees the data there, but defaults everything. Is there something I need to do to have the "Get" method hydrate the record data appropriately? BTW, this is the standard "Get" method created when I defined the new CI.
I don't really know what you're describing but let me describe mine in more detail and maybe you'll understand the problem.
1) I created a new component that has one page definition-- TL_PRD_RPT_TIME. This component is strictly used for interfacing and nothing more.
2) For the component properties (use tab), the access search record is set to TL_RPTD_ELPTIME. The add search record, detail page and force search processing are empty. Under actions, only the Add and Update/Display are checked. For 3-tier execution, both component build and save are set to Default (application server).
3) I created a new component interface that uses this component and has all the standard methods checked.
4) so far I can find properly, and I can create "somewhat" properly. For create, the record seems to be inserted ok into the TL_RPTD_ELPTIME table but the response I get back from a create seems to be "empty"-- like the GET issues I'm having.
Now, knowing the above, what do I need to do to get the GET method to return the data? Thanks. -
Hello!
Could someone please help me?
I cannot connect to the iTunes store on my iPhone for some reason. I have reentered the password, shut the phone on and off a few times and have been able to connect to the iTunes store on my computer. This is a pretty big problem and I don't understand why it is happening.
Many thanks
ChrisLooks like there's a general problem across the US and UK at Apple's end. I've not been able to connect since this morning and there are loads of threads on here about the same issue.
-
In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)
== This happened ==
Every time Firefox opened
== I upgraded to Firefox 4 (beta)Firefox 3.6.* and earlier set the downloaded file's modification time to the current time. In Firefox 4.0 the behavior has been changed, if a server returns a timestamp telling when the file was last modified (Last-Modified header), it is used instead.
You can revert to the previous behaviour by using the [https://addons.mozilla.org/en-US/firefox/addon/93121/ Download Timestamp] add-on. -
In Outbound Delivery, PGI to be allowed only to the Current Date(System dt)
Dear Friends,
Kindly provide me the options to check that the PGI to be done only for the Current date ( System Date ) in Outbound Delivery.
Thanks & Regards
T.ArulvananHi,
Please ellorate your question in more detail.
Normally the system does the PGI date is the current date.You can check in Actual Goods Movement Date.
Thanks & Regards,
Hemant Patil -
I would like to format cells with time only. when I enter a time of day the current date is still in the cell which is not necessarily so. THere are no options for just date .
christine275 wrote:
... (this is a time worked by date and not always entered on the date worked)--
"Time" in Numbers is always "Time of Day", and is always part of a Date and Time value. "Amount of Time" is a Duration value, which may be displayed in a similar format to "Time of Day," but is a different type of value.
If you are entering the number of hours and minutes worked, format the column as Duration, set the units and the format in which you want to have the value appear.
The Date column will still contain a Date and Time value (Jan 1, 2011 00:00:00 in the cell shown in the example), but the "Time Worked" cells will contain only a Duration value.
Incidently, the Date in A2 was entered as "jan 1" (without the quotes). Numbers automatically adds the current year and the default time value, then displays the result in the closest format to what you've entered, or in the Date and Time format you have chosen.
The Duration value in B2 was entered as 3:15 (as displayed). Note that in the entry bar the duration is displayed as 3h 15m, probably to distinguish it from a similarly formatted (Date and) Time value.
Regards,
Barry -
Goods Receipt in the Current Date however Goods Issue in the previous date.
Dear Experts,
I am doing a GR through MB1C (Movement Type 561) in the Current Date (Both Posting and Document Date are current) for a Particular batch of Material. However when I am trying to create a sales order->Delivery and PGI in the past date the system is allowing me to do so. What could be the issue ?
Example : On 23-02-2010 Goods Receipt of Material "A" for 50 Tons for Batch "B100" done through MB1C Movement Type 561.
Stock in System as on Date 23-02-2010 in MMBE is showing 50 Tons of Material "A", Batch "B100".
A Sales Order is created for 22-02-2010 for the same Matrial, qty, batch and PGI is done on 22-02-2010.Hi,
Issue is that previous period is not closed that is why system allow to create delivery in back date.
Kapil -
Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
May 14 2014 18:34:29
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu -
FI line items up to the current date
Hi all,
I read the SAP note 485958 "BCT-FI:Extracting FI line items up to the current date" and I have some doubts here:
1. After I've set parameter BWFIOVERLA to 'X' and extract delta at 6PM, will FI data that is changed before 6PM for example a gl entry at 5PM, goes into my delta extraction?
2. What does BWFITIMBOR mean by having default value 02:00:00?
3. Is this note applicable if my R3 PI release is at 2003_1_46C?
Please advise.
Thank you.
CelesteHi Celeste,
Pls go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/content.htm
Excerpts from this link regarding your doubt:
BWFIOVERLA: The logic of this parameter prevents records with the previous day as their CPU date from still being in the update at the time of extraction.
If X is set for this parameter, selection is made up to the previous day if the time limit is not reached.
If <space> is set for this parameter, selection is made up to the day before the previous day if the time limit is not reached.
BWFITIMBOR: This parameter designates 02.00 (2 A.M.) as the time limit for extraction. If this limit is not reached, the system uses a security interval of one day to determine the To-value of the selection. If extraction is started before 02:00 therefore, the selection takes place only up to the day before the extraction run.
Hope it helps you!!!!
Regards,
Amit -
Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
How to remove credit card from iTunes
Because can't get no apps cause of the credit card information
-
Autocomplete no longer working on my iOS devices even though it works on my MacBook Air
I migrated all of my settings and info to a new macbook air from an older macbook air a few days ago. Now the mail "to" field only autocompletes addresses on the Air, but it no longer works on my iPad or iPhone. When I open the address book on the
-
I was just wandering if there was any way of deleting your purchase history as I have moved from my dads account to my own and I don't really want him to see the things I've been downloading.
-
Applet jerks when moving a window over it
Hi together ! I'm programming an applet at the moment. In that I move many pictures from up to down so an turning effect comes up. I have realised this with the grapics objekt from Java and the Graphics.drawImage() methode. I begin to draw the pictur
-
Supressing Tab selection screen on selection screen ....
Hello Gurus, I have following program. I want to make the Tab screen on selection screen inivisible when ceratin condition is set in configuration table. I know that I have to do it in AT SELECTION-SCREEN OUTPUT using loop - endloop. But how can I do