Delivery date not confirmed on the same day even though stock available

    Hi Experts - We are creating an STO in Brazil where stock is moving from 1 plant to another plant.
    Current ATP situation is as follows: which shows 22 EA still available.
We are creating the STO from the plant 3004 to plant 3005.
We are confused why the system is proposing the delivery date of March 17 instead of March 14, in spite of sufficient quantity being available.
We do understand that it takes 03/17/2014 because of the upcoming weekend. But when stock is available on March 14, we would have expected this result.
These are the key configurations that I have done:
Material Master:
MRP View: Planned Delivery Time is 0
MRP Type: PD (MRP)
Checking Group: 02
Assign delivery type and checking rule config for Material Master is also done as follows:
Request your help please!
Regards
Siddharth Sridhar

Yes If Stock is available for material & still date is changing in STO creation than may be this could have happened due to time zone setting,
2 option-I would request you   also go through Stock requirement List (MD04) & check where some pending order is lying & some purchase orders if yes then first block them,
Sometime it heppens if earlier for same material you would have created Sales order (qty is 20) & stock available qty is 15 & still with 15 qty you would have done PGI.& after some time your would have done migo for the same shortage material & this time 5 qty material could be adjusted in shortage order that's why if you go through md04 then you would be able to block shortage qty which  is adjusted,n now date is showing deff,
hope this would help,
Thanks,
Kamlesh

Similar Messages

  • I have an iphone 4 and it's not working, if i pay can apple replace it with the same model even though it's no longer for sale?

    I have an iphone 4 and it's not working, if i pay can apple replace it with the same model even though it's no longer for sale?

    If the iPhone has not been opened or serviced by other than Apple
    or authoriized service provider (there are a few other requirements),
    you should be eligible for out of warranty replacemement for $149 US.
    Apple maintains sufficient stock for replacements even for iPhones that
    are no longer available for purchase. You may be better off upgrading to
    a newer version than paying $149 to stay with the iPhone 4.
    What is no longer working? If you provide more details as to the problem
    and what troubleshooting steps you have taken, some one may offer
    a solution.

  • Not to show the detail records even though the mater records are existing.

    Dear Oracle
    I would like not to show the detail records even though the mater records are existing. Is there any block preperty I can set?
    Thanks

    I don't know the reason why you would want to do that but if you do not want to any record in the master block in
    a master-details format, then you could achieve this by setting the WHERE clause property in the block.
    e.g., master block DEPT (base table DEPT) and detail block EMP (base table EMP)
    table DEPT is as follow
    dept_id (pk)
    dept_name
    table EMP is as follow
    emp_id
    emp_name
    dept_id (fk)
    then you can set the WHERE clause in the DEPT block as follows
    exists (select 1 from emp a where a.dept_id = dept.dept_id)
    hope this help

  • Why do my 2 iphones ring at the same time even though they have different numbers?

    Why do my 2 iphones ring at the same time even though they have different numbers?

    Are they sharing an Apple ID?
    On both phones:
    Settings > FaceTime > turn iPhone Cellular Calls off

  • HT204266 I can not log into the App Store, even though I am logged in to iTunes. ? Help please :)

    I can not log into the App Store, even though I am logged in to App Store and my password is entered into the settings. This appended after I accidentally switched to the British version of iTunes and I logged out and back in to get to the US. Now, I keep getting an error message that I can not log into the App Store. I have tried updating it to the computer and restarting, but still keep getting the error message. Help please! :)

    I am afraid all apps are tied to the Apple ID they are purchased with and are not transferable.
    Your son have to buy those apps with his own Apple ID and start from scratch.

  • When playing music on my iPhone 4S, it keeps repeating the same song, even though it is set at Shuffle.

    When playing music on my iPhone 4S, it keeps repeating the same song, even though it is set at Shuffle.

    Make sure you don't have Repeat turned on.  While the song is playing, tap the screen (cover art) if necessary to bring up the extended music controls (see image below).  Then tap the Repeat button until it turns white (which is off).

  • Limiting the time when Sales Orders can be confirmed on the same day

    Hello Gurus. The business has a requirement where they want to limit the time of the day when they can confirm sales orders on the same day.
    So, when they receive a sales order, they want that if the order is received after a certain time (e.g. 14:00) then it cannot be confirmed for that same day, it can only be confirmed the next day.
    How can I implement this limitation?

    Fernando,
    Let me restate your requirement so that I understand your question: 
    A Sales order is created 'today' with a requested delivery date of 'today'.
    There exists adequate material in Stock to confirm the order.
    You want the confirmed date to be 'some-amount-of-time-later-than-now"
    (say 18 hours or so)
    Which confirmed date in the sales order are you talking about?
    Confirmed Material Availability date?
    Confirmed Loading date?
    Confirmed Transportation planning date?
    Confirmed Goods Issue date?
    Confirmed Delivery Date?
    Many people with this requirement use 'delivery scheduling', and add a half day or so in pick/pack processing time.  This means that you are recognizing that it takes a bit of time to create the delivery notice, print the shipping papers, pick and pack the parts, and get them ready for the carrier to ship.  So, for an order entered 'now', it wouldn't be due to ship from your warehouse until 'a half day from now'.
    To enable Delivery scheduling  IMG>SD>Basic Functions>Delivery scheduling and transportation scheduling>Define scheduling by sales document type. Select the relevant ordertypes, tick delivery scheduling.
    If this is already selected, then you can increase the pick/pack processing time of the shipping point in IMG transaction OVLZ.  It can be set to a fraction of a day (2 decimal points).
    Regards,
    DB49

  • Requested delivery date is by default the next day

    Hi Friends,
    In all my sales order I want to make requested delivery date to the same day as the order is made. currently it is giving the next day.
    For example if I make order on 06/01/2011 then system should give requested delivery date as 06/01/2011.
    how can I achieve this.
    Regards,
    Wasim.

    Hi Lakshmi,
    The tick for propose delivery date is there for all the document type. This problem was not there till yesterday, but since today it has started.
    It is not happening for ane particular company code. its happening for all 7 company code defined in the system.
    What could be the problem and the possible solution.
    Regards,
    Wasim.

  • Disable roaming data not works (in the same country)

    iPhone 2.1
    if disable roaming data and your carrier allows to connect to another carrier in the same country (for voice services) your iPhone continue to connect with the other carrier, even if you've disabled roaming data.
    that needs to be fixed as soon as possible ...
    i've spent a lot of money thinking that disable roaming data works also in the same country and not only abroad

    They should then add this features, a lot of people are in the same boat ... and receive tremendous bill due to this lack of capabilities of iPhone to do not lock data connection only with the own carrier in the same country.
    I know that there's the possibility to use only one carrier instead of setup in automatic mode the carrier, but, as said, many carriers all over the worls allow theis customers to connect to other carriers for free ONLY for voice BUT not for data ...

  • Delivery is not confirmed in the Current date even though stock exists

    Dear All,
    I'm facing a peculiar problem.
    I have a Sales Order with Requested Dely Date as 15.07.2010.
    In today's date (14.07.2010), I have confimed the production and brought the sales order stock into the system.
    When I carry an availability check again in VA02, system gives the Dely/Conf.Date as 19.07.2010
    It is not taking the available sales order stock into consideration.
    However, if I transfer the same stock to another sales order through MB1B with Movt Type 413E, system confirms Dely/Conf.Date as today's date (14.07.2010)
    What coould be the possible reasons for the same?
    Please help...
    With Regards,
    Nitin

    hi
    check, if your maaterial has a time for the procedure of goods , comming in.  ( in German Wareneingangsbearbeitungszeit )
    Hans

  • Actual delivery Date not coming in the extractor 2LIS_11_V_SSL

    Hi
    I am trying to get the Confirmed and Actual Delivery date for a Order from ECC in BIW. The extractor 2LIS_11_V_SSL has both these fields. But when I check the data in the extract checker (RSA3) in ECC, I always get the Actual Delivery Time as Blank.
    Is there any problem with the standard extractor? Or anything needs to be done to get this field from ECC.
    The BI Content Version in ECC is 703 SP 4.
    Actually I want to know whether the Order is delivered on Time or not, Is there any way like status which can tell me if the Order is "Delivered on Time" or not
    TIA
    Abhishek

    Yes we were using the field MCEX_I_LFDAT Actual Delivery Date. It only gets filled for confirmed deliveries and is blank for other orders.
    Though the values were not tallying with what the Functional Team wanted. So now we are using the field MCEX_I_WADAT (Acttual Good Issue Date) from the source system. We are still using the extract 2LIS_11_V_SSL for the same. This field is filled from the Deliveries from the Source System.
    Both the Extracts 2LIS_12_VCHDR, 2LIS_12_VCITM also have Actual Goods Issue (GI) Date and no Actual Delivery Date. Though these come from different fileds in different tables.
    Closing the Post.
    Thanks
    Abhishek

  • Data not adding for the same Key up in Infocube

    Hi,
    My Dataflow goes like this:  Datasource  -> DSO -> Infocube.
    I have created 2 DSO's for Deliveries Header & Delivery Item Seperately which gets data from 2LIS_11_VCHDR & 2LIS_11_VCITM Datasources.  Both DSO's have Delivery Number & Fiscal Year variant as Key.  20 records are getting loaded to each DSO's seperately.  Both the DSO's have the same Delivery Numbers & Fiscal year Variant for this 21 Records in their respective Loads as given below:
                                     DSO 1                                                                  DSO 2
    S.No.       Deliver No.    Fiscal Year Var.                          Delivery No.       Fiscal Year Var.
       1               12345                     V3                                          12345                         V3
       2               28456                      V3                                          28456                        V3
       3               34986                      V3                                          34986                        V3
    Now, I am loading data from this 2 DSO's to one Infocube, Deliveries Infocube.  The problem is, after the Data load, when i go to the Contents of the Infocube, I could see 42 records.  As per Infocube, it should add up the values for the same key.  My Delivery numbers & Fiscal year vairant are the same in both the DSO's, so i should have got only 21 records.  Why is the Infocube not adding up the records in this case, am i missing anything here?
    Thanks & Regards,
    Murali

    Hi Murali,
    As you are loading data from two different sources, there are two different requests and that is why you are getting 42 records, if you want to check the data consistency then create a query on top of this infocube and then check the values of key figures for delivery no's. or verify your data through query.
    If you don't want to create query then you can use aggregation option from the display data of Infocube.
    If you compress both the requests then you will see only 21 records in infocube.
    Regards,
    Durgesh.

  • Statistical Delivery Date not apperaing in the Purchase Order

    Hi Gurus,
    Recently the statistical delivery date(SDD) in the Purchse order has stopped appearing in the PO.
    Earlier it was appearing but since last one month it has stopped appearing.
    The field remains blank inspite of sending the message to the vendor & changing the delivery date of the line item.
    Is there any Config setting which i am missing.
    or is there any SAP Note to be applied.
    Thank you
    NS

    did you change something in your system and process?
    using BAPI or userexits, modified standard program?

  • Rush order :-Even though stock available  Sytem is not ablet   to confirm

    Hi all,
    In case of Rush order- insipite of  stock available in the system  its not able to confirm the quantities .
    Immediate delivery is not happening because of this
    Please let me what might be the reason?
    Regards
    Anil

    Hi anil maripady
    As you are doing rush order , first of all go to VOV8 and check the following things in  rush order document type :
    1) Shipping Conditions - immediate
    2) Immediate Delivery - [X}
    3) Lead time in days - NIL
    Now go to  MD03 and check how much  stock is available of that material and how many open orders are also there with that material in that plant
    Another option go to MMBE and check how much stock is there for that material in that plant and storage location
    Regards
    Srinath

  • In Firefox 5, New Windows open in the same window even though the options are set to open in a new window.

    I have the options set to open new windows in a new tab. However, they do not.
    For example, as I click on the various options for support on Firefox.com, each opens in the same window. Similarly for Yahoo. If I bring up the news page and click on various links, they all open in the same window. How do you get them to open in new windows?

    Pure speculation, but maybe that Identity Finder program is deleting your browsing history which is how Firefox restores tabs and windows from the previous session. Check with technical support for that program or look at the manual.

Maybe you are looking for