Dep rates for all assets as per companies act

Hi experts
i want to know depreci rates for all types of asset as per companies act
thanks
get points
Geeta

http://www.mca.gov.in/MinistryWebsite/dca/actsbills/pdf/Companies_Act_1956_Part_2.pdf

Similar Messages

Can not run AFAR for all assets

We have recently migrated and yet to post first month depreciation. We have changed the depreciation key in one of the depreciation areas due to some requirements. Now if I want to recalculate the planned values for all assets in that asset class/depreciation area system is not allowing. The background job says not allowed in production system. It is allowing to do asset wise.

That's too bad.
Polling is not permitted here per the terms of use.
A simple search of the forums would reveal if others are having problems.
If help is truly desired, try providing some details of the problem that is occurring.

How to change the UWL refresh rate for all portal users.

Hi Portal Experts,
How to change the UWL refresh rate for all portal users?
Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
It was defaultically set to 5 mins for all users.How to change this to 20 mins.
Thanks
Sony.

1.      Launch the UWL iView configuration page.
You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
      From the Universal Worklist Systems, choose the system for which you want to edit the properties.
    Choose Edit.
may be you can get clear help from below help file
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
regards
nagaraju

FTXP - Tax Maintaining issue - Updating tax rate for all Jurisdictions

Hi Experts,
Whenever i am trying to maintain a tax code for a perticular jurisdiction, whatever changes i make in the tax rate of the tax type are getting reflected in all other jurisdiciton as well instead of the one for which i am doing the changes. There is no custom dev. under this tax maintaining part and its a config issue as i am not able to replicate the same issue in the production system . After a lot of debugging of FTXP I did not get anything. Can anyone please help me out in this issue ?
Regards,
Rahul.

Hi,
I would just like to clarify.
I try to post say using a tax code W1. However, I am prompted an error because my tax rate has not been maintained.
I maintain the tax rate in FTXP, system prompts me that changes have been saved. When I go back to see the tax rate is not there anymore in FTXP. It is not visible.
I maintained FV11 and I am able to post already. But in FTXP, I am still not able to maintain the tax rate.
I am posting via FB70.
Anyone can clarify why this is? And how can fix the fact that tax rate is not visible in FTXP?
Thanks,
Josef

Bit rate for all computer?

Hi all,
I'm burning a DVD in DVDSP 4, I burned and tried it in my MacBook Pro and on normal DVD player and It works perfect, the problem comes when I play it on some not so new PCs, in one of them the buttons (text and silver frame) in the menu seem to repeat in different positions, and in the other computer it plays fine but the audio doesn't work and sounds kind of static... does it have something to do with the encoding bit rate in DVDSP? maybe in Compressor??
HDV material / compressed with DVD best 90
SD DVD/PAL
Bit rate in DVDSP 5.0 Mbps
Max Bit rate 6.2
Appreciate your help!
Javier

Which Windows program was used to play the DVDs? Hopefully not Windows Media Player.
-DH

Companies Act 2013 Applicability from 01/04/2014 for Assets

I have written everything in screen shot. Screenshot contains my questions. please if others are dealing with same problem please share your views.
Asset acq cost 839798. First year dep for 224 days, Till 2013 dep rate 25.89. dep till 2013 and from 2014 dep rate 31.54 applied as per comp act rules.
Scrap value 5% of 839798 as 41989.90. If we apply 31.54% asset stops dep after uselful life is over yet wdv is above scrap value.
What I am suggesting is that during first year of applicability of act i.e. 2014 extra positive or negative depreciation (over and above dep key rates) should be charged so that in rest of asset's life depreciation rates apply smoothly as if act was applicable from start of purchase of asset.
like in this example
After this for all assets (using same dep. key) will depreciate to correct scrap value. This is just a suggestion. If any other option is available please suggest.,

Hi Rajesh,
Refer my suggestion in the following link
WDV Depreciation for remaining life
Useful life for your example 5.28% is 18 years and 11 months(100/5.28).
Hope it solves.
Regards,
G.Sethuraman

Depreciation as per IT act India problem in asset acquisition for less then 180 days.

Dear All,
As requested by our client we need to configure depreciation as per IT act.We are using fiscal year variant K4(Oct to Sept) in our company code but as per specification from client we need to use fiscal year variant (April to March) for reporting purpose as per IT act.While posting for asset acquire for less then 180 days asset is not coming in display as per Indian Income tax report(J1IDISPBLK - Display Transaction Details at Asset Level).
We also try to use V3 (fiscal year variant as maintained for Indian IT act with period control "IT").But while putting V3(Fsv) for Depreciation area 15 (Financial Accounting (New) > Asset Accounting > Valuation > Fiscal Year > Fiscal Year Variants) got error that Fiscal year should be same as of company code.In this case we are not able to configure it.Kindly advice if anybody has configured this.

Hi Sudheer,
This 180 days calculation can be done for Income tax depreciation if you provide the below details in the income tax related depreciation key
Base method: IND1
Declining Balance method: I01 to .... (whatever is available in F4 option based on rates you select)
Period control: IN1
Multi level method: M1 to M9 as provided by standard SAP
Class: 2 Declining balance depreciation
Change method: No automatic changeover
Multiple shift: 2 no effect on depreciation and useful life
Scrap value: 3 cut off value is ignored
shutdown: No
If you follow the above details in the depreciation key, then you will get that 180 days calculation. ie., from 1st april to 30th september if you capitalise any asset, your system will calculate full depreciation and from 1st october to 31st march if you capitalise any asset, you system will calculate 180 days depreciation.
Hope this helps. Assign points if useful
Regards
Dwarak

Need for Group asset

Hi Experts
Any body guide me about group assets we have Building, Plant and machinery,vehicles,computer,furniture&fittings
I need to configure seperate asset class for each asset or I can maintain same asset class for all assets
please guide me,
Regards,
Vani

Hello,
As a general rule, the system calculates depreciation at the level of individual assets. Certain types of calculation needs or tax requirements (such as in the U.S.A.) make it necessary, however, to calculate depreciation at a higher level. For this purpose, you can group assets in the FI-AA system together into so-called group assets. You can group assets together per depreciation area to form group assets.
Definition: group asset
Asset Accounting (FI-AA)
A combination of a number of assets for the purposes of a common, summarized calculation of depreciation.
A group asset is represented in the SAP System by a separate master
record.
So it is up to your requirement weather you want to go with Group Asset or not.
But the rate of Depreciation is different for asset classes so it is better not to go with Group Asset.
Regards
Ravi

Depreciation Posting for Single Assets

Dear All,
We are in ECC5.
We are trying to Run Depreciation (AFAB) for Single Assets by giving Assets Number.But it is not Executing.
Can U Pls help us Regarding this.
Thanks & Regards,
Pankaj

Hello
As per the standard sap functionality you can run the depreciation for all assets, if u want correct the old one, using repeat run or reposting run.
I hope it will be suffice ur requirement
Regards
Madhav

Split invoice due to exchange rate for letter-of-credit

Hi Guru,
Orginially, I was trying to create a combined invoice and the the split msg appears. After some checking, so I update the exchange rate for all S.O. remove the Letter of credit, save, reapply the letter of credit to S.O.. and the error msg still appears. So I then try to create invoice per S.O. and found that split were due to the letter of credit rate diff within the S.O.
e.g.
S.O. 12345 , exchange rate 1.5
S.O. 23456, exhcange rate 2.0
1. I update S.O. 12345 to exchange rate 2.0.
2. try to create invoice, msg appears.
3. check table VBKD and found that the whold order exchange rate = 2.0 but for a few line item, the letter of credit exchange rate still = 1.5
Can anyone recommed how I can update the letter of credit rate ?
Thanks & Regards,
Rebella

Thanks. I guess i didnt explain my problem clearly. we create invoice using sales order not delivery note. We have a TPO process, we create SO, Vendor PO, and Vendor ship good directly to customer. We GR against PO, then bill using SO#.
Hopes it is clear enough for more help.
thanks.
Rebella.

Register brand based metadata for DAM assets

Hi,
     I am trying to create new metadata property for DAM assets specific to our application. I follow the procedure stated in the below link.
     http://dev.day.com/docs/en/cq/current/dam/how_to_edit_metadata.html#Creating%20New%20Metad ata%20Property%20for%20Assets
     But the procedure talks about adding metadata which will become applicable for all assets. Hence, double clicking on any DAM image will show all metadata added as above.
     But as per our requirement, the metadata set must be different for different brands (different folders) inside the same dam. So, when clicking on a image in folder1, the metadata edit page should show metadata specific to that folder1 and when image in folder2 is clicked, the metadata edit page should show metadata specific to folder2.
     Any pointers to achieve this will be very helpful. Thanks in advance.

Just a guess but you might have to change /libs/cq/ui/widgets/source/widgets/wcm/DamAdmin.Actions.js and then replace
var json = CQ.HTTP.eval("/libs/dam/content/asseteditors/asseteditor.overlay.infinity.json" + suffix);
            if (!json.formItems) {
                json.formItems = CQ.HTTP.eval("/libs/dam/content/asseteditors/formitems.overlay.infinity.json" + suffix);
With your own servlet JSON response based on current path and then render mentadata you want to render.
If your requirnment is just persisting certain metadata based on current path and not edit it from UI, then change DAM Update Asset workflow and add additonal step after metadata extraction to do this.
Yogesh
www.wemblog.com

BPC 7.5: FX rate for opening balance from different category

Hi,
I have three categories in my system, ACTUAL, ESTIMATE and BUDGET. When we submit ACTUAL data, we also submit a forecast for the year end period (DEC in our case). We also have currency rates for FORECAST for the DEC period.
We are now working on the budget and the opening balances (business rule) are coming from the forecast since we obviously do not yet have actuals.
This copying works fine (CATEGORY_FOR_OPE on BUDGET is set to FORECAST).
However, when we run a currency conversion, we have a problem. The opening balances are set to convert at the previous year end rate which is fine. But the system uses the BUDGET category rates whereas we want it to use the FORECAST rates. But only for the opening balances, all other flows should be converted using the BUDGET rates.
Is it possible when using the currency conversion business rule, to use the FORECAST rates from the previous year end for opening flows but BUDGET rates for all other flows?
Thanks,
Arnold

Hi Arnold,
Yes this can be done.
Basically in your FX business rule table you need to have your opening flow/acctdet to use the formula [AS_IS]. This will take the group currency value from the previous period (in your case the last period of year -1 in the FORECAST category) and enter that value in the group currency field in the current year for BUDGET.
Note - If you are doing detailed balance sheet planning and you need it to always to balance to 0, then you will also need to put a line in your business rule to take [END]-[AS_IS] to the currency translation reserve. Otherwise this [AS_IS] value in GC will mean your GC balance sheet will be out of balance.
Hope this solves your issue.
Tom.

I don't want to have to ZOOM every site i visit, how do i save my zoom setting for all sites?

i don't want to have to ZOOM every site i visit, how do i save my zoom setting for all sites?

''how do i save my zoom setting for all sites? not for each site I visit''
That would be be impossible unless you did away entirely with page formatting entirely. Each author may have their own idea of what you should be seeing and how you are to see it. By site which is the default is about the best that you can do.
If you have a serious problem you could change the resolution of your display, but it had better be a very large monitor.
'''NoSquint''', adjust the text-only and full-page (both text and images) zoom levels as well as color settings both globally (for all sites) and per site. Toolbar buttons, percent displays on status bar.
* https://addons.mozilla.org/firefox/addon/2592
'''Zoom text of web pages'''
* http://kb.mozillazine.org/Zoom_text_of_web_pages
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Bit Rate for Mixed angle DVD

What bit rate will give an decent quality image if there are 4 video streams (v1-edited video,v2-4 source angles), 1 ac-3 audio stream, 1 mpeg1 audio stream. Three of the video streams are alternate angles that popup for brief ( 1 to 5 minutes ) periods of time in a 1 hour wedding ceremony. I guest the safe bit rate for all streams is around 8.5, the manuals say the max is 10.3 mbps. Can I mix bitrates for video in a mixed-angle track or do they all need to be the same?, is four video tracks just too much info ?
Thanks for all the help !

One last question; if there are four user selectable streams are you adding up the bitrate for all streams or is the total just the stream that's being played plus any audio that gives you your total ?
thanks

Using ABUMN for depreciated asset,, possible?

Hi Gurus,
I need to do a assets class transfer, for eg: Computer Software to Intangible Assets. Currently I already close off my fixed assets till 31Jul09, that mean I had posted Jul09 depreciation, so when I do this transfer, can I back date the posting date, asset value date to 31Mar09 ? Of cos, I will need to open the period for Mar09, in order to do this transaction, but is it the correct way to do it? My doubt is I already completed depreciation till Jul09, am I allow to back date it again to 31Mar09 for the transfer? Please advice
Thanks

Hi,
The test here is till what date do you want to charge depreciation for the computer? And from what date do you want to consider the asset as an intangible asset?
You can post with posting date in Aug 09 but provide asset value date as 31 Mar 2009. The extra depreciation on the computer (Apr to July) will be reversed in the month of Aug when you execute the Aug depreciaton posting. In addition the system will also pass the depreciation from Apr to July on the new intangible asset if you have maintained depreciation rates for this asset in Aug.
Rgds
Shivram.

Dep rates for all assets as per companies act

Similar Messages

Maybe you are looking for