"Dependent component 368A93BD-833B-11d3-9E98-00105AE811B7:1 was not registered" message appears after installation

After I finished installing the iPlanet Calendar Server 2.1 using the installer,
the following message appeared in the console window: 

dependent component 368A93BD-833B-11d3-9E98-00105AE811B7:1 was not registered.

What does this mean?

It appears that the installation of Calendar Server completed successfully.
The message above will not affect you and can be ignored.

Richard,
I have just applied patch to upgrade from Portal 3.0.9 to 3.0.9.8.1 (Patch applied to loginserver and portal schema) and the External Applications that were previously set up have gone from the portlet.
Does this relate to your note at the bottom:
"Minor issues with Bulk action. 1840420 CUSTOM WRITTEN EXTERNAL AUTH MODULE NEED TO BE UPDATED AFTER 3.0.9 UPGRADE SSOXOID.PKB DOESN'T LOAD.
External authentication modules that were written before 3.0.9 need to be updated after upgrading to 3.0.9. ssoauthx.pks is updated in 3.0.9 and contains additional routines that need to be implemented." ??
If I go to the "Login Server Administration" portlet and select the link "Administer External Applications" I get a list of 5 External Applications that have previously been set up.
If I go back to the Home Page and select "customize" on the "External Applications" portlet I get the message "Your Login Server administrator has not registered any external applications".
Does that mean I should just run 'ssoauthx.pks' & 'ssoxoid.pkb' or do I need to do something else ??
Thanks
Simo

Similar Messages

Today, I got a "update iTunes and tonight, I can't access my iTunes. I uninstalled and reinstalled and the error message reads: iTunesexe-unable to locate component. App has failed to start due to MSVCR80.dll was not found: Reinstall may fix" but hasn't.

I received an iTunes update today and updates files. Tonight, I couldn't acces my iTunes. I uninstalled and reinstalled and still getting same error message: iTunes exe unable to locate component. This application has failed to start because MSVCR80.DLL was not found. Reinstalling the application may fix this problem. I've done it several times and still get the error. I'm fearful I have lost all my music. What can I do?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe-Unable to locate component - "this application has failed to start because CoreFoundation .dll was not found," Reinstalling did not fix problem.

Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe - Unable to Locate Component -
"This application has failed to start because CoreFoundation.dll was not found. Re-installing the application may fix this problem.
I uninstalled and re-installed itunes and the message still appears.
How do I fix this??
Thank you

With that one, first try uninstalling and reinstalling your MobileMe Control Panel for Windows, robin. Does that make the error go away?

Error 1046: Type was not found or was not a compile-time constant: Component Event.

Hi Everyone..
I am getting an Error 1046: Type was not found or was not a compile-time constant: Component Event.
The ComponentEvent class has been imported,and also the event handling code is there. I am not sure what else is wrong, hope somebody can advise me. Thanks. The code is below, the point where the error occurs as indicated by the compiler has been highlighted.
package
import flash.display.Sprite;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
import fl.controls.TextArea;
import fl.controls.Button;
import fl.controls.TextInput;
import flash.events.SyncEvent;
import flash.events.MouseEvent;
import flash.events.FocusEvent;
import flash.net.SharedObject;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.events.FocusEvent;
import flash.events.ComponentEvent;
public class VideoChat extends Sprite
private var button:Button;
private var text_so:SharedObject;
private var textArea:TextArea;
private var textInput:TextInput;
private var chatName:TextInput;
private var nc:NetConnection;
private var nsOut:NetStream;
private var nsIn:NetStream;
private var rtmpNow:String;
private var msg:Boolean;
private var cam:Camera;
private var mic:Microphone;
private var vid:Video;
public function VideoChat ()
 //Set up UI
 textArea = new TextArea();
 textArea.setSize(500,280);
 textArea.move(20,54);
 addChild(textArea);
 textInput = new TextInput();
 textInput.setSize(500,24);
 textInput.move(20,340);
 textInput.addEventListener(ComponentEvent.ENTER,checkKey);
 addChild(textInput);
 button = new Button();
 button.width=50;
 button.label="Send";
 button.move(20,370);
 button.addEventListener(MouseEvent.CLICK, sendMsg);
 addChild(button);
 chatName = new TextInput;
 chatName.setSize (100,24);
 chatName.move (80,370);
 chatName.text="<Enter Name>";
 chatName.addEventListener (FocusEvent.FOCUS_IN, cleanName);
 addChild(chatName);
 //Connect
 rtmpNow="rtmp:/VideoChat ";
 nc=new NetConnection;
 nc.connect (rtmpNow);
 nc.addEventListener(NetStatusEvent.NET_STATUS,doSO);
 cam = Camera.getCamera();
 mic=Microphone.getMicrophone();
 //Camera Settings
 cam.setKeyFrameInterval(15);
 cam.setMode (240, 180, 15, false);
 cam.setMotionLevel(35,3000);
 cam.setQuality(40000 / 8,0);
 //Microphone Settings
 mic.gain = 85;
 mic.rate=11;
 mic.setSilenceLevel (25,1000);
 mic.setUseEchoSuppression (true);
 //Video Setup
 vid=new Video(cam.width, cam.height);
 addChild (vid);
 vid.x=10, vid.y=20;
 //Attach local video and camera
 vid.attachCamera(cam);
private function doSO(e:NetStatusEvent):void
 good=e.info.code == "NetConnection.Connect.Success";
 if(good)
 //Set up shared object
 text_so=SharedObject.getRemote("test", nc.uri, false);
 text_so.connect (nc);
 text_so.addEventListener(SyncEvent.SYNC, checkSO);
private function checkSO(e:SyncEvent):void
 for (var chung:uint; change<e.changeList.length; chng++)
 switch(e.chageList[chng].code)
 case "clear":
 break;
 case "success":
 break;
 case "change":
 textArea.appendText (text_so.data.msg + "\n");
 break;
private function cleanName(e:FocusEvent): void
 chatName.text="";
private function sendMsg(e:MouseEvent):void
 noName=(chatName.text=="<Enter Name>" || chatName.text=="");
 if (noName)
 textArea.appendText("You must enter your name \n");
 else
 text_so.setProperty("msg", chatName.text +": " + textInput.text);
 textArea.appendText (chatName.text +": "+textInput.text +"\n");
 textInput.text="";
private function checkKey (e:ComponentEvent):void
 noName=(chatName.text=="<Enter Name>" || chatName.text=="");
 if (noName)
 textArea.appendText("You must enter your name \n");
 else
 text_so.setProperty("msg", chatName.text +": " + textInput.text);
 textArea.appendText (chatName.text +": "+textInput.text +"\n");
 textInput.text="";
//Create NetStream instances
private function checkConnect (e:NetStatusEvent):void
 msg=e.info.code == "NetConnection.Connect.Success";
 if(msg)
 nsOut=new NetStream(nc);
 nsIn=new NetStream(nc);
 //NetStream
 nsOut.attachAudio(mic);
 nsOut.attachCamera(cam);
 nsOut.publish("camstream");
 nsIn.play("camstream");

Hi Guys...
I have found out what is wrong. I was importing the wrong package the correct one should have been:
import fl.events.ComponentEvent;
instead of
import flash.events.ComponentEvent;
I hope this is helpful for anyone caught in a simillar situation as me...Thanks..

HT1926 Have the same problem as many other users: tried to update iTunes on Windows 7 today; first message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 1

I have the same problem as many other users: updated iTunes on Windows 7 on Jan 26, 2014 and iTunes does not open. First message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 126)". When will Apple fix this? Don’t feel like uninstalling all Apple software and then re-installing it as suggested, as I am on a terribly slow internet connection while travelling in the DR Congo.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

TS1717 Can't open iTunes, keeps getting this error "iTunes.exe - Unable to locate component. This application has failed to start because MSVCR80,dll was not found"

Can't open iTunes, keeps getting this error "iTunes.exe - Unable to locate component. This application has failed to start because MSVCR80,dll was not found"

Solving MSVCR80 issue and Windows iTunes install issues.

After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?

After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?

I hope it doesn't effect how I down load my itunes to my ipod and iphone.
No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.)

JSF RI 1.1_01: UIInput component value was not set during render response

I've just started to learn JSF, read corresponding chapters in J2EE guide and spec and tried to play little bit with JSF RI 1.1_01. I found very strange (at least for me) behaviour of regular input component (corresponds to inputText tag).
I have very simple example form (contains "select one", input component and command button). Corresponding backing bean has request scope. I set breakpoints in backing bean getters and during debug found:
1. On initial request both getters were called during rendering phase.
2. On form submit request getter for property bound to input component was called again (this looks strange for me) but getter for property bound to select box was not called (it looks as I've expected). This strange call occurs during validation phase. As far as I understand it was the following flow:
a) During initial request rendering response input box value wwas not stored in component state (I even may suggest that it was not set on component, just corresponding HTML tag with initial value was rendered).
b) On submit form submitted string value of input component was decoded from request parameters but local value was set to null (see above).
c) During validation phase submitted value was successfully converted and validated.
d) Then implementation had to detect component value change and called getValue() in order to obtain old value.
e) Implementation of getValue() first looked for local value field - it is null, then it should request for bound value from model.
I tried different ways to store state (client or server) but it was the same. Sadly MyFaces 1.1.1 implementation did even worse - local value of select was also null during first postback.
I wonder why it was implemented this way...
Thank you

I've just started to learn JSF, read corresponding chapters in J2EE guide and spec and tried to play little bit with JSF RI 1.1_01. I found very strange (at least for me) behaviour of regular input component (corresponds to inputText tag).
I have very simple example form (contains "select one", input component and command button). Corresponding backing bean has request scope. I set breakpoints in backing bean getters and during debug found:
1. On initial request both getters were called during rendering phase.
2. On form submit request getter for property bound to input component was called again (this looks strange for me) but getter for property bound to select box was not called (it looks as I've expected). This strange call occurs during validation phase. As far as I understand it was the following flow:
a) During initial request rendering response input box value wwas not stored in component state (I even may suggest that it was not set on component, just corresponding HTML tag with initial value was rendered).
b) On submit form submitted string value of input component was decoded from request parameters but local value was set to null (see above).
c) During validation phase submitted value was successfully converted and validated.
d) Then implementation had to detect component value change and called getValue() in order to obtain old value.
e) Implementation of getValue() first looked for local value field - it is null, then it should request for bound value from model.
I tried different ways to store state (client or server) but it was the same. Sadly MyFaces 1.1.1 implementation did even worse - local value of select was also null during first postback.
I wonder why it was implemented this way...
Thank you

Component is missing, not registered, not upgradeable

Hi,
I got the error:
"Error: 0xC0048021 at Data Flow Task, OLE DB Source [1]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "OLE DB Source;Microsoft Corporation; Microsoft SqlServer
v10; (C) Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;7"."
This apears in any destination or source connection

Hi Douglas,
Based on the current information, the issue occurs because there are only 32-bit relevant OLEDB drivers installed on the current computer, so you need to configure the SSIS project to run in 32-bit runtime mode. Regarding the issue that you don’t need
to change this property on the other servers, there can be two reasons:
The existing SSIS project on another server is already configured to run in 32-bit mode.
There are 64-bit relevant OLEDB Drivers installed on other servers, hence, the package can run in 64-bit runtime mode properly.
Regards,
Mike Yin
TechNet Community Support

Report parameter startdate has a defaultvalue or a valid value that depends on the report parameter startdate forward dependencies are not valid

Hi,
Am trying to develop a report the parameter has an issue, it gives me an error.
There are 2 parameter (1st is Date range like start and end date and 2nd is Loan number)
When ever I select date range the Loan number parameter should go blank. If I input a loan number then date range should go blank.
What should I do. Please help
ERROR --report parameter startdate has a defaultvalue or a valid value that depends on the report parameter startdate forward dependencies are not valid

Hi Kay_MD,
If there are only two parameters, we can use first parameter charge the second one, but the second one cannot charge the first one in turn. Because parameter forward dependencies are not valid. To achieve your requirement, we can create another parameter
to control Date_range and Loan_number parameters. For more details, please see:
Add a parameter named ReportParameter1 with two available values: Date_range and Loan_number.
Use the following expression as the default value in Date_range parameter:
=iif(Parameters!ReportParameter.Value="Date_range",1,"") (1 means a useless value)
Use the following expression as the default value in Loan_number parameter:
=iif(Parameters!ReportParameter.Value="Loan_number",1,"") (1 means a useless value)
Please note that the Date_range and Loan_number parameters should enable Allow blank value (“”), and the blank values should also be contained in available values.
If there are any other questions, please feel free to let me know.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

An error occurred while starting "OCMRepeater". The component was not found

I just built up an OVM 2.2 machine and then installed the manager 2.2 template followed by the 10.2.0.5 OMS Grid control template. I've got all the systems up and functional via those templates at this point but the Grid Control server starts up with 2 targets down. When I dig into it it really looks to only be the OCMRepeater under the Application Server and so both the Application Server and the OCMRepeater show as down targets. When I try to start the OCMRepeater from the I am asked for the OS username and password. I supply it with username oracle and the oracle password, which I have verified by logging into the VM. When I hit continue it tells me it is starting the component and then comes back with the following message.
An error occurred while starting "OCMRepeater".
The component was not found in the Oracle Home.
On a fresh install I really think that my Overview pie chart should be a 100% up all green affair. Can anyone give me a hand and help me figure out how to get everything running properly here?
Thanks,
Harold

Hi
I tried, but no luck.
./opmnctl status
Processes in Instance: EnterpriseManager0.rhel
-------------------+--------------------+---------+---------
ias-component      | process-type       |     pid | status
-------------------+--------------------+---------+---------
DSA                | DSA                |     N/A | Down
HTTP_Server        | HTTP_Server        |    2459 | Alive
LogLoader          | logloaderd         |     N/A | Down
dcm-daemon         | dcm-daemon         |    7308 | Alive
OC4J               | home               |    2460 | Alive
OC4J               | OC4J_EM            |    2461 | Alive
OC4J               | OC4J_EMPROV        |    2463 | Alive
WebCache           | WebCache           |    2496 | Alive
WebCache           | WebCacheAdmin      |    2464 | Alive
./oc4j_OCMRepeaterDeploy.sh $ORACLE_HOME
ADMN-300072
Base Exception:
OracleAS instance: Oracle Home: /u00/oms10g OC4J component: OCMRepeater is down
Resolution:
opmnctl: stopping opmn managed processes...
================================================================================
opmn id=rhel:6201
    no enabled components for this request
ADMN-300105
Base Exception:
J2EE application: OCMRepeater has already been deployed. Redeploy needs to be used to override previous deployed application
Resolution:
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rhel:6201
    no enabled components for this request

Everytime I load Firefox, a message appears stating: "unload: [Exception..."Component returned failure code: 0x80004005.......have to either click 'ok' or 'x' out. How do I get rid of this annoyance?

Everytime I load Firefox, a message appears stating:
unload: [Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIObserverService.removeObserver]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chrome://trustchecker/content/trustchecker.js :: anonymous :: line 955" data: no]
How do I get rid of this annoyance?

Tools > Options > Extensions 
Disable the Zone Alarm extension.

HT201210 Itunes won't launch? Message reads "Unable to locate Component - MSVCR80.d11 was not found. Do you have a solution please?

I just tried to update iTunes to version 11.1.4 on my Windows Desktop, which is normally not a problem.
However, halfway through the download, the following message pops up:-
"iTunes.exe - Unable to Locate Component. This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem"
I have uninstalled iTunes and reinstalled it, however the message is the same.
Any suggestions?

Read the threads over on the right under the heading of More Like This
Allan

Property or collection #comment was not found in the component interface

Hi All,
I am a Java developer trying to connect my java application to a peoplesoft webservice.
I have been able to connect to the PS webservice and access "GET","FIND" methods successfully.
But when i am trying to connect to the CREATE(insert) method, i get the following message text.
<faultcode>SOAP-ENV:Client</faultcode>
<faultstring>Component Interface API.</faultstring>
<detail>
<messages>
<type>Error</type>
<messagesetnumber>91</messagesetnumber>
<messagenumber>74</messagenumber>
<messagetext>Property or collection #comment was not found in the component interface at the given level.</messagetext>
</messages>
</detail>
I dont have any access to peoplesoft or db logs, i started using SOAP UI to get the detail messages.
Can anyone tell me what this message could be??
Basically its an insert method which takes around 40 parameters out of which 2 are mandatory.
The input that i send from my soap ui looks as follows
+*<kcm:CASE_ID></kcm:CASE_ID>*+
<kcm:DISP_TMPL_ID>CRM_GOV</kcm:DISP_TMPL_ID>

<kcm:QUICK_CD>?</kcm:QUICK_CD>

<kcm:PROVIDER_GRP_NAME>City Manager Action</kcm:PROVIDER_GRP_NAME>
<kcm:BUSINESS_UNIT>KCM01</kcm:BUSINESS_UNIT>

<kcm:PRODUCT_ID>?</kcm:PRODUCT_ID>
When i dont send any parameter in case_id i get the above error and when i send +*<kcm:CASE_ID>?</kcm:CASE_ID>*+
i get a sql error
<messages>
<type>Error</type>
<messagesetnumber>200</messagesetnumber>
<messagenumber>0</messagenumber>
<messagetext>SQL error. Stmt #: 650 Error Position: 123 Return: 1722 - ORA-01722: invalid number</messagetext>
<explaintext/>
</messages>
<messages>
<type>Error</type>
<messagesetnumber>200</messagesetnumber>
<messagenumber>0</messagenumber>
<messagetext>SELECT /*+ FIRST_ROWS */ CASE_ID, DISP_TMPL_ID, BUSINESS_UNIT, RC_STATUS, RC_SUMMARY FROM PS_RC_ADD_CASE_VW WHERE CASE_ID=:1 AND DISP_TMPL_ID=:2 ORDER BY CASE_ID, DISP_TMPL_ID</messagetext>
<explaintext/>
</messages>
<messages>
<type>Error</type>
<messagesetnumber>91</messagesetnumber>
<messagenumber>48</messagenumber>
<messagetext>Error accessing search record. {KCM_WEB_CASE_CI} (91,48)</messagetext>
<explaintext>An error occurred while accessing the search record.</explaintext>
</messages>
<messages>
<type>Error</type>
<messagesetnumber>91</messagesetnumber>
<messagenumber>61</messagenumber>
<messagetext>Failed to create the Component Interface</messagetext>
</messages>
I am not understanding how do i debug this further as its very difficult for me to get any peoplesoft logs or db logs.
Any help will be appreciated.
Thanks
Ash
Edited by: ash81 on Jun 14, 2010 1:24 PM

This will be very hard to troubleshoot without access to PeopleSoft.
Ideally, the best way to test it would be replicate the steps you are performing in your code through the component interface/web service, and then on the actual PeopleSoft component to see if you get the same error.
The second case where you haven't put in the parameters, make sure you clear out the ? marks and leave the value empty if you don't need to specify it.
E.g.
Instead of <kcm:QUICK_CD>?</kcm:QUICK_CD>
Use: <kcm:QUICK_CD></kcm:QUICK_CD>
I generally work backwards from soapUI -- look at the soapUI error, then test through the component interface tester in PeopleSoft application designer, then if required test in PeopleSoft.

"Dependent component 368A93BD-833B-11d3-9E98-00105AE811B7:1 was not registered" message appears after installation

Similar Messages

Maybe you are looking for