Report parameter startdate has a defaultvalue or a valid value that depends on the report parameter startdate forward dependencies are not valid

Hi,
Am trying to develop a report the parameter has an issue, it gives me an error.
There are 2 parameter (1st is Date range like start and end date and 2nd is Loan number)
When ever I select date range the Loan number parameter should go blank. If I input a loan number then date range should go blank. 
What should I do. Please help
ERROR --report parameter startdate has a defaultvalue or a valid value that depends on the report parameter startdate forward dependencies are not valid

Hi Kay_MD,
If there are only two parameters, we can use first parameter charge the second one, but the second one cannot charge the first one in turn. Because parameter forward dependencies are not valid. To achieve your requirement, we can create another parameter
to control Date_range and Loan_number parameters. For more details, please see:
Add a parameter named ReportParameter1 with two available values: Date_range and Loan_number.
Use the following expression as the default value in Date_range parameter:
=iif(Parameters!ReportParameter.Value="Date_range",1,"") (1 means a useless value)
Use the following expression as the default value in Loan_number parameter:
=iif(Parameters!ReportParameter.Value="Loan_number",1,"") (1 means a useless value)
Please note that the Date_range and Loan_number parameters should enable Allow blank value (“”), and the blank values should also be contained in available values.
If there are any other questions, please feel free to let me know.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

  • I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the "Recommendation Report" screen, I clicked "Non-Included Trans." and saw that one of the vendors (Vendor Code: WILCO) has the followi

    Hello,
    I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the “Recommendation Report” screen, I clicked “Non-Included Trans.” and saw that one of the vendors (Vendor Code: WILCO) has the following error:
    “The document amount is greater than the max. amount allowed in the payment methods linked to the BP”
    Upon checking, the “PCF-W” Payment Method linked to WILCO does not have any restrictions, nor does WILCO have any credit/commitment limit set. I have also appropriately defined the Dummy Business Partner Bank (under Payment Terms) as well as checked the “Included” box for PCF-W on the Payment Run-Payment Methods screen.
    Could anyone please help me on this?
    Salamat,
    Cat

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • Not appear the value when i execute the report

    Hi, what reasons could be:
    appear "#" instead a value for example "100", but only forthe records of the last load, the other records of another loads are ok, the report show
    Infoobject value = 200
    KF = 1,
    but for the last record in the query
    Infoobject value = #,
    KF=  1
    in the cube exist this record, it not must be # , is 100, the only thing that i did was change an attr Nav, of this infoobject, just mark the check of lowercase allowed,
    i dont know what can i do to solve this problem that i made i m sure because i execute this report yesterday and it was ok....
    help

    i reactivate the Master data,
    i was checking and this Infoobject has 10 records in the cube and in the KF that i evaluate has record 1 = 1, record 2= -1,  you know, and the others records that appears in the report has just 1, i guess this happend because i run the Delta load twice, i have just to load only one record trought Repair  load and now appear ok in the report, but the problem is i can do this repair for all the records because it works with delta, and the delta works wrong....

  • The default value as "None" for the report filter which is Value List type?

    Hello,
    I want to know is it possible to make the default value as "None" for the report filter which is Value List data type?
    For example:The Project Classification Value List value type which have many value like "Supplier Rationalization" "Category Sourcing" "Contract Regegotiation" etc, and the value "Supplier Rationalization" is in the frist positon in the value list. When i use "Project Classification " as a report filter, the value "Supplier Rationalization" displayed as default value. And in the value list box in report filter of Project Classification , there is a value "None" which should be added automatically by system. So i manually filled the default value with "None" in Filter Prompt screen, but it does not work. After i display the report ,the Project Classification filter still use the ""Supplier Rationalization" as the default value.
    My current ESO version is 5.1. I tried other ESO version like 5.15, if i manaully give a default value "None" in Filter Prompt screen for filter Project Classification, then the default value is "None". It works well.
    Does anybody know if it's possible to do the same thing in ESO 5.1?
    Thanks & Regards,
    David
    Edited by: David Gao on Aug 11, 2010 4:06 AM

    Hi David -
    This is possible, but the technique is not too obvious...
    To make "None" be the default choice for a query definition filter parameter of type value list type, you need to set the default value of the filter parameter to the following:
    <internal id of value list type>:616:NULL
    For example, I believe you will see that the internal id of the Project Classification value list type is 51, so the default value of the filter parameter would be:
    51:616:NULL
    I hope this helps.
    Regards,
    Rob

  • Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file [help]

    Hi,
    I have a excel file that I have been using since beginning of year.
    Yesterday, I tried to open it but a message comes out "
    Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file"
    After I click yes, the page is blank. The file is about 400kb in size.
    I have try open and repair and third party repair program and not working also.
    I would appreciate a lot if you can help me.
    Thank you very much.

    Per your post, this problem might be caused by malware on the affected machine.
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
    In order to clean your machine, run Microsoft Safety Scanner (http://www.microsoft.com/security/scanner/en-us/default.aspx) to kill the malware, and then repair Excel file itself.
    If this is not the case, feel free to post back and let me know. Thanks.
    Tony Chen
    TechNet Community Support
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Grid value( Field J_3ASIZE ) in the report MB5T in SAP-AFS

    Hi
    How can i bring the Grid value ( Field J_3ASIZE ) in the report MB5T for particular STO in SAP-AFS industry solution.
    I tried in the layout but there are no such fields to bring in !!
    Help me out swiftly.
    cheers
    Maruthi
    Edited by: MARUTHI RAM on Apr 15, 2009 1:53 AM

    Dear Maruthi,
    MB5T will not give grid details but ME2W will give grid details. Please enable AFS details for the scope of list in customizing  for ME2W scope of lost
    MM --> ME2W
    You can create consolidated report using the 2 reports MB5T and Me2W. MB5T give PO with in transit stock and ME2W will give PO with grid details.
    I hope this clarifies.
    Regards,
    Rakesh

  • SSRS parameters are not valid in subscription, but are valid when run report on-demand

    What is the cause?  
    Somebody has also that problem?  Can it be the report or the SSRS server itself?
    The SSRS is also not always consequent. So share me your experience.
    Thanks!

    Sorry did understand what the issue is. Have you set a default value for parameters?
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • How to display Base values (AFS Grid) in the Report

    Hi Friends,
    We ar using AFS, in that we have Grid value like 0003A34
    (8 chars: first 4 chars colour (0003), A represents Cup, 34 represents size of the Material), in that we can able to store the Base values like for International or US,
    and for size 34 equivalent to 70 like wise.
    In our reports we are using ALV grids, and showing the existing grid value like 0003A34, but we need to show Base value list like INTL or US etc, based on the region / area, the report should show the equivalent grid value like 0003A70 etc.
    Please help me how to do this.
    Thanks
    Shankar

    Dear Shankar;
    I think you will be able to achieve what you try to do using grid conversion in AFS. Base Grid values can be converted to other values based on the customer, vendor or material depending on your requirement. This need to be configured in IMG and then the ID must be assigned in the Vendor or the Material Master as per the requirement.
    This is somewhat complex config. Please contact me if you need any more clarifications ([email protected])
    Azwath Mohammad
    http://www.sapafs.net

  • Key figure values vary each time the report is run by different users

    Hi All,
    We are facing a unique problem, here it goes :
    Different users are getting different values for the same key figure, when executing the same query  on the same selection conditions.Each time, user executes the report, he is getting varying values for the same key figure.Any idea's how to resolve this issue??
    Thanks in Advance
    Bindu

    Hi Bindu,
    One reason might be due to authorizations as discussed earlier.
    check how frequently is the cube getting refreshed.
    This might also happen that if users are running the data at different times and there is a cube load in between.
    check for this.
    Cheers,
    Srinath.

  • Data missing when I print preview and export to pdf but do see the data when i navigate to that page in the report

    Hi,
    I have a report which consists of 9 subreports in 2 tables..
    When the run report I do see data.
    when i export to a pdf and print preview the report in Bids.. i see data for the first 22 pages and then the remaining pages are blank with just the header showing up...
    when i go to the pdf and select page 25 it is blank but when i go the report and not in print preview mode.. and i type in 25 in the page number data shows up on that page...
    the report is set to a portrait and the margins are set to 0.
    How can I solve this problems and why is it happening... the size of the sub report are the same..
    Any help will be appreciated.
    Thanks
    Karen

    I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

  • Is there any fuction or bapi that can print the report automatic?

    Dear All
    I want to print the report( generated by command write ) automatic.
    Is there any function or bapi that can do it?
    Thank you in advance.

    Hi,
    Please try this.
    report ztest_auto_print.
      DATA:L_PARAMS TYPE PRI_PARAMS,
           L_VALID TYPE C.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
           EXPORTING
             IMMEDIATELY                  = 'X'
             LINE_SIZE                    = 220
             RELEASE                      = 'X'
             MODE                         = 'CURRENT'
             NO_DIALOG                    = 'X'
           IMPORTING
    *     OUT_ARCHIVE_PARAMETERS       =
             OUT_PARAMETERS               = L_PARAMS
             VALID                        = L_VALID
           EXCEPTIONS
             ARCHIVE_INFO_NOT_FOUND       = 1
             INVALID_PRINT_PARAMS         = 2
             INVALID_ARCHIVE_PARAMS       = 3
             OTHERS                       = 4.
          IF SY-SUBRC <> 0.
          ENDIF.
    "But it will take default printer from user settings
          NEW-PAGE PRINT ON   PARAMETERS L_PARAMS NO DIALOG.
           write : 'print is on'.
          NEW-PAGE PRINT OFF.
    Regards,
    Ferry Lianto

  • My touch screen on my ipod Nano, Generation 6 has gone completely white. I can still play music if I "accidently" touch the right icon. Does anyone know how I can fix this. Also I have 2 other ipods that i can't sync anymore, it says they are not compatib

    My touch screen on my ipod Nano, Gen 6 has gone completely white. It had started going white the day before. I tried resetting it but to no avail. Does anyone know how I could fix this. Also I have 2 other ipods that I am no longer able to sync. It comes up with a message (best I can remember) something to the effect that my itunes version is not compatible with my ipod. Please help. I'm tired of buying new ipods when the new hasn't even worn off of them!!!
    Thanks

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • How to change the image dynamically depend upon the input parameter

    Hi All
    I have one report running depend upon the Organization specific, I have 15 operating unit and 15 different logo for each operating unit.
    How to change the Logo dynamically depend upon the input passed by the user.
    If I have three or four logo i can add in my layout using if else statement and its works fine but i have more that 10 logos so its no possible to keep these in My RTF Template.
    Is it possible to change the logo according to the input without keeping this in Template.
    I have seen this link but its not working fine
    http://erpschools.com/articles/display-and-change-images-dynamically-in-xml-publisher
    Regards
    Srikkanth.M

    Hi,
    I have not completed fully,so sorry i cant able to share the files, could you please give me some tips and steps to do.
    Without having the logo in RTF if it possible to bring the logo depends on the user input (Ie Operating unit).
    Regards
    Srikkanth

  • Filtyer by the sum of a fact/metric that is on the report

    Hi
    I have a fact on the report that shows the count of apointments per day. How do I filter on this fact/report so that the report shows only the days that have more than 7 appointments please?
    Also I couldn't find an answer to this in the forums. Do you just call counts facts in obiee? whereas in a different tool I would call them metrics.
    Regards,
    Hilary

    hi hilary,
    Duplicate the fact column in the report and count that column say count(fact_column) and on it apply filter saying count(fact_column)>7 then it fetches you data when this filter condition satisfies the condition.
    Cheers,
    KK

  • Paramerterized Interactive Reports - when running or clicking on a specific page how can I stop the report from rendering BEFORE the user enters parameters.

    I wasn't able to display in pic in this post 
    But it would look something like this
    Order type  -ALL- (select list)                GO (button)
    When I come into this page - the report renders ALL the data because the SQL is as follows
      AND ol.unit_selling_price <> 0
               AND(ordertype.transaction_type_id = :P1_TEXT OR :P1_TEXT IS NULL)
                ORDER BY   3
    Its setup this way because I want all records returned if the user makes no selections BUT CLICKS the "GO" or "SEARCH" button.
    I just don't all records rendered upon initial screen entry and without user having selection options....I.E initiate via a button.
    Thanks

    Hi,
    Here is what you can do with out any hidden items.
    on report condition select request = e1
    and enter  GO
    Now when you hit the Go button which actually submits the page to perform the search right?
    Now create a branch and redirect to same page and in REQUEST enter: GO  (But make sure you are selecting when GO button clicked and make it first branch if you have any unconditional branches)
    So the report will be seen by the user only when he hits the GO button from that screen.
    Simple enough right?
    Thanks,
    Ramesh P.

Maybe you are looking for