Deplacement d'une animation Flash sous dreamweaver

Bonjour,
J ai une animation flash en bas a droite de mes pages mais
parfois les pages sont plus grandes que 700 pixels en hauteur et
forcement quand on utilise l ascenseur l animation reste a sa
place! je voudrais qu elle glisse en meme temps que le defilement
de la page: je descends , elle descend!
j avais vu quelque chose a propos d un script base sur la
position relative par rapport au haut de la page mais je le
retrouve plus.
Pouvez vous m eclairer.
merci

oui, c'est possible:
http://www.uncontrol.com/_flora_2/flora_2.html
e-S-tampida
http://development.bbri.be/elearning2
(pre-release version V2.3.2)
A tous ceux qui ne lisent pas la documentation (livre ou F1)
http://development.bbri.be/ictp/flash/rtdfm.jpg
"blitule" <[email protected]> wrote in
message
news:e2snbd$rmk$[email protected]..
> Bonjour ? tous,
>
> Je dois animer l'?volution d'une plante en acc?l?r?, en
vectoriel sur
> Flash,
> et j'aimerai savoir s'il existe un moyen de le faire en
action script...
>
> merci
>
> J'ai commenc? en le faisant image par image mais ?a
risque d'?tre long...
>

Similar Messages

Comment créer un insérer un menu dans une animation flash 8?

bonjour,
je voudrais savoir comment inserer un menu ds une animation
flash qui apparait avec evenement de positionner de la souris?
merci

Utilisez le Menu component et utilisez l'evenement OnRollover
sur votre animation flash pour montrer le menu:
yourMovieClip.onRollOver = function () {
yourMenu.show(100, 20);

Problèmes de typo endommagée à l'exportation, sur une animation Flash

Bonjour,
Je viens de terminer une petite animation sur Adobe Flash CS6 pour MAC.
Lors de l’exportation en fichier animation.swf certaines typographies se trouvent dégradées alors que sur Flash je ne vois aucun problème.
Quelqu’un d’entre vous a déjà eu ce type de problème ? Avez-vous trouvé une solution ?
Merci pour vos réponses
Nat

oui, c'est possible:
http://www.uncontrol.com/_flora_2/flora_2.html
e-S-tampida
http://development.bbri.be/elearning2
(pre-release version V2.3.2)
A tous ceux qui ne lisent pas la documentation (livre ou F1)
http://development.bbri.be/ictp/flash/rtdfm.jpg
"blitule" <[email protected]> wrote in
message
news:e2snbd$rmk$[email protected]..
> Bonjour ? tous,
>
> Je dois animer l'?volution d'une plante en acc?l?r?, en
vectoriel sur
> Flash,
> et j'aimerai savoir s'il existe un moyen de le faire en
action script...
>
> merci
>
> J'ai commenc? en le faisant image par image mais ?a
risque d'?tre long...
>

Bonjour Je viens d'utiliser Flash CC pour animer des bannières pour Google. Hors je constate que je ne peux publier ou exporter que vers Flash 10.3 minimum. Hors Google, demande une version flash 10.1 maxi. Comment puis-je enregistrer en 10.1, SVP ? C

Bonjour
Je viens d'utiliser Flash CC pour animer des bannières pour Google. Hors je constate que je ne peux publier ou exporter que vers Flash 10.3 minimum. Hors Google, demande une version flash 10.1 maxi.
Comment puis-je enregistrer en 10.1, SVP ?
Cordialement

Je vais défaillir. J'en ai tellement besoin de cette option...
S'il vous plait : I NEED HELP!

Quelle est la meilleur solution pour réaliser une animation de type "dessin animé"

Bonjour à tous,
je souhaite réaliser une animation du même style que la pub "Maif" ( http://www.youtube.com/watch?v=7-9zz2wTOc4&feature=related ) ou que cette animation ( http://www.youtube.com/watch?v=oVNQFyrhK-o).
Quelle serait la meilleur solution ?
De la réaliser en flash image par image ou existe-t-il une méthode ou un logitiel plus pratique pour ce genre d'animation ?
Je dispose d'une tablette graphique, et une bonne connaissance Flash.
Merci pour vos réponses.

Bonjour, jolies références, mais large travail en perspective.
Niveau outils, Flash est une solution, After-Effects en est une autre.
Je pense notamment à la stabilisation nécessaire pour réussir les plans de la deuxième animation avec la main.
Il en existe bien d'autres aussi.
Pour ce qui est de choisir un outil, chaque utilisateur aura tendance à privilégier (et recommander) la solution qu'il maîtrise le mieux, même si elle peut paraître plus laborieuse qu'une autre, si on y est plus efficace, c'est toujours du temps gagné.
Puisque vous disposez d'une tablette et que vous connaissez Flash, alors je vous dirige vers Chris Georgenes http://www.keyframer.com/ qui est un bon exemple d'utilisateur agguéri. (Son livre est traduit en français sous "l'art du bluff avec Flash").

J'essaie d'insérer une animation An dans Dw mais il manque un plug-in-?

J'essaie d'insérer une animation Edge Animate dans une page de Dreamweaver mais j'ai le message suivant "impossible de charger le plug-in" quand je veux le visualiser en direct.

Bonjour Christian-
Pouvez-vous mettre un lien vers votre fichier de sorte que nous pouvons jeter un coup d'oeil dans un navigateur? Vous devrez peut-être supprimer l'animation Flash manuellement via le mode de code dans Dreamweaver. Veuillez noter que cette question est probablement mieux posée dans le forum Dreamweaver, comme cette équipe gère l'intégration.
http://forums.adobe.com/community/dreamweaver?view=discussions
Ce message a été traduit machines.
Can you post a link to your file so that we can take a look at it in a browser? You may need to remove the Flash animation manually via code mode in Dreamweaver. Please note that this question is probably better asked in the Dreamweaver forum, as that team handles the integration.
Thanks,
-Elaine

Flash or Dreamweaver? (Either?)

Here is today's softball/dumb question. In an effort to create my own website I have been spending a considerable amount of time learning the essentials of many Adobe programs through Lynda.com and with Adobe's CS5 Master Suite of software. Most recently I have been going through Flash tutorials. When it comes to creating a website through Adobe software I thought Dreamweaver, HTML, CSS, etc were the foundation, (i.e., framework), of ALL website creation and that all other programs, Ps, Ai, Fc, etc....AND Flash where used in SUPPORT of that goal. That is they created the graphics and other animation files used within the Dreamweaver website foundational framework...but Dreamweaver was essential (using Adobe software).
The more I learn about Flash and applications such as After Effects the more confused I am becoming because, though I am unsure, it seems that Flash can be used as a foundation for a website all by itself and Dreamweaver cut out of the process all together. So my basic/fundamental/dumb question is is that correct? Though an answer to that question requires only a simple yes or no answer, and a simple yes or no answer is welcome and appreciated, any elaboration on the basic structural use of these various Adobe programs in pursuit of the goal of creating a website would be appreciated as well.

Sounds like you are well on your way this your project and I wish you the best!
Just to clarify one point.. There is no such thing as a Flash Website .. only HTML, PHP, ASP etc. sites which may have some Flash content.
So I don't think it's a question on using Flash or Dreamweaver to build your site... most likely you will need both, Flash for the content, DW (or some other editor) for the page structure as well as any PHP for server side scripting you may need.
As for building your own shopping cart, I suggest you start at your bank and work back from there to your Web site, NOT the other way around. Banks are very strict about which "Gateways" they use and the Gateway company is very strict about which shopping cart they will allow to connect to there services.
If you are expecting to collect payments via credit cards, you'll most like need a Merchant Account at your bank. Check and see what it takes to get yours set up. That's the account that your Gateway service will connect to... for background info..here are a couple used by local banks here:
http://www.authorize.net/
and
http://www.firstdata.com/en_us/home
But get with your banker before going too far. Make sure that you don't have to undo some of the efforts and development because they did not meet bank or gateway specs.
Best wishes,
Adninjastrator

Cadre autour des anim flash a cause mise a jour ie6

bonjour a tous,
vous avez du constater un cadre qui apparait autour des anim
flash depuis une mise a jour windows concernant ie6,
ce qui oblige tous les webmasters a corriger les pages de
leur sites....
merci microsoft....
j'ai trouvé une ou 2 adresse pour recuperer un
javascript qui corrige ce probleme mais je n'ai pas su les
exploiter,
est ce qu'une methode simple et efficace existe?

Je ne savais pas que cela venait d'une mise a jour de
windows. En faite Microsoft a perdu un proces avec Java sur des
ayant droit ActivX d'ou cette mise a jour et ce blocage. J'ai le
meme probleme mais je n'ai pas ue le temps d'essayer de le
corriger. Avez vous essayer d'installer la derniere mise a jour de
la machine virtuelle de Java ?

Could work an animated flash bitmap image exported in html 5, in DPS ?

I'm new in DPS, just started for a couple of weeks and I need to use a image in an animation.
I created the animation in inDesign exported in .fla, used de toolkit js, load it in a container with web content overlay, and when I preview it with Adobe Content Viewer it doesn't work, it apears a blank screen. Neighter of animation from that stage won't work.
To be very precise any animation works fine, when I test the html in a browser, the problem appears only in the content viewer.
The animation is very simple: smal logo entering in the stage from the right, not very complex.
I tried in flash with other images in a test file and loaded in inDesign, and still don't work. Other vector animation works well, no problem. I saw that if I have an image in library in flash and export a simple animation with a vector ball, won't work in indesign preview, with content viewer.
My question is, Could work an animated flash bitmap image exported in html 5, in DPS ? If so, what should I need to do ?
Thank you in advance.

Two possible solutions I was considering:
1) In my index/first page, have all the swfs present (scaled to 1x1, behind something, or invisible) and have a preloader code on that first page... so all the content gets loaded before continuing onto the rest of the site. That would certainly work in making the site run quick... but would mean a relatively lengthy wait at the start. Luckily, unlike my current site, all the actual site content (aside from the header/nav interface) is HTML... so the bulk of the site's content is in the HTML pages, not as part of the Flash header... so it probably wouldn't be too horrific a wait. However, it would be loading EIGHT of these swfs, since there are eight pages... so then maybe it would be....
2) Have an swf that consists of just the 'draw up' of the interface, and it's idle state... then when each button is pressed, load a new swf to replace the main one, which has the specific page's animated title sequence, and ends with the code to load the html page. So, each separate HTML page would have embedded into it only the main swf, and the title animation swf would be swapped in when a nav button is pressed. Main issue here is each button press would envoke a preloader sequence (kind of tedious)... and unfortunately all the 'main interface' elements loaded in with the main swf would have to be loaded in again at the start of each animated title swf (although none of the draw up... just the loading of the interface and buttons). For highspeed users, it should be okay, I guess....
Thoughts or better ideas?

Embed Animated Flash Objects (*.swf file) in Oracle Forms.

Hello All,
To Embed Animated Flash Object (Shockwave *.swf File) in Oracle Forms, Please Follow the Steps Below.
1. Draw "ActiveX Control" Item on Canvas with the Name "OCXITM".
2. Select "ActiveX Control" Item & Go to its Properties (By Pressing F4).
3. Select "ShockwaveFlash.ShockwaveFlash" in "OLE Class" Property of "ActiveX Control" Item.
4. Come again to the Canvas.
5. Right Click on "ActiveX Control" Item, Select "Insert Object...".
6. In Control Type List, Select "Sockwave Flash Object" and Press "OK".
7. On Canvas, Select "ActiveX Control" Item, Go to "Program" Menu, Select "Import OLE Library Interfaces...".
8. Select All "Method Package(s)" & "Event Package(s)" for "ShockwaveFlash.ShockwaveFlash.X" & Press "OK".
9. Go to "Object Nevigator" (By Pressing F3) & Expand "Program Unit" to verify that the Packages are Successfully Imported.
10. Compile All the Objects (By Pressing "Ctrl+Shift+K").
11. In "WHEN-NEW-FORM-INSTANCE" Trigger Write the Below Code.
** Author   : Muhammad Waseem Haroon                        *
** Dated    : 07-Apr-2005                                   *
** Purpose : To Call Macromedia Flash Object (*.swf File) *
** Module   : Logo                                          *
DECLARE
     oleitm OLEOBJ;
BEGIN
     oleitm := :item('OCXITM').INTERFACE;
     ShockwaveFlash_IShockwa_0.Movie(oleitm,'d:\movie.swf');--it can be dynamic.
END;12. Compile, Save & Run Your Form.... and... See the Beauty.
Thanks & Regards
Muhammad Waseem Haroon
[email protected]
[email protected]
[email protected]

Mark Striekwold did an effort to put flash into forms
http://mark-oradev.blogspot.com/2010/02/flash-inside-oracle-forms.html
http://mark-oradev.blogspot.com/2010/02/flash-test-inside-oracle-forms-part-2.html
http://mark-oradev.blogspot.com/2010/04/flash-test-inside-oracle-forms.html

Flash in Dreamweaver???

I have uploaded and displayed flash in dreamweaver before but
for some reason i cannot get it to work now. Does this have
anything to do with CSS? The file is succesfully on the server as
you can see at www.zcarpentry.com/dropmenZCI.swf but when going to
www.zcarpentry.com the blank space on the left is where the menu
should be. PLEASE HELP!!! I am self taught and think i may be
overlooking something here is my source code:
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
width="182" height="460" align="middle">
<param name="movie" value="../../Z
Carpentry/htdocs/dropmenZCI.swf" />
<param name="quality" value="high" />
<embed src="../../Z Carpentry/htdocs/dropmenZCI.swf"
width="182" height="460" align="middle" quality="high"
pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash"></embed>
</object>

Self taught developers usually don't get some of the finer
usability points.
If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines don't parse Flash links - your site will
not be spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
It's usually a very bad idea for these reasons...
In your case, the most profound problem is #2 - since you
have an all-Flash
page, you will not find much love from the search engines.
And even though
Google is saying it now scans Flash links, I am skeptical.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Frank Gioia" <[email protected]> wrote in
message
news:[email protected]...
>I have uploaded and displayed flash in dreamweaver before
but for some
>reason i
> cannot get it to work now. Does this have anything to do
with CSS? The
> file is
> succesfully on the server as you can see at
> www.zcarpentry.com/dropmenZCI.swf
> but when going to www.zcarpentry.com the blank space on
the left is where
> the
> menu should be. PLEASE HELP!!! I am self taught and
think i may be
> overlooking
> something here is my source code:
> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=9,0,28,0" width="182" height="460"
align="middle">
> <param name="movie" value="../../Z
Carpentry/htdocs/dropmenZCI.swf"
> />
> <param name="quality" value="high" />
> <embed src="../../Z Carpentry/htdocs/dropmenZCI.swf"
width="182"
> height="460" align="middle" quality="high"
> pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
> n=ShockwaveFlash"
type="application/x-shockwave-flash"></embed>
> </object>
>
>

Flash vs dreamweaver

bijour tout le monde!!!
je souhaite donc crée un site web!
je ne connais que le flash et j'aimerais savoir lequel de
flash ou dreamweaver est le meilleur dans ce domaine
quelles sont leurs difference et tout le reste quoi?!
merci!!

lol
e-S-tampida
http://development.bbri.be/elearning2
(pre-release version V2.3.2)
A tous ceux qui ne lisent pas la documentation (livre ou F1)
http://development.bbri.be/ictp/flash/rtdfm.jpg
"Kalimbra" <[email protected]> wrote in message
news:e2smfb$qbb$[email protected]..
> touy wrote:
>> bijour tout le monde!!!
>>
>> je souhaite donc cr?e un site web!
>> je ne connais que le flash et j'aimerais savoir
lequel de flash ou
>> dreamweaver est le meilleur dans ce domaine
>> quelles sont leurs difference et tout le reste
quoi?!
>>
>> merci!!
>>
>
>
http://www.macromedia.com/fr/software/dreamweaver/
>
>
http://www.macromedia.com/fr/software/flash/flashpro/

Integrating a little Flash in Dreamweaver

Hello All,
I am a newbie and just finished a Flash class. However we
didn't hardly talk at all about integrating Flash with Dreamweaver.
What I want to do is create an intro page that has Flash and
then you have to click on a Button to go into the main site. I
understand a little of Behaviors and Actionscripting so thought
that I would do the GetURL Behavior (going off memory here) to get
me from the Intro page to the main Dreamweaver site.
Question is... do I export an SWF file, put that in a
index.html page for the Intro page and then link to the main
Dreamweaver site but have the main site not an "Index" file but
another name...maybe main.html.
Is this what people do? Or do they take the generated .html
file from Flash (its published) and just use that as their intro.
Naming it index.html. And then linking to another *.html created
with Dreamweaver but that is not saved as index.html.
Also, how often are people doing a PURE Flash website and not
mixing the Flash and Dreamweaver together? Just curious.
Thanks for clarifying.
Computerkitten

It's the new IE functionality (introduced in the April 2006
patch update for
IE6 and made compulsory by the June 2006 patch update) to
comply with a
ruling against Microsoft's patent infringement.
It's triggered by the <object>, <embed> and
<applet> tags on a page. Flash
is normally imported into a page via the <embed> tag
hence it's affected by
the change. Content imported into a webpage by these methods
is known as
Active Content and now requires an extra click to activate it
and interact
with it.
The workaround ultimately rests with website designers who
are now advised
by Microsoft and Adobe etc to implement the controls for
Active Content in
their sites indirectly via Javascript rather than direct HTML
tags.
If you have DW8, the 8.0.2 updater will insert Flash with
Adobe's
recommended Active Content fix already included in the code.
With any other
version of DW, you'll have to do it manually.
http://support.microsoft.com/kb/912945/en-us
http://www.macromedia.com/devnet/activecontent/
http://www.baekdal.com/articles/Technology/microsoft-ie-activex-update
http://blog.deconcept.com/swfobject/
Some background:
http://en.wikipedia.org/wiki/Eolas
Regards
John Waller

Animated Flash Component Scaling when used as Button Skin

I am trying to skin the overSkin of a Flex Button component with an animated Flash .swc component. (Actually, an Accordion Header, but for all practical purposes the same.)
All works completely fine, in most cases. The problem I run into is when I have any objects in the Flash animation moving on and off stage. When this happens, although the objects cannot be seen when moved off-stage, the viewable area of the Flash animation scales down in either direction, or both, to make room in the button for the objects off stage.
If I play the animation directly in the application, or a Canvas, everything works fine and no scaling occurs. But for a Button, where I really need it, I get the constant scaling back and forth as the Flash movie runs. This can be REALLY annoying when trying to click on a button! (Or you find that you are no longer "over" the button (because it scaled down) so you get flicker back and forth between the Up and Over states.)
Any ideas on how I can keep this from happening, either on the Flash or Flex side would be much appreciated.
Pertinent Code:
[Bindable]
[Embed(source="assets//btn_StaticHollywood.jpg")]
private var Film:Class;
[Bindable]
[Embed(skinClass="fc.HollywoodWithSearchlights")]
private var FilmOver:Class;
animatedButton.setStyle("upSkin", Film);
animatedButton.setStyle("overSkin", FilmOver);
<mx:Button id="animatedButton" cornerRadius="0" />
Note: I tried all assortments of setting dimensions I believe.
Remember, the Flash component has objects that move in and off the stage from both directions, and this is the cause of the automatic resizing of the Button when it runs.

I am assuming that you are using Flex 4 and this does not work. In Flex 4, the default theme used is the "Spark" theme. In Flex 3, we used the "Halo" theme. The Halo theme supports styles like borderStyle, but, the Spark theme does not.
If you want to use these styles, you will need to compile with the Halo theme. You can do this by adding an additional compiler argument -theme=<SDK_DIR>/frameworks/themes/Halo/halo.swc (point to the halo.swc in your SDK installation)
Joan

Inserting FLASH into Dreamweaver cs3

I am trying to build a VERY basic website in Dreamweaver. Using their single fixed column, centered,template, i would like to ad 2 flash items, a menu and small movie, in to he top of the column. (Both flash items are larger than the column with, if that matters,i was going to resizxe them nce i got this part of the cose correct)
For some reason the flash movie shows in my Dreamweaver preview, but not when i load it live online @ www.srg-buffalo.com.
The address i have used for the flash movie is: http://www.srg-buffalo.com/flash/header_v8.swf
The website is hosted at www.swq-buffalo.com, if you want to check out the source code.
I have no idea what I am doing wrong, i thought it was pretty simple, there is no flash block via my go daddy host.
How i inserted it via dreamweaver cs3:
Insert> Media> Flash.
URL= http://www.srg-buffalo.com/flash/header_v8.swf
What am i doing wrong?
Thanks for any help.

Thank you,
That rung a bell.
I uploaded both saved .SWF documents to the Scripts directory.
There was also a Scripts dirrectory saved with index.html, in this directory was the AC_RunActiveContent.js file,any thoughts on that?
i uploaded it to scripts,along witht he others, and the space dedicatd to the flash events is there, but they are not showing.
http://www.srg-buffalo.com/
D. Jude Bulera
Buffalo, NY
[email protected]
Date: Wed, 17 Aug 2011 12:45:32 -0600
From: [email protected]
To: [email protected]
Subject: Inserting FLASH into Dreamweaver cs3
When you insert the SWF, you shouldn't have to actual type anything - it's a browse and select process and will automatically enter the correct path to the SWF. Then you have to upload the page and the SWF file. This next part I think has changed in later versions of DW, but in CS3 I'm pretty sure the process will also create a folder named Scripts. This folder along with it's contents also need to be uploaded.
>

Deplacement d'une animation Flash sous dreamweaver

Similar Messages

Maybe you are looking for