"not assign" problem in report for attributes

I have a problem to display attributes in report, both navagational and attribute-only attributes. I checked the Char, which is assigned attributes and attributes' text table and master table. All records are right. I don't know what's problem and how to check where is the problem?
Thanks!!!

You have added this new attributes to an infoobject, add filled with all your data. but you need to activate the master data for this infoobject!
You do this in the RSA1 selecting the infoobject and click with the right bottom and select the activate master data.
After that yoor data is available for working with it.
If i helped you don´t forget the yellow star...
Grettings,
António

Similar Messages

  • FSV not assigned accounts in Report Painter

    Hi
    I created one report through Report painter for Balance display.
    After Execution of the report in Drilldown many Balance sheet G/Ls are showing as not assigned in the report.
    As they are assigned in the Financial statement version.The G/Ls not assigned are the Balance Sheet G/L.
    Thanks

    Hi,
    Can you please check the financial statement version which might have been included in the general data section of the report or the column characteristics. Also check the row element/ cell element defination.
    Regards,
    Gaurav

  • SAP Note 1614681 - ESI monthly report for filing details of ESIable employe

    Any one implemented this SAP Note
    While doing the manual steps mentioned in SAP Note 1614681 - ESI monthly report for filing details of ESIable employees .
    we found some difficulties.
    Please let me know the steps that you followed while implementing this.
    Note Summary
    Symptom
    As per the new rule introduced by ESIC authorities, an organization is liable to file details of employees eligible for ESI contribution during a particular period/month. Details are to be uploaded on the ESIC website in the format prescribed by the ESIC authorities. Currently, as a part of SAP standard delivery, ESI Form5 and Form6 are provided which are used to report ESI contribution for a period of six months. However, there is no such provision to generate monthly ESI details in system and report it to the ESIC authorities.
    Other terms
    HINCESI0, PC00_M40_ESIF, ESI , Employee State Insurance, ESI Monthly report, IT0588, ESIC.
    Reason and Prerequisites
    Legal Change.

    Hi,
         We tried to apply the manual steps mentioned along with the note. We were able to do first two steps that is inserting the messages in message class and creating new text elements..
    When we tried for the 3rd step, we are facing the problem..
    When we gave the name ''HR_IN_ESI_MON_DET '' in SE18 and and try to create it asked for the package...since it is SAP standard we gave PC40( since all ESI badi is saved in this package i gave this) for the package name.....and it got created and each time it was asking for Access key...( After providing access key in each step it got created)
    Now when i check in SE80 this enhancement is there....but if i check in SE18 it says Enhancement spot doesn't exist.  
    check the screen shot:
    http://www.mypicx.com/10052011/ESI_manual_Steps/

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3

    Hello ,
    I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3.
    My universe is working fine with LOVs but when i run the webi report , the LOVs arent working.
    have anyone facing the same issue. any idea why the LOVs arent working on higher version.?

    Hi Victor,
    The List of values we will assign in universe in order to get filtered data works on universe query panel
    but the same objects when i am using in report(webi report) , the List of values are not working .i.e
    they are not getting displayed in webi report.
    for ex: i have country object having country names as LOVs and state objects having state names as LOVs . Now when i select Country value , the LOVs of state objects should get filtered and shows only states which belongs to country .
    the above logic is not working in webi report , i am only able to select country and when i go for state, the state names do not get filtered.
    please let me know why this is happening in the SP2 patch 3 version and its working fine for SP2  , but the chrome issue gets solved after applying patch 3 and not if we only upgrade to SP2.
    the webi reports are not working in chrome browser if we using SAP B04.1 SP2 and lower version
    but the LOVs are not working in SAP BO 4.1 SP 2 patch 1, 2,3.
    kindly help me with the issue

  • How to Supress 'Not Assgined' in the Report for a char

    Hi,
    The BI Version i am working is 7.0.
    WHat are the settings i have to make in Query for the below requirment.
    The Characterstic Value in report should be blank if no value is assiged to it....right now it is displaying as 'NOT ASSIGNED' my requirment is to display blank if there is no value isted of not assigned
    How can i achieve this
    Thanks

    Hi,
    To achieve this issue, we need to replace the value of ‘#’, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu. Click on the ‘Object Overview’ to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
    Now you will be able to see the object overview on the right side of the screen. Note the field names which are necessary and go to SE11 to view the contents of the selected table.
    Now click the execute button or press ‘F8’ to view the records.
    Now go to Tcode: SE38. Create a source code and give some program name for that source code.
    Tocreate a program here in SE38, you need to have access key. If you don't have the same, contact BASIS for this.
    Now write the below code for that particular table(Characteristic) in which you want to change the value ‘#’ to description ‘Blank’. In the below source code, we are updating particular table, setting the field as ‘Blank’ where it is null or no value. Here the field will automatically get updated to ‘#’ if there is no value or null.
    update /BIC/PXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXX is null or /BIC/ZXXXX = ' '.
    if sy-subrc eq 0.
    write 'successful'.
    commit work.
    else.
    write 'unsuccessful'.
    endif.
    Also find the below thread which may help u...
    Replace  *  with blank in transfer rule.
    Hope this helps u...
    Regards,
    KK.
    Edited by: koundinya karanam on Apr 21, 2008 7:14 PM

  • Full data is not being display in report for "LANGUAGEINDEPENDENT_EXTENDED_Text" type field

    Hi
    I have extended Opportunity BO with a field type LANGUAGEINDEPENDENT_EXTENDED_Text", then I have enhanced my datasource and report.
    for this field I have entered value almost 100 characters but in report only 60 character is being shown.
    Could anyone help me how to bring whole value in report as it is in database.
    Thanks
    Sunil Maurya

    Hi Sunil,
    As per your requirement in reports only display 60 characters.
    We have similar requirement to display more than 1000 character in report but this is not possible in report
    Please check this discussion :
    Add 'notes'-field in report
    Regards,
    Mithun

  • WHT amount not appearing in FBL1N report for Document type RE

    Dear Friends,
    While running FBL1N report for any vendor where TDS is applicable, the WHT amount is appearing for KR document type. But when it is RE document type the WHT amount is not appearing in the report. How can we resolve this? Any enhancement/any note to be applied?
    Regards,
    Ramkumar

    Hi,
    FBL1N is having the classic withholding tax field hence please don't refer the those fields.
    please don't refer those fields.
    Please review attached note 363309 for detailed explanation.
    BSEG-QBSHB is designed to fill for the classic withholding tax. And
    extended withholding tax information is stored exclusive in table
    WITH_ITEM.
    You can check in table BSEG for the fields and will find that system
    do NOT update field BSEG-QBSHB.
    In your line layout,you define a field BSEG-QBSHB. But actully the field
    of vendor/customer line item is filled with zero from FI. Thus,it shows
    zero in line item display.
    And as note 363309 says,
    "Remove the field which contains the withholding tax information
    from your display variant.
    If you want to display the withholding tax information, double-click on
    the document number and subsequently choose 'Withholding tax'."
    Regards
    Madhu M
    Edited by: M Madhu on Jan 18, 2012 9:13 AM

  • Problem in Report for Sending Email

    I  have created report for sending the email. When i execute, which is the transaction to chec the email outbox for cheking the email contents?
    please let me know.

    Actually there are couple: check SO01 and SBWP
    Regards
    Marcin

  • Report for Attribute Usage !!

    Hi All,
    As per my customer requirement, Need to show the below attributes in Report.
    Attribute Type
    Attribute Name
    Attribute Subject Area
    Attribute folder
    Attribute path
    Attribute description
    Attribute creation
    Attribute last modification
    Report usage
    All these columns need to fetch from repostiory & catalog. Please guide me on this task.
    Thanks in Advance !!

    You need to enable usage tracking that would help some level.
    Search in the net to get how to config it.
    if helps mark
    ~ http://cool-bi.com

  • 'Not Assigned ' value in Report

    Hi,
    I have my Admin Cockpit report which shows # values for TIMESTAM values. The timestamp are for Last load, last Aggregation, Last Compresstion of the cubes.
    the Data flows from Virtual Cube> MultiProvider > Query.
    I can see that the relevant data is available in Virtual cube, but the Multiprovider is showing values to ZERO.
    Multiprovider shows appropriate Timestamps for DSOs but not cubes.
    In query the result rows are 'Always' Suppressed.
    Please let me know that at which stage the data is missing. Since it has Virtual Cube it extracts data Run time, how to remove this # values then.

    Hi Pranil,
    It's nice you solved your own problem.
    I request to close this thread by clicking answered link. So, that others can get a chance.
    PS: When ever you create a multiprovider the identification of the Keyfigures and Char's is mandatory. If you didn't maintain this then you won't get data or you will get wrong data.
    Thanks & Regards,
    Ravi Kanth

  • Database connection not working in Crystal Reports for Eclipse 2.0

    Hello All,
    We have several hunderd reports that were created in CR 8.5.  We are moving to a new Java  environemnt and we are also considering using BIRT.However to save development time and effort we are considering using the CR for Eclipse 2.0. For a proof of concept, we loaded several of our 8.5 reports into Crystal reports XI, saved them, and then loaded them into our CR for eclipse design environment.
    These reports were built from the values returned from a store procedure.. When we try to execute the reports from within Eclipse, we get  Error finding JNDI name (xxxx). We have created the appropriate datasource (to Sybase 12.5.4), and the schema is viewable in the db explorer. However when we associate the connection to this datasource, the connection no longer appears in the field explorer and no data is returned upon previewing the report.
    The original reports used ODBC to access the database. Is there anyway to easily convert these reports to using the Sybase JDBC datasource? Also in the DB explorer, the SPs are only showing the SP parameters,not the return values, so we are unable to easily drag the return fields onto the report to reset the links.
    Thanks in advance
    Edited by: Michael Knight on Oct 7, 2009 1:46 PM

    Michael,
    We had a similar situation but from my reseach the output from the stored procs cannot be viewed in the report designer in Eclipse. So we had to design the reports using the Crystal Reports Devloper application (the stand-alone version, not the Eclipse editor). The reports were designed w/an ODBC datasource. In order to get that working we had to create a JNDI JDBC datasource connection w/the exact same name as the ODBC datasource and that works. For example, the ODBC datasource was named OP01DSDB01.WORLD so we just created a JNDI datasource w/that exact same name (no jdbc/OP01DSDB01.WORLD just OP01DSDB01.WORLD). I'm not sure if there is a workaround for any of this but this was the easiest way to get them working.
    I know this isn't the ideal situation, but that was the easiest way to get things working.

  • Add-Ins menu not visible in Crystal report for Sap Business One

    Hi,
    I have installed the Crystal Report Design for Sap Business One on my customer server.
    But when I open the Crystal Report I can't see the Add-Ins menu to put the rpt directly on my Sap Business One.
    I have installed it on many customer, but only with this I have this type of problem.
    There is some restriction on Sap Version/Patches or Authorization Users or some check that I have to set on Sap or on Crystal Report?
    Regards
    Marco

    Hi All,
    i have the same issue on crystal report add-ins. Have you able to solve this without upgrading our sap business one to the latest version or patch level? Please see details below.
    OS: MS Windows 7 SP1
    SAP Business One 8.82 pl7
    Crystal report 2011
    Crystal report integration package installed under B1_SHare/Client
    But still the problem persist on the workstation.
    Please help me solve this problem.
    Thank you,
    ana

  • Not able to pull report for only 2 months Jan and Feb of 2014

    I am not able to pull the report from Service Manager DWH for the months Jan and Feb of 2014. on attempting i am getting the below screenshot of error
    and the content of the same is:
    Date: 29-04-2014 15:31:04
    Application: System Center Service Manager Console
    Application Version: 7.0.6555.0
    Severity: Error
    Message: An error has occurred during report processing.
    System.Exception: An error has occurred during report processing. ---> System.Exception: Query execution failed for dataset 'Data_Incidents'. ---> System.Exception: For more information about this error navigate to the report server on the local server
    machine, or enable remote errors
       --- End of inner exception stack trace ---
       --- End of inner exception stack trace ---
       at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
    System.Exception: Query execution failed for dataset 'Data_Incidents'. ---> System.Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors
       --- End of inner exception stack trace ---
    System.Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors
    Further troubleshooting i ran the query
    USE DWDataMart1
    SELECT * FROM sysobjects
    WHERE name like 'ServiceManager_Report_%'
    and found out that below mentioned 8 of Stored procedure is missing, i am not sure if this has something to do with the error
    ServiceManager_Report_ReleaseManagement_SP_GetAllActivitiesOfReleaseRecord
    ServiceManager_Report_ReleaseManagement_SP_GetListOfReleaseRecords
    ServiceManager_Report_ServiceManagement_SP_GetCMCollectionContainsComputersMap
    ServiceManager_Report_ServiceManagement_SP_GetOMGroupContainsComputersMap
    ServiceManager_Report_ServiceManagement_SP_GetServiceContainsComputersMap
    ServiceManager_Report_ServiceManagement_SP_GetSMServiceGroupData
    ServiceManager_Report_ServiceManagement_SP_GetSMServiceSummaryData
    ServiceManager_Report_Common_SP_GetServicesAffectedByWI
    kindly help me in resolving this issue..
    thanks in advance
    Micheal Nishit

    looks like your data warehouse install is borked. unfortunately there's not much more we can determine based on this. you're obviously missing a lot of the stored procedures that service the default reports, but there isn't any reasoning. 
    The error from above is the generic "a bad thing, recorded elsewhere, has occurred" that you usually get from Web Services. Try running the report from the DW machine to see if you get better error details, or
    enable remote errors.

  • Solman system not shown RCA Change reporting for ABAP_Transport store

    Hi,
    We have configured RCA in Solman system.
    We try to get Change reporting comparison of ABAP_transport for Dev and
    Qas system.
    But it shows error as Different technical system in Reference and CustomValue.
    SAP Solution Manager 7.01 SP20
    Regards,
    Karthik

    Jansi,
    After selecting my QAS and DEV system in System Analysis for Change Reporting.
    Select ABAP_Software(6store) of both system and then i click Comapre
    And the status displayed as u201Cu2260u201DChanges were detected of Dev system, then i select the Dev system showing
    Name                                                                 Reference Value                          Status                         Custom Value Details
       ABAP-SOFTWARE
       ABAP_NOTES
       ABAP_PACKAGES
       ABAP_SWITCH_FRAMEWORK
       ABAP_TRANSPORTS                                Different Technical System    Not allowed/Not Relevant    Different Technical System
    I am comapring ABAP_Transport of QAS and Dev system. but its showing  not relevant status.
    Regards,
    Karthik

Maybe you are looking for