Deploy multiple times with one set of bean classes?
Let's say I have MyBean, MyBeanHome and MyBeanImpl. Is it OK if deploy them
twice as follows (ejb-jar.xml). Notice the difference in ejb-name. Then in
the weblogic-ejb-jar.xml I define certain attributes differently, such as
clustered or not.
Thank,
Bill
<session>
<description>My Session Bean</description>
<ejb-name>MyBean</ejb-name>
<home>myco.myserver.MyBeanHome</home>
<remote>myco.myserver.MyBean</remote>
<ejb-class>myco.myserver.MyBeanEJB</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
<session>
<description>My Non-clustered Session Bean</description>
<ejb-name>MyBeanNC</ejb-name>
<home>myco.myserver.MyBeanHome</home>
<remote>myco.myserver.MyBean</remote>
<ejb-class>myco.myserver.MyBeanEJB</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
Two beans with the same bean and interface classes, may be deployed as different
beans if
the <local-jndi-name/>
or <jndi-name/> in the weblogic-ejb-jar.xml is different.
thanks,
Deepak
"Bill" <[email protected]> wrote:
Let's say I have MyBean, MyBeanHome and MyBeanImpl. Is it OK if deploy
them
twice as follows (ejb-jar.xml). Notice the difference in ejb-name. Then
in
the weblogic-ejb-jar.xml I define certain attributes differently, such
as
clustered or not.
Thank,
Bill
<session>
<description>My Session Bean</description>
<ejb-name>MyBean</ejb-name>
<home>myco.myserver.MyBeanHome</home>
<remote>myco.myserver.MyBean</remote>
<ejb-class>myco.myserver.MyBeanEJB</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
<session>
<description>My Non-clustered Session Bean</description>
<ejb-name>MyBeanNC</ejb-name>
<home>myco.myserver.MyBeanHome</home>
<remote>myco.myserver.MyBean</remote>
<ejb-class>myco.myserver.MyBeanEJB</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
Similar Messages
-
Controlling multiple videos with one set of controls
I'm currently working on a project that allows the user to view multiple videos at one time. The videos will be exactly the same length and video format/type. I'd like to let the user use just one set of controls to view each video. Is this possible? If so, does anyone have any code samples?
I also want the video to not start when the application starts. I've got that done, but I'd also like the first panel of the video to be displayed. How can I do that?
Thanks!PS, I'd also prefer for the controls to be detatched from any of the viewers, if possible. Thanks!
-
I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP. -
Select or deselect multiple rows with one single selection event
Does anyone know how to create a JTable which can select or deselect multiple rows with one single selection event in JTable. Fore example, if the table has
row1
row2
row3
row4
row5
row6
What I need is when user select row1 or row2, both row1 and row2 should be set to be selected. Then if user press CTRL and click one of row3 or row4, both of them should be selected including the previouse selected row1 and row2.
For deselection, if row1 and row2 are selected, when users deselect one of row1 or row2, both of them should be deselected.
Hopefully someone can give me a hint.Here is a partial solution using a JList. Only one line gets highlighted when the user makes a selection in the list. But, two lines are returned. There is a blank line between every two lines.
private void addLineToList() {
String a = f_one.getText();
String b = f_two.getText();
if (a.length() == 0) {
Utils.showInformationMessage("Item field is empty.");
f_one.requestFocusInWindow();
return;
if (b.length() == 0) {
Utils.showInformationMessage("Match field is empty.");
f_two.requestFocusInWindow();
return;
model.addElement("item: " + a);
model.addElement("match: " + b);
model.addElement(" ");
int size = model.getSize();
pairList.setSelectedIndex(size - 3);
f_one.setText("");
f_two.setText("");
f_one.requestFocusInWindow();
private void editList() {
if (pairList.getSelectedValue().toString().equalsIgnoreCase(" ")) {
Toolkit.getDefaultToolkit().beep();
f_one.requestFocusInWindow();
return;
if (!f_one.getText().equals("")) {
int result = JOptionPane.showConfirmDialog(this,
"The Item field contains text. Replace the text?",
"Flash Card Activity", JOptionPane.YES_NO_OPTION,
OptionPane.INFORMATION_MESSAGE);
if (result == JOptionPane.NO_OPTION) return;
if (!f_two.getText().equals("")) {
int result = JOptionPane.showConfirmDialog(this,
"The Match field contains text. Replace the text?",
"Flash Card Activity", JOptionPane.YES_NO_OPTION,
JOptionPane.INFORMATION_MESSAGE);
if (result == JOptionPane.NO_OPTION) return;
String item = "";
String match = "";
int index = pairList.getSelectedIndex();
String choice = model.getElementAt(index).toString();
if (choice.startsWith("item")) {
item = choice;
match = model.getElementAt(index + 1).toString();
model.remove(index);
model.remove(index);
model.remove(index);
else {
item = model.getElementAt(index - 1).toString();
match = choice;
model.remove(index + 1);
model.remove(index);
model.remove(index - 1);
int size = model.getSize();
if (size > 2) {
pairList.setSelectedIndex(size - 2);
f_one.setText(item.substring(6));
f_two.setText(match.substring(7));
f_one.requestFocusInWindow();
} -
Can i install itunes multiple times on one computer for multiple users?
Can i install itunes multiple times on one computer for multiple users?
Like most applications you only need to install it once for it to be available to all users. (That said it is possible to install an application and only make it available to the current user, but that's rarely needed.)
tt2 -
Create multiple folders with one click on documents tab in BP in SAP CRM
Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved. -
When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine in my house, but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server. Do I take it back?
Where is everyone???? Does anyone have an answer???
Allik1 -
Multiple iPhones with one one computer
I was using multiple iPhones with one one computer, each iPhone device has it's Owen Apple ID. When I connected my device. I got my mothers photos, contacts & applications. All my applications are deleted, is there a way to retrieve my iPhones photos and applications ?
Sign out of your mom's account in itunes, then sign in with your account, then restore your phone from your itunes backup.
-
Running the same code multiple times with different paramters automatically
Hi guys,
I want to run the same code multiple times with different paramters automatically. Actually, I am doing some sample scans which takes around 2 hours n then I have to be there to change the paramters and run it again. Mostly I do use folowing paramters only
X_Intial, X_Final, X-StepSize
Y_Intial, Y_Final, Y-StepSize
Thanks,
DushyantAll you have to di is put all of the parameters for each run into a cluster array. Surround your main program with a for loop and wire the cluster array through the for loop. A for loop will autoindex an input array so inside the for loop you just have to unbundle the cluster to get the parameters for each run.
Message Edited by Dennis Knutson on 07-13-2006 07:50 AM
Attachments:
Cluster Array.JPG 9 KB -
Multiple selections to multiple layers or multiple files with one go ?
Hi,
how to convert multiple selections to multiple layers or multiple files with one go ?
Thanks!You may want to ask over at
http://forums.adobe.com/community/photoshop/photoshop_scripting?view=discussions
or
http://ps-scripts.com/bb/
I think there are Scripts about for the task or at least ones that could be adapted without too much problems.
The usual approach is, I think, creating a Work Path from a Selection and then using (expanded) Selections based on the individual subPathItems to intersect with the original selection.
Of course there are possibilities for bad results … -
Photoshop crashes while using multiple windows with one image
Has anyone else encountered the following problem:
Photoshop CS4 crashes sooner or later when working with multiple windows with one image (window->arrange->new window for...).
I remember having same problem since CS2. Is this a bug in Photoshop or am I having a bad luck?
Technical specifics:
Ps CS4, iMac, 21.5, 10.6Don't know. I haven't heard of other people having that problem.
Do you have a crash report I could look at?
Or have you attached your email to crash reports sent to Adobe and can you tell me the date on one of them? -
Create multiple delivery with one invoice
Hi all,
can you tell me how to do multiple delivery with one invoice,
i tried in vf01 by giving their my 3 delivery nos but it is generating three invoices
pls explain this in details
points will be rewarded
regards,
smmmmmmDear Sameer
As per your requirement run the Tcode VF04 (Billing Due list) and select the Delivery Documents for which you want to to have single Billing Document by clicking on Collective Billing document/Online Push Button in that screen.
To Have Single Billing Document for Multiple Delivery you need to have Payer,Terms of Payment,Incoterms(part 1 and part2) same for all materials orelse the billing document will split and this split analysis is visible during creating of Billing document.
Hope this will help you in solving your problem.
Regards
PSH -
How to Insert more than one record at a time- with fixed set of values in one field
Can someone guide as to how to insert multiple records at a time using ASP VBScript in Dreamweaver CS4 or ADDT.
If someone can guide then the exact problem is given below.
I have a MS access database with one table. The table has three fields. The first field is an autonumber field for ID number.
The second field contains string values- One out of 7 predefined values. One set of records consists of 7 records containing all the seven types of predefined values in fields no 1.
The third field is a numeric field and can contain integers.
I want that the user can enter data for the table using an ASP form in such a way that he enters one set of records at a time in one single screen. This way he will not have to remember that he has /has not entered all the seven set of values for the field no 1.
I am not creating fields with the 7 types of field1value as their names as it will increase the number of fields drastically.
Please help for dreamweaver ASP VBScript.I have successfully inserted seven records in one form submit operation by looping through the command object execute method.
However, the data that is being inserted by the command object is repetition of the first record and the command object is not taking any data from the text boxes for the second record onwards. In this I had used the isert record behavious generated by DW CS4 and modified it to suit my requirement. However, the data inserted in the first row is getting repeated in all the seven rows.
Please help.
Also advise if there are any free dreamweaver server side validation extensions available. -
Multiple wake-up times with pm set
Hello, I have a question. I have 2 workflows that I have built through automator. I want them to start everyday at 4:00 and the other one to start at 22:00. The problem is that at those times, my mac would be asleep (or completely off) and automator would not run in those scenarios. I know the energy saver under system preferences has an option to wake up the computer but the problem is that it only gives me 1 option. So, I can either turn it on at 3:58 or at 21:58. I need to figure out how to get multiple wake up times for the mac (without purchasing any software).
I have read some things on the internet about Pm set that would allow you to accomplish that. The problem is that I don't know how to use it. Is there a way to safely set this up with pm set? I have opened the terminal but I don't know how to use it. any help would be appreciated.
Thanks.
By the way, I am using the latest Imac model 2.7 GHz Intel Core i5 with OSX 10.8.3Does it have to run at exactly 0400 and 2200, or can it run after it wakes from sleep after that time?
If that is the case, you may want to look at creating a launchctl plist to have it run whatever you want at those times. launchd will run them as soon as it wakes up after the scheduled time (or at that time if it is awake).
There are quite a few examples online, but Lingon makes it pretty easy to create the plist and schedule the events. Even with Lingon, you would want to read up on launchd: http://developer.apple.com/library/mac/#documentation/MacOSX/Conceptual/BPSystem Startup/Chapters/CreatingLaunchdJobs.html
An example using Lingon: http://nathangrigg.net/2012/07/schedule-jobs-using-launchd/ -
How do I create multiple TEBs with one submit button on one page in Captivate 7
I've read other posts on this topic (which refer primarily to earlier versions of Captivate) and am still at a loss as to how to put multiple text entry boxes on a page with one submit button. Here's my scenario:
I am creating test questions.
Each test question has multiple text entry boxes (for numbers only).
Student should be able to enter numbers into the textboxes in any order.
Then there is one Submit button that should initiate validating all the text entries, and move to a scoring page (so I can test it). (What would be best is if this button not only did the above, but also submitted scores to the LMS. But that is not my question at this time.)
I'd like this question to be set up as a template so that I can duplicate it, be able to add or delete text boxes and change the values required in the text boxes.
Here is an image of a sample question page with multiple TEBs. The yellow boxes tell the student where they need to enter text:
Any help or direction to help is appreciated!!I think the problem here is that Arlhoolie wants all of the different TEBs to behave as if they were part of a single interaction that submits only ONE result to the quiz. Using multiple TEBs in Captivate means that you have multiple scored objects and therefore multiple results being submitted to the quiz.
If you want a single Success or Failure result submitted to the quiz based on the results from multiple interactive objects then there really is no simple way to do it. But you could try using the Infosemantics Interactive Master widget to combine all the TEBs as slave objects that report to the Master Widget, which then reports a single score to the quiz based on the results from the slave objects.
You can learn more about the Master widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/interactive-master
http://www.infosemantics.com.au/interactivemaster/help
You can download a free trial version of the widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
One caveat you should be aware of is that this widget is not HTML5 compatible.
Maybe you are looking for
-
G50 won't switch to external display
I've updated the Intel video driver to the latest, 6.14.10.4277, but I still can't get my external display to work with my G40 through the external VGA connector. The display works with my R40, but not with my G40. It doesn't even show anything dur
-
How to get only partial text of a paragraph into the table of content?
Hi guys, currently I'm working on a manuscript based on the publication manual of the American Psychological Association. Unfortunately, there is some sort of heading that's placed right in front of further text. Here an example: +This is my heading.
-
Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffamazonhot/content/lib/Extension.debug.js Line: 366"]
-
Hi, in our RAC environment, we are enabling egach instance in RESTRICT mode to block incoming connections. But we need specific users to login with restricted session privilege. This is okay with single instance, but with RAC, all users cannot connec
-
1st Generation iphone, 2.1 iPhone OS and password incorrect exchange prompt
I have a 1st generation (non 3G) phone and I upgraded to 2.1 (5F136) recently. Dont exactly remember when I upgraded the OS. All of a sudden, I am getting password incorrect exchange prompts. What the **** is happening? The password is correct and I