Deploy war-files on application server 6.40?

Hello,
when i try to deploy war-files direct from sap netweaver developer studio 2.0.5 it is not possible. It is possible to deploy a war-file direct on the application server by an tool?
Thanks,
Frank

The RemoteGui.bat is a GUI client for the SDM tool, which is the same tool that you use when deploying from the Developer Studio. So, the answer to your question is again no, you must pack your application into an EAR to deploy it on the server.
However, you can use the Deploy Tool that comes with J2EE Engine to deploy a J2EE application module. For more information, see the following documentation: http://help.sap.com/saphelp_nw04/helpdata/en/55/600e64a6793d419b82a3b7d59512a5/frameset.htm
Zornitsa

Similar Messages

Error when deploying war file into application server

I wrote a web service in java using RAD and managed to check it using a web service client with no errors.
However, after creating a war file and tried to deploy this into the Sun application server, the following can be seen at the application server console:
Deploying application in domain failed; Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception ; requested operation cannot be completed Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
In the server.log file, the following appears:
loyment|_ThreadID=13;|DPL5035:Error while running ejbc
com.sun.enterprise.deployment.backend.IASDeploymentException: Fatal Error from EJB Compiler -- j axrpc compilation exception
at com.sun.enterprise.webservice.codegen.JaxRpcRICodegen.accept(JaxRpcRICodegen.java:206 )
at com.sun.enterprise.deployment.WebBundleDescriptor.visit(WebBundleDescriptor.java:1101 )
at com.sun.enterprise.deployment.Application.visit(Application.java:1346)
at com.sun.enterprise.webservice.codegen.JaxRpcRICodegen.run(JaxRpcRICodegen.java:103)
at com.sun.ejb.codegen.IASEJBC.doCompile(IASEJBC.java:785)
at com.sun.ejb.codegen.IASEJBC.ejbc(IASEJBC.java:563)
at com.sun.enterprise.deployment.backend.EJBCompiler.preDeployModule(EJBCompiler.java:42 7)
at com.sun.enterprise.deployment.backend.EJBCompiler.compile(EJBCompiler.java:213)
at com.sun.enterprise.deployment.backend.ModuleDeployer.runEJBC(ModuleDeployer.java:967)
at com.sun.enterprise.deployment.backend.WebModuleDeployer.deploy(WebModuleDeployer.java :193)
at com.sun.enterprise.deployment.backend.ModuleDeployer.doRequestFinish(ModuleDeployer.j ava:140)
at com.sun.enterprise.deployment.phasing.J2EECPhase.runPhase(J2EECPhase.java:146)
at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.ja va:71)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentS ervice.java:633)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService. java:188)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService. java:520)
at com.sun.enterprise.management.deploy.DeployThread.deploy(DeployThread.java:143)
at com.sun.enterprise.management.deploy.DeployThread.run(DeployThread.java:172)
|#]
[#|2007-11-14T11:21:10.083+0930|INFO|sun-appserver-ee8.1_02|javax.enterprise.system.tools.deploy ment|_ThreadID=13;|Total Deployment Time: 14145 msec, Total EJB Compiler Module Time: 0 msec, Po rtion spent EJB Compiling: 0%|#]
[#|2007-11-14T11:21:10.116+0930|SEVERE|sun-appserver-ee8.1_02|javax.enterprise.system.tools.depl oyment|_ThreadID=13;|Exception occured in J2EEC Phase
com.sun.enterprise.deployment.backend.IASDeploymentException: Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
at com.sun.enterprise.webservice.codegen.JaxRpcRICodegen.accept(JaxRpcRICodegen.java:206 )
at com.sun.enterprise.deployment.WebBundleDescriptor.visit(WebBundleDescriptor.java:1101 )
at com.sun.enterprise.deployment.Application.visit(Application.java:1346)
at com.sun.enterprise.webservice.codegen.JaxRpcRICodegen.run(JaxRpcRICodegen.java:103)
at com.sun.ejb.codegen.IASEJBC.doCompile(IASEJBC.java:785)
at com.sun.ejb.codegen.IASEJBC.ejbc(IASEJBC.java:563)
at com.sun.enterprise.deployment.backend.EJBCompiler.preDeployModule(EJBCompiler.java:42 7)
at com.sun.enterprise.deployment.backend.EJBCompiler.compile(EJBCompiler.java:213)
at com.sun.enterprise.deployment.backend.ModuleDeployer.runEJBC(ModuleDeployer.java:967)
at com.sun.enterprise.deployment.backend.WebModuleDeployer.deploy(WebModuleDeployer.java :193)
at com.sun.enterprise.deployment.backend.ModuleDeployer.doRequestFinish(ModuleDeployer.j ava:140)
at com.sun.enterprise.deployment.phasing.J2EECPhase.runPhase(J2EECPhase.java:146)
at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.ja va:71)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentS ervice.java:633)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService. java:188)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService. java:520)
at com.sun.enterprise.management.deploy.DeployThread.deploy(DeployThread.java:143)
at com.sun.enterprise.management.deploy.DeployThread.run(DeployThread.java:172)
|#]

I got a similar error deploying to Weblogic with JBuilder 6 and it proved to be
the Manifest.mf file inside war, which is very sensitive to CLASSPATH entry. Finally
I used the file generated by JBuilder and it worked ...
Stefan
Frank Sun <[email protected]> wrote:
Hi, this is Frank.
I have a war file and want to deploy it. but somehow I got java.lang.StringIndexOutOfBoundsException:
String index out of range: -1
error
Would anyone please help me?
This war file is able to be deplyed using Tomcat 4.0.3.
Please help.

Deploy war file to JBOSS server

I have a simple project called "Test" which just has a "System.out.println" statement. After I build it, I Exported the war file to "{install dir}\JBOSS\jboss-4.0.0\server\default\deploy". when I ran the project at "//localhost:8080/Test". I got the following errors in the JBOSS server window:
2005-01-29 15:21:21,131 ERROR [org.jboss.web.localhost.Engine] StandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.lang.NoClassDefFoundError: javax/servlet/jsp/jstl/core/Config
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:140)
     at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:186)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:44)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:169)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:595)
2005-01-29 15:21:21,242 INFO [STDOUT] Connected to server
2005-01-29 15:21:21,242 INFO [STDOUT] socket closed
do you know how to fix it? Thanks.

The project I'm working on has two part:
- Web application (a war file)
- Enterprise application (an ear file)
I tried to merge them to one part and make the web application a web module of the enterprise application. I deployed the war into the ear file and the web application can be accessed successfully on my local testing machine. However, when I deploy the ear file on the server, I couldn't access to the web application anymore. Any explanation/solution would be appreciated.
Thanks,
Chuottui.

Problem deploying Creator War file in Application Server 8.1

I want to get my Creator app created using Linux to run on a Windows XP machine running Sun Java System Application Server 8.1.
I thought this would be straight forward as this is the server used in the IDE and both come with PointBase. No such luck.
The app starts up but trying to go to the login page which has a database connection I get HTTPStatus 500 exception
javax.servlet.ServletException: javax.faces.FacesException: javax.faces.FacesException: Can't instantiate class: 'myproject.Login : javax.faces.FacesException: java.sql.SQLException: JdbcRowSetXImpl (connect): (JNDI) Unable to connect: Signon not found
Signon is the PointBase database name and I can ping the database connection.
Is there a step by step How-to to get a Creator app running on SJSAS 8.1 on an external machine?
I used admin console to set up JDBC resources and connection pools and edited the sun-web.xml file to include
<sun-web-app xmlns="http://java.sun.com/xml/ns/j2ee">
<context-root>/myproject</context-root>
<resource-ref>
<res-ref-name>jdbc/Signon</res-ref-name>
<jndi-name>jdbc/Signon</jndi-name>
</resource-ref>and the web.xml file includes
<resource-ref>
    <description>Rave generated DataSource Reference</description>
    <res-ref-name>jdbc/Signon</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
</resource-ref>Can anyone tell me what I've missed out?
Thanks in advance for any suggestions.
John

Hi,
Please take a look at the sample application JAAS Authentication at
http://developers.sun.com/prodtech/javatools/jscreator/ea/jsc2/learning/tutorials/index.html
Hope this may help you
regards
MJ

Getting an error while deploying war file into weblogic serve

Hi All,
We have build a sample war file from JDeveloper11.1.1.6.0 tool (which is java based web service).
And we are trying to deploy into the WebLogic(10.3.6) Server using Ant scripts(apache-ant-1.8.4) from command prompt.
While doing this getting an bellow error :
[wldeploy] Task 0 initiated: [Deployer:149026]deploy application ViewController
on AdminServer.
[wldeploy] Task 0 failed: [Deployer:149026]deploy application ViewController on
AdminServer.
[wldeploy] Target state: deploy failed on Server AdminServer
[wldeploy] java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
[wldeploy]
[wldeploy]
[wldeploy] Target Assignments:
[wldeploy] + ViewController AdminServer
BUILD FAILED
D:\JDeveloper_Practice\otn\otnapp\ViewController\deploy\build.xml:50: weblogic.D
eployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException:
Task 0 failed: [Deployer:149026]deploy application ViewController on AdminServe
r.
Target state: deploy failed on Server AdminServer
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
Could you please help me on this, if anyone know the solution.
Thanks & Regards,
Ramesh.

Hi Ramesh,
Try to include faces jars with in your classpath.
It talk about the " java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet"
you check for this blog which help to say about this issue using JDev.
http://andrejusb.blogspot.in/2009/10/how-to-solve-javalangclassnotfoundexcep.html
Regards,
Kal

Deploying PLL file in Application Server (oracle IAS10g) VERY URGENT

Hai,
I have some doubts abt PLL files.(PL sql Libraries)
I tried to use PLL in Windows and it runs fine.
When I tries to use that pll on Linux Advanced Server 3 using Oracle IAS10g, The Function in the pll is not accessible.
What am I doing wrong??
1.In Which path I have to deploy the PLL file
2. Is the PLL file is compiled
3. How to make a Linux Version out of it?
Our Pll file name is ENCRIPT1.pll
Th error message is
PL/SQL ERROR 201,...
identifier ENCRIPT1 must be declared
Please Help
IT IS VERY URGENT

hai
As u said, We have compiled the pll file in linux application server The compilation of the pll file was successful. And then compiled the form in linux application server. But still the same problem occurs. We have also checked the case sensitivity. Actually the form is working very well in the Wndows machine.
The error is
identifier ENCRYPT MUST BE DECLARED
PLSQL ERROR 201

How to change SessionTimeOut value after deployed war file in SunAPP Server

Hi Guys,
Any one can help and give some guidence How i can change the session time out value in web.xml after deployed the file on sun one application server.This is the code given below which i have to change the time of session from 5 minutes to 1 minute.
<session-config>
<session-timeout>5</session-timeout>
</session-config>
Regards,
Suresh.Babu.Ramagani.

For SunOne session configuration is in the sun-web.xml.
http://docs.sun.com/app/docs/doc/820-2207/abxcz?a=view
-steve

Getting an error while deploying war file on Weblogic Server Admin Console

I am getting following error --
Unexpected Exception
An unexpected exception has occurred processing your request
Message:
Stack Trace: java.lang.NullPointerException at com.bea.console.actions.app.install.Flow.uploadApp(Flow.java:256) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870) at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306) at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336) at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52) at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044) at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:64) at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184) at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:50) at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:58) at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116) at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:255) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853) at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631) at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158) at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256) at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414) at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133) at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199) at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686) at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142) at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:106) at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111) at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181) at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167) at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225) at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352) at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199) at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:54) at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3502) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(Unknown Source) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2186) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2092) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Please help !!
Thanks in Advance

Hi,
please follow the below link ...u will get some idea about " java.lang.OutOfMemoryError: unable to create new native thread"
http://weblogic-wonders.com/weblogic/2009/12/30/jvm-crash-and-native-outofmemory/

Deploying war file on iplanet application server 6.5

Hi ,
We are trying to deploy WebObjects application on Iplanet Application server server 6.5.
Steps we tried for deployment :
1) War file generated by WebObjects.
2) Started IPlanet Application server.
3) Opened the War file in the deployment tool.
4) Verified that the WAR file to be deployed using the verify option in the deployment tool(Verified successfully)
5) We tried to save the archive, then it throws an error saying "
"Invalid entry compressed size (expected 52 bytes but got 51 bytes)".
We ignored this message and proceeded further by clicking on OK.
6) Deployed the WAR file using the deploy option
7) In the deploy message box, it diplays that the application was deployed successfully.
Then we tried to access the application by trying the following url : " http://localhost/NASApp/<CONTEXT NAME>/WebObjects/<APPLICATION NAME>"
(eg : http://localhost/NASApp/SampleApplication/WebObjects/SampleApplication.woa>)
We are getting the error saying that " GXError". We are not sure whether the the above mentioned url is the correct way to access the application !
What we think the problem in deployment is
i) because of error while saving the WAR file (Invalid entry compressed size (expected 52 bytes but got 51 bytes)
ii) URL not appropriate
Other observations :
We tried to deploy to deploy sample application on Iplanet Application server. All these sample applications are deployed properly without the above mentioned error message. All these application are accessed by typing following url : " http:localhost/NASApp/<CONTEXT NAME>/<APPLICATION NAME>". IN all the sample application, url contains "NASApp" . We are not sure what this stand for and maps to. What we assumed is that it maps to the the iplanet app document root i.e "installedroot/ias6/ias/App"
The exception throw while saving the WAR file is " com.iplanet.ias.tools.buzz.util.ArchiveHandlerException"
Has any body who has tried this can help us?
Thanks,
Raju and Venkatesh

Hi,
First of all the application you are trying is from a WebObjects application server. I don't know how they package the modules and what is the format/file structure. I just went to their site, though they say that the WebObjects applications can be deploy on any J2EE Application server but still how they package and how they write the xml descriptors is not known.
Looking at your exception it seem that first it is something to do the war/jar archive file compression thing (as the deployment tool is not able to read the complete file) then comes the deployment descriptors.
I tried to get a few sample application from their site but I couldn't fine any, it will be great help if you can provide a WebObjects sample app to me (mail it to [email protected]).
Regarding the NASApp string in URL, it has nothing to do with document root of iAS and also installedroot/ias6/ias/APPS dir is not the document root of iPlanet app server, this is the place where it save/explodes all the archives (ear).
See iPlanet App server don't have any HTTP daemon to listen to the HTTP requests, so it needs a web server with a plugin (web connector) to forward the HTTP requests meant for iAS, and this NASApp string in the URL is the key to that.
All the URLs are first send to the iAS plugin (as configured in web server's obj.conf file) and plugin look for this NASApp string (configurable), if it is there in the URL then it converts the HTTP request and send it to iAS over a proprietary protocol (KCP), otherwise it gives the request as it is to web server to process it.
The NASApp string is a iAS registry parameter which you can change any time. And generally the context root part of the URL is the war file name (by default). So the typical URL for any web application (MyWeb.war) will be:
http://<host>:<port>/NASApp/MyWeb/<Servlet_name>.
I don't know why that extension "*.woa" is there. So if you send me a sample war file, I will be able to try it out.
Please feel free to ask further questions.
Sanjeev,
Developer Support, Sun ONE Application Server-India.

How to deploy a war file on Weblogic Server 7.0??

Hello Everyone
I am trying to deploy a servlet on Weblogic Server 7.0 as a WAR file. Can anyone of u plz tell me the steps required to do that. I am posting this question on EJb forum and not on servlets coz this is not a servlet problem, rather this is something which is related to J2EE, ie how to deploy a war file on J2EE Server.
This is how i have done it, but this is not working---
(1) First i created a directory structure for the web application according to J2EE Specification.
C:\Work\
myServletWAR\
META-INF\
WEB-INF\
classes\
HelloServlet.class
web.xml
i.e within work directory, there is a dic called myServletWAR which is my application directory which contains 2 sub directories viz META-INF which contains the mainifest file being generated by the jar utility. the second directory in the myServletWAR application dir is WEB-INF, which contains one file called web.xml for servlet mapping and one directory classes which contains HelloServlet.class
(2) I used following command for creating war file from myServletWAR director(i.e from my web application's directory).
jar -cvf TestServletWAR.war .
This creates the TestServletWAR.war file in myServletWAR dir.
Here is how my Servlet and web.xml looks like...
Servlet code
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class HelloServlet extends HttpServlet
public void doPost ( HttpServletRequest req, HttpServletResponse res )
throws IOException, ServletException
doGet( req, res );
public void doGet ( HttpServletRequest req, HttpServletResponse res )
throws IOException, ServletException
res.setContentType( "text/html" ); // Can also use "text/plain" or others.
PrintWriter out = res.getWriter();
// Get the requestor's IP address (See JavaDocs to see how to get other info):
String addr = req.getRemoteAddr();
// Create output (the response):
out.println( "<HTML><HEAD><TITLE>HelloServlet in myServletWAR</TITLE></HEAD>" );
out.println( "<BODY><H1 ALIGN=\"CENTER\">" );
out.println( "Hello " + addr + ", from HelloServlet in myServletWAR!" );
out.println( "</H1></BODY></HTML>" );
out.close();
************************Servlet Ends Here **************************
web.xml
---------------------------------------------------------- <!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<display-name>myServletWAR, a first Web Application</display-name>
<description>
This is a simple web application containing a single servlet
of the "Hello, World" variety.
</description>
<servlet>
<servlet-name>myHello</servlet-name>
<servlet-class>HelloServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>myHello</servlet-name>
<url-pattern>/myHello</url-pattern>
</servlet-mapping>
</web-app>
****************************web.xml file ends here********************
After deploying the TestServletWAR.war file on the weblogic 7.0, i tried to execute the servlet from the browser by the following URL
http://localhost:7001/myServletWAR/myHello
I am getting the HTTP 404 Error, which is an indication that weblogic was unable to find the resourse, which it was requested for. Can anybody plz tell me what i m doing worng?? do i need to use weblogic related xml file (i.e weblogic.xml) also along with web.xml. If yes, then what all i need to include that. I m not very sure. A sample weblogic.xml file for this HelloWorld example will help me a lot.
Looking forward for your help
Thanx in advance
Nisha

hi i have read ur answer regarding deploing a servlet in weblogic 7.0
i am facing another problem
when i try to access the servlet inside my classes directory it throwa an error stating this :
IT DOES NOT FOUND THE CLASSES ON WHICH MY SERVLET DEPENDS.WHAT DOEES ATHIS MEAN
KINDLY TELL ME
PUNEET JAIN
<May 28, 2003 1:46:25 PM IST> <Error> <HTTP> <101250> <[ServletContext(id=6057728,name=WebApp,context-path=/WebApp)]: Se
rvlet class myclasses.Wservlet for servlet welcome could not be loaded because a class on which it depends was not found
in the classpath D:\bea\user_projects\PuneetDomain\applications\WebApp;D:\bea\user_projects\PuneetDomain\applications\W
ebApp\WEB-INF\classes.
java.lang.NoClassDefFoundError: myclasses/Wservlet (wrong name: Wservlet)>
<May 28, 2003 1:46:26 PM IST> <Error> <HTTP> <101018> <[ServletContext(id=6057728,name=WebApp,context-path=/WebApp)] Ser
vlet failed with ServletException
javax.servlet.ServletException: [ServletContext(id=6057728,name=WebApp,context-path=/WebApp)]: Servlet class myclasses.W
servlet for servlet welcome could not be loaded because a class on which it depends was not found in the classpath D:\be
a\user_projects\PuneetDomain\applications\WebApp;D:\bea\user_projects\PuneetDomain\applications\WebApp\WEB-INF\classes.
java.lang.NoClassDefFoundError: myclasses/Wservlet (wrong name: Wservlet)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:791)
at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:517)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:351)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

How to deploy a WAR file in JRun server?

hi,
I created one war file, now i want to deploy that file in JRun server. can anyone give me an idea of how to deploy that war file in server...

By following the deployment documentation for your server. This isn't a general purpose "help me do everything" forum

Error while running a report JSP in a war file from 9iAS server

Hi,
I've a web application archive file (war) which i m deploying to the web using OEM. The war file consists of many JSPs. Among those JSPs i have one Report JSP, which i m calling from another JSP which is like a parameter form for the report JSP. When i call the report JSP, it gave me the following error,
javax.servlet.jsp.JspException: com.sun.corba.se.internal.iiop.ORB
javax.servlet.jsp.JspException: com.sun.corba.se.internal.iiop.ORB
at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:334)
at FMCardExp.jspService(_FMCardExp.java:58)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
The report tag in the report JSP is as follows,
<rw:report id="report" parameters="server=repsvr&userid=scott/tiger@db">
The report server is up and running and so is the database. This report JSP was generated from the reports builder and the opened in JDeveloper environment,in the war file project. It was then compiled and a war file was created. Surprisingly this report JSP works fine when i run my webapplication from the embedded OC4J instance for JDeveloper, but when i try to run it from the 9iAS server i get the above mentioned error. The deployment of the war file to the server is successful and the other JSPs work fine, only the reports JSP is not working. Do i need to have some settings for running the reports JSP, please advise.
Thanks in advance
Unmesh

Can you please help me in deploying jdeveloper (9.0.3.1)war file to 9iAS release 1, when I try to run, none of the jsp's execute, I get java OutOf Memory error, I also think that there may be some version compatibility between jdev jdk and 9iAS jdk.
Thanks,
Kavitha

Deploy .war file in Ebs 11i-11.5.10.2

Hi,
My boss is asking me to deploy the .war file in one of the EBS 11i - 11.5.10.2 instance. I am wondering to know how can we deploy .war in EBS 11i Instance?
If we can deploy the .war in EBS 11i Instance please post the high level steps and if not kinldy suggest the softwares how to deploy the .war?
As my understanding is We would required to install OC4J in new machine which will install the default DB and we can deploy the .war file in that OC4J server.
Thanks,
Syed

Hi,
I believe your understanding is correct. Please see (Note: 557221.1 - Oracle WebCenter 10g Application Creation and Deployment Guide for Oracle E-Business Suite Release 12) but it is for R12 for the steps of deploying war files.
Regards,
Hussein

Customizing AM Images & Facing Problem in Update & Deploy War files

Hey Guys!
This is Yash Bansal from Gurgaon, India. i am new to access manager. i am now customizing it and facing problem in customizing.
I have customized images which is present in directory path:
opt/SUNWam/web-src/services/images/
and updated services.war file which is present in directory path:
opt/SUNWam/war/
with command
jar -uvf services.war /opt/SUNWam/web-src/services/images/login-backimage.jpg
then deployed configuration from the web server 7.0 admin console.
after that when i open the url
http://<hostname>/amserver/console
then Page Not Found error comes in the browser.
Just wanted to ask you guys am i doing the steps right. please help if someone know how to update and deploy war file on Sun Web server 7.0.
Thanks & Regards,
Yash Bansal

Hi!
Deploying the configuration does not (re)deploy the application. Webserver stores a copy of the deployed application and all configurations in the admin instance. When you change anything in the webserver console it is first written there and only applied to the productive instance when you deploy configuration.
When you add images, jsps or something else to /opt/SUNWam/... and want it redeployed you have to use amconfig command. in /opt/SUNWam/bin there is a file called amsamplesilent. You have to fill the values in this file and then use
./amconfig -s amsamplesilent
I believe for a redeploy you have to set DEPLOY_LEVEL to 21, not sure here, check documentation.
I personally usually do not redeploy for images and such, I simply copy them directly the deployed location.
Why http://.../amserver/console does not work anymore, I have no idea. But at least after a redeploy it should be there again.
hth Chris

How to deploye .war files in SOA_Server1 ?

Hi,
I was created Auto Generated Task form for Human Task in 11G.After that how to deploye .WAR files manually in
"Infra -Soa(Soa_srerver1)" .Plz help me now

When you auto-generated the UI it would have defaulted to creating a web app project in your application. When you deploy the BPMN process, there are three steps in the wizard:
1. Deploy Configuration
2. Task flow deployment
3. Select Server
In step 2 you can select some of all of the UI projects in the app and deploy them as part of deploying the composite. The build/deploy process will automatically create the war(s) and ear file. Once they're deployed, you can leave them un-selected to avoid redeploying them each time you just change the process definition. If you make changes to the UI, you can just select them again during deployment and select the option to overrwrite the EAR.

Deploy war-files on application server 6.40?

Similar Messages

Maybe you are looking for