Deploy XI java Proxy inside JBoss application server

Hello,
Can I deploy XI java Proxy inside JBoss application server
Appreciate you response.
Thanks

Hi,
<b>Yes</b>
You can deploy your Java Proxy inside JBoss Server (in any Application server). But this will be possible only for Client Java Proxy and not for Server Java Proxy.
I have succesfully completed those scenarios.
After generating Client Java proxy, create EJB application with generated Java classes for proxies and deploy it in JBoss.
Then you can access that EJB to pass inputs either in standalone application or some JSP.
Regards,
Uma

Similar Messages

Deploying a web service on Oracle application server

Hi;
I was able to create the .wsdl file from Elipse using Java 1.3.
I was not able to connect to the oracle Application server from eclipse is there any other way to deploy the web server.
Can anyone advise with the steps to deploy a web service on Oracle Application server 10.1.3. differently
Regards,

using Ant.
check apache.org project there they have the ant section.
Regards

JBoss Application server setup with netbeans IDE.

Hi All,
I need to configure the JBoss Application server with netbeans IDE. I have tried this scenario,
1) Unzip the jboss-4.2.2.GA.zip into jboss dir.
2) Selected the JBoss Application server 4.
3) And i have set the Installation location like this j:/jboss/jboss-4.2.2.GA. In this i got some problem.
The problem is: Next button did not selected.
Error: provide valid installation dir path.
How to resolve this problem? Can anyone give suggestions for resolving this error?
Its very urgent!!

A couple of things:
1. if you are using SJSAS 9.0 it's Glassfish v1 (not v2 - that's probably for the 9.1 version? I don't know, I'm running 9.0 and installs fine with Gf v1 - thanks for the tip, btw!)
2. as for the domain, just pick the default offered (unless you have some specific requirement) - in any event, it's under the domains/domain1 folder
you can always create a new one and register (it will have its very own folder under /domains) but given that's probably a dev box, I can hardly see the point (and when I did it a long time ago, it was more pain that any human being should be subjected to :-)
Finally, one cannot but wonder why on earth someone (at Sun) developed NB and put Sun Java Application Server (developed at Sun) as one of the options that won't work with SJAS 9.0+ (developed at Sun) but one has to instead choose Glassfish (developed at Sun) and that won't work if one chooses v2 instead of v1 if it's SJAS 9.0 instead of 9.1 (or vice versa)...
Don't these guys test the thingy with THEIR own stuff?
Don't get me wrong, I totally love Sun, and all the good stuff they come up with (NB, SJAS, etc. etc.) but done it properly it would help them to gain market share, now, wouldn't it?

How to deploy a web service on Oracle Application Server 10.1.2.0.2?

Hi everyone,
I followed the instructions of the following link to create a web service using jDeveloper 10.1.3.1.0 on Oracle Application Server 10.1.2.0.2. [http://st-curriculum.oracle.com/obe/jdev/obe1013jdev/10131/devdepandmanagingws/devdepandmanagingws.htm#t1]
The web service created was deployed & used with no errors on the standalone OC4J instance.
But my goal is to deploy my web service on Oracle Application Server 10.1.2.0.2.
So after several attempts, I was able to deploy it on the Oracle Application Server 10.1.2.0.2 but unfortunately I didn't know the URL needed to use the web service.
I tried the following link (http://192.168.0.91:18100/JavaWebService-GetDates-context-root/GetDatesWSSoapHttpPort) but also didn't work :(
I also tried converting to J2EE 1.3 and still not knowing how to access the web service.
Please advice with a solution.
Thanks in advance.
Lana

Thanks everyone for your help :)
The problem turned out to be that Oracle application server 10.1.2 is unlike the others servers, it uses 2 ports:
- port (19100) is dedicated for the console.
- port (7779) is to view your applications.
So the URL needed turned out to be "http://acteos-109.beirut.acteos:7779/beanTest" instead of "http://acteos-109.beirut.acteos:18100/beanTest"
Hope this info is useful
Lana

Deploy forms and reports on Oracle Application Server 10gR3 10.1.3 .1.0 on

hello and hi alls,
I and two tire method , one for database and one for application server. i connect to databse ,but am i does not unserstand how deploy forms and reports on Oracle Application Server 10gR3 10.1.3 .1.0 ,pls
help me
Reagrd
Mahr Haider Iqbal
Functional & Technical Consultant

Hi,
Well you just need to create a directory in paste your forms there, and then make an entry in the formsweb.cfg file and forms.conf files. Likewise there are entries for the images and report.
http://download.oracle.com/docs/cd/B28638_01//doc/frs/forms/B14032_03/basics002.htm
regards

Adding JBoss Application Server for Monitoring

How do you add a JBoss Application Server for monitoring? Is there a way to add it silently like silent install of the host target?

It is a manual process, you need to launch Jboss discover UI using Targets > Middlware page.
Also, please use JVMD for more detailed analysis.
You need to specify JARs based on the version of the JBoss -
Note - Please check the support site for exact certified versions of JBoss.
JBoss 4:
dom4j.jar jboss-management.jar jnp-client.jar
jbossall-client.jar jboss-client.jar
JBoss 5:
concurrent.jar jboss-javaee.jar jboss-serialization.jar
dom4j.jar jboss-jsr77-client.jar jbosssx-as-client.jar
jbossall-client.jar jboss-logging-spi.jar jbosssx-client.jar
jboss-client.jar jboss-management.jar jnp-client.jar
jboss-common-core.jar jboss-remoting.jar jboss-integration.jar jboss-security-spi.jar
JBoss 6:
concurrent.jar jboss-management.jar
dom4j.jar jboss-remoting.jar
jbossall-client.jar jboss-security-spi.jar
jboss-client.jar jboss-serialization.jar
jboss-common-core.jar jbosssx-as-client.jar
jboss-ejb-api_3.1_spec.jar jbosssx-client.jar
jboss-integration.jar jboss-transaction-api_1.1_spec.jar
jboss-jsr77-client.jar jnp-client.jar
jboss-logging.jar
If you plan to use JVMD then you should select Remote Agent for discovery/monitoring.
JNDI service should be configured and Naming Service port should be open.
Agent should be able to communicate with the host and JNDI port.
Above list of JARs to be copied on the agent machine (location provided as library path during discovery)
Could you please share customer details and usecases.

Install both Sun Application server and Jboss application server- Can I?

Dear all,
I am programmer and want to test for something.
Is it possible to install sun application server and jboss application server in the same computer (Windows XP Professional)?
Is there any special attention I need to take?

I am programmer and want to test for something.Allowed.
Is it possible to install sun application server and jboss application server in the same computer (Windows XP Professional)?Why do you think it may not be possible ?
Is there any special attention I need to take?just the way the URL is populated.

Jboss application server upgrade

Hi All,
As per our requirement we are planning to migrate web application from jboss application server 4.0.1.GA to Jboss 7.0.1 GA.
I am new to the Jboss application server . Can you please tell me the advantages of using jboss AS.
and what is the difference between 4 and 7.
If we are going to upgrade the server, what are things we need concentrate it ? ( like logging ,jndi etc).
Please share your valuable points .

Hi All,
As per our requirement we are planning to migrate web application from jboss application server 4.0.1.GA to Jboss 7.0.1 GA.
I am new to the Jboss application server . Can you please tell me the advantages of using jboss AS.
and what is the difference between 4 and 7.
If we are going to upgrade the server, what are things we need concentrate it ? ( like logging ,jndi etc).
Please share your valuable points .

Example for Tagging API using EJB3.0 on Jboss Application Server

Hello Friends
In EJB 3.0 development I am searching for Taging API implementation using JBOSS application server and Netbeans 5.
If anyone has tutorial to do so please post the link.
Thanks in advance.
Ravi Phulari

Hello Friends
In EJB 3.0 development I am searching for Taging API implementation using JBOSS application server and Netbeans 5.
If anyone has tutorial to do so please post the link.
Thanks in advance.
Ravi Phulari

How to deploy the project into my weblogic Application Server?

How do I deploy the project into my weblogic Application Server? Should it be fine if I copy the project folder to the AS root?
Also, How should i invoke the Context sensitive help from Javascript assuming project deployed to Weblogic AS.
I am using Robohelp 10.
Thanks in advance.

Hi,
You generate the help and then you copy the generated output to the server.
For context sensitivity, which output are you using? Try the following
pages for more info:
http://www.grainge.org/pages/authoring/calling_webhelp/calling_webhelp.htm
http://www.wvanweelden.eu/article-category/context-sensitivity
Greet,
Willam

Deploying Jave portlet on Oracle Application Server 10g

I have installed Oracle 10g Application server, donwloaded and installed JDevleoper 9.0.5.1 and the latest Java Portal Development and as well as the JDeveloper portlet-addin. Now, I followed the instructions from the http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/BUILD.JSR168.PORTLETS.USING.JAVA.PORTLET.WIZARD.9IJDEVELOPER.HTML
On using JDeveloper addin wizrd to create a java portlet and so far so good. However, I am stuff on the last bit on deployment. It document says "# Now use the URL provided in the log page at the bottom of JDeveloper to get part of your URL (e.g. http://myserver.uk.oracle.com:8888/my-portlet) and complete the URL.
http://myserver.uk.oracle.com:8888/my-portlet/portlets?WSDL
Now use this URL to register your portlet with OracleAS Portal.
But when i deploy my application (just a test thing), from the deployment tab I get:
---- Deployment started. ---- 22-Mar-2005 14:11:27
Target platform is Oracle Application Server 10g (hotseatConnection).
Wrote WAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.war
Wrote EAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear
Invoking DCM servlet client...
C:\Java\j2sdk1.4.2_03\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Java\JDeveloper9.0.5.1\jdev\lib\oc4j_remote_deploy.jar http://194.83.41.114:1811/Oc4jDcmServletAPI/ ias_admin **** redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat UNDEFINED
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = c253297271317c3f930003c405ea91ff598582f0be0
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
DCM command completed successfully.
Output:
Exit status of DCM servlet client: 0
Elapsed time for deployment: 1 minute, 45 seconds
---- Deployment finished. ---- 22-Mar-2005 14:13:12
My question is, HOW DO I ACCESS the deployed application, since it didn't specify the URL where it's deployed????
Many thanks
P/S
I have tried:
http://{myserver}:8888/{my-portlet}/portlets?WSDL but that doesn't work

Hi FormsEleven,
When you say you can do this or you have done for demo then considering following directory structure if I have two forms having common form names how it will be resolved?
Or how the url to access these forms will be?
As shown in the following structure consider we have Form1 in sub directory1 as well as in sub-directory2 then how the link to access these forms will be?
- Hosting Directory (formsweb.cfg entry)
- Sub Directory1
      - Form1
      - Form2
- Sub Directory2
      - Form1
      - Form4
- Sub Directory3
      - Form5
      - Form6

Without reload the JBoss application server after compile the java

in Jboss app server.
duing the developmenet i modify the .java files and compile it. when ever i compiled the .java file i have to restart the jboss service. then only the modification is done.
so i would like to know where i have to set the configuration for without restart the jboss server

Dear Vincent
Its already set the Parameter rdisp/j2ee_start = 0. last week we are upgrade the kernel from 173 to 221. after that this problem was started.
Regards
Sriram

Problem Deploying Oracle PDK Portlet to Oracle Application Server 9.0.4.0

I have a big issue trying to deploy a pdk portlet I have created in JDeveloper (10.1.2). The application is very simple, it consists of 2 JSP's (call them Select.jsp and Display.jsp) and 1 Java Class (Call it DoEverything.java).
The architecture of the system is VERY simple. The Select.jsp is a simple drop down list that is embedded in an html form, with the options in the drop down populated by a method call from DoEverything.java. Once the user selects an option and hits submit, he is sent to the Display.jsp, which is a simple html table that is populated by another method call from DoEverything.java. (Basically the whole system is a simple "view" of a given table in a DB based on the option selected in Select.jsp).
The system works perfect in JDeveloper, where I created it using the Oracle PDK Java Portlet wizard. However I'm running into a problem when I try and take it over to the Application Server. The main documentation I have been following is the: Oracle® Application Server Portal Developer's Guide and in particular the section 6.6.2.4.1 Creating a Connection to Oracle Application Server Containers for J2EE where it explains how to connect to the App. Server. The line "The steps that follow describe the procedure for deploying to a standalone instance of Oracle Application Server Containers for J2EE. For information about deploying to a full Oracle Application Server instance, please refer to the Oracle JDeveloper online Help system." is the one that is bothering me the most as I am trying to deploy to a full instance of the Oracle Application Server, but I cannot find anywhere that walks me through this in the online JDeveloper help.
Anyway, currently we ftp the appropriate JSP's, Java Class, provider.xml and provider properties files to their respective directories on the Application Server, register the provider and reboot the Http Server. (This has worked before except for the fact that when the user selected an option from the Select.jsp and the request was then sent over to the Display.jsp based on the form action the Display.jsp wasn't recognized. We figured the provider.xml file needed to be edited in this case in order to know where Display.jsp was being kept). In any event nothing seems to be working at the moment and my main concern is that it maybe we should be deploying as EAR/WAR (both of which I'm not super familiar and my second main concern is that it seems most people use JavaBeans and Struts and all sorts of different API's whereas here I just have a fairly simple Java Class back end that connects to the database and creates an object based on the attributes contained in the database (1 object for 1 unique row in the DB) and I want to be sure that the way I have developed this should still work with the Oracle AS. I'm hoping its just a matter of getting the directory structure straightened out and editing the provider.xml file to include all the JSP's.
Sorry for the long post, but if you could address my two main concerns and possible give me or point me towards a good thorough walk through of deploying a simple system (oracle pdk java portlet) like I have developed to the App. Server it would be greatly appreciated !
Thanks a lot.

Basically I started to develop this system inside Oracle AS and then when it came time to passing a request to a new page, it crapped out on me on the App. Server. So instead of trying to fix the problem there and then I continued to develop outside Portal and inside Jdeveloper. After a week or two once all my stuff worked perfectly I try and take it back into Portal but only the first JSP of all my Portlets would show up, because as soon as I would submit a form and the action directed me to a new page and Portal would be lost/confused. Obviously I shouldn't have done it that way but none the less...
So now I'm reading through the documentation you pointed me towards and it seems I have to qualify my parameters and then "attach" them to the url which the form will pass to the actioned page. I'm importing numerous classes (...urlUtils, etc) in order to qualify the parameters and then build this url without affecting any parameters currently present that my portlet does not own.
What I'm rambling towards here is all this separation of logic and presentation and the whole nine, implies different people can develop different parts of a 'system' mostly independant of one another...so in my situation I shouldn't in huge trouble yet, since underlying everything is a working system. My issue is with oracle and the App Server. If I take my code which works great outside of the App. Server and I fully qualify parameters and make sure my form actions are constructed using the UrlUtils in order to fully qualify them as well, and then I make sure page parameters are mapped to the proper portlet parameter values....should my system work on the App Server (assuming everything is done properly)....or am I still missing something.

From PL/SQL call java class present in Application server

Hi,
I need to call a java class file which is present on the application server. the call has to be made from pl/sql.
I do not want to make use of the java stored procedures for this.
Is there a way to call a class file residing on the application server from a pl/sql.
Please help me out.
Thanks & Regards
Kamlesh

New idea. DDL isn`t working but if i would make some DQL ? Like select??
I`m trying to deploy java class like this:
public class test {
     public static String say()
          throws SQLException{
               Connection conn = new OracleDriver().defaultConnection();
               String sql = "Select names from pdb_proteins where numbers=61";
               try {
                    // Load the Oracle JDBC driver
                    Class.forName("oracle.jdbc.OracleDriver") ;
                    System.out.println("Oracle JDBC driver loaded ok.");
                    } catch (Exception e) {
                    System.err.println("Exception: "+e.getMessage());
               try {
                    ResultSet rset = null;
                    PreparedStatement pstmt = conn.prepareStatement(sql);
                    rset=pstmt.executeQuery(sql);
                    String wynik = null;
                    wynik = rset.getString(1);
                    return wynik;
          } catch (SQLException e) {
               System.out.println("Connection Failed! Check output console");
               e.printStackTrace();
               return "nope";
Then invoke with PL/SQL function
and i`m getting error ORA-29534: object SYSTEM.oracle/jdbc/OracleDriver
Could someone help me with this? How i could register jdbc driver inside Oracle db??
Edited by: Rado_mir on 2013-06-03 02:42

Cannot deploy from netweaver developer studio to application server

Hi
I am trying to deploy a simple EAR (ConverterEAR) to my application server.
From NW developer studio, right clicked on the SAP server that I have configured and try to a publish. It gives me the below exception. For some reason its trying to contact my old IP address. Is there a file where I can change this setting. My Laptop is set to use DHCP so my IP changes when I reboot my laptop. I also have configured a Microsoft loop back adapter.
ct 16, 2007 2:58:42 PM /userOut/daView_category (eclipse.UserOutLocation) [Thread[Thread-17,5,main]] ERROR: com.sap.ide.eclipse.deployer.api.APIException: ConnectionException,cause=NamingException.Cannot get initial context.
Reason: Exception while trying to get InitialContext.
     at com.sap.ide.eclipse.deployer.dc.DCClientImpl.<init>(DCClientImpl.java:45)
     at com.sap.ide.eclipse.deployer.dc.DCClientFactoryImpl.createClient(DCClientFactoryImpl.java:80)
     at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:181)
     at com.sap.ide.eclipse.sdm.threading.DeployThreadManager.deploy(DeployThreadManager.java:358)
     at com.sap.ide.eclipse.sdm.SDMManager.deployArchives(SDMManager.java:148)
     at com.sap.ide.j2ee.wtpserver.SAPPublisher$DeployRunnable.run(SAPPublisher.java:380)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.sap.engine.services.dc.api.ConnectionException: NamingException.Cannot get initial context.
Reason: Exception while trying to get InitialContext.
     at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:189)
     at com.sap.engine.services.dc.api.session.impl.SessionImpl.<init>(SessionImpl.java:115)
     at com.sap.engine.services.dc.api.session.impl.SessionFactoryImpl.newSession(SessionFactoryImpl.java:24)
     at com.sap.engine.services.dc.api.impl.ClientFactoryImpl.createClient(ClientFactoryImpl.java:66)
     at com.sap.ide.eclipse.deployer.dc.DCClientImpl.<init>(DCClientImpl.java:42)
     ... 6 more
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
shadow:50104 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: XX.XX.139.134 and port: 50104]
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(Initia:lContextFactoryImpl.java:488)
     at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
     at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
     at javax.naming.InitialContext.init(Unknown Source)
     at javax.naming.InitialContext.<init>(Unknown Source)
     at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:166)
     ... 10 more
Caused by: com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
shadow:50104 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: XX.XX.139.134 and port: 50104
     at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:53)
     at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:33)
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:352)
     ... 15 more
Environment
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP01
Build id: 200710090648
SAP_J2EE_Engine_Version -- 7.1.3301.150742.20070516182900
Thanks
Madhu

Hi,
you could change the connection settings to the server in the preference page in the Developer Studio. Check <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/45/0cf28fb4d01f23e10000000a1553f7/frameset.htm">this</a> page in the documentation for details.
In your case, you can also use the host name of your laptop, or even just localhost, in the Message Server Host field in the preferences page. This should overcome the problem with dynamic IPs.
Hope that helps!

Deploy XI java Proxy inside JBoss application server

Similar Messages

Maybe you are looking for