Deploying AAMEE 3.1 created MSI by double clicking it in UI mode

With the release of AAMEE 3.1, AAMEE created MSI supports both silent and UI based installation.
For UI based install of AAMEE 3.1 created packages, run the MSI as an administrator. If you are logged in as Admin user, you can double click it, otherwise right click the MSI and run as administrator. A minimalistic UI will be shown with just a progress bar. Any error during MSI install will cause a roll back and the user should check the logs to see what went wrong. You can also run the MSI in UI mode through this command line –
msiexec.exe /i <path of msi>
AAMEE still supports silent installation as the standard way of deploying the packages. Silent installation can be done only through the command line option –
msiexec.exe /i  <path of msi> /qn.
Make sure that the command line is invoked with admin privileges. For users using SCCM 2007 for deploying AAMEE created packages, make sure to check “Allow users to interact with this program” checkbox in Environment tab of the SCCM Program for UI based installation. The corresponding checkbox for SCCM 2012 is “Allow users to view and interact with the program installation”.
For uninstallation of MSI in UI mode, there is only a command line option –
msiexec.exe /x <path of msi>
For silent uninstallation, add the /qn switch with the above command line –
msiexec.exe /x <path of msi> /qn
This UI based installation is only supported by the packages created using AAMEE 3.1. If you are using AAMEE 3.1 beta or AAMEE 3.0 for CS6 packaging, please download AAMEE 3.1 from http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html.
Feel free to mail me at [email protected] in case you see any issues.
Thanks,
Saransh Katariya | Member of technical staff | Adobe Systems | [email protected]

I want to revisit this. You can also see my related posts here:
http://forums.adobe.com/message/5073735
I had contented myself that I would use a batch file and require users to right-click and run as admin on the batch file. This was so that I could get Acrobat 10 installed at the same time. However, now that I have Acrobat 11, and I can separate out the installers, I would like to get back to this "double-click" method. I've verified that my new package (without Acrobat) works using the msiexec command. However, it still doesn't work as a double-click.
Here are the key lines from PDApp.log:
3/8/2013 07:54:21 [ERROR] Setup - Error parsing command line arguments at - "DISABLE_CCM_DESKTOPSHORTCUT".
Expected arguments are -
          --mode=silent
          --overrideFile="<FilePath>"
3/8/2013 07:54:21 [FATAL] Setup - Administrative Privileges required to continue
3/8/2013 07:54:21 [FATAL] Setup - End Adobe Setup. Exit code: -10
However, I am an admin on the machine, just as I am on all the machines that I've tested this on. And when I use a batch file with the msiexec and right-click and run as admin, I don't have to put other credentials in, verifying that I am, in fact, an admin on the machine.
Thanks for your assistance.
Mark

Similar Messages

  • BDC Ok-Code for Double Click

    Hi ,
    Could anyone let me know the BDC OK Code for Double click.
    I need to select a row by double clicking it in my recording but not able to capture the code for it.
    Please do the needful.
    Thanks in Advance,
    Sowmmya B

    Hi sowmmya,
    1. If the row you are talking about is
       ALV Grid OO concepts,
       then i think there is a problem.
       It won't work with BDC as u are trying.
    2. Well, for getting the code,
       before double clicking go in debug mode /H
       and then double click.
    3. Now in deubbing mode,
      see the value of sy-ucomm.
    regards,
    amit m.

  • JTable's cell double click question...

    Hello everyone,
    My JTable has some cells with icons and text, and some contains only text.
    All cells are editable, so double clicking on it goes to "edit mode" where user enters new value for the cell.
    Here is my question: Can I somehow determine if user has clicked on an icon?
    What I'm trying to do is to put additional information for cell (some comment), and if comment exists, icon will appear.
    Double clicking on that icon, dialog will show that comment.
    Thanks in advance!

    You did not mention that before. ...You are absolutely right, I didn't.
    Let me emphasize importance of this:
    Can I somehow determine if user has clicked on an icon?
    And when I said "clicked" I mean double click when entering edit mode
    of a cell.
    If I could somehow determine that, I could than
    perform desired action (open a dialog, or something else).
    Thank you for your help so far.

  • AAMEE Created MSIs

    right I have used AAMEE 3.0  to create MSis for CS6 Web Premium - all components, these have been deployed via sccm to about 30 users in the last 3 months.Will they be affected ? - can going into photoshop and help\update fix the problems ?
    Thanks
    Editor's note:  AAMEE is Adobe Application Manager Enterprise Edition 

    Hi Mancity1966,
    You will want to download the latest version of AAMEE, 3.1 as referenced in this doc
    http://helpx.adobe.com/x-productkb/global/guidance-administrators-certificate-revocation.h tml
    We recommend that you recreate the CS6 Web Premium MSI's for future deployments if products in your current MSI's are affected.
    Here is a list of impacted products and links to updates for them:
    http://helpx.adobe.com/x-productkb/global/certificate-updates.html#main-pars_header_5
    I recommend downloading any updates directly from that page versus using Help>Updates
    -Dave

  • Can AAMEE 3.1 create pkg for CS6 Design Standard?  or just CS6 Mast Collection?

    can AAMEE 3.1 create pkg for CS6 Design Standard?  or just CS6 Mast Collection?

    ok, thanks,  just wanted to make sure. I have a volume serial no.   for CS6 Dest Stan.
    AAMEE 3.1 is for CS6 Suite,  so should be good for all CS6
    I created a pkg for CS6 Mast Coll using AAMEE 3.1 a few months ago and works fine  (.msi)

  • When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

    When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

    Anyone can help to advice how to solve this issue ?

  • I can no longer create an event on iCal by double clicking on a time or date, nor can I double click on an existing event! HELP!

    I can no longer create an event on iCal by double clicking on a time or date, nor can I double click on an existing event! HELP!
    The only way I have to create an event is by using the "+" button, which is very limiting!
    I am running the latest version of Mac OS X and all the updates.
    Anyone know how I could get a proper use of my iCal ?
    Thanks

    Hi,
    If you list the steps you have taken to fix this it will help.
    Have you tried using the File > New Event menu item?
    Have you logged the user account out/ restarted the computer?
    Have you tried un-syncing any accounts synced to Calendar?
    Is there some change made to the computer that may have triggered this?
    Best wishes
    John M

  • ICal 5.0 double click in date box (month view) doesn't create 1 hour long event anymore

    Double-clicking in a date box in the "month" view used to create a new one hour long event.
    Now, in 5.0 it creates an all-day event by default, and removing "all-day" results in a 6 hour long event. Anyone know how to get it back to the "old" way? really annoying to have to change it each and every time! Thanks.

    Lisa,
    Here are some of the iCal event creation rules which may help you:
    Enter a name, date, and time duration for the event, and then press Return.
    For example, you can enter “Super Bowl Party Feb 6,” “Movie with Rebecca on Friday at 7pm,” “Soccer Game on Saturday from 11am-1pm,” or “Breakfast with Jon,” and then press Return.
    If you don’t enter a time duration for the event, iCal sets the event’s duration to 1 hour.
    If you don’t enter any time information for the event, iCal makes the event an all-day event.
    If you enter “breakfast” or “morning,” iCal sets the event to start at 9 a.m.
    If you enter “lunch “ or “noon,” iCal sets the event to start at 12 p.m.
    If you enter “dinner” or “night,” iCal sets the event to start at 8 p.m.

  • When browsing a new library that I created, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle the image appears. How do I get images to appear in the browser rectangles?

    When browsing a new library that I created and exported onto an external hard drive, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle, the image appears, but all the other rectangles remain empty - no image. How do I get images to appear in the browser rectangles? I am viewing this on a second computer (an older intel duo iMac), not the one I created the library on (a MacBook Pro). Both computers have Aperture 3.2.4 installed. When I return the external to the MacBook, all images appear in browser rectangles. What's happening on the iMac?

    You may have a problem with the permissions on your external volume. Probably you are not the owner of your library on the second mac.
    If you have not already done so, set the "Ignore Ownership on this Volume" flag on your external volume. To do this, select the volume in the Finder and use the Finder command "File > Get Info" (or ⌘I).
    In the "Get Info" panel disclose the "Sharing & Permissions" brick, open the padlock, and enable the "Ignore Ownership on this Volume" flag. You will have to authentificate as administrator to do this.
    Then run the "Aperture Library First Aid Tools" on this library and repair the permissions. To launch the "First Aid Tools" hold down the ⌥⌘-key combination while you double click your Aperture Library. Select "Repair Permissions" and run the repair; then repeat with "Repair Database". Do this on the omputer where you created the library and where you can see the thumbnails.
    Then check, if you now are able to read the library properly on your iMac.
    Regards
    Léonie

  • Double-click to create method/attribute in EHP2 Netweaver 7.0 does not work

    Hi,
    this makes me wonder:
    I'm used to create new attributes or methods by simply double-clicking the new name and the system will ask me to create. Now I am new in EHP2 and for methods it just says 'wrong cursor position or object not in navigation', for attributes system just does not show any reaction.
    Please help me as it is really annoying always to create things from object tree or class header.
    What is it I do not see?
    Thanks so much.
    Clemens

    Hi,
    sorry I thought it was clear: I try in the new ABAP front end editor - accessed through SE80, SE24, SE38 and anay transaction that allows you to edit code (except  lousy things like the enhancement spot implementation code window).
    An it is still the same: In a report, I can write perform xyz and double-click will asjk me to create a form. Just in oo context, attributes and methods should be the same - as it was since ECC600 or even before on 46C. Except our current system I don't know anyone working on EHP2 for Netweaver 7.
    EHP2 just another undeclared untested Beta-Version?
    I can't believe.
    Regards,
    Clemens

  • Dump error while creating or double click the info package

    Hello experts,
    I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I  created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request  REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
    Then I have search cause in SDN,  and I have reference OSS Note 852443 to do .
    Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
    I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
    in my BI 7.0 system,   ROOSPRMSC、ROOSPRMSF is no any data.
    I was no found delta queue in RSA7.
    Now . Dump error while creating or double click the info package,  how can I change this?
    Please let me know the solution.
    Thanks for your help.
    Best Regards
    Steve

    Here are some links  which deals with same issue.
    Re: Dump In Infopackage
    Re: Getting into Short dump at the time of selecting InfoPackage to execute for
    Short dump while performing init in infopackage
    Re: Infopackage going into short dump
    Thanks.

  • How can i setup pages to automatically open when double clicked.  Currently when I double click it creates cpgz file and does not open.  The only way to open pages doc is to manually ask to open with pages.

    Currently when I double click it creates cpgz file and does not open.  The only way to open pages doc is to manually ask to open with pages.

    Hi Karen,
    Sounds like OS X has lost the association between Pages and its files.
    Start by quitting Pages, then going to Finder.
    In Finder, locate a .pages file. Click on it (once), then press command-I (eye, not one) to Get Info.
    In the Info window that opens, expand the Open With section.
    In this section, click on the pop-up menu and choose Pages (even if Pages is already shown).
    Click the Change All button to associate all files with the .pages extension with Pages.
    Close the info window.
    Double click any .pages file to check that Pages will now launch and open the file.
    Regards,
    Barry

  • When double click itunes icon it shows " The file itunes library.itl can not be read because it was created by a newer version of itunes" so what can i do?

    when double click itunes icon it shows " The file itunes library.itl can not be read because it was created by a newer version of itunes" so what can i do?

    Unless you have attempted to downgrade to an older version of iTunes this is likely to be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
    tt2

  • How can I create a jar file that will run automatically on double click

    all the jars I created run only from the command-line.
    how can I make it run by double-click on it?

    First you will need to associate .jar files with the javaw.exe program in order to just be able to double click on the jar and run it from within a windows explorer application. Next you will need to set the main class attribute of the manifest file. My understanding is that the value of this attribute is used by the launcher to know which class to load. In other words, which is your main application class. To specify this attribute open your manifest file in a text editor. You will find this file located within the jar at META-INF/MANIFEST.MF. Then, add the line,
    "Main-Class:<relative path to the main class>" However, remember not to add the .class extension to the end of the class name.
    In Windows 2000 you can associate jar files with javaw by finding a jar file in Windows Explorer and right clicking it. This will give you a context menu which should have an Open With... option (if you are not using Windows 2000 and don't see the 'open with' menu item, try holding down the shift button while right click on the file). Select the Open With... option, then, when the dialog appears highlight javaw and select the "Always use this program to open these files" checkbox. When you hit the OK button you should have all your jar files associated with the javaw process.
    Once you've done this, you should be able to double click on your jar file and run your application.
    Regards,
    Daniel Walsh

  • How can I double-click a file to open it in default app in my Visual Studio project without creating an installer?

    I have an app with code to open a file by double-clicking on it. The app in my Visual Studio project file should start automatically and then open the file automatically. I double-click on the file, then look for the app in my solution folder (I choose the
    .exe in the Debug folder). Am I choosing the correct .exe file?
    What I'm trying to do is test some code I wrote that will open the associated file type when I double click on it, as opposed to creating an installer, installing the app and then double-clicking on the file to see if it will open in the associated app automatically.

    Hi dudefromthebronx,
    Yes, I think you could doubt click the .exe file in your local machine.
    Of course, maybe you could get it in Bin\Debug or Bin\Release folder, it is related to the current project settings.
    But we would know some differences between them:
    http://stackoverflow.com/questions/11600162/difference-between-bin-debug-and-bin-release
    https://social.msdn.microsoft.com/Forums/en-US/0cde96e6-8dd8-4aa9-adcf-d7f45da13b66/debug-bin-release-folders?forum=vbide
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for