Deploying IPCCx 8.x on HP DL380 G4 server

Hello,
We are in process of installing IPCCx 8.x on HP DL380 G4 server by upgrading HDD to required 146GB. Can some one advice with the compatibility of this as we need to run IVR on the same server.
Thanks
Nisar

Hi Nisar,
Please refer the section "Native Servers - Equivalent servers from HP" in the below UCCX 8.x series comp matrix.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
You can also get the excat MCS 78.. series quiivalent for your hardware maodel(from the below link) and check it in the above matrix.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_solution_overview09186a0080107d79.html
Hope it helps.
Anand
Please rate the helpful posts by clicking on the stars below the right answers !!

Similar Messages

Cannot deploy soa app from jdev, cannot find soa server

I installed/configured weblogic server, SOA, OSB, BAM. I started admin server, I created a managed server for soa: soa_server1, and started the managed server successfully. I opened weblogic console and see soa_server1 is running. I started EM, and see soa_server1 is running, and see the following 4 nodes listed in the left pane of EM:
weblogic domain, Application deployments, metadata repositories, user messaging services, but not SOA node.
When I created a simple soa application, and tried to deploy it to the server, JDev couldn't find the SOA server; when I tried to force deploy it by click the finish button, I got the error:
No SOA configured servers found for deploying the archive file:/C:/zzzz/YY/development/JDev/mySOA/CreditCardValidation/validationForCC/deploy/sca_validationForCC_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
I followed each step of the Oracle SOA tutorial. Where should I configure SOA server? How could I fix the problem?

you should create an application server connection in your JDeveloper to deploy your composites...
you can create a new connection by going to File/New/Connections/Application Server Connection...
while deploying the composite through jdeveloper, select the application server which you have created...
If possible , bounce the servers again...It should show up...
Thanks,
N

Cannot deploy BPM process from JDev into remote weblogic server

Hi all,
I have in a trouble!
I've built a simple BPM process but when i deploy it from JDeveloper to a remote weblogic server it have following error, pls give me solution
[02:16:27 PM] ---- Deployment started. ----
[02:16:27 PM] Target platform is (Weblogic 10.3).
[02:16:27 PM] Running dependency analysis...
[02:16:27 PM] Building...
[02:16:31 PM] Deploying profile...
[02:16:31 PM] Updating revision id for the SOA Project 'Project1.jpr' to '1.0'..
[02:16:31 PM] Wrote Archive Module to C:\JDeveloper\mywork\TestDeploy\Project1\deploy\sca_Project1_rev1.0.jar
[02:16:31 PM] Running dependency analysis...
[02:16:31 PM] Building...
[02:16:33 PM] Deploying 2 profiles...
[02:16:33 PM] Wrote Web Application Module to C:\JDeveloper\mywork\TestDeploy\Project2_UI\deploy\Project2_UI.war
[02:16:33 PM] Wrote Enterprise Application Module to C:\JDeveloper\mywork\TestDeploy\deploy\TestDeploy.ear
[02:16:33 PM] Deploying sca_Project1_rev1.0.jar to partition "default" on server AdminServer [http://HP:7001]
[02:16:33 PM] Processing sar=/C:/JDeveloper/mywork/TestDeploy/Project1/deploy/sca_Project1_rev1.0.jar
[02:16:33 PM] Adding sar file - C:\JDeveloper\mywork\TestDeploy\Project1\deploy\sca_Project1_rev1.0.jar
[02:16:33 PM] Preparing to send HTTP request for deployment
[02:16:33 PM] Creating HTTP connection to host:HP, port:7001
[02:16:33 PM] Sending internal deployment descriptor
[02:16:33 PM] Sending archive - sca_Project1_rev1.0.jar
[02:16:33 PM] Received HTTP response from the server, response code=503
[02:16:33 PM] Invalid logging line: <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
[02:16:33 PM] Invalid logging line: <html><head>
[02:16:33 PM] Invalid logging level on line: <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
[02:16:33 PM] Invalid logging line: <title>ERROR: The requested URL could not be retrieved</title>
[02:16:33 PM] Invalid logging line: <style type="text/css"></style>
[02:16:33 PM] Invalid logging line: </head><body>
[02:16:33 PM] Invalid logging line: <div id="titles">
[02:16:33 PM] Invalid logging line: <h1>ERROR</h1>
[02:16:33 PM] Invalid logging line: <h2>The requested URL could not be retrieved</h2>
[02:16:33 PM] Invalid logging line: </div>
[02:16:33 PM] Invalid logging line: <hr>
[02:16:33 PM] Invalid logging line: <div id="content">
[02:16:33 PM] Invalid logging line: <p>The following error was encountered while trying to retrieve the URL: http://hp:7001/soa-infra/deployer</p>
[02:16:33 PM] Invalid logging line: <blockquote id="error">
[02:16:33 PM] Invalid logging line: <p><b>Unable to determine IP address from host name <q>hp</q></b></p>
[02:16:33 PM] Invalid logging line: </blockquote>
[02:16:33 PM] Invalid logging line: <p>The DNS server returned:</p>
[02:16:33 PM] Invalid logging line: <blockquote id="data">
[02:16:33 PM] Invalid logging line: <pre>Name Error: The domain name does not exist.</pre>
[02:16:33 PM] Invalid logging line: </blockquote>
[02:16:33 PM] Invalid logging line: <p>This means that the cache was not able to resolve the hostname presented in the URL. Check if the address is correct.</p>
[02:16:33 PM] Invalid logging level on line: <p>Your cache administrator is [email protected].</p>
[02:16:33 PM] Invalid logging line: <br>
[02:16:33 PM] Invalid logging line: </div>
[02:16:33 PM] Invalid logging line: <hr>
[02:16:33 PM] Invalid logging line: <div id="footer">
[02:16:33 PM] Invalid logging line: <p>Generated Tue, 20 Dec 2011 07:18:27 GMT by proxy.hipt.com.vn (squid/3.1.4)</p>
[02:16:33 PM] Invalid logging line: 
[02:16:33 PM] Invalid logging line: </div>
[02:16:33 PM] Invalid logging line: </body></html>
[02:16:33 PM] Error deploying archive sca_Project1_rev1.0.jar to partition "default" on server AdminServer [http://HP:7001]
[02:16:33 PM] HTTP error code returned [503]
[02:16:33 PM] No error message is returned from the server.
[02:16:33 PM] Error deploying archive sca_Project1_rev1.0.jar to partition "default" on server AdminServer [http://HP:7001]
[02:16:33 PM] #### Deployment incomplete. ####
[02:16:33 PM] Error deploying archive file:/C:/JDeveloper/mywork/TestDeploy/Project1/deploy/sca_Project1_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Thanks a lot!

Hi, thanks for your reply,
I just check but soa-infra is up
Result:
Welcome to the Oracle SOA Platform on WebLogic
SOA Version: v11.1.1.5.0 - 11.1.1.5.0_110418.1550.0174 built on Mon Apr 18 18:05:14 PDT 2011
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 (10.3.5.0)
I've deployed my process in local computer that good! but from remote JDev i've wrong
Help me pls!

Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.

Installed SP 2013 Foundation in my Hyper-V machine
Created and done all the steps mentioned here http://blogs.msdn.com/b/shariq/archive/2013/05/07/how-to-set-up-high-trust-apps-for-sharepoint-2013-amp-troubleshooting-tips.aspx && http://msdn.microsoft.com/en-us/library/office/fp179901%28v=office.15%29.aspx
for self signed certificate
copied those two certificates in my local machine(base machine) D drive
(D:\Cert)
Both VM and base machine are in same domain
Installed VS 2013 in my base machine and create a Provided hosted app with the copied certificates, (For creation i followed the above mentioned URL)
Just created and hit F5 to run in my base machine, but getting this error
Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.
Please help me to resolve this issue, trying to figure out from last 2 days
Thanks in Advance
Arun

Hi Harminder,
This happens because an app has already been deployed and you are deploying it again using the same version.
Resolution:
Open the AppManifest.xml file and change the version.
Vivek Jagga - MCTS SharePoint
SharePointExcellence

Error While Deploying ADF BC JSF Application on Oracle WebLogic Server 10.3

Hi All,
I am Deploying ADF BC JSF Application on Oracle WebLogic Server 10.3
My JDeveloper Version is - JDeveloper10.1.3.0.4
I followed Following Links for Deployment
http://download.oracle.com/otn_hosted_doc/jdeveloper/11/demos/wls/wls.html
http://blog.fekw.de/2008/08/23/howto-install-adf-10-runtime-and-deploy-adf-bc-app-to-oracle-weblogic-103-running-on-linux/
I am Getting Following Error
java.lang.NoClassDefFoundError: oracle/xml/parser/v2/XMLParseException
     at oracle.adf.controller.faces.lifecycle.ADFPhaseListener.<clinit>(ADFPhaseListener.java:463)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:711)
     at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:400)
     at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:328)
[ServerConnectionImpl.close():334] : Closing DM connection
[ServerConnectionImpl.close():354] : Unregistered all listeners
Thanks
Vijay Chavan

My bc4j.conf file is like bellow and my datasource name is expertDS
<BC4JConfig>
<AppModuleConfigBag>
<AppModuleConfig name="DeptAMLocal">
<AppModuleJndiName>model.ent.DeptAM</AppModuleJndiName>
<DeployPlatform>LOCAL</DeployPlatform>
<JDBCName>expert</JDBCName>
<ApplicationName>model.ent.DeptAM</ApplicationName>
<jbo.project>Model</jbo.project>
</AppModuleConfig>
<AppModuleConfig name="DeptAMEmbeddedAS">
<jbo.internal.embedded>true</jbo.internal.embedded>
<JDBCDataSource>jdbc/expertDS</JDBCDataSource>
<ApplicationPath>current-workspace-app</ApplicationPath>
<ConnectionPort>23891</ConnectionPort>
<AppModuleJndiName>DeptAMBean</AppModuleJndiName>
<HostName>localhost</HostName>
<java.naming.security.authentication>simple</java.naming.security.authentication>
<java.naming.security.credentials>
<![CDATA[{904}05DDD90D64C79A7BC508C94B403DD81551]]>
</java.naming.security.credentials>
<java.naming.security.principal>oc4jadmin</java.naming.security.principal>
<DeployPlatform>EjbIas</DeployPlatform>
<jbo.server.internal_connection>jdbc/expertCoreDS</jbo.server.internal_connection>
<ApplicationName>model.ent.DeptAM</ApplicationName>
</AppModuleConfig>
<AppModuleConfig name="DeptAMAS">
<jbo.ampool.maxinactiveage>300000</jbo.ampool.maxinactiveage>
<AppServerConnectionName>weblogic</AppServerConnectionName>
<AppModuleJndiName>DeptAMBean</AppModuleJndiName>
<DeployPlatform>EjbIas</DeployPlatform>
<jbo.ejb.txntimeout>86400</jbo.ejb.txntimeout>
<DtMiddleTierDeploymentProfile>../ModelMiddleTier1.deploy</DtMiddleTierDeploymentProfile>
<jbo.security.enforce>Test</jbo.security.enforce>
<jbo.ampool.maxpoolsize>600</jbo.ampool.maxpoolsize>
<ApplicationName>model.ent.DeptAM</ApplicationName>
<DtDeploymentProfile>../ModelEJB1.deploy</DtDeploymentProfile>
<jbo.ampool.doampooling>false</jbo.ampool.doampooling>
<java.naming.security.authentication>simple</java.naming.security.authentication>
<DtCommonDeploymentProfile>../ModelCommon1.deploy</DtCommonDeploymentProfile>
<JDBCDataSource>jdbc/expertDS</JDBCDataSource>
<jbo.server.internal_connection>jdbc/expertCoreDS</jbo.server.internal_connection>
<jbo.ampool.minavailablesize>0</jbo.ampool.minavailablesize>
<ApplicationPath>BackBoneEJB</ApplicationPath>
<jbo.ampool.monitorsleepinterval>10000</jbo.ampool.monitorsleepinterval>
</AppModuleConfig>
</AppModuleConfigBag>

Not Loaded status after deploying a EAR file in Oracle 10g application serv

Hi,
I am deployed a simple ear file in Oracle App Server 10g. The deployment went on well. But when i use the enterprise manager to see the status , it shows 'Not Loaded'.
Can any body kindly give me a suggestion on why this is happening.
Any help is highly appreciated.
Thanks
SK

Hi,
You have to register your Portlet provider.
How to register new portlet in Oracle Portal 10g ?
Here are the steps -
1- Go to your oracle portal home page e.g. http://oracleportal.com/pls/portal
2- Login into the oracle portal by clicking on 'login' link
3- Go to the Builder and then Administer
4- Click on Portlets tab
5- Click on 'Register a Provider' in 'Remote Providers' portlet.
6- Enter the provider URL and other information and click finish. Normally the provider URL for portlets developed using JPDK is in the form of http://[your portal]/[context root]/providers/
Please note that you must have deployed the portlet before trying to register the provider for the portlet.
Best Regards,
Kevin

Can't deploy my app on Sun Java System Application Server Platform Edition

Hi,
I am trying to deploy me app on the Sun's app server but I get the following error:
I am using Sun Java System Application Server Platform Edition 8.2
Invalid Deployment Descriptors in archive jag-ejb.jar in deployment descriptor file META-INF/ejb-jar.xml
Line 29 Column 15 -- The content of element type "session" must match
"(description?,display-name?,small-icon?,large-icon?,ejb-name,home?,remote?,local-home?,local?,ejb-class,session-type,transaction-type,env-entry*,ejb-ref*,ejb-local-ref*,security-role-ref*,security-identity?,resource-ref*,resource-env-ref*)". "It deploys on Orion 2.02
The ejb.xml file is as follows:
<enterprise-beans>
    <session>
      <display-name>Facade stateless session bean</display-name>
      <ejb-name>ejb/PetardsFacade</ejb-name>
      <home>com.jag.petardscmsbeans.interfaces.PetardsFacadeHome</home>
      <remote>com.jag.petardscmsbeans.interfaces.PetardsFacade</remote>
      <local-home>com.jag.businesslogic.interfaces.FacadeLocalHome</local-home
      ><local>com.jag.businesslogic.interfaces.FacadeLocal</local>
      <ejb-class>com.jag.petardscmsbeans.ejb.PetardsFacadeEJB</ejb-class>
      <session-type>Stateless</session-type>
      <transaction-type>Container</transaction-type>
      <resource-ref>
        <res-ref-name>jdbc/OracleDSRES</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
      </resource-ref>
      <env-entry>
        <env-entry-name>DSName</env-entry-name>
        <env-entry-type>java.lang.String</env-entry-type>
        <env-entry-value>jdbc/OracleDSRES</env-entry-value>
      </env-entry>
    </session>
</enterprise-beans>also, in the error message what does ? and * signify?
Thanks

This is an element ordering issue. env-entry is before resource-ref in the schema so it must be declared in the same order.
--ken

How can I deploy JBI Application in Sun Java System Application Server 9?

I developed a demo "Loan Processing Composite Application " in Netbeans.org(http://www.netbeans.org/kb/55/loanprocessing.html).
The guide only show the deployment using Netbeans6.Now I want to deploy it directly using Server9 , how can I do?
How to deploy a soa application in Sun Java System Application Server 9? Is there any doc?
Please~~I'm puzzled.

To deploy a JBI application to Sun's App Server, you will need a JBI compliant ESB installed. OpenESB would be my first choice here. Then as far as installing your components without Netbeans, there are two choices. 1) Copy your SA's to the JBI/ESB autodeploy directory and you binding components and service engines to the JBI/ESB autoinstall directory. 2) Use the ant tasks that the JBI specification (http://jcp.org/en/jsr/detail?id=208) requires for all JBI implementations. OpenESB's JBI tasks are detailed here: http://wiki.open-esb.java.net/Wiki.jsp?page=JBIAntTaskReference. These ant tasks can be wrapped with maven goals if needed.
Jeff

Calling EJB deployed on Weblogic 10.3 from WebSphere Application Server 6

Hi,
We are trying to call an EJB(2.1) deployed in Weblogic 10.3 from WebSphere Application Server 6.
The problem is that the jars containing Weblogic's initial context factory are compiled with JDK5. (Client jar was built as per [http://download.oracle.com/docs/cd/E15051_01/wls/docs103/client/jarbuilder.html] .)
WebSphere is still running on JDK1.4.
Therefore when trying to get the InitialContext to lookup up the bean we get major/minor version errors because of the compiler level mismatch.
Has anyone faced a scenario like this and come up with a solution?
Are there 1.4 jars for Weblogic 10.3 out there?
Any help?
Thanks

Hi Dan,
Yes I am using EJB 3. I saw this thread earlier also but :
1. In my case I am not calling the EJB 3.0 methods directly. I am using a java client (Cataloged as a Java Class Library) which does the lookup and calls the EJB methods. (I am not cataloging and calling the EJB 3.0 methods directly).
2. It is working perfectly fine when the EJB is deployed in Weblogic 10.0 or 10.2.
I am very much new to this so please bear with my small and silly questions! Thanks a lot for you help !
Cheers !
Rajat

How to find using SQL query application deployed on win 7 machines with SCCM 2012 server or user installed manually.

Hi,
how to find using SCCM SQL query, application deployed on win 7 machines with SCCM 2012 server or user/technician installed manually. Please let me know.

Thanks, is it not possible via any script also?
Like Torsten said, how can you tell the difference between CM12 installed applications and locally installed? Once you can answer that, then you can write report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How to deploy on different OC4J than "home" on Application Server

Hi
I've a JSP/Struts Application which runs well in JDeveloper and runs well if deployed to the "home" instance of Oracle Application Server 10g Release 3. However, we want to deploy this Application to a separated OC4J (keeping different Applications separated). So I'm trying to create a second OC4J instance in Application Server in order to deploy my application. This seems to be quite complicated !
Can anyone point me to some information on how to create a new OC4J Instance in Oracle AS 10g with all necessary BC4J- and ADF-Libraries in order to deploy an application?
Thanks

pls use the em website to create the new oc4j stance,you can access em by http://yourashost:1810
then ,you may deploy the project to a ear file and deploy it on new oc4j stance in em website.
maybe i do not make me understood,::)

How to deploy Visual composer applications and set up the server

Hi ,
I have SAP Netweaver developer studio client installed on my Laptop and I can use it to create VC applications but I cannot visualise the applications since I don't have server.
Is there a server that I can install and configure? and what else do I need before I can successfully deploy visual composer applications.
thanks

Hi Bhat,
Please ping server whether it is reachable or not.
Please enter IP and host name in the host file (Start>>Drivers>>etc>>host file)
Then enter host and instance number in NWDS. then open server view through open perspective, it will show you whether server is up or not.
Hope this will helps you.
Regards
Arun

How to deploy the new version of webPart in SharePoint Server 2010

Hi friend's ....I want to deploy the new version of webPart in SharePoint Server 2010. Is there any way for this....? In SharePoint sever 2013 there is version feature available for the apps..Same thing i want in SharePoint Server 2010 for webpart. Please
suggest me....is it possible or not ..?

i am not aware if their is new version option rather i know instead of retract and Re install, you can simply update the solution.
check this: http://blogs.southworks.net/aortega/2010/02/05/sharepoint-2010-how-to-deploy-custom-webparts/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Anyone deployed JSR 168 compliant portlet in SunONE Portal Server 6.1?

Hi,
Anyone deployed JSR 168 compliant portlet in SunONE Portal Server 6.1?
Thanks
Tanmoy

Try following command
pdeploy deploy -u uid=amadmin,ou=People,dc=INDIA,dc=ORGNAME,dc=COM -w adminadmin -p adminadmin -g -v -f PORTALBASE/config/portlet/usermapping.properties C:\HelloWorld\dist\HelloWorld.war
Thanks

How to deploy a WAR file to Sun One Portal Server

Would someone please tell me the instruction of how to deploy a WAR file to Sun One Portal Server 6.2. Thank you.

I would advise against this. We tried that and it totally hosed the server.xml file and took our staging portal server down.
I have no idea what was "in" the server.xml or other files, but trying to deploy a .war file using the WS admin interface hosed portal server's settings.

Deploying IPCCx 8.x on HP DL380 G4 server

Similar Messages

Maybe you are looking for