Deploying swf with resources into a single sis on Nokia

Hi finally i have my first question on the mobile forum . I am trying to package a sis file which will contain the main swf and a settings text file.
The problem is the i have to compile them to deliver both together on Nokia device for flash lite 2.1. There is not a single decent packager out there as o see that solves my issue.
Generally i use Nokia carbide. Here is a glimpse of my PKG file:
; Add any installation notes if applicable
;"MobiStore.txt" -"!:\private\E4B653CF\MobiStore.txt"
;required for application to be covered by backup/restore facility
"..\sis\backup_registration.xml" -"!:\private\E4B653CF\backup_registration.xml"
;Add all the files needed by your flash app here. don't forget to set correct folder names!
"..\data\MobiStore.swf" - "!:\private\E4B653CF\MobiStore.swf"
"..\data\settings.txt" - "!:\private\E4B653CF\settings.txt"
Now what happens is that after the application installs on a actual Nokia device It gives error "private\E4B653CF\settings.txt" Not found !!
I confirm that the file is there manually but the swf cannot find it. In the swf i load the file "settings.txt" using loadvars.load method and providing just the file name "settings.txt", no sub-folders or anything. So basicaly the file "MobiStore.swf" and "settings.txt" are in same folder but when i run the application it says:
"private\E4B653CF\settings.txt" Not found !!
I will really appreciate if some one can help me out with this. How to package a swf with resource files into sis and deploy on a real device.

Hey,
i have the same problem. Flash Lite 3.1., N97 The application is published with network only. I have even tried local only with same results.
When i try to load an image with loadMovie(image.jpg), image is not show. But this only occurs when the application is installed on E:/private/UID/. If i install the application on C:, everything is working ok.
Also same problem with loading images from http://127.0.0.1:8888/GetImage/image.png. If installed on E:, images are not shown, but if installed on C:, all images are visible. Is this problem with security? My servlet http://127.0.0.1:8888/crossdomain.xml is never called.
Simon

Similar Messages

Is it possible to deploy multiple apps(ContextRoots) into a single stack?

Hi,
We want to deploy multiple Application Codes with different Context Roots to a single JavaStack using SDM. The purpose for it is to support our multiple Test environments(AIT, AFT, Prod Regression or etc.) using a single JavaStack environment. AIT will have AIT Context Root, AFT will have AFT Context Root and etc. Is it possible to do so? If so, how can we configure the SDM to support the deployment? We already know how to change the *.xml file for different context root.
Thanks
J

If the structure of the Excel sheets does not change from file to file then you can by having one ForEach Loop processing always the "Enrolled" sheet and another always the "Engaged" this is doable because the Excel OLEDB connector allows
to pick individual sheets, it is problematic therefore when sheet names themselves change.
MSDN has an example: https://msdn.microsoft.com/en-ca/library/ms345182.aspx
Arthur
MyBlog
Twitter

Load SWF with instances into MC

Hello,
I have a SWF called "player.swf", and it contains instances
like: "head", "body" etc...
I want to load that SWF into another SWF
("display_player.swf"), and to load ANOTHER SWF to replace the
"head" instance, like:
"_root.p" is a transparent red colored movie clip inside
"display_player.swf"
I tried doing this:
_root.p.loadMovie("player.swf");
trace(_root.p.head);
"_root.p" said to be "_level0.p" and is displayed correctly,
but "_root.p.head" said to be undefined (NaN)...
Does anyone has an idea on how to load a SWF inside a movie
clip, and use it's instances?

The point here is to demostrate, or at least determine, what
the problem is. I have stated that it is probably likely that you
are making the call to _root.p.head previous to it being
instatiated on the timeline. you must wait for the swf to load
before the clip within the loaded swf can be made available to
target. A better method would be to use the MovieClipLoader class,
and then use the onLoadInit handler, this handler is displatched
when the swf becomes available to the timeline, then within the
handler you could call your trace, or load into the 'head' instance
at the correct time.
I have made an example to demostrate this, using
representations of you clips and swfs:
HERE
PS. launch the items from within the folder.

Please help: deploy Bean with "No resource available" error for M:N relationship

Hi all,
I wonder any one comes across with deploying beans with M:N relationship with
"No resource available".
I defined the relationship in ejb-jar.xml and dbms in the
weblogic-cmp-rdbms-jar.xml, but when I deployed the beans I got
the following error
------ Error message-----
weblogic.common.ResourceException: No resources available at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:568) at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:400) at weblogic.common.internal.ResourceAllocator.reserveNoWait(ResourceAllo
cator.java:368) at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.j
ava:166) at weblogic.jdbc.common.internal.ConnectionPool.reserveNoWait(Connection
Pool.java:127) at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiData
Source.java:194) at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:219) at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSP
ersistenceManager.java:317) at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.createDefaultDBMSTab
le(RDBMSPersistenceManager.java:1149) at weblogic.ejb20.utils.TableVerifier.verifyTableExistsAndCreateMaybe(Ta
bleVerifier.java:428) at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.verifyTablesExist(RD
Unable to deploy EJB: CustomerBean from \ejb:
Errors encountered ''The Container-Managed Persistence Entity EJB failed while
creating its SQL Type Map. The error was: Invalid object name 'localcustomer_localsubscription'.
Severity 16, State 1, Procedure 'IVM_SERVER null', Line 1', 'Error encountered
while attempting to create Default DBMS Table: 'localcustomer_localsubscription'.
Error Text: 'weblogic.common.ResourceException: No resource s available'.''
---------------End error ----------------------
---------------my ejb-jar.xml
<ejb-jar>
- <enterprise-beans>
- <entity>
<ejb-name>AddressBean</ejb-name>
<local-home>customer.LocalAddressHome</local-home>
<local>customer.LocalAddress</local>
<ejb-class>customer.AddressBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
- <cmp-field>
<field-name>addressID</field-name>
</cmp-field>
- <cmp-field>
<field-name>street</field-name>
</cmp-field>
- <cmp-field>
<field-name>city</field-name>
</cmp-field>
- <cmp-field>
<field-name>zip</field-name>
</cmp-field>
- <cmp-field>
<field-name>state</field-name>
</cmp-field>
<primkey-field>addressID</primkey-field>
</entity>
- <entity>
<ejb-name>CustomerBean</ejb-name>
<local-home>customer.LocalCustomerHome</local-home>
<local>customer.LocalCustomer</local>
<ejb-class>customer.CustomerBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>CustomerBean</abstract-schema-name>
- <cmp-field>
<field-name>customerID</field-name>
</cmp-field>
- <cmp-field>
<field-name>firstName</field-name>
</cmp-field>
- <cmp-field>
<field-name>lastName</field-name>
</cmp-field>
<primkey-field>customerID</primkey-field>
- <query>
- <query-method>
<method-name>findByLastName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
- <query>
- <query-method>
<method-name>findByFirstName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
</entity>
- <entity>
<ejb-name>SubscriptionBean</ejb-name>
<local-home>customer.LocalSubscriptionHome</local-home>
<local>customer.LocalSubscription</local>
<ejb-class>customer.SubscriptionBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>SubscriptionBean</abstract-schema-name>
- <cmp-field>
<field-name>type</field-name>
</cmp-field>
- <cmp-field>
<field-name>title</field-name>
</cmp-field>
<primkey-field>title</primkey-field>
- <query>
- <query-method>
<method-name>findAllSubscriptions</method-name>
<method-params />
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM SubscriptionBean AS o
]]>
</ejb-ql>
</query>
</entity>
</enterprise-beans>
- <relationships>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalAddress</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomer-Has-LocalAddresss</ejb-relationship-role-name>
<multiplicity>one</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>addresses</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalAddress-Has-LocalCustomer</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>AddressBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customer</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalSubscription</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomers-Have-LocalSubscriptions</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>subscriptions</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalSubscriptions-Have-LocalCustomers</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>SubscriptionBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customers</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
</relationships>
- <assembly-descriptor>
- <container-transaction>
- <method>
<ejb-name>AddressBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>CustomerBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>SubscriptionBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
------------------End of ejb-jar.xml---------------
Please help
Thanks in advance
Mike

Hi Gaurav,
Other applications used the same the datasource, which I used for this application,
are running fine.
I think there is some bug in the wlserver 6.1 to create the join table. I think
it is the time I should ask the bea wlserver 6.1.
Mike
"Gaurav Khanna" <[email protected]> wrote:
This implies that there are no database connections available. You need
to
check if you can log into your database instance. By default there are
30
connections specified for an instance in Oracle. FYI.
"Mike" <[email protected]> wrote in message
news:[email protected]...
Hi all,
I wonder any one comes across with deploying beans with M:Nrelationship with
"No resource available".
I defined the relationship in ejb-jar.xml and dbms in the
weblogic-cmp-rdbms-jar.xml, but when I deployed the beans I got
the following error
------ Error message-----
weblogic.common.ResourceException: No resources available atweblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:568) atweblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:400) atweblogic.common.internal.ResourceAllocator.reserveNoWait(ResourceAllo
cator.java:368) atweblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.j
ava:166) atweblogic.jdbc.common.internal.ConnectionPool.reserveNoWait(Connection
Pool.java:127) atweblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiData
Source.java:194) atweblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:219) atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSP
ersistenceManager.java:317) atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.createDefaultDBMSTab
le(RDBMSPersistenceManager.java:1149) atweblogic.ejb20.utils.TableVerifier.verifyTableExistsAndCreateMaybe(Ta
bleVerifier.java:428) atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.verifyTablesExist(RD
Unable to deploy EJB: CustomerBean from \ejb:
Errors encountered ''The Container-Managed Persistence Entity EJB failedwhile
creating its SQL Type Map. The error was: Invalid object name'localcustomer_localsubscription'.
Severity 16, State 1, Procedure 'IVM_SERVER null', Line 1', 'Errorencountered
while attempting to create Default DBMS Table:'localcustomer_localsubscription'.
Error Text: 'weblogic.common.ResourceException: No resource savailable'.''
---------------End error ----------------------
---------------my ejb-jar.xml
<ejb-jar>
- <enterprise-beans>
- <entity>
<ejb-name>AddressBean</ejb-name>
<local-home>customer.LocalAddressHome</local-home>
<local>customer.LocalAddress</local>
<ejb-class>customer.AddressBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
- <cmp-field>
<field-name>addressID</field-name>
</cmp-field>
- <cmp-field>
<field-name>street</field-name>
</cmp-field>
- <cmp-field>
<field-name>city</field-name>
</cmp-field>
- <cmp-field>
<field-name>zip</field-name>
</cmp-field>
- <cmp-field>
<field-name>state</field-name>
</cmp-field>
<primkey-field>addressID</primkey-field>
</entity>
- <entity>
<ejb-name>CustomerBean</ejb-name>
<local-home>customer.LocalCustomerHome</local-home>
<local>customer.LocalCustomer</local>
<ejb-class>customer.CustomerBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>CustomerBean</abstract-schema-name>
- <cmp-field>
<field-name>customerID</field-name>
</cmp-field>
- <cmp-field>
<field-name>firstName</field-name>
</cmp-field>
- <cmp-field>
<field-name>lastName</field-name>
</cmp-field>
<primkey-field>customerID</primkey-field>
- <query>
- <query-method>
<method-name>findByLastName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
- <query>
- <query-method>
<method-name>findByFirstName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
</entity>
- <entity>
<ejb-name>SubscriptionBean</ejb-name>
<local-home>customer.LocalSubscriptionHome</local-home>
<local>customer.LocalSubscription</local>
<ejb-class>customer.SubscriptionBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>SubscriptionBean</abstract-schema-name>
- <cmp-field>
<field-name>type</field-name>
</cmp-field>
- <cmp-field>
<field-name>title</field-name>
</cmp-field>
<primkey-field>title</primkey-field>
- <query>
- <query-method>
<method-name>findAllSubscriptions</method-name>
<method-params />
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM SubscriptionBean AS o
]]>
</ejb-ql>
</query>
</entity>
</enterprise-beans>
- <relationships>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalAddress</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomer-Has-LocalAddresss</ejb-relationshi
p-role-name>
<multiplicity>one</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>addresses</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalAddress-Has-LocalCustomer</ejb-relationship
-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>AddressBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customer</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalSubscription</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomers-Have-LocalSubscriptions</ejb-rela
tionship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>subscriptions</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalSubscriptions-Have-LocalCustomers</ejb-rela
tionship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>SubscriptionBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customers</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
</relationships>
- <assembly-descriptor>
- <container-transaction>
- <method>
<ejb-name>AddressBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>CustomerBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>SubscriptionBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
------------------End of ejb-jar.xml---------------
Please help
Thanks in advance
Mike

Inserting dashboards into a single master SWF

Hello experts,
I have an issue in merging dashboards into a single SWF file. Currently i have seven dashboards exported to BOE as SWF/flash files . All are working fine in BOE. Now i need to emmbed all of them in a single swf file. How could i do it.
Current procedure which i am following: I structured OPENDOUCMENT URL for all those seven dashboards in BOE. next, i designed a dashboard with seven slides with label based menu. each of that seven slides are mapped to respective open document URL. might i am wrong . please any one tyhrow some some light in my case.
Thanks
Prashanth

We are XI 3.1. We use the download document and url and include the CELogonToken when linking to child swfs, e..g
/Xcelsius/opendoc/documentDownload?sIDType=CUID&iDocID=AU_zADSPisZFqkKz6eCzKAY&sKind=Flash&CELogonToken=&Mode=INFOVIEW&BusinessArea=
In the example above, BusinessArea is a variable and is used to pass a value from the parent swf to the child swf.
You need to exercise some care in this swf within swf approach, e.g. if you have QaaWs running in to think about when you want the queries in teh child swf to be triggered, e.g. everytime you go to the child, or only if the user has selected a new value to be passed.
Personally, I think this type of multi-dashboard deliverable is better handled by pulling the multiple Xcelsius dashboards together inside a portal tool, or if you are at XI 3.1, use the Dashboard Builder functionality to pull all the Xclesius together. I hadn't thought about pulling them together using ppt, but that sounds like an option too.
SAP's Brad Welch did a webinar in June or July 2009 showing Dashboard Builder to pull together Xcelsius, WebI, web pages, pictures, together. Might be worth a look
http://www.sdn.sap.com/irj/scn/events?rid=/webcontent/uuid/b04f7e1e-981c-2c10-9898-860238a6388d [original link is broken]
I hadn't seen much about the repositioning of the Dashboard Builder tool as something to use to pull together Xcelsius and other content, but in reviewing content from the 2009 Bus Obj User Conference, I saw it mentioned in at least 4 different presenations, some from SAP folks, and feel better about developing with it more.

Merging all DB scripts into a single script for deployment

Hi,
I'm using an Oracle Database Project in Visual Studio to store single scripts for each database object, which I like a lot. What I don't know is how to merge all those scripts into a single script now that I'm ready for deployment. I would prefer to give the DBA guy a single script with all the objects and not one script per DB object.
Is there any way to achieve this?
Julio

Hi,
I'm playing with this stuff these days and Yes, there is a possibility:
Under Visual Studio:
Open your Database Edition Project
Goto "Server Explorer"
You should have previously created a connection to your Target DB.
Open that connection. you have a collection of folders.
Select/Open the Schema Folder, then the Tables Folder.
Select the Tables you want to Script, right-click and select "Generate Create Script to Project".
Enter a Scriptname and click OK
That's all.
Going back to your Project, you shuld find a Script into your "Script" Folder.
The problem is that you cannot create separate Scripts when selecting multiple tables, as I stated in my Post "ODT lacks some functionnalities"
Hope it helps
Rgds
P.Cury

Ability to process several raw files with the same content but with different exposure into the single picture

Can you add to the Lightroom an ability to process several raw files with the same content but with different exposure into the single picture?
Base raw files can be given with exposure bracketing during shooting, for example.
The goal - to get maximum details in darks and lights (if we use the "ligths recovery" or "fill lights" we lose the quality because raw file just have no all required information).
The similar (but not the same, only the idea) thing - is High Dynamic Range Photography in Adobe Photoshop
Thank you

The plugin LR/Enfuse does this already. And of course Photomatix have a plugin available for Lightroom. This essentially amounts to pixel editing, which is beyond the range of Lightroom's metadata editing.

Is it possible to import a SWF with a transparent background into Catalyst?

Hi,
Here's what I'm hoping to happen. I've created presentation in Catalyst and I was hoping to import an animation I created in Flash into the title screen of the presentation in Catalyst. Problem is, I don't want the background from the SWF to cover the background of the presentation in Catalyst. I know that you can make a SWF appear transparent in an HTML file using the "window mode" when publishing a SWF from Flash. Is this at all possible?
Thanks!

I figured it out. And yeah, it is possible. The way I did it was to publish the SWF with the HTML file while making sure that the window mode is set to transparent. I then was able to import the SWF to my library in Catalyst without the background and then use multiple instances of it. Works great.

Creating pdfs from different file types (.doc,.xls etc) and merging them into a single pdf with book

Hi,
I need to create a pdf from 2 different file formats, for example .doc and .xls file and merge the contents of the two files into a single pdf.Also the final pdf created must contain bookmarks and links. Thanks in advance.
Priyanka

You can do this on the desktop using the Acrobat SDK as a custom plugin.
You can do this on a server with Adobe LiveCycle PDF Generator.

Collapse multiply layers with different transparency into a single solid filled layer

Hi,
I want to collapse a complex scene with all different layers and different transparency into a single layer (or as few as possible) to optimize the flash file for online (were experince proformance issues).
I have tried the combine and manually copying pasting into one layer but it cuts the fill below and replace with transparent fill. I want to have a end file that is 100% solid.
Is this possible?
Thank you
Darren

You can create groups and then paste all your groups in a single layer. That won't 'cut' them into each other and the transparency should be maintained. It won't help you with performance though, since the complexity remains the same.
If you have tons of complex vector shapes, it might be a good idea to create a transparent PNG bitmap from illustrator.
That may increase your filesize but it will give you a tremendous performance boost.

Is it possible to merge images from 4 different folders into a single 4x4 image with ps scripting?

So I have four folders that each contain 970 images. The images in folder 1 are named exactly the same as the images in folder 2, 3, and 4. All the images are also 400px in size. What I'm trying to do is take all images of the same name from each of the 4 folders and put them into a single 800x800 images so that they are arranged in a 4x4 fashion.
Example: Each folder has an image named mastiff1.psd. All four mastiff images are different, but have the same name, and are the same size. I'd like all four mastiff images to be combined into one double-size image that has all four of the mastiff images on it and save as mastiff1-4x4.
Is that something that photoshop scripting could do? I'm a newb to this. I've used actions plenty, but never scripting.

To script well you need to know a scripting programming language either JavaScript which works on both Photoshop Platforms or AppleScript which will only Apple Mac machines, Or VSbasic which will only run on windows. You must also know how Photoshop works and know how to use Photoshop well.
There are some things that can not be scripted for Adobe DOM does not have interfaces methods for all of Photoshop's features. However there is an Adobe Plug-in with the name Scriptlistener witch is like a script recorder anything you do in Photoshop that can be recorded in actions will be recorded into two logs on you desktop when the Scriptlistener plug-in is installed one is in JavaScript syntax the other in VSbasic. Like Actions there is no logic just hard coded step, step, step... The code uses the Action Manager to do the Photoshop function. So things that can not be scripted using Adobe DOM can be scripted using Action Manager code produced by the Scriptlistener Plug-in and the hard coded steps can be modifies into javascript functions that use variables.
I feel what you want to do would be a real ambitious first Photoshop script. Adobe scripting documentation, sample script and Scriptlistener are not part of the standard install. You must download these from Adobe. Adobe Photoshop Scripting | Adobe Developer Connection.
I don't actually know javascript but I can hack at it. Have done some document layout scripts. Most require a PSD template but PasteImageRoll does not but all Image must come from the same folder. Most of my fully automated script require all image to be in the same folder. However two of my scripts are interactive. You can select each image to be layout from anywhere. Images will be automatically re-sized and positioned which you can then tweak.
I'm not the best coder still you may want to look ate the code I came up with.
Paste Image Roll Script and Picture Package Support
Photo Collage Toolkit UPDATED Made Rotate for Best Fit an option in PasteImageRoll.jsx Edit to customize your default settings.
Photoshop scripting is powerful and I believe this package demonstrates this.
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
There are twelve scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
PCTpreferences.jsx - Edit This File to Customize Collage Populating scripts default setting and add your own Layer styles.
Documentation and Examples

Multiple files (with same message type) into a single file

Dear All,
I am having multiple files(same message type) with details like header data and its line item details in each file. The structure of all the files will be:
File1    File2   File3
H1        H2      H3
L1         L1      L1
L2
L3
Now my requirement is that after every 10 hours all the files should be picked and merged (append) into a single file as target file. The structure of output file will be now like
H1
L1
L2
L3
H2
L1
H3
L1
Kindly guide on how to proceed on this with BPM or without BPM
Regards,
NJ

Now my requirement is that after every 10 hours all the files should be picked and merged
(append) into a single file as target file.
Check the use of "Availability Time Planning" of the adapter in your case
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
If your requirement is to append you can do so by using the File Construction mode as Append in receiver File adapter
If your req is to do a N:1 mapping (i.e. merger) then develop a mapping program accordingly...
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 3, 2009 10:30 AM

Need help with query joining several tables into a single return line

what i have:
tableA:
puid, task
id0, task0
id1, task1
id2, task2
tableB:
puid, seq, state
id0, 0, foo
id0, 1, bar
id0, 2, me
id1, 0, foo
id2, 0, foo
id2, 1, bar
tableC:
puid, seq, date
id0, 0, 12/21
id0, 1, 12/22
id0, 2, 12/22
id1, 0, 12/23
id2, 0, 12/22
id2, 1, 12/23
what i'd like to return:
id0, task0, 12/21, 12/22, 12/22
id1, task1, 12/23, N/A, N/A
id2, task2, 12/22, 12/23, N/A
N/A doesn't mean return the string "N/A"... it just means there was no value, so we don't need anything in this column (null?)
i can get output like below through several joins, however i was hoping to condense each "id" into a single line...
id0, task0, 12/21
id0, task0, 12/22
id0, task0, 12/23
id1, task1, 12/23
is this possible fairly easily?
Edited by: user9979830 on Mar 29, 2011 10:53 AM
Edited by: user9979830 on Mar 29, 2011 10:58 AM

Hi,
Welcome to the forum!
user9979830 wrote:
what i have:...Thanks for posting that so clearly!
Whenever you have a question, it's even better if you post CREATE TABLE and INSERT statements for your sample data, like this:
CREATE TABLE     tablea
(       puid     VARCHAR2 (5)
,     task     VARCHAR2 (5)
INSERT INTO tablea (puid, task) VALUES ('id0', 'task0');
INSERT INTO tablea (puid, task) VALUES ('id1', 'task1');
INSERT INTO tablea (puid, task) VALUES ('id2', 'task2');
CREATE TABLE     tablec
(       puid     VARCHAR2 (5)
,     seq     NUMBER (3)
,     dt     DATE          -- DATE is not a good column name
INSERT INTO tablec (puid, seq, dt) VALUES ('id0', 0, DATE '2010-12-21');
INSERT INTO tablec (puid, seq, dt) VALUES ('id0', 1, DATE '2010-12-22');
INSERT INTO tablec (puid, seq, dt) VALUES ('id0', 2, DATE '2010-12-22');
INSERT INTO tablec (puid, seq, dt) VALUES ('id1', 0, DATE '2010-12-23');
INSERT INTO tablec (puid, seq, dt) VALUES ('id2', 0, DATE '2010-12-22');
INSERT INTO tablec (puid, seq, dt) VALUES ('id2', 1, DATE '2010-12-23');This way, people can re-create the problem and test their ideas.
It doesn't look like tableb plays any role in this problem, so I didn't post it.
Explain how you get the results from that data. For example, why do you want this row in the results:
PUID TASK DT1        DT2        DT3
id0   task0 12/21/2010 12/22/2010 12/22/2010rather than, say
PUID TASK DT1        DT2        DT3
id0   task0 12/22/2010 12/21/2010 12/22/2010? Does 12/21 have to go in the first column because it is the earliest date, or is it because 12/21 is related to the lowest seq value? Or do you even care about the order, just as long as all 3 dates are shown?
Always say what version of Oracle you're uisng. The query below will work in Oracle 9 (and up), but starting in Oracle 11, the SELECT ... PIVOT feature could help you.
i can get output like below through several joins, however i was hoping to condense each "id" into a single line... Condensing the output, so that there's only one line for each puid, sounds like a job for "GROUP BY puid":
WITH     got_r_num     AS
     SELECT     puid
     ,     dt
     ,     ROW_NUMBER () OVER ( PARTITION BY puid
                               ORDER BY         seq          -- and/or dt
                       )         AS r_num
     FROM    tablec
--     WHERE     ...     -- If you need any filtering, put it here
SELECT       a.puid
,       a.task
,       MIN (CASE WHEN r.r_num = 1 THEN r.dt END)     AS dt1
,       MIN (CASE WHEN r.r_num = 2 THEN r.dt END)     AS dt2
,       MIN (CASE WHEN r.r_num = 3 THEN r.dt END)     AS dt3
,       MIN (CASE WHEN r.r_num = 4 THEN r.dt END)     AS dt4
FROM       tablea    a
JOIN       got_r_num r ON   a.puid = r.puid
GROUP BY a.puid
,            a.task
ORDER BY a.puid
;I'm guessing that you want the dates arranged by seq; that is, for each puid, the date related to the lowest seq comes first, regardless of whther that date is the earliest date for that puid or not. If that's not what you need, then change the analytic ORDER BY clause.
This does not assume that the seq values are always consecutive integers (0, 1, 2, ...) for each puid. You can skip, or even duplicate values. However, if the values are always consecutive integers, starting from 0, then you could simplify this. You won't need a sub-query at all; just use seq instead of r_num in the main query.
Here's the output I got from the query above:
PUID TASK DT1        DT2        DT3        DT4
id0   task0 12/21/2010 12/22/2010 12/22/2010
id1   task1 12/23/2010
id2   task2 12/22/2010 12/23/2010As posted, the query will display the first 4 dts for each puid.
If there are fewer than 4 dts for a puid, the query will still work. It will leave some columns NULL at the end.
If there are more than 4 dts for a puid, the query will still work. It will display the first 4, and ignore the others.
There's nothing special about the number 4; you could make it 3, or 5, or 35, but whatever number you choose, you have to hard-code that many columns into the query, and always get that many columns of output.
For various ways to deal with a variable number of pivoted coolumns, see the following thread:
PL/SQL
This question actually doesn't have anything to do with SQL*Plus; it's strictly a SQL question, and SQL questions are best posted on the "SQL and PL/SQL" forum:
PL/SQL
If you're not sure whether a question is more of a SQL question or a SQL*Plus question, then post it on the SQL forum. Many more people pay attention to that forum than to this one.

I could use Ipod Classic (30g) controls with connection to Highlander (adapter plug into JBL single CD player), but cannot with new 160g Ipod Classic. What gives?

I could use Ipod Classic (30g) controls with connection to Highlander (adapter plug into JBL single CD player), but cannot with new 160g Ipod Classic. What gives?

Charge it up fully. Toggle the hold switch. Try getting into diagnostics mode again. See Corrupt iPod classic.
tt2

Lync 2013 Hybrid deployment with resource forest scenario on-premise

Hi there,
Im starting to deploy this scenario of Lync on-premise in resource forest with Lync Online:
I´am not finding any documentation about this specific scenario. I wish to know how the flow between forests will be to have users in lync online and users on premise.
Thank you very much in advance for your help.
Joaquin Gonzalez

Hi Joaquin,
You need to deploy Microsoft Forefront Identity Manager (FIM) 2010 to manage the life cycle of user accounts.
In a resource forest topology, one forest is dedicated to running server applications, such as Microsoft Exchange Server and Lync Server. The resource forest hosts the server applications and a synchronized representation of the active user object, but it
does not contain logon-enabled user accounts. The resource forest acts as a shared services environment for the other forests where user objects reside. The user forests have a forest-level trust relationship with the resource forest. When you deploy Lync
Server in this type of topology, you create one disabled user object in the resource forest for every user account in the user forests. If Microsoft Exchange is already deployed in the resource forest, the disabled user accounts might already exist. A directory
synchronization product, such as MIIS, Microsoft Forefront Identity Manager (FIM) 2010, or Microsoft Identity Lifecycle Manager (ILM) 2007 Feature Pack 1 (FP1), manages the life cycle of user accounts. When a new user account is created in one of the user
forests or a user account is deleted from a forest, the directory synchronization product synchronizes the corresponding user representation in the resource forest.
Click the links below for more information.
Supported Active Directory topologies in Lync Server 2013
http://technet.microsoft.com/en-us/library/gg398173.aspx
Windows Azure Active Directory Connector for FIM 2010 R2 Quick Start Guide
http://technet.microsoft.com/en-us/library/dn511002(v=ws.10).aspx
Hope it can be helpful.
Best regards,
Eric

Deploying swf with resources into a single sis on Nokia

Similar Messages

Maybe you are looking for