I could use Ipod Classic (30g) controls with connection to Highlander (adapter plug into JBL single CD player), but cannot with new 160g Ipod Classic. What gives?

Charge it up fully. Toggle the hold switch. Try getting into diagnostics mode again. See Corrupt iPod classic.
tt2

Similar Messages

Am connected to orange fr, i can d/load emails etc but cannot open any webpages, Ipod Touch 5th version, latest IOS installed. Any advise please. First time I have experienced this as my Ipod works immediately elsewhere

I am connected to Orange fr, I can download emails etc but cannot open any webpages. Ipod Touch 5th vers, latest IOS installed, any advice would be most welcome. This is the first time I have had this problem as my Ipod works immediately everywhere else. My laptop does not show this problem using the same orange provider, so its obviously some setting in the Ipod :-(

Try this:
1. Double-click the Home button to reveal Task Bar at bottom
2. Hold the Safari app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Re-launch the app and test
Note: If necessary close all apps in the Task Bar

My ipod is locked to where it has to be plugged into itunes to fix it, but our computer crashed, so itunes is no longer available, and it won't work. What should i do?

this is not my ipod. it is my friend's. her computer crashed and itunes was destroyed. how can i fix it?

You need a computer with iTunes and an internet connection. First redownload all apps on the new computer. See:
How to redownload purchased apps from the App Store
Then connect the iPod to the computer and try to restore the iPod via iTunes. You will be asked to enter the passcode. If you have the passcode you may be able to make a backup. If so then backuop it by right clicking on the iPod in iTunes and select backup. Then restore from backup. If the passcode is unknown they you will have to place the iPod in recovery mode and then restore it . You will have to restore to factory defaults since the computer does not have a backup.

HT1212 my ipod touch has been disabled and needs to be plugged into itunes to reset it. However, the computer it was last synched with has broken and I don't know what to do!

my ipod touch has been disabled and needs to be plugged into itunes to reset it. However, the computer it was last synched with has broken and I don't know what to do!

You need to place the device in recovery mode.
Instructions here > iOS: Unable to update or restore
"If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present"

HT3382 With a MacbookAir (mid-2012) using a mini DisplayPort to VGA adapter plugged into the Thunderbolt port, can you configure the external monitor to FULLY display in portrait mode yet keep the built-in display in landscape mode?

With an 11"-inch Macbook Air (mid-2012) using a mini DisplayPort-to-VGA adapter plugged into the Thunderbolt port:
Can you configure an extended desktop with an external monitor (20") displaying full portrait mode (1200 x 1600 resolution) and keep the built-in display in landscape?
I'd like to see something like
External monitor / Built-in display

Yes, I can't see why not.
Just give it a try and report back if you have a problem.

I have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7.

A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! Nothing seems to work! HELP! :/

A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! I have done this a few times and nothing seems to work! HELP! :/

Transfer all of your content to the computer:
Tunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
http://support.apple.com/kb/HT1848
Then try turning the device off and on again. I'd leave it off for 10-15 minutes, but that is up to you:
http://support.apple.com/kb/HT1430
If the item is still there, you may need to restore the device:
http://support.apple.com/kb/HT1414
Hope that helps . Worst case scenario, you may need to write into iTunes support to see if they can also help!!

My iphones and ipods no longer show up as devices when I plug into my computer to use itunes

Does anyone know why my iPhone and iPod no longer show up as devices when I plug into my computer to use iTunes?

Hi jacquelinex,
Welcome to the Apple Support Communities!
If your devices are not showing up in iTunes I suggest your read over and follow the troubleshooting steps in the attached article.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Have a great day,
Joe

HT4972 My ipods screen is black and wont turn on unless plugged into the wall

My ipods screen is black and wont turn on unless plugged into the wall not the computer but when i plug it into the computer and put it in DFU mode it wont restore there is an error 3194 and error 1602 and nothing i do helps

Here's what I found about error 1602:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert,update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194 is also seen when somebody is trying to restore jailbroken devices.

I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS. I heard there was a plug-in to download for this, but cannot find it. Help?

I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS. I heard there was a plug-in to download for this, but cannot find it. Help?

You would need at least CS3 with ACR 4.6 to natively edit NEFs from a D90 in PS:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
It might also work to use the DNG Converter 4.6 or newer to convert the NEF files to DNGs and then those might open in your older CS2 ACR, but I’m not sure, since it’s a 9 year old program I haven’t used in years.
The DNG Converter can be found, here:
http://www.adobe.com/downloads/updates.html

I have an iPhone 5, yesterday it wasn't receiving any signal. I reset it and when it cam back on it said plug into iTunes, i did that but now it comes up with error 9006 and 39. What do i do, i have tried different wires, and different plug

I have an iPhone 5, yesterday it wasn't receiving any signal. I reset it and when it cam back on it said plug into iTunes, i did that but now it comes up with error 9006 and 39. What do i do, i have tried different wires, and different plug in holes, I've left it for the night and tired again this morning.

Error code 9006 is related to the computer's security software settings, 39 is not listed inResolve iOS update and restore errors try turning the security/anti-virus software off if you are using something like that. Then you may need to restore via the recovery mode since that is what the graphic of a USB wire connecting to iTunes means, it has already entered recovery mode...see http://support.apple.com/kb/HT1808 for instructions on recovery mode restoring.

Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit. I have the iPhoto app but pictures not being seen on iPad. So incredibly frustrating. Apple please fix this.

Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit. I have the iPhoto app but pictures not being seen on iPad. So incredibly frustrating. Apple please fix this.

Do you have a smaller capacity micro SD card to try? I seem to remember from past posts that users were having problems with cards larger than 32GB, however, Apple's page doesn't mention this.
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
What format are the pics - jpg or raw?
 Cheers, Tom

When I send an email with picture attachment it is received by my gmail account but not received by applel mail. What gives?

Recently installed Mavericks. Now when I send an email with picture attachment it is received by my gmail account but not received by applel mail. What gives?

Hi Bigt101,
It will be great, if you can provide me with the following info.
which Model printer are you using.
Are you registered to the e-print center.
What email client are you using.
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

Using mountain lion operating system, downoaded iphoto 9.4 update, aperature 3.4.3 update and still cannot access photo stream. now what??

Using mountain lion operating system, downoaded iphoto 9.4 update, aperature 3.4.3 update and still cannot access photo stream. now what??

With Aperture, you should be able to use Photo Stream now, but you need iPhoto 9.4.2 > http://support.apple.com/kb/DL1608
After updating iPhoto to the latest version, open System Preferences > iCloud and tick Photo Stream. Finally, you will have to turn on Photo Stream on iPhoto and Aperture choosing Photo Stream on the sidebar of both programmes

How do I use time machine to backup to an external hard drive plugged into my airport extreme

How do I use time machine to backup to an external hard drive plugged into my airport extreme? I used to be able to but now time machine will not recognize my hard drive to select as a backup when plugged into my airport extreme. I'm not sure what happened or changed. Any help is greatly appreciated. Thanks

First thing to do is go to the Pondini tips page, then follow the link to his full TM site for all the details.

I could use Ipod Classic (30g) controls with connection to Highlander (adapter plug into JBL single CD player), but cannot with new 160g Ipod Classic. What gives?

Similar Messages

Maybe you are looking for