Deployment issue with multi-SSO

Hi
We have OAM 10.1.4.3 deployed and as part of integrating applications in a SSO environment , there is an application that does not meet the webgate compatibility requirement and hence we are planning to go down the custom access gate approach. Now based on the documentation, it appears if the custom access gate is deployed , there is no supported configuration to provide a multi-domain SSO functionality. So if the host on which the custom access gate is deployed on , has a domain xyz.com and if the rest of OAM protected apps by OOTB webgates reside on xyz.net , and in such a scenario does the statement below still hold true, if we'd like to have SSO implemented across all the applications ?
"Multi-domain single sign-on works only with WebGates, not AccessGates. For example, the applications discussed in "Application Single Sign-On" have their own single sign-on methods. To integrate a scheme for AccessGate-based single sign-on with a scheme for WebGate-based multi-domain single sign on, you need to configure a proxy to act as a front end for these AccessGates."
Thanks.

Hi Steve,
Yes, having a reverse proxy and then installing a webgate on that server is going to be the least painful. Of course, in the custom accessgate, you have control over how the accessgate should behave and in theory you can code in the handling for the multi-domain SSO.
-Vinod

Similar Messages

URGENT HELP PLS : Issue with Multi Level Master Detail block

This is an issue someone else had posted in this forum few years back but there was no solution mentioned, I have run into this same issue , The problem is as explained below.
Any help on this is appreciated.
Scenario:
There are 3 Blocks in the form : A (Master Block)
: B (Detail of A )
: C (Detail of B )
There is master detail relation created between A and B and B and C. So initially when we query for a record in Master A, it shows all records properly in B and C.
Now if i navigate to the first record of B , and then second record of B , records corresponding to that record shows up properly in C block.
Till now everything works fine.
Issue 1:
But in case after querying initially on Master Block A,If I go directly to the second record of B block, it clears the whole B block and C block.
Issue 2:
Same thing happens if I am on C block ( corresponding to second record of B block) and then navigate to first record in B block , it again clears the whole B block and C block.
Please Help !!
Thanks !

Thanks Xem for Your reply , I tried those settings but it did not help..here is the original link that to the thread that talks about the same problem ,
Issue with Multi Level Master Detail block
The last update to this was the following :
"I figured out that this is happening because Block Status is set to 'Changed' and this is causing it to clear out the blocks.
But cant figure out why the status is setting to 'Changed' "
Any Help from the form Gurus on this form in this matter is truely appreicated !!
Thanks,
Zid.

Pick and Pack / Goods Issue with Multi Batch Pickup

Dear Friends,
Can anyone explain me the process of Pick and Pack / Goods Issue with Multi Batch Pickup.
Harsh

Hi Mathur,
Please refer these links on working with batch splits in deliveries :
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/38/c1853488601e33e10000009b38f83b/frameset.htm">Batch split</a>
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/38/c1853488601e33e10000009b38f83b/frameset.htm">Executing Multi batch</a>
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/38/c1853488601e33e10000009b38f83b/frameset.htm">Transferring Batch Data from Deliveries into Warehouse Management</a>
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

Deployment issue with Planning & EPMA 11.1.2.0

Hi
I installed the following applications of Hyperion suite:
Essbase
EPMA
CalcManager
Planning
During configuring i configured each product separately since i wanted to configure separate DB for each of them.
The configuration went with no issues. But now when i log-in into workspace and go to Navigate, i only see administer.
There is no option for EPMA and Planning applications.
Did i miss any step?
I have used IIS as my webserver because Oracle HTTP gave me some error while deploying (unable to initiate OPMN). Is it some issue with IIS
I ahve installed my applications on Win XP SP3, IIS 5.1 and its a 32bit machine

Did you reconfigure the web server after you finished configuring all of the products?

Deployment issue with EPMA & Planning in 11.1.2

Hi
I installed the following applications of Hyperion suite:
Essbase
EPMA
CalcManager
Planning
During configuring i configured each product separately since i wanted to configure separate DB for each of them.
The configuration went with no issues. But now when i log-in into workspace and go to Navigate, i only see administer.
There is no option for EPMA and Planning applications.
Did i miss any step?
I have used IIS as my webserver because Oracle HTTP gave me some error while deploying (unable to initiate OPMN). Is it some issue with IIS
I have installed my applications on Win XP SP3, IIS 5.1 and its a 32bit machine

Hi
Please redeploy only the Web Server under shared service. It has to be redeployed once EPMA and others are configured.
Thanks
Rupak
Mantra to Win | WinMantras.com | http://hyperion.winmantras.com

Jdeveloper Deployment issue with OC4J

I am using JDEVELOPER with Standalone Version of OC4J. I am trying to deploy the application EAR file generated using JDEVELOPER deploymnent wizard in to Standalone instance of OC4J. I am having issue with the Application server connecton wizard.
I do not know the 'admin' password of the OC4J standalone instance. I am able to start the instance with 'java -jar oc4j.jar'. I am able to access the instacne with
http://localhost:8888.
I am having issue with the Application server connecton wizard. It requires 'admin'
password to create a connection with the app server. The deployment could not succeed without the password.
I would appreciate feedback and suggestons.
Thanks.
Palani

This will reset the password to welcome for you (I've had this problem too - it happens if OC4J doesn't shutdown properly)
java -jar oc4j.jar -install
Enter an admin password to use: welcome
Confirm admin password: welcome
Installation done

Issue with multi-monitor after upgrading to Mavericks

I ran Mountain Lion OS on my MacBook Pro along with VMWare Fusion 5 with an extra monitor and everything was working fine till I upgraded to Mavericks. Since then, I am not able to see the 2nd monitor in the Extended Mode.
on Apple, everything is work and I see two monitors and can move one window from one display to another but when I open my Windows in Fusion, only one display is accessible (the 2nd display showing Apple screen, which wasn't the case before). Even I can see that the color settings I had done before for my additional monitor is not in place after upgrade.
I have checked my WIndows and settings are fine as it was before. It's Windows 7 Pro. I read some articles that I have to upgrade to Fusion 6 and some others that mentioned this is an issue with Mavericks and upgrade won't fix it. So, I am looking for some advice or similar experince, if any.
Thx in advance for your help.
Behzad

Update: I can see that Windows act as it is two displays but the 2nd display is in nowhere and I cannot see it. I mean the window can go out of my normal display (i.e. my laptop) but not to the other monitor. That's why I have to disconnect the 2nd monitor and only use laptop display.

Render issues with multi-task

I have this issue with render.
for example, i load up my projects and render it, if i run into editing problems cus i forget how to do things ill load up firefox find my solution then go back into FCP and it says i need to render the whole project again.
anyone else run into this or know a fix?
please and thanks

1280x720 Motion JPEG A (.mov) @60fps
im using the DVCPRO HD - 720p60 preset in FCP
ive used this same setup before without issues
hope that helps.
also im using both stills and video

Deployment Issues with Custom TS variables set for client

Good Day folks!
I have come across an interesting issue that I have not been able to find a quick fix as such I am looking for some ideas where to trouble shoot my issue moving forwards.
So the Issue:
I have a TS that deploys a Windows 8.1 SOE image, this is done first by using a PXE boot PE image for an “unknown” systems to load a Custom HTA. This HTA allows me manually add the system to SCCM and add it to a required deployments collection that has the
8.1 SOE deployed to it.
The HTA also sets a few custom variables for the system resource things like system location, Machine Domain etc.
Once the HTA has run the system then has a delay to allow for the resource to show up tin the 8.1 deployment collection and then closes.
Now all this appears to work fine, the system is added to the collection, reboots and the deployment runs from start to finish without error.
I can also check the system resource and the variables are present.
The problem I have found is that the custom variables for this resource are not being used by the TS after reboot.. upon further investigation I found that these variables are not even being retrieved ( ran a VB script to save all the variables from the
TS to a txt file to check this ) Because of this the TS is bypassing some needed TS Tasks.
A few interesting things to note:
System appears to be added again when AD discovery is run…. So it causes a Duplicate.
Client Dose connect to SCCM server after deployment but is not receiving deployments ( is getting some policy )
Worked with SCCM 2012 but not 2012 R2
So it appears that when the system reboots from the HTA PE step it has identified itself as an unknown system again…. Even though it has been manually added…
I am interested to know if first of all if others would agree with this and second how SCCM while running a TS matches itself up to a system to retrieve the custom set variables before client install etc... Or a good place to start looking
to dig up more information! Or anything else!
Thanks
Stuart.

Have you taken a look at this hotfix?
http://support.microsoft.com/kb/2907591
We had to apply it in order for our variables to be seen.
joeblow

Deployment Issue with Rules file

Hi,
We have Rules file issue after the deployment in Development and Re7 environment.
We have modified/created the rules file and after the deployment if we execute the rules file from the treatment then we got the error message like mentioned below.
MAXL> Import database PGC_CHE.Pgc_che data from data_file
"/pgcre701/pgc/subsidiary/che/tfi/pgc_nature_for_data_che.txt" using server rules_file "DO_MX_05" on error
write to "/pgcre701/pgc/trc/PGC_150310_103739_pgc_nature_for_data_che.err";
ERROR - 1019006 - Unable to Read
[/logiciel/epm11/user_projects/epm_inst4/EssbaseServer/app/PGC_CHE/Pgc_che/DO_MX_05.rul], Created Using A
Previous Version.
ERROR - 1241101 - Unexpected Essbase error 1019006.
If the same rules file opened through EAS console from SVN trunk or local and save as this rule file into Essbase server(through EAS console) then the rules file working correctly from the treatment process launch like mentioned below.
MAXL> Import database PGC_CHE.Pgc_che data from data_file "/pgcre701/pgc/subsidiary/che/tfi/pgc_nature_for_data_che.txt" using server rules_file "DO_MX_05" on error write to "/pgcre701/pgc/trc/PGC_150310_134622_pgc_nature_for_data_che.err";
OK/INFO - 1019061 - Reading Rule SQL Information For Database [Pgc_che].
OK/INFO - 1019025 - Reading Rules From Rule Object For Database [Pgc_che].
OK/INFO - 1003040 - Parallel dataload enabled: [1] block prepare threads, [1] block write threads..
OK/INFO - 1003037 - Data Load Updated [18800] cells.
OK/INFO - 1003053 - Data Load Elapsed Time with [DO_MX_05.rul] : [1.16] seconds.
OK/INFO - 1241113 - Database import completed ['PGC_CHE'.'Pgc_che'].
Could you please help us on this point ?
Thanks in advance for your help.
Essbase server 11.1.2.3.501 server LINUX red hat

Hi John,
it's not quite that
I will provide more detail:
In fact, we are 3 server Essbase : development, acceptance and operational there are a lot the new version of Essbase 11.1.2.3.501.
The maxl treatment are launch since a other server : a treatment server that are a client maxl and ESSCMD in the same version.
Before that, I'm migrate all the application and database from all alder server Essbase to this new architecture Essbase.
All application and DATABASE (in BSO) was migrated by expot-import process, the all object (csc, rul, rep ...) was transfer by copy in each directories of database.
The test after migration are very satisfying.
Now, we are on process of life on the Essbase server 11.1.2.3.501.
The back office of India used the usually process to developed the lot.
They take the source on SVN application (take the rule), deployed the rule on the development server, modify the rule and have this error.
This error not appear after migration with the same rule ...
I am skeptical
Tx to your help on this subject.

Deployment Issue with MDM Java API exposed as Webservice using EJBS

Hi Experts,
I am implementing MDM Java APIS in Stateless session bean.Exposed that bean as Webservice and using that webservice in
Webdynpro through Adaptive Webservice Model.
I am facing following issue:
Webservice works fine after deployment,after some number of execution webservice stops working and gives exception.After
Redeployment of the Webservice, it starts working again works fine some number of execution.
I am Using new MDMJava API.
MDM Server Details: MDM 5.5 SP06
I am using following code for connetion
//////////////*************Getting Connection************///////
          ConnectionPool pool = null;
          String sessionId = null;
          try {
               pool = ConnectionPoolFactory.getInstance("Server Ip");
          } catch (ConnectionException e1) {
               System.out.println(e1.getMessage());
//////////////*************Repository Session************///////
CreateRepositorySessionCommand repSeession =
               new CreateRepositorySessionCommand(p_pool);
          repSeession.setRepositoryIdentifier(p_repId);
          try {
               repSeession.execute();
          } catch (CommandException e2) {
               System.out.println(e2.getMessage().toString());
          String repIID = repSeession.getRepositorySession();
          //     Authenticate Repository
          AuthenticateRepositorySessionCommand autRepSeesion =
               new AuthenticateRepositorySessionCommand(p_pool);
          try {
               autRepSeesion.setSession(repSeession.getRepositorySession());
               autRepSeesion.setUserName(p_user);
               autRepSeesion.setUserPassword(p_Password);
               autRepSeesion.execute();
          } catch (CommandException e3) {
               System.out.println(
                    "RepSession Seesion" + e3.getMessage().toString());
          return autRepSeesion.getSession();
//////////////*************user Session************///////
GetRepositoryRegionListCommand regionListCommand =
               new GetRepositoryRegionListCommand(p_pool);
          regionListCommand.setRepositoryIdentifier(p_repId);
          try {
               regionListCommand.execute();
          } catch (CommandException e) {
               System.out.println(e.getMessage().toString());
          RegionProperties[] regions = regionListCommand.getRegions();
          //                                 create a user session
          CreateUserSessionCommand UsersessionCommand =
               new CreateUserSessionCommand(p_pool);
          UsersessionCommand.setRepositoryIdentifier(p_repId);
          UsersessionCommand.setDataRegion(regions[0]);
          // use the first region
          try {
               UsersessionCommand.execute();
          } catch (CommandException e) {
               System.out.println("UserSession" + e.getMessage().toString());
          String UsersessionId2 = UsersessionCommand.getUserSession();
AuthenticateUserSessionCommand authUserCommand =
               new AuthenticateUserSessionCommand(p_pool);
          authUserCommand.setSession(UsersessionCommand.getUserSession());
          authUserCommand.setUserName(p_userId);
          authUserCommand.setUserPassword(p_password);
          try {
               authUserCommand.execute();
          } catch (CommandException e) {
               System.out.println("User Seesion" + e.getMessage().toString());
          return authUserCommand.getSession();
//////////////*************Destroy Session************///////
     DestroySessionCommand destroySessionCommand =
               new DestroySessionCommand(p_pool);
          destroySessionCommand.setSession(p_repsession);
          try {
               destroySessionCommand.execute();
          } catch (CommandException e) {
               e.printStackTrace();
          destroySessionCommand.setSession(p_Uesrsession);
               try {
                    destroySessionCommand.execute();
               } catch (CommandException e) {
                    e.printStackTrace();
Do we need to relase the connection pool object also?
Can anyone help me with the code how that can be achived?
Please Reply if anyone has come accross similar issue or know what can be the solution.
Thanks in Advance.
Regards Shruti
Edited by: Shruti Shah on Dec 18, 2008 12:52 PM

Hi Nitin,
Thanks for the prompt Response.
Even I am guessing that its becose of Connection pool.
I am destroying session as follows
               DestroySessionCommand destroySessionCommand =
               new DestroySessionCommand(p_pool);
          destroySessionCommand.setSession(p_repsession);
          try {
               destroySessionCommand.execute();
          } catch (CommandException e) {
               e.printStackTrace();
          destroySessionCommand.setSession(p_Uesrsession);
               try {
                    destroySessionCommand.execute();
               } catch (CommandException e) {
                    e.printStackTrace();
But I didnot find any method by which i can close realsse connection from connection pool.
It would be great if you can help me how close or realese those connection.In MDM Console i am able to see those sessions even after destroying them.
Regards Shruti.

Cisco security manager deployment issue with invalid command

Running CSM 3.3.1, to manage an 800 series pre-configured router.
The router has a number of policy ACL's and class-maps configured. When the config is imported to CSM a number of warnings are seen reporting that some of the interfaces are unprotected by ACL's, which is correct, no serious errors are reported and the device is succesfully imported.
But, when I look at the configuration within CSM non of the ACL's or the class maps are shown.
Also, when I configure some feature on the router, during the deployment phase I get an error indicating that there is an invalid protocol under one of the class maps associated with an interface. The protocol in question is bittorrent. This error prevents depolyment of my changes. In fact this causes my client to hang, eventually if I close the application windoes reports that the issue is caused by javaw.exe faiing to respond.
If I take out the bittorrent protocol under the class map then all seems well.
So, I though flexconfigs would resolve this, enabling me to import the config with the unsupported command. I created a flexconfig with the class map and the invalid protocol. When I re-imported the device there is still a lot of configuration features that are on the router but are missing in CSM.
I'm not sure how to resolve this, the router was not configured through CSM in the first place.

Update to this, the CSM is also altering firewall configurations, if I import a configuration from an ASA running 8.0.4 code, then compare that configuration to that running on the same ASA there are quite a few differencies. Some of these are not items that CSM reports as requiring Flexconfig support, which concerns me.
This is not the first time I've seen this occur, customer is concerned about the reliability of the way this system handles configurations, and I cannot explain why it exhibits this process.
Anyone else seen this, and found a work around?

Deployment issue with SOA - OSB 11g environment

Hi,
We have Dev Environment configured with SOA 11g (11.1.1.4) and OSB 11g (11.1.1.4) on a single weblogic domain. Developed SOA composite app and deployed to the SOA Server. We are exposing our SOA Composite thru OSB ( created osb proxy and business services and accessed soa composite from the client. It s working fine ) layer for the client to access it. The issue here is while deploying it to the production environment (configured OSB and SOA in two separate WL domain) located offshore.
What i saw from the soa doc is that we need to deploy SOA composite to the SOA Server and OSB Configuration to the OSB Server.
but the offshore person is asking us to deploy both SOA composite & osb to the same OSB Server as an .ear file.
Is it possible to deploy both SOA composite & osb to the same osb server ? is there any document on project that involve both soa and osb.
please guide me how to do the deployment
I appreciate all your help.
thanks
sumesh.j

I am wondering if could able to solve the problem of deploying both SOA composite & osb to the same osb server. Even I am facing the same problem....
If you could able to solve the problem then please let us know the steps that you have followed to solve the same.

Deployment Issue With NetBeans4.1Beta

Ok Here is the issue...
I'm running SAS8 & NB4.1B on a windows server 2003 machine, j2se version is J2sdk1.4.2_07
I have been trying to build and deploy a simple hello world application with a single JSP file. I can do this no problems with the bundled Tomcat However SAS8PE throws the following error:
Here is step by step what I do...
File > NewProject > Web > Web Application
give it a unique project name, leave source structure as java BluePrints, leave server as SAS8PE, leave J2EE version as 1.4, leave context path as "/$projectname", leave set as main project checked...
click finish...
Build the project by Build>Build Main Project
This completes successfully (Just built an empty project with no coding...should return the empty standard jsp file when run)
And then I run the project by Run > Run Main Project and I get the deployment error on deployment processor monitor message box with the following info:
Deployment error: null. See the messages.log file for details.
Here is the contents of my output window after the error:
init:
deps-module-jar:
deps-ear-jar:
deps-jar:
library-inclusion-in-archive:
library-inclusion-in-manifest:
compile:
compile-jsps:
do-dist:
dist:
run-deploy:
Deployment error: null. See the messages.log file for details.
C:\java\nbprojectfolder\nb41Beta\deneme\nbproject\build-impl.xml:355: Deployment error: null. See the messages.log file for details.
BUILD FAILED (total time: 2 seconds
When I click the hyperlink to the build-impl.xml file I get the red line at precisely the following message:
<target name="run-deploy" depends="init,compile,compile-jsps,-do-compile-single-jsp,dist">
<nbdeploy forceRedeploy="${forceRedeploy}" clientUrlPart="${client.urlPart}" debugmode="false"/>
</target>
By the way this is at the execution section of the build-impl.xml file
I have tried re-installing everything and I still get the same error... Shouldn't this be a straightforward with no hassles task? Anyone else had the same problem as I did? What do you suggest I do at this point?
Thanks...

Another issue is when I try to deploy the simple war file under /dist thru the admin console (web applications > deploy) I get the following error...
A "com.sun.enterprise.tools.guiframework.exception.FrameworkException" was caught. The message from the exception: "java.lang.reflect.InvocationTargetException while attempting to process a 'error' event for 'deployWebModule'."
The root cause is "javax.management.AttributeNotFoundException: id"
See the HTML source for more detailed (stack trace) information.
The stack trace is as follows

Deployment issue with ADF 11g app.

Hi,
I am not able to deploy the ADF 11.1.1.2.0 application on weblogic 10.3.2 (Solaris OS). Initially I got the following exception.
Caused By: java.lang.ClassNotFoundException: oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener
I have fixed this by removing the listener from weblogic-application.xml. Now I am getting the below exception.
Caused By: java.lang.ClassNotFoundException: oracle.mds.lcm.weblogic.WLLifecycleListener.
Can somebody help me how to resolve this issue.
Thanks.

Hi,
I have fixed the above mentioned issue. Its due to the class path in weblogic server.Deployment is successful and it is showing in Active but when I am trying to launch the page.
I am getting this error message.
1266623607244> <BEA-101020> <[ServletContext@13835926[app:ESPSApp module:ESPSApp path:/ESPSApp spec-version:2.5 version:V2.0]] Servlet failed with Exception
java.security.AccessControlException: access denied (oracle.security.jps.service.policystore.PolicyStoreAccessPermission context=APPLICATION,name=ESPSApp#V2.0 getApplicationPolicy)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
Can somebody tell me what I suppose to do.
Thanks.

Deployment issue with multi-SSO

Similar Messages

Maybe you are looking for