Deployment of a crystal report application with visual 2005

Hello all,
I am very new at .NET, and this is my first post to this forum.
I've created a report (example.rpt) with Crystal Reports 2008. Then I've installed "Crystal Report for visual .net 2005 component".
Then I've imported it in a vb.net project using its Crystal Report Application Template, complied it and succesfully tested it on my machine.
My next objective is to manage the deployment of my report on the end-user machine. Here started my problem.....
Following suggestions I found on the net, I tried to create a Setup Project to deploy my application including Crystal Report runtime components; the report is included in the project as an embedded resource. Apparently the setup project as been correctly builded; if I run it my machine everything is ok but on end-user machine it generated this error:
EventType clr20r3, P1 reportarts.exe, P2 1.0.0.0, P3 49feecfc, P4 reportarts, P5 1.0.0.0, P6 49feecfc, P7 e, P8 c6, P9 system.invalidoperationexception, P10 NIL.
I tried on different windows SP2 - SP3 machines, with .NET Framework 2.0 alredy installed but the error is the same.
Can you Help me please???????? THANK YOU in ADVANCE

Hi,
I have notice that
I've created a report (example.rpt) with Crystal Reports 2008. Then I've installed "Crystal Report for visual .net 2005 component".
Is that meam you have developed the reports in CR 2008(Seperate product) and installed CR for VS2005 (CR 10.5) and using CR 2008 reports in CR 10.5 environment?
Would like to inform that CR 2008 and CR 10.5 which comes with VS2005 are completely different and if in case you are converting the CR 2008 reports to CR 10.5 then you need to be careful for deployment because the correct runtimes should be installed on the deployment system.
You can check the integrated CR with VS by opening VS environment and go to help - about - and check the CR version.
If you are using the VS 2005 CR 10.5 then click [here|http://resources.businessobjects.com/support/communityCS/FilesAndUpdates/cr_net_2005_mergemodules_mlb_x86.zip] to install latest merge modules.
Hope this helps!!
Edited by: Amit Singh on May 5, 2009 6:07 PM

Similar Messages

How to use Crystal Reports 11 with Visual C++ 2005 ?

Post Author: compvis
CA Forum: General
Hello everyone !
Plz tell me how to use Crystal Reports XI with Visual C++ 2005 ?
Thank you so much !

Moved to .NET SDK forum.
Need more info, version of the assemblies you are using and the assembly file system version number ( not the same as what you see in the properties of the project.
As well, what happens if you use OLE DB as a test?
Thank you
Don

Crystal Reports Bundeled With Visual Studio 2008

We are currently using the version of Crystal Reports that comes with Visual Studio 2008. Many reports have 5-10 sub reports.
We are running a ASP.NET application and this application passes to the reports a XSD File as the data source. It can take up to 5 minutes sometimes for a report to process.
A couple of questions.
1. Is there a concurrent user limit (I have read 3 or 5)
2. Do the reports get queued up if more than 3 users are running a report?
3. If we have sub reports does each report count as a "user" for example if we have one user on the machine and they run the report that has 10 sub reports, would that be hitting a user limit?
3. Would upgrading to the 2008 version help us at all?
Any other recommendations?
Thank in advance!

1. Is there a concurrent user limit (I have read 3 or 5)
concurrent user limit is 3
2. Do the reports get queued up if more than 3 users are running a report?
+ Yes. If you go to the Event viewer, you should be bale to see messages along the lines of; license not found, waiting x seconds+
3. If we have sub reports does each report count as a "user" for example if we have one user on the machine and they run the report that has 10 sub reports, would that be hitting a user limit?
+ There are two distinct counts. Users, and print jobs. The print engine, can process 3 concurrent users. A print job, consists not only of the report, but also it's subreports. A page through is a print job. A search through the report is a print job. Print job limit is set in the registry and by default it is set to 70. The upshot of this is; if you have one report and one subreport in the detail section and the detail section has 100 records, you will run 1001 print jobs.
4. Would upgrading to the 2008 version help us at all?
Probably not. The same structure exists in CR 2008. Now, you say that you pass an XSD file to the report. Are you actually passing and XSD or a Dataset?_
Finally, remember that if you have 10 subreport in a report, you are running 11 print jobs right there. If one or more of those subreports are in the detail section, the number of print jobs increases accordingly.
For more information see the article [Crystal Reports Maximum Report Processing Jobs Limit v2.doc|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f053713e-3e3d-2c10-2a81-f79259e54023]
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Edited by: Ludek Uher on Dec 16, 2009 10:06 AM

Using Crystal Reports XI with Visual studio 2008 C#

Hi,
I am trying to add some reports which have been created to a C# web application using the Crystal Reports web viewer in Visual Studio 2008. The reports use SQL authentication instead of integrated authentication.
Everytime the page with the report viewer is loaded, im prompted for my logon details. I dont want the end users to be doing this. How do i integrate the logon details into my application so that it doesnt keep prompting using C#?? Also i have parameters which produce a drop down box of available values...this does not work within the web application but does in Crystal Reports.
Any help would be good with examples in C# please. Ideally i would like to hold the connection info in the web.config however i dont know if this is possible.
Thanks
Vish

Hi Vishal,
Here's a link to the platforms for SP5:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/907e6412-a7ac-2b10-23a8-f837fcc78a37
If the link doesn't work then go to this one: Articles
And select the the CR version and look for the specific patch level. If you don't have patches installed I would suggest downloading and installing to get up to SP5.
It does not indicate .NET 2008 so it's not been tested, it may work but if you run into any issues we don't have an escalation path to get it fixed.
Thank you
Don

Crystal viewer is empty (Crystal Report Server with Visual Studio)

Hello everyone,
I've some issues to display a basic report from a Crystal Server 2013 and Visual Studio 2010
Below, the code:
WebForm1.aspx.cs
CrystalReport's DLL are in revision 14.0.3500
using CrystalDecisions.Enterprise;
using CrystalDecisions.Enterprise.Viewing;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.ClientDoc;
SessionMgr sessionMgr = new SessionMgr();
string username = "Administrator";
string password = "password";
string server = "server-name";
string auth_type = "secEnterprise";
EnterpriseSession enterpriseSession = sessionMgr.Logon(
 username, password, server, auth_type);
EnterpriseService enterpriseService = enterpriseSession.GetService("InfoStore");
InfoStore infoStore = new InfoStore(enterpriseService);
enterpriseService = enterpriseSession.GetService("RASReportFactory");
Object psrfObject = enterpriseService.Interface;
ReportAppFactory psReportFactory = (ReportAppFactory)psrfObject;
string queryString = "Select * From CI_INFOOBJECTS "
 + "Where SI_PROGID='CrystalEnterprise.Report' "
 + "And SI_NAME Like 'TestRapportTexte'";
InfoObjects infoObjects = infoStore.Query(queryString);
InfoObject infoObject = infoObjects[1];
ReportClientDocument client = new ReportClientDocumentClass();
client = psReportFactory.OpenDocument(infoObject.ID, 0);
CrystalReportViewer1.ReportSource = client;
WebForm1.aspx
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server" AutoDataBind="True"
 Height="550px" Width="1300px" BestFitPage="False"/>
The project has 7 references from Crystal:
CrystalDecisions.CrystalReports.Engine
CrystalDecisions.Entreprise.Framework
CrystalDecisions.Entreprise.InfoStore
CrystalDecisions.Entreprise.Viewing.ReportSource
CrystalDecisions.ReportAppServer.ClientDoc
CrystalDecisions.ReportAppServer.Controllers
CrystalDecisions.Web
Actually, I have no error and no exception but the 'CrystalReportViewer' is always empty.
In the C# file, ReportClientDocument client seems OK with the ID and the name of the report.
Thanks for your feedback

Hi Marie
As you are using RAS I'd like you to have a look at a sample application called "NET-CS2003 RAS-Managed BE115 Add Tool-Tip" available for download from here:
Look at the code as used in the viewer.espx.cs page and pattern your code on that.
For a summary listing of more sample apps, please see:
Sample Applications for Business Intelligence Software Developer Kits
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
https://twitter.com/SAPCRNetSup

Crystal Reports 10 with Visual Studio 2010

We have Crystal Reports 10, which I have installed. The viewer provided with the install runs fine. We have an application that has an embedded viewer.
Then I'm just trying to get the simple C# sample code to run in VS2010, which is just a form with the viewer component reading an existing .rpt file. But I get a "Load report failed" error with no other details. Seems like it really should be simple. Any idea what I might be doing wrong?
I'm running Win7 64, but compiling in x86 mode.

Well, you have two options;
1) Go with the version of CR that bundles with .NET2005 (CR 10.2)
2) Go with CRVS2010 and VS2010
CR10.0 is not supported in either .NET2005 or .NET2010. See [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/WhichCrystalReportsassemblyversionsaresupportedinwhichversionsofVisualStudio+.NET] wiki for more info.
There are no work-arounds, no nothing that I can help with or recommend.
- Ludek

Deploying crystal reports basic for visual studio 2008 for VB6

My application has a module in .net and other in vb6.
I have a problem on deploying crystal reports in client machines, for module in vb6.
The vb6 application uses crystal viewer control obtained from crystal reports basic for visual studio 2008.
What type of deployment should I use?
Currently, I have a setup with prerequisite "crystal reports basic for visual studio 2008".
But I think it misses the dlls crviewer.dll and craxddrt.dll, so I put them in setup and with the register COM options, and it works, but it's not working very well.
When I open a form that uses crystal viewer, the setup (I have created) is lunched and says that have to restart machine. Then it opens the report, but the next time I use the application it does the same thing.

Ok, thank's for the posts, they help so much.
So I'm going to discard vb6 and move to .NET, but... there is a problem:
Many reports have parameters that are asked before showing the report.
The Crystal Viewer that is used in VB6 version isn't the same used in .NET.
The viewer of VB6 asks the parameters in the way we want, however the .NET crystal viewer ask's the parameters in way that we don't like, because we have to do next -> next -> next...
The links above show the diferences:
VB6 -> http://picasaweb.google.com.br/paulo.gonc/CrystalReports#5249249283702618322
.NET -> http://picasaweb.google.com.br/paulo.gonc/CrystalReports#5249246459437178242
There is a way to configure Crystal Viewer, so that parameters asking form will work like the vb6 away?

Error when running the Crystal Report 9.1 (visual studio 2003) in the deployed server

Hello,
1) I am suddenly getting an error message ‘Load Report failed’ in a production server (where the VS2003 application is deployed) when the Crystal Report is executed. This has happened maybe because of the Windows/Crystal Report Updates!
I am able to see the same report perfectly fine in the development computer using VS 2003.
I am using the 9.1 version which is part of the Visual Studio 2003.
The event logs show 'Either the keycode library is not registered or it cannot be loaded ...EventID=10029'. See attached screen shot.
Please help?
2) Since I was getting a registration suggestion window for using Crystal Reports, I registered twice using different email address and it said that it will send me the KeyCode for the Crystal report but after successful registration I never got any keycode but just an email acknowledging the Registration.
I believe the KeyCode is required to use it in the server to execute/run a report.
Can SAP representative email the keycode to my gmail account?
My product key is:
Please help to resolve both my problems
Thanks in advance,
Sanjay Chudasama

If I memory servers, you have to open the Crystal_Regwiz2003.msm in the .NET deployment project. One of the properties of the msm was Keycode (or similar). You entered the keycode here. To find your keycode; in VS2003 IDE, go to the Help | About screen. You will see one of the installed components as Crystal Reports and the keycode will be on the right of that. Copy the keycode from here, paste in the above.
For more details see the article Crystal Reports and Visual Studio .NET - Application Deployment.
- Ludek
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Share Your Knowledge in SCN Topic Spaces

Problem when deploying Crystal Report application on weblogic 10.3

I created a Crystal Report application, using Eclipse ,
but when i tried to run the correspondant EAR on Weblogic 10.3
i encountered this exception , i guess it is a missing JAR but i didn't know which one :
Error 500--Internal Server Error
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Could not initialize class org.apache.commons.configuration.ConfigurationUtils---- Error code:-2147467259 Error code name:failed
 at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:54)
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.(SourceFile:703)
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:662)
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:632)
 at com.crystaldecisions.sdk.occa.report.application.ClientDocument.if(SourceFile:504)
 at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(SourceFile:669)
 at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(SourceFile:77)
 at com.businessobjects.report.web.b.a.ac(SourceFile:681)
 at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(SourceFile:182)
 at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(SourceFile:100)
 at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(SourceFile:76)
 at jsp_servlet.__crystalreport1_45_viewer._jsp__tag0(__crystalreport1_45_viewer.java:129)
 at jsp_servlet.__crystalreport1_45_viewer._jspService(__crystalreport1_45_viewer.java:75)
 at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
 at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(Unknown Source)
 at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
 at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
 at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NoClassDefFoundError: Could not initialize class org.apache.commons.configuration.ConfigurationUtils
 at org.apache.commons.configuration.AbstractFileConfiguration.setURL(AbstractFileConfiguration.java:642)
 at org.apache.commons.configuration.AbstractHierarchicalFileConfiguration.setURL(AbstractHierarchicalFileConfiguration.java:222)
 at org.apache.commons.configuration.XMLConfiguration.(XMLConfiguration.java:171)
 at com.crystaldecisions.reports.common.engine.config.apache.CrystalConfigurationImpl.pushXmlConfiguration(Unknown Source)
 at com.crystaldecisions.reports.common.engine.config.MultiThreadedConfig.pushXmlConfiguration(Unknown Source)
 at com.crystaldecisions.reports.common.engine.Engine.configure(Unknown Source)
 at com.crystaldecisions.reports.common.engine.Engine.getConfigurationManager(Unknown Source)
 at com.businessobjects.reports.sdk.a.a(SourceFile:68)
 at com.businessobjects.reports.sdk.a.do(SourceFile:106)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.n(SourceFile:2687)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.i(SourceFile:2807)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.connect(SourceFile:296)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.(SourceFile:216)
 at com.businessobjects.sdk.erom.jrc.a.(SourceFile:43)
 at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:46)
 ... 27 more
***************************************************************

Hi ,
I succesfully added the jar to the classpath but i got the same error ( the first one),
i wonder if it is a problem due to the connection with the remote database because of those 3 lines :
Caused by: java.lang.NoClassDefFoundError: Could not initialize class org.apache.commons.configuration.ConfigurationUtils
 at org.apache.commons.configuration.AbstractFileConfiguration.setURL(AbstractFileConfiguration.java:642)
 at org.apache.commons.configuration.AbstractHierarchicalFileConfiguration.setURL(AbstractHierarchicalFileConfiguration.java:222)
 at org.apache.commons.configuration.XMLConfiguration.(XMLConfiguration.java:171)
here is the full log :
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
[weblogic.servlet.internal.WebAppServletContext@1aee513 - appName: 'FinalEAREssai', name: 'EssaiEarCR', context-path: '/EssaiEarCR', spec-version: '2.5', request: weblogic.servlet.internal.ServletRequestImpl@1302951[ GET /EssaiEarCR/CrystalReport1-viewer.jsp HTTP/1.1 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: fr Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cookie: ADMINCONSOLESESSION=MG10Kq5JT9LkDTXqKJMGRJQBJbKZ1ryfT4g5TJGGpltbST3Gjphq!40961007; JSESSIONID=Q2x0Kq6Lv5QT082psRwrmRpfNfnqPDRdF8tsMg9Czb5vQTPh9ZKH!40961007 ]] Root cause of ServletException. com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Could not initialize class org.apache.commons.configuration.ConfigurationUtils---- Error code:-2147467259 Error code name:failed at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:54) at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.<init>(SourceFile:703) at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:662) at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:632) at com.crystaldecisions.sdk.occa.report.application.ClientDocument.if(SourceFile:504) at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(SourceFile:669) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(SourceFile:77) at com.businessobjects.report.web.b.a.ac(SourceFile:681) at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(SourceFile:182) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(SourceFile:100) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(SourceFile:76) at jsp_servlet.__crystalreport1_45_viewer._jsp__tag0(__crystalreport1_45_viewer.java:129) at jsp_servlet.__crystalreport1_45_viewer._jspService(__crystalreport1_45_viewer.java:75) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(Unknown Source) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) java.lang.NoClassDefFoundError: Could not initialize class org.apache.commons.configuration.ConfigurationUtils at org.apache.commons.configuration.AbstractFileConfiguration.setURL(AbstractFileConfiguration.java:642) at org.apache.commons.configuration.AbstractHierarchicalFileConfiguration.setURL(AbstractHierarchicalFileConfiguration.java:222) at org.apache.commons.configuration.XMLConfiguration.<init>(XMLConfiguration.java:171) at com.crystaldecisions.reports.common.engine.config.apache.CrystalConfigurationImpl.pushXmlConfiguration(Unknown Source) at com.crystaldecisions.reports.common.engine.config.MultiThreadedConfig.pushXmlConfiguration(Unknown Source) at com.crystaldecisions.reports.common.engine.Engine.configure(Unknown Source) at com.crystaldecisions.reports.common.engine.Engine.getConfigurationManager(Unknown Source) at com.businessobjects.reports.sdk.a.a(SourceFile:68) at com.businessobjects.reports.sdk.a.do(SourceFile:106) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.n(SourceFile:2687) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.i(SourceFile:2807) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.connect(SourceFile:296) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.<init>(SourceFile:216) at com.businessobjects.sdk.erom.jrc.a.<init>(SourceFile:43) at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:46) at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.<init>(SourceFile:703) at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:662) at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:632) at com.crystaldecisions.sdk.occa.report.application.ClientDocument.if(SourceFile:504) at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(SourceFile:669) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(SourceFile:77) at com.businessobjects.report.web.b.a.ac(SourceFile:681) at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(SourceFile:182) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(SourceFile:100) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(SourceFile:76) at jsp_servlet.__crystalreport1_45_viewer._jsp__tag0(__crystalreport1_45_viewer.java:129) at jsp_servlet.__crystalreport1_45_viewer._jspService(__crystalreport1_45_viewer.java:75) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(Unknown Source) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
thanks Vijay for you help

Deploying Crystal Reports Basic for Visual Studio 2008

I have Windows Forms project using Crystal Reports Basic for Visual Studio 2008
I can't find the merge module to include in the setup project like I used to do in Visual Studio .NET 2003
Everyone seems to say that they don't exist for that version of Crystal Reports
After searching for a long time I found something about a package located at
C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x86.msi
Tried it and it seems to work.
Do I have to install this to the client computer ? Is that the only way having a "Crystal Reports Basic Runtime for Visual Studio 2008" in the program list of the client computer ?

Hi Victor,
We can download all the runtimes from the following link:
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Try to search Business Objects Note regarding this from [here|https://www.sdn.sap.com/irj/sdn/businessobjects-notes]
More info regarding deployment can be found from DevLibrary:
[https://boc.sdn.sap.com/node/8546]
Regards,
Shweta

Crystal reports integration with sql server and visual studio 2010

when I am trying to open a crystal report through code ( visual basic 2010 ) I get the error
the report has no tables
I am using SQL SERVER 2008 R2
HERE IS THE CODE I WROTE
Imports System.Data
Imports System.Data.OleDb
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Windows.Forms
Imports CrystalDecisions.Shared
Public Class frmRep
    Dim objConnection As New OleDbConnection("Provider=SQLOLEDB;Data Source=ASHRAF-PC\SQLEXPRESS;Integrated Security=SSPI;Initial Catalog=TEST")
    Dim objDataAdapter As New OleDbDataAdapter()
    Dim objDataSet As New DataSet()
    Private Sub CrystalReportViewer1_Load(sender As System.Object, e As System.EventArgs) Handles CrystalReportViewer1.Load
    End Sub
    Private Sub frmRep_Load(sender As Object, e As System.EventArgs) Handles Me.Load
        Dim cr As New ReportDocument
        objDataAdapter.SelectCommand = New OleDbCommand()
        objDataAdapter.SelectCommand.Connection = objConnection
        objDataAdapter.SelectCommand.CommandType = CommandType.Text
        objDataAdapter.SelectCommand.CommandText = "select * from bands"
        objConnection.Open()
        objDataAdapter.Fill(objDataSet, "bands")
        objConnection.Close()
        cr.Load("D:\MY VB 2010 PROJECTS\test2\test2\CrystalReport1.rpt")
        cr.SetDataSource(objDataSet.Tables("bands"))
        CrystalReportViewer1.ReportSource = cr
        CrystalReportViewer1.Refresh()
    End Sub
End Class

I suggest you post that question in a Crystal Reports forum.
Markus

Missing DataBase Login information for deployed VS2008 w/Crystal Report

I'm creating a Windows Form application using VS2008 Pro and the basic Crystal Reports (included).
I've successfully added a crystalreportviewer control and a crystal report (.rpt) to my form. I've written the following code in the code behind to programmatically load/bind the report to the viewer. Everything works fine on my development machine (or any machine that has Visual Studio installed). Where I'm encountering problems is when I deploy the application to a machine that does not have VS installed (I have downloaded and installed the "Crystal Reports Basic for Visual Studio 2008 Redistributable Package" for the appropriate processor type on this non development machine) that I'm getting an error . It prompts for "DataBase Login". The ServerName, LoginID and Password are all there, but the "DataBase" field is empty and disable for user input.
Why is the DataBase information missing? How can I solve this problem?
(On a side note, I vaguely remember a property for enabling/disabling the prompting of the database login. I can't remember where this was again to double check if that is the culprit. But I'm pretty sure that I did mark it as to not prompt, since it's supplied in the code behind. Plus it doesn't prompt on the development machines. Only on the non-development machines).
Any help is greatly appreciated! Thanks.
The code executed in the PageLoad event of the form.
this.crystalReportViewer1.RefreshReport();
 ReportDocument reportDocument = new ReportDocument();
 #region Load Parameters
 ParameterFields paramFields = new ParameterFields();
 for (int i = 0; i < _parameterName.Length; i++)
 {
 ParameterField paramField = new ParameterField();
 paramField.ParameterFieldName = _parameterName;
 ParameterDiscreteValue discreteVal = new ParameterDiscreteValue();
 discreteVal.Value = _parameterValues;
 paramField.CurrentValues.Add(discreteVal);
 paramFields.Add(paramField);
 }
 crystalReportViewer1.ParameterFieldInfo = paramFields;
 #endregion
 #region Load Report
 string reportUrl = "";
 string exePath = Application.ExecutablePath.ToString();
 exePath = exePath.Remove(exePath.Length - 18, 18);
 exePath += _reportName + ".rpt";
 reportUrl = exePath;
 reportDocument.Load(reportUrl);
 #endregion
 reportDocument.SetDatabaseLogon("myUserName", "myPassword", "myServer", "myDataBase");
 crystalReportViewer1.ReportSource = reportDocument;

Edited by: mtech8 on Jan 9, 2010 3:03 PM. Corrected formatting issues to make post readable.

HI. Ludek,
Thanks for the tips. I tried both, but the problem presists.
On a side note, I did get my hands on yet another "non-development machine". This one ran with Window's Vista appeared to work (even with my original code).
The "non-development machines" that I've tested on are Windows 7 and Window XP machines. On these machines, when I commented out the reportDocument.SetDatabaseLogon line, when I try to load the report, it still prompts for the Database Logon information, however, it also has the "Database name" empty and disabled.
Since it worked on a non-development machine with Win Vista. I don't think there is a problem with references or the Crystal runtime packages.
As far as permission for the report to contact the database, I'm guessing there isn't a problem there either because the application does successfully connect to the database.
I'm connecting to a SQL2005 database and using the SQL Native connection.
On a side note: as for the enabling prompting, I just remembered that it was an option available when using Crystal Reports with a web project. Thus I couldn't find it here with a Window's Form project.

Crystal Report Application Sharing Issue

We are receiving the following error message when trying to open up Crystal Reports from within our application.
Unable to load Crystal Report user function dll:
e:\Program Files\Centricity Practice Solution 90\Client\mlcrwlib2.dll.
The report may not run correctly.
Here is an explanation of our current environment:
We are utilizing Crystal Reports XI R2 SP6 using the ActiveX Designer control, craxddrt.dll, to open up Crystal Reports within a Visual Basic project. I did not see a VB forum so I'm posting here in .NET.
We are including the 4 Crystal Merge Modules in our InstallShield Project when installing our application so we feel we are installing correctly, but there appears to be a Crystal Reports sharing issue with another application. When we attempt to open up our Crystal Reports from within the application, we get the error message above. If we click OK to the error message our report opens. I would like to eliminate the error message, but I'm not sure why we are even calling the file in the error above.
I'm assuming that the other application has created a user function or something that is registered within Crystal Reports, but we do not have access to or cannot load it. We have not been able to reach anyone from the other software application company to ask questions so I'm hoping that someone can point me in the right direction as to what is going on here.
I have verified that the Business Objects folder was created with the run-time files needed to run Crystal Reports. I also see a previous version of Crystal Reports run-time files on this server since a Crystal Report folder exists. I have utilized Process Monitor to see that the correct craxddrt.dll is being opened, but I cannot figure out how the file in the error message above is being called.
Any help on this issue would be greatly appreciated.

Hello Marlon,
I worked on a Centricity (GE Medical) issue with the Report Designer Component (RDC) a number of months ago. As part of my troubleshooting I discovered that their application uses an atypical deployment of the Crystal runtime files for their Centricity application. The "short" version is that the way they implemented the RDC would not have been supported by SAP Support.
I was never able to resolve the Centricity issue, but proved that their implementation of the RDC was the root cause of the issue. The mlcrwlib2.dll is a Centricity DLL that seems to control how/where the craxdrt.dll / craxddrt.dll file is loaded (location A in one work stream in their application, location B in another work stream in their application).
One of the side effects of this DLL is that it "took over" how the craxdrt.dll would load for any other application that also used the RDC (craxdrt.dll / craxddrt.dll). I proved the issue by sending them a simple sample application that was written in CPP. Using CPP allowed us to eliminate the need to reference any other dependencies besides the Crystal runtime files. This sample application consistently failed with a reference to their mlcrwlib2.dll - which I knew wasn't referenced in my CPP sample. At the time Centricity wasn't able to explain why their mlcrwlib2.dll was being picked up by my sample. I expect that their issue would be resolved once they discovered why mlcrwlib2.dll loaded erroneously, but they were still working on the answer to that question.
Because we couldn't determine how and why the mlcrwlib2.dll was behaving as it did I'd suggest not trying to use a "side by side" installation of another RDC application. I know it's not much of an answer, but it might help explain why all the regular troubleshooting steps aren't working for you.
Sincerely,
Dan Kelleher

Could not start the Crystal Report Application Server service on local computer

Post Author: [email protected]
CA Forum: Deployment
Hi
I have a following problem.
I have installed Crystal report application server(RAS)(CE embeded 10) on Windows server 2003 enterprise x64 edition.
When i start it, i see an error:
Could not start the Crystal Report Application Server service on local computerError 1067: the process terminated unexpectedly
Sometimes, i can start it but it stops a few minutes later.
I have disabled DEP (data execution prevention).
Log:
Faulting application crystalras.exe, version 10.0.0.533, faulting module unknown, version 0.0.0.0, fault address 0x00000000.
Please help
Thanks for your help

This error occurs after an initial install, when the Oracle suite is installed logged in as the user(who has admin rights on the machine). If this is the case,
1.Go to Services (Admin Tools > Services)
2.Double click the Oracle services( BI Server or Presentation or TNS Listener).
3.Go to Log On tab
4.If local system account is checked , un-check that option. Check "This Account" option
5.Give the user information for that machine(e.g domain\username)
6.Specify password associated with the user ( the username/pwd that is used to login to the machine)
7.Confirm pwd and click Apply.
8.re-start the service.
This is what i did , and it worked.
good luck and hopefully oracle addresses these issues , they become frustrating to use the product.
Thanks,
Ram

How to integrate Crystal Report 2008 with java

Currently we are using Crystal Report XI with our application, it is working fine. Now we are updating to Crystal Report 2008.
We have build our application in enterprise archive file. There is a web archive file(.war) file in the EAR file which contains the crystal report. Inside the .war file we have reports folder which contain jsps and rpt folder. the jsps folder contains the crystalreportviewers12 folder and .jsp files. The rpt folder contain the.rpt files. The WEB-INF which is at the reports folder leavel contains the classes and lib folder. The crystal report jars are in the lib folder and the CRConfig.xml file inside the classes folder. I replaced all the crystal report jar with Crystal Report 2008 jars, modified the web.xml and the CRConfig.xml file accordingly. When I opened the report it gave me an error.
When the following line was execuated in the jsp:
reportClientDocument.open(report, 0);
it gave me following error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: There is no server specified.---- Error code:-2147217390 Error code name:serverNotFound
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.do(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initialize(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ClientDocument.new(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source)
     at com.ibm._jsp._MessageStatusRpt.jbInit(_MessageStatusRpt.java:196)
     at com.ibm._jsp._MessageStatusRpt._jspService(_MessageStatusRpt.java:313)
     at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:87)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1146)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:592)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:524)
     at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:122)
     at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:232)
     at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3548)
     at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:269)
     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:818)
     at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:125)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:267)
     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
     at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
     at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
     at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
     at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
     at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
     at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
     at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1497)
[1/15/10 17:37:40:703 IST] 00000026 ServletWrappe E   SRVE0068E: Uncaught exception thrown in one of the service methods of the servlet: /reports/jsps/MessageStatusRpt.jsp. Exception thrown : java.lang.NullPointerException
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.f(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getReportSource(Unknown Source)
     at com.ibm._jsp._MessageStatusRpt._jspService(_MessageStatusRpt.java:314)
     at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:87)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1146)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:592)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:524)
     at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:122)
     at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:232)
     at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3548)
     at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:269)
     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:818)
     at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:125)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:267)
     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
     at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
     at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
     at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
     at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
     at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
     at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
     at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1497)
[1/15/10 17:37:40:703 IST] 00000026 WebApp        E   [Servlet Error]-[/reports/jsps/MessageStatusRpt.jsp]: java.lang.NullPointerException
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.f(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getReportSource(Unknown Source)
     at com.ibm._jsp._MessageStatusRpt._jspService(_MessageStatusRpt.java:314)
     at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:87)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1146)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:592)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:524)
     at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:122)
     at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:232)
     at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3548)
     at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:269)
     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:818)
     at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:125)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:267)
     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
     at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
     at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
     at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
     at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
     at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
     at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
     at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1497)

Hello Ted,
As per the samples in the link provided by you I identified that the following statement was missing.
reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
After adding this statement the jsp was not able to compile, it gave me an error:
ReportClientDocument.inprocConnectionString cannot be resolved
Now my queries are:
1. What is Report Application server(RAS)?
2. Is it required to set Report application server in JSP page? It was not required in Crystal Reports XI. If YES, then how to configure RAS inside our applications WAR file?
3. I am using WebSphere Application Server for deploying the WEB Archive file (WAR file). The Crystal Reports 2008 library (JARS) are embedded inside the WEB-INF/lib folder. How to specify the RAS server inside thhe WAR file? Is it some XML configuration file which we have to keep at WEB-INF level? Or we have to modify the existing CRConfig.xml file?
4. I would like to mention here that we have bundled crystalreportviewers12/ folder in our WAR file at the same level where reports JSP pages exits.
Thanks in advance.

Deployment of a crystal report application with visual 2005

Similar Messages

Maybe you are looking for